A poorly maintained sewing machine can quickly become problematic. If too much grease is applied, it may eventually harden and cause more issues. It's advisable to use sewing machine oil and a small amount of grease for optimal performance.
Hello my friend, yes you're absolutely right 👍, it's recommended to use sewing machine oil, but I use general purposes oil sometimes it works but not for best performance, thick oil or too much grease can cause rotation slow down, I used too much grease and I let machine running for a while so all leftover or extra grease or oil had been cleaned out, Thank you and all the best 😌🙏
Hello, I recently got the same machine as second hand and having issue with the bobbin thread hook picking up timing is not in sync. How can I fix this problem.?I have opened the bottom cover and check the bars and gear, which screws on the gear to adjust. Can not find service manual anywhere. Stuck at this point. Please help or give me some suggestions. So happy that I found your video. Thank you.
Hello my friend, here are some tips may help youvto fix thus problem. 1- If the bobbin housing is moving correctly and smoothly it shouldn't be any problem, you need to look some where else issues, 2- if the bobbin housing ir casing is not sitting right or making unusual sound then you need to check in details if there's something not right ? If you have another bobbin housing try to replace it to see if that can fix the problem. 3- bobbin housing moves accordingly with other movements and needle as moves up and down all must be time correctly, which is called movements timing, sometimes fir some reason bobbin housing moves tiny little ahead or late can can cause needle not picking up the thread so it won't sew, To Fix this problem you need to find the right position for the right moving and to do that: Loose the shift holder going to bobbin casing and try to mark every time you move it little bit either to the left or right tight it rotate the machine with your hand slowly to see what I'd the correct position until you find it tight down and done. 4- sometimes all you need is to replace the needle can cause not picking up the thread the needles are different sizes and numbers. 5- open the cover for the rod holds to the needle there's a screw try to loosed it you need to lower the needle rod moves up and down do little bit of each time and tight rotate the machine with your hand to see if that's fx the problem, if not repate the step until you find the correct position, hook up timing. I will send youva video link Thank you 😊 and all the best
Hello, thank you so much for this video! Any idea how do we adjust the tension of the lower thread? I just got this machine 2nd hand and the bobbin tension is super off :(
Hi my friend, the bobbin case has tyni flat secrow on the Tensioner of the bobbin case you need tyni flat secrow driver, Tighten for tension, the best way to adjust the bobbin tension is when the bobbin inside the bobbin case tight the scrow and pull the thread until you get the right thread tension, thank you so much and all the best 👌 👍 😍
Hello my friend, it's my pleasure to read your wonderful comment, I will upload more videos soon, I will notify you, thank you so much and all the best 🙏❤️
@@WorldRandomVideos Thank you so much, I have not been able to use my machine in about 3 years since I got it. I'm trying to fix it myself now. I will patiently wait for your video. Thank you for your reply sir.
hi, your video is very helpful! but I wanted to ask you for help, I have a Singer Melodie 100 and to clean it I removed the coil box, but I don't know how to put it back, could you help me maybe with a video? I would be very grateful
Hello my friend, I don't understand what do you mean coil box ? Can you send me a video or a picture to my email sarge1973@gmail.com I don't have same model singer melodie 100, but if I receive your video or picture I will try my best to help , thank you so much and all the best
Many Many thanks 😊 🙏, some sewing machines slow down after applying grease , to be safe always use fully synthetic sewing machine oil if you don't have use DW40 Sprayer, is the best or use car engine oil but some sewing mechine will slow little bit because the car engine oil thick, so the thinner oil is much better than thick oil, all the best 👌 👍
I have just been giver me this 2nd sewing machine and I watched your video when you took the top cover off you oiled it could you tell me what red stuff you used on the end of the long stick please
Hello my friend, the red stuff I used is mechanical multi purpose grease it works like oil but last very long time so I don't have to oil the machine again at least for few years, This grease works like lubricant and reduce the noise and makes the sewing machine runs very smooth. It's not important to use such grease , if you have sewing machine oil works just fine but you still need to add oil from time to time it depends on usages, however some sewing machine if you add grease or thick oil they can slow the machine down in this case you need to use DW40 while machine is running so the sewing machine can spins faster again, then use sewing machine oil which is recommended to all types of machines, thank you and all the best 👌 👍
@@anndavies6717 hi friend, you can buy it from princess auto, www.princessauto.com/shell-gadus-s4-v600ac-15-grease/product/PA0009045808 You can buy sewing machine oil from walmart www.walmart.ca/en/ip/unique-creativ-sewing-machine-oil-clear/6000196937551
Hello my friend, I should show or say the model number in my video but I forgot, Singer Made in Brazil MODEL NUMBER 5808C The model number is located beside the power switch under the factory label, thank you and all the best
Hello my friend, If the sewing machine not working at all please try the following troubleshooting steps 1- check the power cord (power cable) make sure doesn't have cut or shortage, to do that you need multimeter DC voltage and Ac voltage to test it، if power cable is not working just replace it, 2- if nothing wrong with power Cord check and test sewing machine motor, you need multimeter, choose continuity wth multimeter 2 probes touch wires on motor connectors legs if no reading or sound at all that means motor is burned, must be replaced, 3- check the foot pedal maybe it's not working,.
Hello my dear friend, awesome, those old machines can last for ages especially if they kept maintained, the needle touching bottom there are several causes let's start with easy one 1- check needle should be tight and at the right position all the way up, check the needle size too if it's universal or for specific machines 2- you can adjust the needle piston rod by loose screw or bolt and left it up little bit just right height 3- check the bubbling housing or bubbling case to make sure it's at the right position and right rotation if not you may Dissemble it clean it, sometimes this is not easy because timing must be perfect so you can watch videos or read the use manual to install it just right Thank you and all the best 👍 🙏
@@WorldRandomVideos thanks a lot. That is big help for me.. And also i watch the rest of your videos here. and i will do right after while watching some of your videos.😍😍😍❤❤❤
Hello my dear friend, please try the following troubleshooting step by step, 1- check the tensioner you need to put it just on right tension, the best way is to try operating the machine and change tensioner number 3-4-5 until you get it on right position, 2- sometimes cause by the thread if it is thick or bad threads can cause tangling 3- change the needle, I had same problem before when I changed the needle the problem was solved, the needles have numbers and sizes. 4- some cases this cause by using wrong fabric, some Machines can't work well with specific fabrics such as stretchy or thick or rough etc, try to change the fabric, 5- make sure the Sowing machine bubbling thread is set right , try to change it, try to tight it little by using small screw on the bubbling case, I hope that will help you to figure out, thank you and all the best 👍
Hello my friend, usually tension or tension let doesn't need maintenance but sometimes silk or threads or dirts stuck inside or for some reason Tensioner spring or washers get stuck so in this cases Tensioner must be services and maintenance, also sometimes Tensioner hit by something it makes it bend little bit, check open Tensioner and cleaning make sure spring is ok, Tensioner is very important to have it set just at the right tension otherwise sewing machine will not work well, most best settings at #3 but it also depends on thickness of the threads and type of the machine, best way to set it right you need to try until you find the right tension setting. Thank you and all the best 👌 👍.
Hello my dear friend, there are several causes for missing stitches or skipping please follow troubleshooting step by step 1- replace needle, some needle doesn't work well with a specific machines 2- replace threads, bad threads can cause skipping or missing stitches, replace bubbling threads also its recommended to use same threads 3- adjust tensioner, it's very important to set the tensioner just at right number, tensioner not set at right position can cause skipping missing or tangling threads etc 4- after all steps and still missing stitches, you need to adjust The Timing Machine Is Off Sometimes the timing on your machine can become mistuned. What this means is that the hook on the bobbin case that is supposed to catch the thread from the needle misses it, either being slightly too early or too late, which will result in skipped stitches as the stitch won’t form. This can be caused by the needle striking the needle plate or something in your project it couldn’t penetrate easily. Sometimes things end up loosening or getting jiggled over time within the machine, or sometimes with newer digital machines, there could be an issue with its circuit board. Thank you and all the best 👍
Pls help, mine is Brazil made CAT W2C3 11 am have trouble with threading and winding the bobbin. It's a top drop - in machine. I lost the manual. Kindly advise on how to get one.
Hello my friend, unfortunately I couldn't find user manual for the model CAT W2C3 11 however some of website can't be open for some reason, however I found this website similar to your question try it maybe will be helpful, thank you and all the best. www.fixya.com/support/t11323414-online_manual_singer_wzc3_8
@dinatembo5144, my pleasure 😊, I also tried online search but I couldn't find any information, there are many products information or user manual can't be found anymore online, thank you and all the best
Paman bagaimana cara memperbaiki presser Bar yang mempengaruhi jarum membentur presser foot yang miring pada model mesin jahit singer 5805 C portable, bila ada videonya mohon share, Terimakasih
Hello my friend, thank you 😊 for your wonderful comment and for your question, this cause by several reasons, please try to follow these steps hopefully to find out the problem and fix it, unfortunately I don't have a specific video about presser bar yet m, I have been busy at work but I am planning to upload more videos this winter about Sewing Machines problems and issues and how to fix and maintenance. 1- deassemble the sewing machine remove the Cover and take a look inside, check the spinning shaft or main rotation shaft drives the bubbing housing and pressure foot, it could be loosed or out of adjustment, there is a screw or bolt holding it in place try to lose that screw and rotate the main shaft with your hand until you find the right position, there's another small spining bar connected with main shaft , that small spinning bar makes the pressure foot movement , the small bar connected with tray to the pressure foot, check if there's missing or loosed springs or loosed screws. 1- the presser bar could be loosed or moved little from factory position, to fix this you need to deassemble the cover so you can see the presser bar inside, check if it's loosed there's a screw holding it in place, if it has been moved try to places it at the original factory place. 3- if the preser foot is in right place not loosed or moved , did you try to check if the pressure foot has been replaced to different size? If not go to this step 4- check presser bar by hand see if it's wiggling or loosed if so then you need to fix it or readjusted. I hope that can help you to figure out and if I made any video soon I will let you know in main time if I find helpful video on RUclips I will send a link to you, all the best. Ali Alnajjar
Hello my dear friend, why it doesn't work?, there are many causes, if you really me what brand name or model and what's the reason I may be able to help you, thank you and all the best 👍
@@WorldRandomVideos after I wind the bobbin for about 5 seconds, it starts to emit a beeping noise and the machine doesn't function well when I use the foot pedal.
Hello my dear friend, please try the following troubleshooting step by step 1- when sewing machines can't turn or spin or hard to turn this means it's jammed or siezed, to fix this problem you need to The assemble the sewing machine and spray DW40 first on all mechanical movements and all joints and gears while you spin it with your hand slowly, then use seeing machines oil or lubricant this will help to spin freely, if still stuck or hard to spin check if there's any dirt or corrosion must be cleaned well, if still not spinning smoothly, it could be bad parts or loosed or maybe object stuck inside the mechanical movements. 2- if the sewing machine spins easily with your hand but it doesn't when you press foot Puddle this means the belt is loosed or bad you need to check it, or maybe bad motor need to be replaced, sometimes motor can get jammed or siezed so remove the belt and press foot puddle the motor should spin fast and hard try to stop it with piece of cardboard or touch it if it stop easily means bad motor a good motor should be spinning fast and strong 3- if all good and pass then the only thing left is the foot puddle maybe is bad or not working well try to replace it. I hope this will help you to figure out, let me know how it goes, Thank you and all the best 👍
Hello my friend, it should be screw just off 5he center of the handwheel, remove it, then remove center Bolt or loose it, it still not coming out, there's screw size Allenkey small inside behind the handwheel connect handwheel with spinning rod remove it and it should come out, I hope this will help you this information what I remember however every sewing machine has different way to remove handwheel thank you and all the best.
Why didn't you clean the fuzz and dirt out of it before you oiled and greased it, I would never dream of using car oil or car gear grease on my machine and Definitely not n the excessive amount that you used. You would never have an project that wasn't covered in oil spots when you were through.
Hello my friend, thank you for your important concern and useful comment, yes definitely I should had clean it first before adding oil, and you are right using car engine oil or multi purpose grease it's not the best and not recommended especially for some sewing machines it can slow it down little bit, it's the best to use sewing machine oil but I didn't have so that's why I use it, it was not good to use a lot of grease or oil I made a mess,but after use few times it was working excellent, thank you again and all the best 😊
hallo mein Freund, das ist schön, dass wir dieselbe Nähmaschine haben, es ist gut zu wissen, ich liebe Nähmaschinen. Meine beiden Brüder und meine Schwester hatten früher ihr eigenes Nähgeschäft, aber ich habe keine Zeit zum Nähen, ich mache lieber Wartungsarbeiten und repariere sie. Übrigens, dein Kanal ist großartig, vielen Dank und alles Gute 🙏💓🙏. hello my friend, that's nice we have same sewing machine, it's good know, I love sewing machines my 2 brothers and my sister they used to have thier own sewing shop, but I don't have time to sew, I like to do maintenance and fix them، by the way your channel is awesome thank you so much and all the best 🙏💓🙏💓
A poorly maintained sewing machine can quickly become problematic. If too much grease is applied, it may eventually harden and cause more issues. It's advisable to use sewing machine oil and a small amount of grease for optimal performance.
Hello my friend, yes you're absolutely right 👍, it's recommended to use sewing machine oil, but I use general purposes oil sometimes it works but not for best performance, thick oil or too much grease can cause rotation slow down, I used too much grease and I let machine running for a while so all leftover or extra grease or oil had been cleaned out,
Thank you and all the best 😌🙏
Hello,
I recently got the same machine as second hand and having issue with the bobbin thread hook picking up timing is not in sync. How can I fix this problem.?I have opened the bottom cover and check the bars and gear, which screws on the gear to adjust. Can not find service manual anywhere. Stuck at this point. Please help or give me some suggestions. So happy that I found your video.
Thank you.
Hello my friend, here are some tips may help youvto fix thus problem.
1- If the bobbin housing is moving correctly and smoothly it shouldn't be any problem, you need to look some where else issues,
2- if the bobbin housing ir casing is not sitting right or making unusual sound then you need to check in details if there's something not right ? If you have another bobbin housing try to replace it to see if that can fix the problem.
3- bobbin housing moves accordingly with other movements and needle as moves up and down all must be time correctly, which is called movements timing, sometimes fir some reason bobbin housing moves tiny little ahead or late can can cause needle not picking up the thread so it won't sew,
To Fix this problem you need to find the right position for the right moving and to do that:
Loose the shift holder going to bobbin casing and try to mark every time you move it little bit either to the left or right tight it rotate the machine with your hand slowly to see what I'd the correct position until you find it tight down and done.
4- sometimes all you need is to replace the needle can cause not picking up the thread the needles are different sizes and numbers.
5- open the cover for the rod holds to the needle there's a screw try to loosed it you need to lower the needle rod moves up and down do little bit of each time and tight rotate the machine with your hand to see if that's fx the problem, if not repate the step until you find the correct position, hook up timing.
I will send youva video link
Thank you 😊 and all the best
ruclips.net/video/LmEtmnkDIS8/видео.html
Hi there. Thank you very much for this video. It was very useful. My machine needed maintenance ASAP!
My pleasure 😁, I am glad to read your wonderful comment, many many thanks and appreciation and all the best 🙏💖
Hello, thank you so much for this video! Any idea how do we adjust the tension of the lower thread? I just got this machine 2nd hand and the bobbin tension is super off :(
Hi my friend, the bobbin case has tyni flat secrow on the Tensioner of the bobbin case you need tyni flat secrow driver, Tighten for tension, the best way to adjust the bobbin tension is when the bobbin inside the bobbin case tight the scrow and pull the thread until you get the right thread tension, thank you so much and all the best 👌 👍 😍
Thank you for this video, please do you have a video on how to fix a jammed reverse stitch button on a Singer contempra 930. Thank you.
Hello my friend, it's my pleasure to read your wonderful comment, I will upload more videos soon, I will notify you, thank you so much and all the best 🙏❤️
@@WorldRandomVideos Thank you so much, I have not been able to use my machine in about 3 years since I got it. I'm trying to fix it myself now. I will patiently wait for your video. Thank you for your reply sir.
@aanuoluwafaith5345 it's my pleasure 😊, thank you so much 🙏 and all the best
hi, your video is very helpful! but I wanted to ask you for help, I have a Singer Melodie 100 and to clean it I removed the coil box, but I don't know how to put it back, could you help me maybe with a video? I would be very grateful
Hello my friend,
I don't understand what do you mean coil box ? Can you send me a video or a picture to my email
sarge1973@gmail.com
I don't have same model singer melodie 100, but if I receive your video or picture I will try my best to help , thank you so much and all the best
Hi thank you for showing how to serves sewing machine I have a singers Melodie 70 whit the name of the grease to use
Many Many thanks 😊 🙏, some sewing machines slow down after applying grease , to be safe always use fully synthetic sewing machine oil if you don't have use DW40 Sprayer, is the best or use car engine oil but some sewing mechine will slow little bit because the car engine oil thick, so the thinner oil is much better than thick oil, all the best 👌 👍
I have just been giver me this 2nd sewing machine and I watched your video when you took the top cover off you oiled it could you tell me what red stuff you used on the end of the long stick please
Hello my friend, the red stuff I used is mechanical multi purpose grease it works like oil but last very long time so I don't have to oil the machine again at least for few years,
This grease works like lubricant and reduce the noise and makes the sewing machine runs very smooth.
It's not important to use such grease , if you have sewing machine oil works just fine but you still need to add oil from time to time it depends on usages, however some sewing machine if you add grease or thick oil they can slow the machine down in this case you need to use DW40 while machine is running so the sewing machine can spins faster again, then use sewing machine oil which is recommended to all types of machines, thank you and all the best 👌 👍
@Multi Channel thank you for the reply where would I buy the mechanical purpose grease from would you advice me where I could get it from ps 😀
@@anndavies6717 hi friend, you can buy it from princess auto,
www.princessauto.com/shell-gadus-s4-v600ac-15-grease/product/PA0009045808
You can buy sewing machine oil from walmart
www.walmart.ca/en/ip/unique-creativ-sewing-machine-oil-clear/6000196937551
I have the same sewing machine and I need to order extra bobbins and needle. I wonder what is the Model? thanks
Hello my friend, I should show or say the model number in my video but I forgot,
Singer Made in Brazil
MODEL NUMBER 5808C
The model number is located beside the power switch under the factory label, thank you and all the best
شكرا لقد أفدتني كثيرا.
سروري، شكرا لك حفظك الله ورعاك
Hello. My sewing machine doesn't work even if it's plugged in. But the light is turning on. Its the same model as this. Hope you can help me.
Hello my friend,
If the sewing machine not working at all please try the following troubleshooting steps
1- check the power cord (power cable) make sure doesn't have cut or shortage, to do that you need multimeter DC voltage and Ac voltage to test it، if power cable is not working just replace it,
2- if nothing wrong with power Cord check and test sewing machine motor, you need multimeter, choose continuity wth multimeter 2 probes touch wires on motor connectors legs if no reading or sound at all that means motor is burned, must be replaced,
3- check the foot pedal maybe it's not working,.
i know this is 2 yrs ago. I have that kind of seqing machine looks like. 5802C Singer. My problem at my machine at the needles touching the botton
Hello my dear friend, awesome, those old machines can last for ages especially if they kept maintained, the needle touching bottom there are several causes let's start with easy one
1- check needle should be tight and at the right position all the way up, check the needle size too if it's universal or for specific machines
2- you can adjust the needle piston rod by loose screw or bolt and left it up little bit just right height
3- check the bubbling housing or bubbling case to make sure it's at the right position and right rotation if not you may Dissemble it clean it, sometimes this is not easy because timing must be perfect so you can watch videos or read the use manual to install it just right
Thank you and all the best 👍 🙏
@@WorldRandomVideos thanks a lot. That is big help for me.. And also i watch the rest of your videos here. and i will do right after while watching some of your videos.😍😍😍❤❤❤
This is also big big helpfull.
@user-xm4pb5tc1r , it's my pleasure 🙏, I really appreciate you ❤️, and I am glad to help 😊, thank again and best regards
@@joanasaludares-f4h, I am glad to help, Best regards
Thank you for watching 👀 🙏
Por qué pasa el hilo de arriba flojo y se enreda en la parte de abajo
Hello my dear friend, please try the following troubleshooting step by step,
1- check the tensioner you need to put it just on right tension, the best way is to try operating the machine and change tensioner number 3-4-5 until you get it on right position,
2- sometimes cause by the thread if it is thick or bad threads can cause tangling
3- change the needle, I had same problem before when I changed the needle the problem was solved, the needles have numbers and sizes.
4- some cases this cause by using wrong fabric, some Machines can't work well with specific fabrics such as stretchy or thick or rough etc, try to change the fabric,
5- make sure the Sowing machine bubbling thread is set right , try to change it, try to tight it little by using small screw on the bubbling case,
I hope that will help you to figure out, thank you and all the best 👍
Does the tensioner needs to be serviced? my singer 9805c seems tension too much and line keeps breaking, any tips please?
Hello my friend, usually tension or tension let doesn't need maintenance but sometimes silk or threads or dirts stuck inside or for some reason Tensioner spring or washers get stuck so in this cases Tensioner must be services and maintenance, also sometimes Tensioner hit by something it makes it bend little bit, check open Tensioner and cleaning make sure spring is ok, Tensioner is very important to have it set just at the right tension otherwise sewing machine will not work well, most best settings at #3 but it also depends on thickness of the threads and type of the machine, best way to set it right you need to try until you find the right tension setting.
Thank you and all the best 👌 👍.
@@WorldRandomVideos thank you very much. I apreciate
@RicardoOedietram my pleasure 🙏
how do you change the direction of the sewing forward or towards you on that machine
Hello my friend, press and hold the button on the center of the speed Dial to reverse, thank you and all the best 🙏❤️
How do i adjust the timing? I miss every 5th or so stitch
Hello my dear friend, there are several causes for missing stitches or skipping please follow troubleshooting step by step
1- replace needle, some needle doesn't work well with a specific machines
2- replace threads, bad threads can cause skipping or missing stitches, replace bubbling threads also its recommended to use same threads
3- adjust tensioner, it's very important to set the tensioner just at right number, tensioner not set at right position can cause skipping missing or tangling threads etc
4- after all steps and still missing stitches, you need to adjust The Timing Machine Is Off
Sometimes the timing on your machine can become mistuned. What this means is that the hook on the bobbin case that is supposed to catch the thread from the needle misses it, either being slightly too early or too late, which will result in skipped stitches as the stitch won’t form. This can be caused by the needle striking the needle plate or something in your project it couldn’t penetrate easily. Sometimes things end up loosening or getting jiggled over time within the machine, or sometimes with newer digital machines, there could be an issue with its circuit board.
Thank you and all the best 👍
Very helpful tutorial 💫👍
Thank you so much 👌 💓 and all the best 👌 👍
@@WorldRandomVideos thank you too ❤️
Pls help, mine is Brazil made CAT W2C3 11 am have trouble with threading and winding the bobbin. It's a top drop - in machine. I lost the manual. Kindly advise on how to get one.
Hello my friend, unfortunately I couldn't find user manual for the model CAT W2C3 11 however some of website can't be open for some reason, however I found this website similar to your question try it maybe will be helpful, thank you and all the best.
www.fixya.com/support/t11323414-online_manual_singer_wzc3_8
@@WorldRandomVideos Thank you for your help. I couldn't find the machine I want on the named website.
@dinatembo5144, my pleasure 😊, I also tried online search but I couldn't find any information, there are many products information or user manual can't be found anymore online, thank you and all the best
Paman bagaimana cara memperbaiki presser Bar yang mempengaruhi jarum membentur presser foot yang miring pada model mesin jahit singer 5805 C portable, bila ada videonya mohon share, Terimakasih
Hello my friend, thank you 😊 for your wonderful comment and for your question, this cause by several reasons, please try to follow these steps hopefully to find out the problem and fix it, unfortunately I don't have a specific video about presser bar yet m, I have been busy at work but I am planning to upload more videos this winter about Sewing Machines problems and issues and how to fix and maintenance.
1- deassemble the sewing machine remove the Cover and take a look inside, check the spinning shaft or main rotation shaft drives the bubbing housing and pressure foot, it could be loosed or out of adjustment, there is a screw or bolt holding it in place try to lose that screw and rotate the main shaft with your hand until you find the right position, there's another small spining bar connected with main shaft , that small spinning bar makes the pressure foot movement , the small bar connected with tray to the pressure foot, check if there's missing or loosed springs or loosed screws.
1- the presser bar could be loosed or moved little from factory position, to fix this you need to deassemble the cover so you can see the presser bar inside, check if it's loosed there's a screw holding it in place, if it has been moved try to places it at the original factory place.
3- if the preser foot is in right place not loosed or moved , did you try to check if the pressure foot has been replaced to different size?
If not go to this step
4- check presser bar by hand see if it's wiggling or loosed if so then you need to fix it or readjusted.
I hope that can help you to figure out and if I made any video soon I will let you know in main time if I find helpful video on RUclips I will send a link to you, all the best.
Ali Alnajjar
Baik paman akan saya lakukan, terimakasih banyak atas saran dan ilmunya🙏
My pleasure 😊 🙏, and Best regards 😀
Hello. My machine doesn't work😢 the turning wheel is stuck. May I seek your kind assistance?
Hello my dear friend, why it doesn't work?, there are many causes, if you really me what brand name or model and what's the reason I may be able to help you, thank you and all the best 👍
@@WorldRandomVideos the brand is Singer 5806c.
@@WorldRandomVideos after I wind the bobbin for about 5 seconds, it starts to emit a beeping noise and the machine doesn't function well when I use the foot pedal.
Hello my dear friend, please try the following troubleshooting step by step
1- when sewing machines can't turn or spin or hard to turn this means it's jammed or siezed, to fix this problem you need to The assemble the sewing machine and spray DW40 first on all mechanical movements and all joints and gears while you spin it with your hand slowly, then use seeing machines oil or lubricant this will help to spin freely, if still stuck or hard to spin check if there's any dirt or corrosion must be cleaned well, if still not spinning smoothly, it could be bad parts or loosed or maybe object stuck inside the mechanical movements.
2- if the sewing machine spins easily with your hand but it doesn't when you press foot Puddle this means the belt is loosed or bad you need to check it, or maybe bad motor need to be replaced, sometimes motor can get jammed or siezed so remove the belt and press foot puddle the motor should spin fast and hard try to stop it with piece of cardboard or touch it if it stop easily means bad motor a good motor should be spinning fast and strong
3- if all good and pass then the only thing left is the foot puddle maybe is bad or not working well try to replace it. I hope this will help you to figure out, let me know how it goes,
Thank you and all the best 👍
@@WorldRandomVideos Thanks for your kind help. I will check it first
Sir, I need to replace my handwheel..the inner piece plastic broke.. 😢
Hello my friend, it should be screw just off 5he center of the handwheel, remove it, then remove center Bolt or loose it, it still not coming out, there's screw size Allenkey small inside behind the handwheel connect handwheel with spinning rod remove it and it should come out, I hope this will help you this information what I remember however every sewing machine has different way to remove handwheel thank you and all the best.
Can this machine label clothes?
No, it doesn't label clothes, it's just a regular sewing machine, thank you so much and all the best
@@WorldRandomVideos thank you for the quick reply.👍
My pleasure 🙏
Why didn't you clean the fuzz and dirt out of it before you oiled and greased it, I would never dream of using car oil or car gear grease on my machine and Definitely not n the excessive amount that you used. You would never have an project that wasn't covered in oil spots when you were through.
Hello my friend, thank you for your important concern and useful comment, yes definitely I should had clean it first before adding oil, and you are right using car engine oil or multi purpose grease it's not the best and not recommended especially for some sewing machines it can slow it down little bit, it's the best to use sewing machine oil but I didn't have so that's why I use it, it was not good to use a lot of grease or oil I made a mess,but after use few times it was working excellent, thank you again and all the best 😊
It was too fast when you threaded the needle and then put the threaded bobbin 🧵
Hello my friend, I am sorry I had to seed up my video because it was too long, thank you so much 🙏😔 and all the best ❣️
Boss !
Thank you so much and all the best 🙏🙏🙏❤️❤️❤️
I need kabel pedal
I am sorry, I don't understand what do you mean?
What a sloppy mess grease everywhere 😂😂😂😂😂 too much car engine oil
Yes I made a big a mess, to clean too much grease or oil use DW40 and cleaning cloths to wipe out extra oil, thank you and all the best 😁
Quel gabegie d’huile ton ouvrage va être dégueulasse
😀Mein Singer Video schaut so aus: ruclips.net/video/y0JygSgcTSY/видео.htmlsi=j8PhgEyV4E7Qc9pV We have the same sewing machine😀👋
hallo mein Freund, das ist schön, dass wir dieselbe Nähmaschine haben, es ist gut zu wissen, ich liebe Nähmaschinen. Meine beiden Brüder und meine Schwester hatten früher ihr eigenes Nähgeschäft, aber ich habe keine Zeit zum Nähen, ich mache lieber Wartungsarbeiten und repariere sie. Übrigens, dein Kanal ist großartig, vielen Dank und alles Gute 🙏💓🙏.
hello my friend, that's nice we have same sewing machine, it's good know, I love sewing machines my 2 brothers and my sister they used to have thier own sewing shop, but I don't have time to sew, I like to do maintenance and fix them، by the way your channel is awesome thank you so much and all the best 🙏💓🙏💓