Ebay bro, I don't have a link because I bought them from a private seller but there is a lot of wreckers that sell them bro but they are very expensive so just keep searching for an opportunity bro.
No bro mine clicked right on and mine was s 12 laredo also, so not to sure, maybe you'll have issues on the lower part of the bumper as mine was broken and don't know if my issues were because of the damage mine had but the ones on the fenders were a perfect match bro,👍✌
Hi man. Good jop. l want top transform mine asell. its a 2014 limited and lm in South Africa. Can you help me with links to buy staff. And the rear bumper is for which year?
I'm pretty sure you can but may need the 2018 brackets for the bottom to hold on but I would buy just the bumper and then buy the brackets in case you need to bro.👍✌
Looks good Gus. What kind of bondo do you prefer for the plastic bumpers ? I normally hit the junk yard, Ebay, or Amazon, but some of the bumper covers are hard to find or to expensive. I like U-Pol products and I see they have 5001 Isopon Plastic bumper filler. Have you ever used it or do you have your own preference. That hood scoop would look good, but if it isn't to late I'd take a couple photos and ask the manufacturer about the left, "drivers side", warpage. That's going to be hard to pull & keep down. Lots of work moulding that to the hood. Your the man, it'll look good when your done.
I really don't have a preference on bondo bro I just use whatever bondonis at my local auto parts store and about the warped area they told me they can't do nothing about it bro because supposedly It was my responsibility to check it upon delivery and dont receive it lol but I'm still hesitating on installing it but we'll see bro👍✌
I bought the rear ones used on facebook market bro locally, there's quite a bit of crashed srt jeeps on the FB market place. But I'm still looking for the front ones online.👍✌
Hey man is that bumper srt look alike from duraflex ? If so was it just bolt on or do you need to buy brackets or some sort ?? And amazing work all around bro 🙏
Yea bro and it doesn't need any special brackets it hooks right to the existing brackets but the bottom plastic the one underneath the car I can't say because my jeep didn't have it so I just bolted it down with self tapping screws bro but everything else attaches perfectly. 👍✌
Hey man I’m have extensive auto body experience. To keep that Hindi from breaking. Put fiberglass hairs IN the bondo. TRUST ME. It’s actually called RONDO there’s a few RUclips videos already.
Might be but it's just a project, not really gonna race it it's just for looks bro that's mainly what my channel is about, paint and small custom jobs not any engine modifications for more speed.👍✌
check out more of this project and other projects by clicking here #REBUILDMAFIA
AND DON'T FORGET TO SUBSCRIBE 👍✌
Love your videos
Esperaba escuchar en español
Tengo un canal en español pero casi no e subido videos pero se llama
cali reconstruibles por si gustas echarle una vista, saludos👍✌
Quick question where you order you’re fender flares from ??
Ebay bro, I don't have a link because I bought them from a private seller but there is a lot of wreckers that sell them bro but they are very expensive so just keep searching for an opportunity bro.
Can I put a 2020 bumper and headlights on a 2012 srt8 without changing fenders and hood?
Pretty sure you can bro
Did you have to change the bumper brackets ? I'm doing the same thing and noticed the clips of bumper won't set in. I have a 2011 laredo
No bro mine clicked right on and mine was s 12 laredo also, so not to sure, maybe you'll have issues on the lower part of the bumper as mine was broken and don't know if my issues were because of the damage mine had but the ones on the fenders were a perfect match bro,👍✌
@@CALIREBUILDABLES appreciate it foreal. Your videos really came in handy for this build
Glad they helped bro👍
Where you guys located
CenCali bro👍✌
What sand paper did you used
Hi man. Good jop. l want top transform mine asell. its a 2014 limited and lm in South Africa. Can you help me with links to buy staff. And the rear bumper is for which year?
I have all the links in my newer srt clone videos bro, and the rear bumper is for the 11 -14 but it's custom made👍✌️
Where did you buy the bumper.
Front one on ebay I have the link in description and the rear bumper was bought locally on Facebook market place bro👍✌
I have a 2015 Grand Cherokee Altitude, do you know by any chance if my factory upper grille would fit with the srt bumper.?
Yes it does bro but you need to buy the srt bumper for your car's specific year in this case 2015 srt bumper and it should fit perfectly
Looking good bro
Thanks bro👍✌
I came to San Jose CA from Seattle WA
@@natekastel7050 oh snap to pick up a car?
No bro lol came to visit the in-laws
@@natekastel7050 oh ok nice, have a safe trip bro👍✌
Can I put 2018 bumper on 2014 grand cherokee?
I'm pretty sure you can but may need the 2018 brackets for the bottom to hold on but I would buy just the bumper and then buy the brackets in case you need to bro.👍✌
Looks good Gus. What kind of bondo do you prefer for the plastic bumpers ? I normally hit the junk yard, Ebay, or Amazon, but some of the bumper covers are hard to find or to expensive. I like U-Pol products and I see they have 5001 Isopon Plastic bumper filler. Have you ever used it or do you have your own preference. That hood scoop would look good, but if it isn't to late I'd take a couple photos and ask the manufacturer about the left, "drivers side", warpage. That's going to be hard to pull & keep down. Lots of work moulding that to the hood. Your the man, it'll look good when your done.
I really don't have a preference on bondo bro I just use whatever bondonis at my local auto parts store and about the warped area they told me they can't do nothing about it bro because supposedly It was my responsibility to check it upon delivery and dont receive it lol but I'm still hesitating on installing it but we'll see bro👍✌
Where did you get the fender flares?
I bought the rear ones used on facebook market bro locally, there's quite a bit of crashed srt jeeps on the FB market place. But I'm still looking for the front ones online.👍✌
It is coming along nicely. I would probably do the whole hood though.
Thanks bro yea I'm thinking about not using it but we'll see👍✌
Hey man is that bumper srt look alike from duraflex ? If so was it just bolt on or do you need to buy brackets or some sort ?? And amazing work all around bro 🙏
Yea bro and it doesn't need any special brackets it hooks right to the existing brackets but the bottom plastic the one underneath the car I can't say because my jeep didn't have it so I just bolted it down with self tapping screws bro but everything else attaches perfectly. 👍✌
Nice work 👍🏾
Thanks bro👍✌
👍
Thanks for watching bro I appreciate 👍✌
Cuánto sale $$$ algo así ??
Where did you get that rear bumper?
Looking really good as usual can't wait to see it finished
Thanks bro pretty soon I'll have it ready I hope
Comming out good bro... I know you will find a way to mold that hood scoop. Keep up the great videos.... Shout out to you from México.
Thanks brother we'll see , saludos hasta ZAPOPAN JAL 👍✌
Man be careful my bondo would keep cracking from the vibration on my scoop something diffrent about the hood after the 4th time i gave up
Thanks bro I'll keep it in mind👍✌
Hey man I’m have extensive auto body experience. To keep that Hindi from breaking. Put fiberglass hairs IN the bondo. TRUST ME. It’s actually called RONDO there’s a few RUclips videos already.
Thanks I'll keep that in mind man I appreciate the info , I'm pretty sure it will help a lot of people here👍✌
Sorry but that hood is terrible. Hope you choose not to use it.
I'm debating on it bro I like it but i don't feel confident it would look ok bro but we'll see👍✌
waste of time my man.
Might be but it's just a project, not really gonna race it it's just for looks bro that's mainly what my channel is about, paint and small custom jobs not any engine modifications for more speed.👍✌
Where did you get those fender moldings ?
The front ones on ebay and the rear ones locally on Facebook market place bro👍✌
@@CALIREBUILDABLES thanks bro