Hi, I have a couple of questions if you don't mind. 1. How do I adjust the time/date on my Path Pilot? It's gotten to be about 45 minutes off. You know, when you click on the logo and it turns into a clock. 2. Do you have an active forum somewhere where people post questions or comments about software bugs? 3. Do you know that the DXF function stopped working correctly a long time ago? In Conversational DXF, there is a choice of the path. On, Outside/Right, Inside/Left. These choices don't work any more. It used to be that for example if I upload a drawing of a door lock keyhole, to cut a keyhole, and choose Inside (obviously), it will cut that hole. Now it doesn't I think it goes ON the line always. It makes that whole wonderful DXF function useless. Can you please fix it and test it in you next version release? Thanks
Okay, let’s start with the clock. If some users don’t know, there is a clock hidden under the PathPilot logo. If you click on it, then the clock will appear. To adjust the clock, simply right click on it and the time controls will popup. You also will have the option to synchronize it to internet servers, as long as you have Wi-Fi. To submit a bug or feature request then you will need to fill out this form: tormach.atlassian.net/servicedesk/customer/portal/10/group/33 Your third question might be too complex to address here, so make sure to put in support ticket and our Tormach Technical Team can help you out: tormach.com/how-to-submit-a-support-ticket You could also pose your questions or projects on our Tormach Forums: forums.tormach.com/
@@canardsalle7731 There is a PathPilot Operator Console available for the 8L, but the 15L was designed before we had the Operator Console in mind and the wiring wouldn't be compatible.
Unfortunately, the wiring for the Operator Console on the 15L was deemed too difficult to install so Tormach will not be offering that on that machine. It is available for the Tormach 8L Lathe.
Hi, I have a couple of questions if you don't mind.
1. How do I adjust the time/date on my Path Pilot? It's gotten to be about 45 minutes off. You know, when you click on the logo and it turns into a clock.
2. Do you have an active forum somewhere where people post questions or comments about software bugs?
3. Do you know that the DXF function stopped working correctly a long time ago?
In Conversational DXF, there is a choice of the path. On, Outside/Right, Inside/Left. These choices don't work any more. It used to be that for example if I upload a drawing of a door lock keyhole, to cut a keyhole, and choose Inside (obviously), it will cut that hole. Now it doesn't I think it goes ON the line always. It makes that whole wonderful DXF function useless. Can you please fix it and test it in you next version release?
Thanks
Okay, let’s start with the clock. If some users don’t know, there is a clock hidden under the PathPilot logo. If you click on it, then the clock will appear. To adjust the clock, simply right click on it and the time controls will popup. You also will have the option to synchronize it to internet servers, as long as you have Wi-Fi.
To submit a bug or feature request then you will need to fill out this form: tormach.atlassian.net/servicedesk/customer/portal/10/group/33
Your third question might be too complex to address here, so make sure to put in support ticket and our Tormach Technical Team can help you out: tormach.com/how-to-submit-a-support-ticket
You could also pose your questions or projects on our Tormach Forums: forums.tormach.com/
@@tormachinc Thank you!
Looking smooth !
I like the operators console!!!
I love the operator console!!!
I wouldn't have bought the machine without the console.
And I won't buy the lathe until it gets the console with the lathe firmware
@@canardsalle7731 There is a PathPilot Operator Console available for the 8L, but the 15L was designed before we had the Operator Console in mind and the wiring wouldn't be compatible.
@@tormachinc too bad!
Is the operator console going to be available on the 15L?
Unfortunately, the wiring for the Operator Console on the 15L was deemed too difficult to install so Tormach will not be offering that on that machine. It is available for the Tormach 8L Lathe.
Why isn't it compatible with the 440?
Unfortunately, there's no good way to hold it onto the PCNC 440.