VICTORINOX CYBERTOOL SCHOOL : Adaptation for ALL 4 mm precision bits! [Part 1]
HTML-код
- Опубликовано: 5 авг 2019
- On an great idea of "canne" ( • Victorinox cybertool r... ) but who hadn't explained or shown anything. He had used a 4*2 mm magnet, I preferred to use a 4*1 mm magnet so that the Victorinox ball bits would be better inserted.
So be careful, you shouldn't put more than a tiny drop of glue on it, otherwise it's a disaster!
In addition, it is necessary to have a column of identical magnets to be able to recover the magnet that has come off and misaligned!
Sur une excellente idée de "canne" ( • Victorinox cybertool r... ) mais qui n'avait rien expliqué ni rien montré. Il avait utilisé un aimant 4*2 mm, j'ai préféré utilisé un aimant 4*1 mm de façon à ce que les embouts Victorinox à bille soient mieux insérés.
Alors attention, il ne faut pas mettre plus qu'une toute petite goutte de colle sinon c'est la catastrophe !
En outre, il faut disposer d'une colonne d'aimants identiques pour pouvoir récupérer l'aimant qui se serait décollé et mal orienté ! 
Хобби
![VICTORINOX CYBERTOOL SCHOOL : Adaptation for ALL 4 mm precision bits! [Part 2]](/img/1.gif)
MT VOD * Dear lovers of multi-tools, you can ask me everything, redo a review, insist on a detail, make comparisons, test this or that, I am at your disposal! :) * Multi-Tool VOD
Here is my collection of multi-tools (August 2019) [/S = Brand Sheath]. Each model has been the subject of one or more videos (see my playlist "MULTI-TOOLS").
001- BALADEO Outdoor Cutlery Multi-tool /S
002- BEAR & SON Bear Jaws 155LS /S
003- BÖKER PLUS Tech Tool City 5 /S
004- BUCK Knives X-Tract 730 /S
005- BUCK Knives X-Tract 735BKS-B Essential
006- BUCK Knives BuckTool 350 (MiniBuck)
007- BUCK Knives BuckTool 355 /S
008- BUCK Knives BuckTool 360 /S
009- BYRD ByrdRench BY15P /S
010- COLEMAN Pro Lock /S
011- CRKT Bivy CR9250 (by Hans Florine)
012- CRKT Guppie CR9070 (by Launce Barber)
013- CRKT Technician Multi-tool CR9201 (by Glenn Klecker)
014- CRKT Tool CR9200 (by Ed Van Hoy & Tom Stokes/ with Bit Kit) /S
015- CRKT Zylla-Tool Jr. CR9065K /S
016- CRKT Wooden Multi-Tool Kit CR1035
017- EICKHORN SOLINGEN PRT-II Rescue Knife /Böker S
018- FISKARS Cuts+More
019- GANZO G301-H /S
020- GANZO G302-B /S
021- GERBER Balance /S
022- GERBER Bullrush /S
023- GERBER Center-Drive (with Bit Kit) /S
024- GERBER Crucial /S
025- GERBER Crucial F.A.S.T. (with Hex Bit Kit) /S
026- GERBER Curve
027- GERBER Diesel /S
028- GERBER Dime
029- GERBER Flik /S
030- GERBER Fit /S
031- GERBER Grappler /S
032- GERBER MP1 /S
033- GERBER MP1-MRO (with Bit Kit) /S
034- GERBER MP 400 Compact Sport (05500/ 45500) /S
035- GERBER MP 500 Recoil Auto-Plier /S
036- GERBER MP 600 Bluntnose (old model with 55200 Multi-Plier Pocket Tool Kit) /S
037- GERBER MP 600 Bluntnose Black (07520G1N Carbide Insert Cutters with Tool Kit) /S
038- GERBER MP 600 Pro Scout (07564/ 47564 with Tool Kit) /S
039- GERBER MP 700 Urban Legend /S
040- GERBER MP 800 Legend /S
041- GERBER Octane /S (*2)
042- GERBER Radius /S
043- GERBER Splice
044- GERBER Strata /S
045- GERBER Suspension /S
046- GERBER Suspension-NXT /S
047- GERBER Truss /S
048- GERBER Vise
049- HANWEI Professional Multi-tool by PAUL CHEN 1008-GT
050- HAVALON Evolve Jim Shockey Signature Series XTC-60AMTS /S
051- HENSTRONG (or Bibury or Intey or …) 18-in-1 /S
052- KERSHAW A100C /S
053- LEATHERMAN Blast (with Removal Bit Driver) /S
054- LEATHERMAN Charge+ (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
055- LEATHERMAN Charge+ Forest Camo (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
056- LEATHERMAN Charge+ TTI (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
057- LEATHERMAN Charge TI 2HO (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
058- LEATHERMAN Charge TTI (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
059- LEATHERMAN Charge XTI (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
060- LEATHERMAN Core /S
061- LEATHERMAN Crunch /S
062- LEATHERMAN Expanse E33BX /S
063- LEATHERMAN Expanse E55BX /S
064- LEATHERMAN Expanse K502X /S
065- LEATHERMAN Free P2 /S
066- LEATHERMAN Free P4 /S
067- LEATHERMAN Free T2
068- LEATHERMAN Free T4
069- LEATHERMAN Freestyle /S
070- LEATHERMAN Fuse /S
071- LEATHERMAN Juice CS4 /S
072- LEATHERMAN Juice S2 /S
073- LEATHERMAN Juice Pro (with Victorinox Mini Screwdriver) /S
074- LEATHERMAN Juice XE6 (with Victorinox Mini Screwdriver) /S
075- LEATHERMAN Leap /S
076- LEATHERMAN Micra
077- LEATHERMAN MUT (with Bit Kit & Tool adapter V2) /S
078- LEATHERMAN MUT EOD /S
079- LEATHERMAN OHT (with tweezers) /S (*2)
080- LEATHERMAN Raptor /S
081- LEATHERMAN Rebar /S
082- LEATHERMAN Rev /S
083- LEATHERMAN Signal /S (with Bit Kit & Bit Driver Extender)
084- LEATHERMAN Sidekick /S (with carabiner)
085- LEATHERMAN Skeletool CX (with Bit Kit & MUT Bits) /S
086- LEATHERMAN Skeletool RX (with Bit Kit & MUT Bits) /S
087- LEATHERMAN Squirt E4
088- LEATHERMAN Squirt ES4
089- LEATHERMAN Squirt P4
090- LEATHERMAN Squirt PS4
091- LEATHERMAN Squirt S4
092- LEATHERMAN Style
093- LEATHERMAN Style CS
094- LEATHERMAN Style PS
095- LEATHERMAN Super Tool /S
096- LEATHERMAN Super Tool 200 (with Tool Adapter V1) /Combo S
097- LEATHERMAN Super Tool 300 /S
098- LEATHERMAN Super Tool 300 EOD /S
099- LEATHERMAN Surge (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
100- LEATHERMAN Surge 2013 Black Edition (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
101- LEATHERMAN Wave (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
102- LEATHERMAN Wave+ (with Bit Kit & Pocket Clip & Lanyard Ring & Bit Driver Extender) /S
103- LEATHERMAN Wingman V1 /S
104- OPINEL N°9 Bricolage
105- PIRANHA 6-in-1 (crescent wrench & pliers combo) /S
106- PIRANHA 9-in-1 (crescent wrench & pliers combo) /S (*2)
107- RATNIK 6E6 (with diamond-coated file) /S
108- ROXON Knife Scissors S501
109- ROXON Multi BBQ Tool MBT Mini S602
110- ROXON Multi BBQ Tool MBT3 S601 /S
111- ROXON Sparkle CM1349 /S
112- ROXON Storm S801 (with bit kit & Victorinox Mini Screwdriver) /S
113- RUIKE Criterion M61-G (with Victorinox Mini Screwdriver) /Böker S
114- RUIKE Trekker LD43 Rescue Tool
115- RUIKE Trekker LD51-B (with Victorinox Mini Screwdriver) /Victorinox S
116- SCHRADE Tough Chip ST2 /S
117- SCHRADE Tough ST1 (original U.S./ version 1) /S
118- SCHRADE Tough ST1 (Taylor Brands Schrade) /S
119- SCHRADE Tough ST11 /S
120- SCHRADE Tough STE5 /S
121- SEBERTECH Sebertool M2
122- SEBERTECH Sebertool M4
123- SOG CrossCut 2.0
124- SOG Paratool S31 (with Saw instead Philipps screwdriver + Bit Driver + Hex Bit Accessory Kit) /S
125- SOG Pocket PowerPlier S44 /S
126- SOG PowerAccess Deluxe (with bit kit) /S
127- SOG PowerAssist S66 (with Saw instead of V-Cutter) /S
128- SOG PowerDuo PD01 /S
129- SOG PowerGrab (with Bit Kit) /S
130- SOG PowerLock S60 (with Bit Kit) /S
131- SOG PowerPint (with Bit Kit) /Böker S
132- SOG PowerPlay (with Bit Kit) /S
133- SOG Snippet
134- SOG SwitchPlier V2.0 /S
135- SOG Sync II
136- SWISS+TECH Micro-Max 19-in-1
137- SWISS+TECH Micro-Plus EX 9-in-1
138- SWIZA C08 Urban Camo/S
139- TOPEAK The Alien /S
140- UD Vape Cool Kit Multi-tool Cutting Pliers /S
141- UTICA KUTMASTER Multimaster 11-3565CP /S
142- VICTORINOX Bantam (ALOX Silver 0.2300.26)
143- VICTORINOX Cybertool L (1.7775.T) /S
144- VICTORINOX Evolution Grip 18 (2.4913.SC8B1) /S
145- VICTORINOX Expedition Lite (1.7965.AVT) /S
146- VICTORINOX Huntsman Lite (1.7915.T) /S
147- VICTORINOX Huntsman SilverTech (1.3713.T7) /S
148- VICTORINOX MiniChamp (0.6385) /S
149- VICTORINOX Nail Clip 580 (0.6463)
150- VICTORINOX Pioneer X (ALOX Silver 0.8231.26)
151- VICTORINOX Ranger Grip 71 Gardener (0.9713.C) /Wenger S
152- VICTORINOX Rescue Tool (0.8623.MWN) /S
153- VICTORINOX Signature Lite SilverTech (0.6226.T7) /S
154- VICTORINOX Swiss Army Knife 18 (0.8461.MWCH) /S
155- VICTORINOX Swisschamp (1.6795.T) /S
156- VICTORINOX SwissTool PLUS (3.0323.L) (with all accessories & scissors) /S
157- VICTORINOX SwissTool Spirit XBS (3.0224.3CCH) /S
158- VICTORINOX SwissTool Spirit XC PLUS RATCHET (3.0239.N) (with all accessories) /S
159- VICTORINOX Wine Master (walnut wood 0.9701.63) /S
160- VICTORINOX Workchamp (0.9064.3) /S (~ 0.8564 : lockable large flat screwdriver)
161- WALTHER Multi-Tac /S
162- WENGER EvoGrip S557 (1.557.059.821 with Victorinox Mini Screwdriver/ ~ Victorinox Evolution Grip S557) /S
163- WENGER Pocketgrip 577 /S
164- WENGER RangerGrip Handyman 1.077.0[90.822] /S (~ Victorinox Ranger Grip 74 or 174 Handyman or Boatsman for the pliers)
165- WENGER Swiss Business Tool SBT 60
166- WENGER Titanium 2 (1.092.042.000) /S
167- WENGER Titanium 3 Ueli Steck Spécial Edition (1.092.040.000) /S
168- WORPRO 16-in-1 Multi-tool /S
169- XIAOMI Nextool Huohou /S
Acquisition forecast - Call for donations… Leatherman, Sog, Gerber, Victorinox and the others (except Roxon) still stubbornly refuse to send me models that I could present. We live in a world unnecessarily absurd delivered to spirits that seem to be content with it...
1- BEAR & SON Bear Jaws Multiscissors BC157SM
2- BEAR & SON Electrician's Bear Jaws BC155EL
3- BEAR & SON Mini Bear Jaws 153
4- EMERSON Multitasker EDC 1/ 2
5- GERBER Centre-Drive Plus
6- GERBER Evolution MP650
7- GERBER Hinderer Rescue
8- GERBER Solstice
9- LEATHERMAN PST II
10- LEATHERMAN Free K4X
11- LEATHERMAN Pruner (Genus/ Visa/ Hybrid)
12- LEATHERMAN Pulse
13- MASERIN Citizen 564/G10N (by Moris Baroni)
14- MELITA-K Sapper/ Professional
15- SOG CrossGrip
16- SOG ToolClip
17- SPYDERCO Spyderench T01
18- VICTORINOX Cybertool Lite
19- VICTORINOX Swisschamp XLT
20- WENGER Ranger 14 Gardener
21- WENGER SwissGrip (WengerGrip 76)
the same but the leatherman bit extender
Do you live in a jungle?
Hello Diezelle... I have been watching your videos for quite some time. Just want to say that i am very thankful for your work and very informative vids... Regards
That smiley face at the end was awesome!!
Процедура склеивания магнита:
- расположите в колонке достаточно магнитов, чтобы эта колонка выходила за канал и могла быть снята
- на магнит, который будет приклеен, нанесите очень маленькую каплю клея, чтобы клей не переливался с поверхности его нанесения, когда он прижимается к нижней части воздуховода,
- ввести столбец точно, нажать на столбец и ждать,
- удалите колонку, которая оставит магнит приклеенным к нижней части воздуховода.
Magnet bonding procedure:
- arrange in column enough magnets so that this column exceeds the conduit and can be withdrawn,
- on the magnet that will be glued, put a very small drop of glue, the glue must not overflow from its application surface when it is pressed to the bottom of the duct,
- introduce the column precisely, press the column and wait,
- remove the column which will leave the magnet glued to the bottom of the duct.
Procédure du collage de l'aimant :
- disposer en colonne assez d'aimants pour que cette colonne dépasse du conduit et puisse être retirée,
- sur l'aimant qui sera collé, ne mettre qu'une très petite goutte de colle, la colle ne devant pas déborder de sa surface d'application quand il sera pressé au fond du conduit,
- introduire la colonne précisément, presser la colonne et attendre,
- retirer la colonne qui laissera l'aimant collé au fond du conduit.
Awesome! Thanks for the how-to!
Хороший способ! Это позволяет использовать любые 4мм биты, сохраняя родные биты на случай, когда других нет рядом...Я раньше клеил магнит на полиморф (он твердеет при t° менее 65°С):брал 1 гранулу, помещал в держатель бит, сверху магнит, прижимал деревянной палочкой и грел 10 секунд турбо зажигалкой. Один мой друг наносит точную дозировку супер клея с помощью медицинской иглы от шприца, надетой на носик тюбика. Спасибо за ваш способ!!
Well done. If you ever need to get it out without heat, just pour some acetone down the hole :)
Alternative decision is don't use glue and just set up some pad between the magnet and bit. For example you can stick on piece of duct tape on the magnet. In this case the force between the magnet and the bit holder will be stronger than between the magnet and the bit. The bit will be inserted and removed without problems and the magnet will stay on his place. And you always can remove the magnet and return the Cybertool in the initial state in this case. I did similar adaptation with my multitool Daicamping DL12 . You can see video here ruclips.net/user/shortseShgM5k0R_c?si=Lt3053YbvTRw2dO3
You're a genius 😊👍
Gute Idee! Gruss vom Brasilien!
Wow, that looks like a hack where you don't have to compromise. I have double-sided bits from Hoto, I'm curious to see if they hold. Thank you
The 4mm bits that I used in addition to the Victorinox double-headed bits are standard bits of 28mm length.
great video, i can save money buying generic bits, the magnet was a cool idea
Happy Nikolaus my friend 🎅🏻
Excellent, thank you for showing so clearly!! Will afterwards 4mm bits for in the Cybertool storage? I'm assuming they are held there by the retention ball but maybe a magnet would fit in that storage too..?
The goal is to take as many bits as possible. This is the reason why the standard 4mm ball-less bits are held in the driver by a small magnet knowing that they cannot fit in the slots of the Cybertool.
What country are you from
Diezelle! Всё приклеил! Всё получилось! Вам всего самого наилучшего!!!!
Excellent ! :)
ordered 4x1 magnets right away, love the cybertool lite. Did i spot a wicking tool for making vaping coils there?:P greetings from germany, fellow vaper and multitool enthusiast:)
Oui :)
Zelle, your vidoes on the Cybertool Lite convinced me to purchase one! Question, what size Earth magnet do I need to purchase, as so to allow non Victorinox ball detent bit use?
Respondeu ?
see video ...
Is it possible to magnetize the bit holder with a powerful magnet?
This idea is interesting but I don't know ...
Thanks for posting this! I would've put epoxy on the magnets they'll probably hold up much longer.
Sand the back of all bits you like and stick a magnet to each one
...
Cool! Do you think these magnets would work on Leatherman's bit extender too?
Yes, but it would be better to use magnets with a larger diameter, 6 mm, and thicker, 6 mm (2*3).
Problem :
- if you glue magnets to prevent the 1/4" bits from sinking, you will no longer be able to use the Leatherman bits.
That's why I opted for a removable, non-magnetic solution, using two small nuts glued together for a height of 6.4 mm, together that you can see in this video : LEATHERMAN SCHOOL : How to use 1/4" bits & sockets? [Leatherman & Diegel Methods] : ruclips.net/video/ag1LVS2dSk0/видео.html
@@diezelle57 thanks for the info!
40 years ago you coulda handed me as a child 2 or 3 leatherman multi tools and you probably would have thought me autistic god bless em and me..I would have stared at em in a corner all day long oblivious to all around me....
Тул вообще новый! Нагрел соплетой (газовой) и всё вытащил :)))))))) ОООГГГРРРООМНОЕЕЕЕ СПАСИБО ВАМ ЗА СОВЕТ!!!! Вот как бы теперь правильно сделать! у Вас то руки от куда надо растут! А я хотел высверливать......:))))) Спаибо ещё раз!!!!
I DONT KNOW WHAT THE HELL YOU SAID....BUT I AGREE
Hello again. Usefull vid again. Also can use it on other bit-holders. Btw..where is Madame Croft ?
Will the bit holder still close fully with the original bits inserted? From the dimensions it looks like this shouldn't be a problem.
No problem.
Hi, a very nice video again! 👍
☺👍
Perfeito a inclusão do imã !
Modification faite 😎👍...merci beaucoup pour l'astuce !! Je vais maintenant chercher s'il existe un adaptateur 4mm ----> 1/4 qui me permettrait également d'utiliser des embouts plus grands de type clés Allen par exemple (pas trouvé l'adaptateur pour l'instant...pas sûr que ça existe)
Si quelqu'un est intéressé j'ai trouvé un adaptateur 4mm--->6,35mm sur Aliexpress pour pouvoir adapter les embouts 6,35 même si je sais qu'il est également possible d'utiliser le tournevis plat/décapsuleur du victorinox pour ça. Voici le lien pour l'adaptateur
€ 3,44 | Nouveau petit adaptateur de mors à queue hexagonale 4mm à 6.35mm 1/4 "Scewdriver Bits support adaptateur-magnétique, 2 pièces/lot
a.aliexpress.com/_mq8S5hx
Hello! I was glad to see your video on the CyberTool adapter, cause I picked up one of those a couple of weeks ago (this time, BEFORE I saw your presentation)! But just after placing some glue on one of those magnets, it got sucked up and became attached to one of the fillings in my teeth! Then, when I picked up my Engineer Titanium Tweezers (PTN-03) to remove the magnet, both the magnet and the filling came loose and I accidentally swallowed them both! The worst part is that because of this, every time I walk through one of those metal detectors, it goes off! Anyway, I still think it is a very good idea! 😉
:)))
How did you remove the magnet column after you inserted it to glue on the lower magnet? You didn’t show it in the video, it was cut.
A small drop of glue on the first magnet; then simply remove the column.
great video! I love the cyber tool very handy info thank you! :D
It is surprising that why Victorinox uses an old method to keep/retain the bits snugly by providing ball in stead of magnetized bit holder. I have purchased a Cybertool L a few days ago and has thought of using a tiny 4 mm magnet by gluing it with cyanoacrylate resin before watching this video. Anyway, it's nice and validates my idea.
Thanks.
Maybe it is because it used to be said that any magnetic field could damage small electronic components.
@@thelred-ph3lq No, small electronic components usually are not damaged by a magnetic field. This may only be the case for spinning(!) harddiscs. But even there you need a very strong field to cause any damage. The design of the Cybertool is now about 25 years old (the first model came out around 1999/2000) and was never changed since then. Back in the late 1990ies, using small neodymium magnets in screwdrivers was not that common and even today there are bit drivers with mechanical retention systems. Also when you want to keep double sided bits in a driver, magnets may not be enough if the part which will touch the magnet is just the tip of a PH0 Philips head.
@@petramunster8635 Hey, thank you. It makes sense.
Will the original Victorinox drivers fit into the tool WITH the magnet still inside the tool????
Thank you.
Yes, it's show in video ...
Thank you for humoring yet another clueless American!
Sincerely. :)
Excellent ta place développeur chez victorinox ou bien un conseillé technique
where do i buy those screw drive tips?
Normal bits 4 mm : anywhere (precision screwdriver)
Victorinox bits 4 mm : Victorinox shops, eBay ...
I inserted a small magnet inside that I removed from a mechanical hard drive and glued it with methacrylate
Magnet vs Diezelle))))😂😂😂😂
Can you provide links for the magnets and bits? Thanks!
Precision bits 4 mm, you will find everywhere (web, DIY store, ...).
The magnets used: www.amazon.fr/gp/product/B008U9RVHS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Nice :)
Where did you buy the magnets from? That brand?
www.amazon.fr/Magnet-Expert-diam%C3%A8tre-n%C3%A9odyme-dadh%C3%A9rence/dp/B008U9RVHS/ref=sr_1_6?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=magnet+4mm&qid=1595452237&sr=8-6
@@diezelle57 I'm in the states, but thank you for the quick response.
у меня попало видимо много клея по бокам .не могу теперь достать половину магнитов изнутри .Что можно сделать? Хочу теперь высверливать :(((((((((((
Я хорошо описал операцию (см. Описание):
- не наносите много клея на магнит, особенно не по краям, нет необходимости переполнения давлением,
- вставьте магнит в столбик с магнитом, нажмите, подождите и снимите столбец.
I have described the operation well (see description):
- do not put a lot of glue on the magnet, especially not on the edges, it is not necessary that there is overflow with the pressure,
- insert the magnet with the magnet column, press, wait and remove the column.
J'ai pourtant bien décrit l'opération (voir en description) :
- ne pas mettre beaucoup de colle sur l'aimant, surtout pas sur les bords, il ne faut surtout pas qu'il y ait débordement à la pression,
- insérer l'aimant avec la colonne d'aimants, appuyer, attendre et retirer la colonne.
Попробуйте сильно нагреть, очистите воздуховод и вставьте столбик магнитов.
Is this tool discontinued? It appears to be unavailable... IMHO
CyberTool L is obviously not stopped.
Привет! А в пластиковом держателе биты держатся?
Bonne question ! :) Non, ils glissent dans leur logement car les embouts standards de 4 mm ne sont évidemment pas doté d'une bille. Mais cela n'est absolument pas gênant.
Если магниты вклеить, то держаться.
То что головки стоят дорого, это как правило складывается из цены прецизионной обработки твердой инструментальной стали. То что китайские стоят дешево, это значит что сталь там мягкая, не инструментальная.
link for buy these iman?? thx
Sur Amazon, il y a toutes les tailles, des plus gros au plus petits : www.amazon.fr/gp/product/B008U9RVHS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Mais aussi sur eBay, Wish, Aliexpress, Banggood, etc.
@@diezelle57 tthx u :D
А где можно купить такие маленькие магниты?
Sur Amazon, il y a toutes les tailles, des plus gros au plus petits : www.amazon.fr/gp/product/B008U9RVHS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Aliexpress
@@user-um8hq5br4y Ben oui, Aliexepress, Banggood, Gearbest, Wish, etc. :)
CANT see how this got any dislikes...informative..quiet...peaceful soothing jungle music..I'd hit like button 8 more times just to even it up if liberal youtube let me..GOOD JOB MAN
Merci :)))
Características 3:36
BE CAREFUL WITH MAGNET COLUMNS!
I also tried it with a column of identical disc magnets, 4x1 mm each - they just stuck in and do not came out again! Now my knife is ruined and I can't use the screw driver any longer😞No, I did not even use glue for my first try, just used the magnet column to test the procedure as it looks so simple in the video. Victorinox will not repair this under warranty, the knife is garbage now.
I will try to glue a long screw with a 3 mm flat head to the top of the magnet column which is stuck inside the driver. If that works, I may be able to take out one magnet after the other - but I wonder, how you managed to pull out the magnet column in one piece. Did you glue the magnets together first?
Ok, the first magnet is out - but the others still stuck inside. So I will glue the one magnet with the screw to the next one and so on... since the glue has to set first, before I can pull the magnet out, this will take a couple of days.
Success at last! It took only two magnets on the screw to get the remaining column out again.
I now glued one magnet to a 3 mm allen wrench so I could use that to position a second magnet inside the bit holder.
Tool: pasteboard.co/etBFjBqD5Wzw.png
Inserting the magnet to the bit holder: pasteboard.co/NPiRABUupAzo.png
petramunster8365 hey, thanks for your comments since he didn’t show how he removed the column.
So to install the magnet, you suggest to glue a magnet to the Allen wrench then use that glued wrench magnet to insert another magnet with glue on the bottom into the driver?
Thanks, I’m trying to figure this out without ruining this expensive knife.
@@stephanm3032Yes, that's exactly the way I did it. Just keep in mind that the glue needs time to harden.
Решил продолжить ваше дело. ruclips.net/video/NAzBNWvAq08/видео.html
lol
😂15 minutos de ver como se complica la vida un individuo" - Y echar a perder la *originalidad* de una navaja Vitorinox, por no gastar unos cuantos euros 😂
???