Really nicelely done! I have a DT 50 for years in my garage and at times I was really hungry but no matter how hungry, or low on money at times I got I never would sell the bike =D Now years later things are doing better... and maybe in a year I have the time and money to rebuilt it!
Ihan vitun hieno detsoni ja video oon nyt vrm viimesen viikon aikana kattonu tön videon joka pv vähintää kahesti ja sillo ku tää tuli ni kahtelin tätä kans. Hyvä video tee lisää!
What type of black paint did you use for the fairings? Thinking about respraying my DT and putting new stickers on because the old stuff is factory and is 12 years old now.
The bolt that goes trough the front rim. Did you hammer it in or did you screw it in? I can see some threads on the bolt but mine oes straight trough the fork.
Hello, I'm looking for some vinyl for my bike and the only ones that I liked are those that you have ridden. You could pass me the link to buy them?, I can not find them anywhere. Thank you
Hi, i have a friend that is selling a yamaha dt 50cc lc (BUT I DONT LIKE THE LOOKING OF THE LC ) i can put the dt 50 r plastics in the lc ? (with someone know pls tell me ) thank you. AND I LOVE YOUR BIKE, NICE JOB
I want to build a 50cc bike like this and put a 70cc or 100cc cilinder on it, but i was wondering if i can still ride long distances on it (sometimes a few hours) without problems or will the cylinder get too hot?
Kiitos! Ei oo häkkikoroa vaan 5 cm koropala iskarin alapäässä. Runko sun muut osat on hiekkapuhallettu ja maalattu sitten ruiskulla kestävällä semigloss mustalla.
My dream bike man, right now i have a peugeot with 70cc tpr, 21mm, and stage 6 replica exhaust it rides like a dream but really want one with gears just cant afford it ): Great video btw
Hey nice video, im thinking of buying an aprilia rs 50 which has the same engine as yours. Is this engine easy to rebuild, is it reliable as a 70cc? Thank you.
Hey man I just got my malossi short neck and stage6 r/t 26mm pwk carburetor for my dt50r 07 like your bike. But my air filter doesn’t fit it’s so small between the back fender and carburetor I don’t what to do. The air filter is a stage6 double racing how did you fit yours?
Sande thanks for the answer. i got it to work I ordered a justable intake that goes 360 so you can spin it around. Also had to get a malossi e13 for it to fit! :-)
I always lose money with these projects but it is ok because that is not the point. I love doing these projects so if I dont profit it is not that big of a deal.
Itte oon just 86 tpr laittamas rieju mrt:hen,voca 80/90 yläkautta tuleva,mvt premium kisasähköt ja tpr 44mm kampiakseli ja stage 6 28mm kaasari. Onks tietoo mikä tulppa ja missä lukemissa pää suutin liikkuu?
I don't know, I haven't checked. But I think that it can go something like 12-13k?? And you have to have an exhaust that can go that high so the powerband is higher. You can't do that with stock exhaust. And then cylinder makes a big difference too and cylinder mofidying. If you want to go even further you can buy new ignition, like MVT Digital Direct... Everything affects it.
And then you have to send a mail or is There a webshop en do you have link of iT en btw very Nice bike by far the cleanest and the best video keep going!
Are these like uk bikes because I've never seen one in the US but I feel like I need it. Street legal would be awesome. Can you make them street legal and registered?
HeK thank you. Here in the US we have the old 1970 and 1980 dt 125 250 and 360. But we also have moped and anything past a 50cc is registered as a motorcycle and have different laws and you have to get a m class license
Best dt on yt, looks soo clean and perfect...
Daniels Dinsbergs Thank you! :)
Second best atm because u ex dt is nicer
Niko Kuparinen Thank you! I will try to make this even nicer.
Watch stekarne yamaha dt project!
the stickers ruined it smh
Really nicelely done! I have a DT 50 for years in my garage and at times I was really hungry but no matter how hungry, or low on money at times I got I never would sell the bike =D Now years later things are doing better... and maybe in a year I have the time and money to rebuilt it!
Thank you. Wow, I really respect your dedication. I hope you will be able to rebuild it soon!
absolutly stunning bike, great job!
Thank you!
first time i see someone break a am6 gearbox.. Nice💨💪
Thanks! 😂
Unelma DT😋👌
Nice bike!
Thank you!
You are so talented m8
Oskar Machaj Thank you.
Awesome build 😍
Thank you!
Iha saatanan kaunis peli mut usd keulan oisin laittan tai jonku muun keula ku toi näyttää hiuka piänelt.
Kiitoksia, usd keula tulos.
Congrats, well done 😉👍
Thank you!
Ihan vitun hieno detsoni ja video oon nyt vrm viimesen viikon aikana kattonu tön videon joka pv vähintää kahesti ja sillo ku tää tuli ni kahtelin tätä kans. Hyvä video tee lisää!
in morocco we have the 1988 dt 50 125 360 but never managed to find a dt 2007 or higher and i don't know why
it looks silly with that rear suspention lifter. stock hight would look more clean. otherwise great build :)
I agree, I am a tall guy and I hated the stock height so I had to put a small spacer for comfort. Thank you!
@@SandeProd did you put the spacer at the bottom of the rear spring or on top? how many cm?
What type of black paint did you use for the fairings? Thinking about respraying my DT and putting new stickers on because the old stuff is factory and is 12 years old now.
You did a really good job ^^
Thank you.
Aika namu😍🔥
The bolt that goes trough the front rim. Did you hammer it in or did you screw it in?
I can see some threads on the bolt but mine oes straight trough the fork.
Brutal dt! 💪💪
Thanks!
I'm thinking of a 80cc airsal , 24mm pwk carb, stage6 hpc crankshaft and scr corse 70cc.
What do you think?
I think that's a good configuration for that 15hp. Go for it. 👍
For about how long did this awesome build take?
About 5 months.
Where do you bought your seat cover. Have searched for a seat cover but i cant find it
From mc-scatter, it is a Finnish store.
Magnifique projet 😈😈 j'adore vraiment
Merci!
You have a very good clip on Yamah restoration or may chanel.
is it anything i should think about before spray painting my engine black??
So badass build bro. Im planning to rebuild the engine of my 1998 DT50 . Do i repaint it first or assemble the engine before repainting it?
Nice Bike !!!
Thank you!
Where do you buy your'e parts and what spray do you use?
Would have been perfect if we could have heard her at the end, but still very good video, the bike looks sooo clean.
Thank you! You can hear her in my most recent videos.
Hello, I'm looking for some vinyl for my bike and the only ones that I liked are those that you have ridden. You could pass me the link to buy them?, I can not find them anywhere.
Thank you
Hi! I'm sorry but they are custom made so they cannot be bought from anywhere. The company that made these is Revline MX Graphics.
Millä maalasit rungon? Ruiskul ihan normimaalil?
Ammattilainen maalas ruiskul juu.
nice bike :) my brother used to own one of these it was fun as hell... and also that dt was the begining of my love for 2strokes arent they amazing?
Incredible bike!
Dope af!
Thank you!
Yamaha TD 70/ 50 chainbracket BIG Siz wow fastest fantastic race..I 👍 YAMAHA...
You replaced the transmission with a stock one , or is there something aftermarket ?
New stock one.
Hi, i have a friend that is selling a yamaha dt 50cc lc (BUT I DONT LIKE THE LOOKING OF THE LC ) i can put the dt 50 r plastics in the lc ? (with someone know pls tell me ) thank you. AND I LOVE YOUR BIKE, NICE JOB
With what paint did you paint the frame with?
Love it dude ;)
Thanks!
Where you got this seat cover?I want same to😅
I want to build a 50cc bike like this and put a 70cc or 100cc cilinder on it, but i was wondering if i can still ride long distances on it (sometimes a few hours) without problems or will the cylinder get too hot?
You can, but you have to have a good cooling. Condsider an aftermarket fan on your radiator.
Sande thank you!
The blue DT in the start where are the graphics from mate?
Were did you buy seat cover?
Onko tossa häkkikoroa ja millä maalailit osia mm. T-palat, takaiskari, runko ja takaswingi? Itelläki Dt proju edessä niin haluaisin tietää. Hieno on!
Kiitos! Ei oo häkkikoroa vaan 5 cm koropala iskarin alapäässä. Runko sun muut osat on hiekkapuhallettu ja maalattu sitten ruiskulla kestävällä semigloss mustalla.
Bike looks Sick man!!
Thank you!
Sande No problem whats the topspeed?
110km/h with 13-53 sprockets.
Sande awesome!
I want to hear her
I will make a video of it!
Sande thank you man ❤️
Roni Kolehmainen tarkotti pärrää...
@@PROD.R4VEN no älä vittu
@@Masai69 siis roni kolehmaine oli kommentoinu jostai muijast jotai nii vastasin sille ettei tarkottanu ihmistä mut se on poistanu oman kommentin
God job!
Thank you!
Fico mo chave fião"
My dream bike man, right now i have a peugeot with 70cc tpr, 21mm, and stage 6 replica exhaust it rides like a dream but really want one with gears just cant afford it ):
Great video btw
Nice. 👍 Thank you.
Why u dont sell it and then buy yamaha dt?
best yamaha🤘🤘 u rock
Thanks!
This is what means "high end"
Hey nice video, im thinking of buying an aprilia rs 50 which has the same engine as yours. Is this engine easy to rebuild, is it reliable as a 70cc? Thank you.
It is very easy to rebuild and even as a 70cc it can be very reliable.
I also have an rs 50, putting my malossi 77 big boar and del auto carb in this week:)
Hey man I just got my malossi short neck and stage6 r/t 26mm pwk carburetor for my dt50r 07 like your bike. But my air filter doesn’t fit it’s so small between the back fender and carburetor I don’t what to do. The air filter is a stage6 double racing how did you fit yours?
I just pushed it in there. It wasn't perfect but it worked. Later I made one myself from a Pipercross filter to fit perfectly.
Sande thanks for the answer. i got it to work I ordered a justable intake that goes 360 so you can spin it around. Also had to get a malossi e13 for it to fit! :-)
Yes, baby let's go.😁😁😁
where did you get the decals from?
Do you have any profit margins when selling your bikes or do you go all in and don't care if you might not go profit on your builds?
I always lose money with these projects but it is ok because that is not the point. I love doing these projects so if I dont profit it is not that big of a deal.
Alright i see, thanks for the fast answer :D
Where you get graphics for your old bike?
Tapesnake, but it doesn't exist anymore. Now it is called Revline MX Graphics and you can find it in Facebook.
where did u buy all the plastic fom?!?
Itte oon just 86 tpr laittamas rieju mrt:hen,voca 80/90 yläkautta tuleva,mvt premium kisasähköt ja tpr 44mm kampiakseli ja stage 6 28mm kaasari. Onks tietoo mikä tulppa ja missä lukemissa pää suutin liikkuu?
BR9ES/EG toimii mut ite tykkäsin BR10EG. Pääsuutinta 140 lähtisin kokeilee ja siitä sit pienempää tai suurempaa tarvittaes.
Where did you buy the seatcover?
Can you give link where you buy this graphic?
please tell me how the fk u changed the airfilter, or got the "airbox" out, cant get it out of the carburettor and out of the frame of my Dt,
I had to disassemble the rear end of the bike completely to get it out.
Where did you bud the new plastic?
How long did it take you to rebuild it?
sick
I've built one myself. Alot more powerfull tho ahah. How did you manage to break the tranmission? Mine's holding pretty nicely to 25 Horsepower...
The engine is very old and used and had always been 50cc so it didn't handle the 70cc...
Hmm sounds plausible ahah, altough for it to break that way it seems that the gearbox had been under stress like failed burnouts etc.
Yeah that is possible but I just rode it pretty carefully but still it broke.
the rear shock absorber is different or is the original one? if it is different what brand is it?
Im wondering too…
One of only a few tuning storys who are getting a like from me
Thank you. I appreciate that.
How wow what a project ! Just is that normal that the moto looks weird on the pictures it looks like the back wheel is very near of the motor no ?
It always looks weird in pictures.
Where did you buy the new plastics?
how many rpm can it go ? my dt50 is normally stuck on 8000 and sometimes 9000 how do you get the high rpm's ?
I don't know, I haven't checked. But I think that it can go something like 12-13k?? And you have to have an exhaust that can go that high so the powerband is higher. You can't do that with stock exhaust. And then cylinder makes a big difference too and cylinder mofidying. If you want to go even further you can buy new ignition, like MVT Digital Direct... Everything affects it.
Drill from middle of your cdi box with 15mm drill bit. I did it and worked really well. -Sande's managerteam
Nice
Hey, very beautyfull dt please can you send me the link of the graphic kit please ?
They are custom made.
how can airsal have so much hp to crack the transmission have never seen any like it for airsal
how much did the build cost you and the bike? is it worth it?
Well alot and no it wasn't worth it but it was fun!
I know this is an old video but where is the gasket that is going between the 2 engine blocks in the gasket kit?
In AM6 engines there is no specific gasket for it. You have to put gasket mass between them yourself.
Thanks for the help! Now i can stop looking for one haha
could u please send me a link to the plastic? im about to start a bouild too :D
where did you buy the seat cover?
@sande where do you Buy This red graphics set from ?
RevlineMX Graphics
And then you have to send a mail or is There a webshop en do you have link of iT en btw very Nice bike by far the cleanest and the best video keep going!
Can you pls make a video how to remove seat??
I don't get it.
Where did you buy the decal kit?
Where did you but the seat cover?
Are these like uk bikes because I've never seen one in the US but I feel like I need it. Street legal would be awesome. Can you make them street legal and registered?
I don't know about uk but in Finland, Sweden etc... we have alot of these. And yeah they are street legal.
Sande I need one geez street legal too😭
HeK thank you. Here in the US we have the old 1970 and 1980 dt 125 250 and 360. But we also have moped and anything past a 50cc is registered as a motorcycle and have different laws and you have to get a m class license
ye in germany they are called supermoto and are something between street bike and enduro and they are street legal
Raz or we have supermoto but I just like this cross between moped and dirt bike
oliko hyvä tuo stagen kytkin? jäykkä vai sopiva?
Stagen jouset oli sika löysät et luisti 70ccllä kans. Ostin mostin jouset nii alko pitää. Levyt kuitenkin laadukkaat.
Wow!
very nice dt
sold my dt 2 months ago, because the engine block broke
can you make a soundporn
Thank you, I can try. :D
ok ty nice
Sick af
Thanks.
where did you buy that seat cover?
Mc-Scatter. It is a Finnish shop for moped parts etc.
where did u buy your seat cover?
mc-scatter.com
nättiä jälkeä!
Kiitoksia!
miten kiilotit nuit osia esim tuon jarrupolkime ja oliks siin joku maalipinta aluks?
Kiillotuslaikalla ja vahalla vedin. Ja ei ollu.
good jobb
where can i buy the graphics? i dont understand finish because im from sweden :)
The graphics are unique but you can buy similar from RevlineMX Graphics. You can find them in Facebook.
@@SandeProd OK thanks dude. How much did it cost
Did your cdi/ecu restrict or didnt it? and did you switch it or drill the cdi/ecu to have it not unrestrict?
I bought am6 ducati ignition, it is unrestricted so it revs all the way.
Sande okay, what transmission did you buy mine is a little bad so might need to buy new.
@@anglofil5489 stock.
can you pls tell my the best carb on my yamaha dt 50r 2007 i have 70cc kit on it thanks Greeting from CZ
21-24mm
Nice 👀👊🏼
Thanks.
From where did you got the stickers
Revline MX Graphics
What fatbar do you recommend? Im planning on buying one but i don’t want it to crack.
Idk Timeless?
Twenty
How much money did you get from your previous yamaha?
~2k in euros
tekantti sai kivan tilauksen sulta :)
Mint😍
Mist noi tarrat😍
Revline MX Graphics