The first update crashed, but I didn't change the SD card. I pulled out the battery and inserted it again. The update was resumed. The update was completed.
Wanted to leave my own thanks - your solution worked perfectly! Two hours googling until I found your YT video. The key was A. a full battery B. using a different FORMATTED memory card and C. having only one memory card in the camera.
Thanks for sharing Jem. I ran into the same issue when updating to Firmware 2.0. 1st time this happened to me with Sony a7iv firmware updates and it "freaked me out"! Took the battery and memory card out of slot 1, re-downloaded the firmware to a different SD card and it fixed the problem. Thank goodness...no more bricked camera!
@@Panther- I wanted focus stacking in camera, but it was an edgy ride for me. My advice if you have to do it would be buy a brand new card and be super careful to eject it properly from the computer.
Hi from France ! You saved my day, was so depressed with the not turning on issue after fail update to 2.01, tried everything I could find online but your simple solution to put out the battery and restart with a fresh copy of the file on an other SD card worked in less than 5min... big big thanks ! Do you have a Ko-fi page or anything else where I can give you a tip, nothing fancy but I'd really like to give you a little support for the help you provided with this stressful issue ! Thx again !
I'm so glad you got it fixed. That feeling when it fails isn't fun. I hadn't heard of Ko-Fi before so I've just set up a profile on there ko-fi.com/jemlang Thank you for letting me know about it and appreciate your support. All the best with your camera!
My Sony A7IV bricked I did try what you say but it didn’t workout and got in touch with Sony service by phone in Canada last Saturday and we tried to save it with no success. Now they gave me a list of authorized repair and said they can’t do nothing . I send it to Gentec in Markham near Toronto on Monday and now waiting for the estimate. The one year warranty is finish since the 27 December 2021 and since I paid it with my Visa card I have another year on warranty. So now I am waiting until Monday to contact Visa for more details and waiting for the estimate as well . Ask me if I will do a update on my camera again ….🤨
@@jemlang Hello again , so finally it’s costing me $902.70 Canadian to replace the mother board . I have tried asking Sony to pay the material and would pay the rest but nothing to do …because it’s out of the warranty…and for the credit card nothing to do also because I have send the camera before asking them and also that it doesn’t cover any updates done on the camera . So make sure you are still on your warranty before performing any updates of your firmware. Ask me if I will make any updates again…👆🤬
Went smoothly for me. Just downloaded the file. Renamed it to BODYDATA.dat and transferred to an SD card. Wanted to check how other people have gone with it considering some people had issues with 2.0. Thanks for commenting and sharing your experience.
Almost exactly the same for me. After 45 minutes I downloaded the file again and put it on another card. Both were Sony branded. Removed the battery and reinserted. A short time later (while chatting with a Sony rep) it finished.
I'd like your recommendation. There is an a7iii on the marketplace and it's almost new, but it's bricked. The guy used it few times only and while updating it bricket, and he said that it only show black screen. The price is really good lol, and i'm wondering if it's fixable using this method
It is a bit risky. Updating the A7III is done through a computer rather than the SD card like the A7IV so this method in this video won’t work. If you’re able to do it there with the owner on a laptop then it might be worth it. Otherwise it might be a dead motherboard which is expensive to replace.
I used an older V30 card that I don’t use anymore and successfully went to 2.0 first try. Did some test photos and videos and everything seems to be working great
I bought a new a7iv this Monday and saw this v2.00 update. I have updated it as suggested on Sony website and it just update from 1.00 to 1.05 to 2.00 smoothly. Not sure what happened on your end 🤔
Glad it all went well for you. Have been seeing a few people have been having the same issue as what I had on RUclips and Facebook. Hope you're enjoying your new camera.
Hey , I am thinking of buying the A7IV and I'm wondering about your experience with overheating. It would be a great help if you can share your experience.
This is great. Had the same issue yesterday. Different question though .. how do you get the extra 25G for cloud services? Lol I created a profile - but only see 5G available. Thanks!
Thank you sooo much, I had exact same problem and I could fix it with your video. I was sooo worry, you are a hero. great great video. so far the only video explain this problem and has soloution.
had exact same problem, i just deleted the dat file, and re download and used same card. i set a 6min timer also, worked in the end. then i saw your video in the comments from, Jason morris
Same here I called Sony up and the guy said that’s how Sony updates there camera so even when u put the battery back in the update won’t reset. I had to take out the sd card wipe it download a new file then insert it in the camera and the camera updated. It’s so weird that the camera becomes inoperable and u can’t reset it either way.
Also Sony recommends format the sd card in camera not computer it’s weird but I freaked out as well I use my a74 for portraits and I have a shoot this weekend I thought I was screwed😅
@@netanelashlag Glad you were able to get it working. Went through the same thing. I do have an A7III as a backup but still prefer to use the A7IV. Hope the shoot went well for you.
After watching this vid and read some of the comments I’ve decided not to do the upgrade. The camera does everything I need and I don’t think the upgrade would make the camera much better. Have you guys noticed some improvements improvements with the latest update?
I’ve done one shoot with it since updating and haven’t noticed a difference with general use. Taking it out again for another shoot shortly. Will report back if notice anything. The Creators’ App does seem easier to use. I rarely used IEM. But did use Creators’ to transfer an image after my shoot to do a quick Lightroom edit and it did fail once when transferring a raw image. Tried again and it worked.
I have an important shoot this week so I will wait, I have heard many others complain about other problems after installing the firmware, like the ISO keeps resetting all the time and or other glitches apparently. Also Monitor + No longer works, I never bought it bc I always got connection problems with it, bummer, seems to be a great app but never worked for me. I would love to just use the tap to focus on the newer app while On a gimbal but will have to try that when I have a week with out a big job. Is the newer app glitchy and stubborn like the last Sony Image app was? My lagged and always lost connections just like Monitor+ Did.
There were rumors there was going to be focus stacking added with this firmware. Fingers crossed they add that in a future update. Played around with that during my review of the A7RV and it is a very cool feature.
You will need to update to 1.05 first. Then once you’ve done that you can do 2.0. Just make sure to delete the file you download for 1.05. The download screen will ask you if you’ve downloaded 1.05 or not.
Honestly dont get why so many people rush to get an update that really doesnt even bring about any usefull upgrades..I dont really feel like i am in desperate need of the upgrade so will not
Thank you, i got the same issue right now with my A7iv and firmware 2.0 ! After 30mn i put the power off and red light continue to flash !!!? Like you, i put my battery out, other sd card with firmware 2.0, power on and after 4mn, ouuuwwwwaaa he is recoming to life... just a big panic, and thank youuu sony for my scary today!!!
you just saved my wallet I AM IN DEBT TO YOU NOW AND NOW SUBSCRIBING. i almost got depressed cus it didnt work but followed your instructions and it worked. thank the lord
Hello! I just tried to update my Sony a7iv to the newest firmware. I did everything right. I checked that I had version 1.05 installed, that my battery was sufficiently charged, and that I had the right BODYDATA file in the right size on my otherwise empty SD card. After reading the warnings I clicked on execute and my camera went black. Nothing happened since then. No blinking lights no sound no nothing my camera is totally bricked even though I did everything strictly according to the manual on updating your firmware. I already tried the power cycle procedure and I tried inserting different batteries just to be sure. I do not know what to do next... I got this message on the display ”The update file version is incorrect. When I go to version it says that I have version 2.01 but I dont know if I can trust that? Please help me what to do. I don’t know if the suggestion in this video will solve the problem?
It’s sounds like it has worked. Even though it had that error message. If you try the process again does it say that it is already updated? Maybe try downloading the file again just in case the file corrupted
Thanks for quick reply. I have to try again and see what it says. When your camera bricked, what did it say when you powered you camera again, under version? What version did it say you had? Or was there any message showing?
When I turned it on and it finished it said update completed. The firmware version showed the correct version. Let me know how you go when you try again.
Hi ! Well, that's exactly what happened to me few hours ago... and of course, I don't have a second SD ... Hopefully, tomorrow, I am going to a photo store and crossing my fingers. Will update this message then. I really hope that will work !
@@jemlang Thanks ! That's exactly what I did and it worked ! ***** 1) had to find a way to formate the card 2) found a free software to do so because of the size of the card, window11 is not offering the option 3) once card formatted, put the downloaded file on the card Insert in the camera, put the battery back in, switch on.... and the installation went on and completed ! Yay ! ... Thanks again for your care and reply !
Hey , I am thinking of buying the A7IV and I'm wondering about your experience with overheating. It would be a great help if you can share your experience.
Hello , so what happened I am curious because here is my problem and I also commented the same on this video Thanks for answering me ! "My Sony A7IV bricked I did try what you say but it didn’t workout and got in touch with Sony service by phone in Canada last Saturday and we tried to save it with no success. Now they gave me a list of authorized repair and said they can’t do nothing . I send it to Gentec in Markham near Toronto on Monday and now waiting for the estimate. The one year warranty is finish since the 27 December 2021 and since I paid it with my Visa card I have another year on warranty. So now I am waiting until Monday to contact Visa for more details and waiting for the estimate as well . Ask me if I will do a update on my camera again ….🤨"
Wow. I just got stuck doing mine. Im absolutely fucking furious. It stuck on 5 slow blinks followed by 7 fast. I had to remove the sd card and battery and the camera just did not work.... but the LED was blinking differently. I put the SD into the computer (mac) and deleted the 'private' folder thats on there when you format the card in camera and also ran 'first aid' on it in disk utility. Put that in and it worked fairly quickly. I noticed the blinking getting quicker and different........ But it felt really horrible and I almost punched the wall which would have ended up with me in hospital. Really did not feel good gambling? on updating a £2000 body. In theory I think it might be better to do it tethered with a USB cable because SDs can easily get corrupted when you remove them from a computer. That was awful. Really awful.
Hey , I am thinking of buying the A7IV and I'm wondering about your experience with overheating. It would be a great help if you can share your experience.
Hello everyone…be very careful before performing any updates on the SONY A7IV the firmware! This update firmware from 1.10 to 2.0 broke my Sony A7IV , Sony service and support Canada tried with me by phone to bring it to life with no success and gave me a list of authorized repair dealers to have it repaired at my cost , it’s out of warranty since the 27 of December 2021 and now it’s costing me $902,70 Canadian to have it repaired, ( have to change the "Mother Board " ) Sony says they can’t do nothing for me . GOOD LUCK EVERYONE!🙏🤞🥴
Hey Serge, really sorry to hear of your bad experience with updating your camera. This is the 3rd time I've come across this type of thing happening. If it was me I would reach out to a local Sony rep and try escalating it through the chain up with Sony to try and get them to cover it. If you aren't able to find your Sony rep maybe reach out to the store you bought it from and ask them to put you in touch. And my advice, don't take NO for an answer. Keep us updated on how you go.
@@jemlang Thanks , I will try with the store I bought it from to see if they can get me in touch with the Sony rep. Will see but for now I have given the ok for the repair . I will let you know how it goes .
DO NOT INSTALL 3.02 ...IMMEDIATELY AFTER INSTALLING 3.02, THE A7IV COULD NO LONGER CONNECT TO MY MACBOOK. Sony said...we'll take care of it. Send it to Precision Camera. NOW, Precision Camera is trying to charge me over $600 ..."usb issue on main pcb...BULL-LONEY. The camera literally worked perfectly up until the day I installed 3.02. (Also: did it in camera with Creator's App. It was a mistake using Creator's App)...3.02 broke the camera's ability to access mass storage. BTW The camera is 16 months old. This "quality and customer service" I can do without.
Sorry this happened. Really frustrating. Have seen this happen to a handful of people unfortunately. Maybe contact the place you bought the camera from and see if you can speak to a Sony rep. Good luck
@@jemlang Thanks...I bought the iv from B&H...in April 2023. I was so irked that my essentially new camera had a firmware caused defect I went straight to Sony. Escalated to Subject Matter Expert Tier 3 Sr. Imaging Specialist Sony Alpha Pro Support...Talk about an aggravating waste of time. Sony used to be a reputable company ( I guess, I never had a problem with a Sony product before so maybe they always sucked?) They should be ashamed, but they are not. Sony's poor quality (either main pcb or firmware) is not their problem. It is their formerly loyal customer's problem..($600) My last Sony.
Have you had any issues updating the firmware on your Sony A7IV?
nope. But I have learned to Format the SD card prior to putting it on a SD card.
Same thing happened to me. Followed your instructions and worked great. Thanks for your help!
Yes. Mine was bricked and I managed to unbrick it with your suggestion and TimButt2's suggestion to remove the second card. Thanks!
MY camera bricked followed your instructions and you saved my camera thank you!🤯
I just update firmware 2.01 and when it start updating my camera brricked till now I can't find solution please help me
The first update crashed, but I didn't change the SD card. I pulled out the battery and inserted it again. The update was resumed. The update was completed.
That is very handy and good to know. Thanks for sharing
Same here
Exact same here as well
Forgot to mention that I did try this too but didn’t work. Glad it’s working for other people.
Worked for me as well
Wanted to leave my own thanks - your solution worked perfectly! Two hours googling until I found your YT video. The key was A. a full battery B. using a different FORMATTED memory card and C. having only one memory card in the camera.
Awesome. Glad was able to help out. Nothing like a firmware update failing to make your heart stop.
Thanks for sharing Jem. I ran into the same issue when updating to Firmware 2.0. 1st time this happened to me with Sony a7iv firmware updates and it "freaked me out"! Took the battery and memory card out of slot 1, re-downloaded the firmware to a different SD card and it fixed the problem. Thank goodness...no more bricked camera!
So relieving! Glad you it's all working again for you.
Yes same to me! It's crazy! Luckily saved it! Phew!
I have a tried and true philosophy on firmware. If the camera does everything I want; I never update. Ever.
Exactly this firmwire isnt really even worth it in my opinion to risk bricking my camera
@@Panther- I wanted focus stacking in camera, but it was an edgy ride for me. My advice if you have to do it would be buy a brand new card and be super careful to eject it properly from the computer.
great video Jem, thanks a million for this. My camera brick and this was the solution. :)!!!
Glad it helped!
I had same issue. Thank you so much bro 🙌
😃🙌🙏
thank you very much, your video saved me! 🙏
Glad I could help 😃
Hi from France ! You saved my day, was so depressed with the not turning on issue after fail update to 2.01, tried everything I could find online but your simple solution to put out the battery and restart with a fresh copy of the file on an other SD card worked in less than 5min... big big thanks ! Do you have a Ko-fi page or anything else where I can give you a tip, nothing fancy but I'd really like to give you a little support for the help you provided with this stressful issue ! Thx again !
I'm so glad you got it fixed. That feeling when it fails isn't fun.
I hadn't heard of Ko-Fi before so I've just set up a profile on there ko-fi.com/jemlang
Thank you for letting me know about it and appreciate your support. All the best with your camera!
Does this method work even if I have reset the camera? I panicked a bit and did that.
I ran into a problem, but it was a quick fix. Great vid explaining the firmware upgrade and the possible problems.
Thanks! Save me from the exact same issue. I just download the file to the same SD card and it works!
Glad was able to help @simonlin6376
thank and love you
My Sony A7IV bricked I did try what you say but it didn’t workout and got in touch with Sony service by phone in Canada last Saturday and we tried to save it with no success. Now they gave me a list of authorized repair and said they can’t do nothing . I send it to Gentec in Markham near Toronto on Monday and now waiting for the estimate. The one year warranty is finish since the 27 December 2021 and since I paid it with my Visa card I have another year on warranty. So now I am waiting until Monday to contact Visa for more details and waiting for the estimate as well .
Ask me if I will do a update on my camera again ….🤨
Far out. Sorry to hear what you’ve gone through. Hope you’re able to get a quick fix.
@@jemlang Hello again , so finally it’s costing me $902.70 Canadian to replace the mother board .
I have tried asking Sony to pay the material and would pay the rest but nothing to do …because it’s out of the warranty…and for the credit card nothing to do also because I have send the camera before asking them and also that it doesn’t cover any updates done on the camera .
So make sure you are still on your warranty before performing any updates of your firmware.
Ask me if I will make any updates again…👆🤬
Update 2.01 is up improves the ibis and overall handling of the camera.
How did you go installing it? Have any issues?
@@jemlang I used Mac. Had issues in the beginning but I attached a lens then the option appeared on camera. Give that a try.
Went smoothly for me. Just downloaded the file. Renamed it to BODYDATA.dat and transferred to an SD card.
Wanted to check how other people have gone with it considering some people had issues with 2.0. Thanks for commenting and sharing your experience.
Almost exactly the same for me. After 45 minutes I downloaded the file again and put it on another card. Both were Sony branded. Removed the battery and reinserted. A short time later (while chatting with a Sony rep) it finished.
I had that issue the last time, so i dont do updates anymore
I'd like your recommendation. There is an a7iii on the marketplace and it's almost new, but it's bricked. The guy used it few times only and while updating it bricket, and he said that it only show black screen.
The price is really good lol, and i'm wondering if it's fixable using this method
It is a bit risky. Updating the A7III is done through a computer rather than the SD card like the A7IV so this method in this video won’t work.
If you’re able to do it there with the owner on a laptop then it might be worth it. Otherwise it might be a dead motherboard which is expensive to replace.
@@jemlang thank you for the reply
Thank you thank you thank you 🙏 😊
I used an older V30 card that I don’t use anymore and successfully went to 2.0 first try. Did some test photos and videos and everything seems to be working great
Thanks!
I bought a new a7iv this Monday and saw this v2.00 update.
I have updated it as suggested on Sony website and it just update from 1.00 to 1.05 to 2.00 smoothly. Not sure what happened on your end 🤔
Glad it all went well for you. Have been seeing a few people have been having the same issue as what I had on RUclips and Facebook. Hope you're enjoying your new camera.
@Jem Lang yup I had a7sii and a7iii earlier. It should be superior but couldn't test it much. Will start taking bangers soon 😅
@@fnaticmedia Whooo bring on the bangers!!
Hey , I am thinking of buying the A7IV and I'm wondering about your experience with overheating. It would be a great help if you can share your experience.
This is great. Had the same issue yesterday. Different question though .. how do you get the extra 25G for cloud services? Lol I created a profile - but only see 5G available. Thanks!
I noticed this as well when I first setup my profile. After adding my cameras and lenses to my profile the capacity increased to 25gb.
Interesting. Even with more than one camera you still only get 25gb?
@@TrevorMcGrathPhotography Yeah would be nice to have a 25gb per camera.
Thank you sooo much, I had exact same problem and I could fix it with your video.
I was sooo worry, you are a hero. great great video. so far the only video explain this problem and has soloution.
Really glad I was able to help out. Thanks for your comment.
had exact same problem, i just deleted the dat file, and re download and used same card. i set a 6min timer also, worked in the end. then i saw your video in the comments from, Jason morris
Hey @tek_soup. Glad you were able to fix it. Thanks for watching and commenting 😊
Thanks for your video, it's help my to restore my camera back! 🙌
Happy to help!
Same here I called Sony up and the guy said that’s how Sony updates there camera so even when u put the battery back in the update won’t reset. I had to take out the sd card wipe it download a new file then insert it in the camera and the camera updated. It’s so weird that the camera becomes inoperable and u can’t reset it either way.
Also Sony recommends format the sd card in camera not computer it’s weird but I freaked out as well I use my a74 for portraits and I have a shoot this weekend I thought I was screwed😅
@@netanelashlag Glad you were able to get it working. Went through the same thing. I do have an A7III as a backup but still prefer to use the A7IV. Hope the shoot went well for you.
@@jemlang it did thank you yea I been thinking of getting another one maybe a7r5 in the future as my main and the a74 as a second
After watching this vid and read some of the comments I’ve decided not to do the upgrade. The camera does everything I need and I don’t think the upgrade would make the camera much better.
Have you guys noticed some improvements improvements with the latest update?
I’ve done one shoot with it since updating and haven’t noticed a difference with general use. Taking it out again for another shoot shortly. Will report back if notice anything.
The Creators’ App does seem easier to use. I rarely used IEM. But did use Creators’ to transfer an image after my shoot to do a quick Lightroom edit and it did fail once when transferring a raw image. Tried again and it worked.
I have an important shoot this week so I will wait, I have heard many others complain about other problems after installing the firmware, like the ISO keeps resetting all the time and or other glitches apparently. Also Monitor + No longer works, I never bought it bc I always got connection problems with it, bummer, seems to be a great app but never worked for me. I would love to just use the tap to focus on the newer app while On a gimbal but will have to try that when I have a week with out a big job. Is the newer app glitchy and stubborn like the last Sony Image app was? My lagged and always lost connections just like Monitor+ Did.
Does it Fix overheating issues on video mode? Tell please
We all beg for firmware updates and when they finally release one it’s A.Pretty crap and B.Kills your camera! Nice one Sony, you’re killing it!
There were rumors there was going to be focus stacking added with this firmware. Fingers crossed they add that in a future update. Played around with that during my review of the A7RV and it is a very cool feature.
me pasó lo mismo, acabo de probar de usar otra tarjeta y terminó la actualización. muchísimas gracias!!!!!!!!!!!!
¡Eso es genial! Me alegro que hayas podido arreglarlo y que mi video te haya ayudado. Gracias por comentar.
Hey, my a7m4 still on 1.00 firmware, can i just update to 2.00 ? Or i need to update with 1.50 first ?
You will need to update to 1.05 first. Then once you’ve done that you can do 2.0.
Just make sure to delete the file you download for 1.05.
The download screen will ask you if you’ve downloaded 1.05 or not.
@@jemlang thanks bro .. are the 1.05 firmware still on sony website ?
Sure are. If you head to the firmware 2.0 page it has that choice there to download the 1.05.
@@jemlang thanks dude .. appreciate it dude
Honestly dont get why so many people rush to get an update that really doesnt even bring about any usefull upgrades..I dont really feel like i am in desperate need of the upgrade so will not
Thank you, i got the same issue right now with my A7iv and firmware 2.0 ! After 30mn i put the power off and red light continue to flash !!!? Like you, i put my battery out, other sd card with firmware 2.0, power on and after 4mn, ouuuwwwwaaa he is recoming to life... just a big panic, and thank youuu sony for my scary today!!!
Glad to hear you got it working.
you just saved my wallet I AM IN DEBT TO YOU NOW AND NOW SUBSCRIBING. i almost got depressed cus it didnt work but followed your instructions and it worked. thank the lord
Mate, that’s awesome. So glad you got it working. Thanks for the comment and subscribing. Enjoy shooting! 🙌
Hello! I just tried to update my Sony a7iv to the newest firmware. I did everything right. I checked that I had version 1.05 installed, that my battery was sufficiently charged, and that I had the right BODYDATA file in the right size on my otherwise empty SD card. After reading the warnings I clicked on execute and my camera went black. Nothing happened since then. No blinking lights no sound no nothing my camera is totally bricked even though I did everything strictly according to the manual on updating your firmware. I already tried the power cycle procedure and I tried inserting different batteries just to be sure. I do not know what to do next... I got this message on the display ”The update file version is incorrect. When I go to version it says that I have version 2.01 but I dont know if I can trust that? Please help me what to do. I don’t know if the suggestion in this video will solve the problem?
It’s sounds like it has worked. Even though it had that error message. If you try the process again does it say that it is already updated?
Maybe try downloading the file again just in case the file corrupted
Thanks for quick reply. I have to try again and see what it says. When your camera bricked, what did it say when you powered you camera again, under version? What version did it say you had? Or was there any message showing?
When I turned it on and it finished it said update completed. The firmware version showed the correct version.
Let me know how you go when you try again.
Do you know if its possible to go back an update and start over from 1.05?
Yay! Thanks! It worked!
Great to hear it worked :)
Hi ! Well, that's exactly what happened to me few hours ago... and of course, I don't have a second SD ... Hopefully, tomorrow, I am going to a photo store and crossing my fingers. Will update this message then. I really hope that will work !
Maybe try formatting the card and downloading the firmware again from the Sony website. Good luck!
@@jemlang Thanks ! That's exactly what I did and it worked ! *****
1) had to find a way to formate the card 2) found a free software to do so because of the size of the card, window11 is not offering the option
3) once card formatted, put the downloaded file on the card
Insert in the camera, put the battery back in, switch on.... and the installation went on and completed !
Yay ! ... Thanks again for your care and reply !
Whoohoo! That's great news!! Glad it worked and your camera is working again. 🙌
❤❤❤ @@jemlang
ok but what about overheating?
At this moment is not able to my camera..., I don't know why? Maybe, because I'm located at PanamaCity, Rep. of Panama...?
Its not available in Panama City? You might be able to download it from the US Sony page or maybe another country.
Hey , I am thinking of buying the A7IV and I'm wondering about your experience with overheating. It would be a great help if you can share your experience.
And that is the reason you put off updates as long as you can.
That's terrifying!
Think my heart rate went to 200 when I turned it off and it was still flashing.
hi my camera wont turn on and still blinking .. what should i do :(
Have you tried taking the battery out?
Bricked?... well.. I needed to google translate that
great problem solving I would have been sweating bullets
Thanks Cody. Appreciate you watching and commenting. Been watching your content for years! 🙏
I’m one of the unlucky ones where the firmware never updated even after switching sd cards and now all my camera does in blink red
Oh no. Hope you're able to get it sorted. Have you tried downloading the firmware again?
I also called sony france and on the phone no one can solve the problem! just advise me to go back to my seller for the warranty
Hello , so what happened I am curious because here is my problem and I also commented the same on this video
Thanks for answering me !
"My Sony A7IV bricked I did try what you say but it didn’t workout and got in touch with Sony service by phone in Canada last Saturday and we tried to save it with no success. Now they gave me a list of authorized repair and said they can’t do nothing . I send it to Gentec in Markham near Toronto on Monday and now waiting for the estimate. The one year warranty is finish since the 27 December 2021 and since I paid it with my Visa card I have another year on warranty. So now I am waiting until Monday to contact Visa for more details and waiting for the estimate as well .
Ask me if I will do a update on my camera again ….🤨"
Exactly the same experience. On the second attempt, it correctly updated. BUT WAIT!! the next day the a7iv was again bricked.
No way!! Were you able to fix it?
Wow. I just got stuck doing mine. Im absolutely fucking furious. It stuck on 5 slow blinks followed by 7 fast. I had to remove the sd card and battery and the camera just did not work.... but the LED was blinking differently. I put the SD into the computer (mac) and deleted the 'private' folder thats on there when you format the card in camera and also ran 'first aid' on it in disk utility. Put that in and it worked fairly quickly. I noticed the blinking getting quicker and different........ But it felt really horrible and I almost punched the wall which would have ended up with me in hospital. Really did not feel good gambling? on updating a £2000 body. In theory I think it might be better to do it tethered with a USB cable because SDs can easily get corrupted when you remove them from a computer. That was awful. Really awful.
I just bought an a7iv a few weeks ago. I'm sure it needs an update but I'm afraid to do it with all these comments .
If you follow the steps in this video and on the Sony website you should be fine.
Hey , I am thinking of buying the A7IV and I'm wondering about your experience with overheating. It would be a great help if you can share your experience.
Upsales seem to update very frequent. But performance updates never seem to come out. 😂
Hello everyone…be very careful before performing any updates on the SONY A7IV the firmware!
This update firmware from 1.10 to 2.0 broke my Sony A7IV , Sony service and support Canada tried with me by phone to bring it to life with no success and gave me a list of authorized repair dealers to have it repaired at my cost , it’s out of warranty since the 27 of December 2021 and now it’s costing me $902,70 Canadian to have it repaired, ( have to change the "Mother Board " ) Sony says they can’t do nothing for me .
GOOD LUCK EVERYONE!🙏🤞🥴
Hey Serge, really sorry to hear of your bad experience with updating your camera. This is the 3rd time I've come across this type of thing happening.
If it was me I would reach out to a local Sony rep and try escalating it through the chain up with Sony to try and get them to cover it. If you aren't able to find your Sony rep maybe reach out to the store you bought it from and ask them to put you in touch. And my advice, don't take NO for an answer.
Keep us updated on how you go.
@@jemlang Thanks , I will try with the store I bought it from to see if they can get me in touch with the Sony rep.
Will see but for now I have given the ok for the repair .
I will let you know how it goes .
This update it's a big disappointed for me
Why’s that?
nooooooooooo - this is my biggest fear haha
I can use wedding videography
Absolute shit show of an update. Im currently on second try after the error 5/7 flashing. I KNEW I should have left it alone. 1.1 was working fine.
DO NOT INSTALL 3.02 ...IMMEDIATELY AFTER INSTALLING 3.02, THE A7IV COULD NO LONGER CONNECT TO MY MACBOOK. Sony said...we'll take care of it. Send it to Precision Camera. NOW, Precision Camera is trying to charge me over $600 ..."usb issue on main pcb...BULL-LONEY. The camera literally worked perfectly up until the day I installed 3.02. (Also: did it in camera with Creator's App. It was a mistake using Creator's App)...3.02 broke the camera's ability to access mass storage. BTW The camera is 16 months old. This "quality and customer service" I can do without.
Sorry this happened. Really frustrating. Have seen this happen to a handful of people unfortunately. Maybe contact the place you bought the camera from and see if you can speak to a Sony rep. Good luck
@@jemlang Thanks...I bought the iv from B&H...in April 2023. I was so irked that my essentially new camera had a firmware caused defect I went straight to Sony. Escalated to Subject Matter Expert Tier 3 Sr. Imaging Specialist Sony Alpha Pro Support...Talk about an aggravating waste of time. Sony used to be a reputable company ( I guess, I never had a problem with a Sony product before so maybe they always sucked?) They should be ashamed, but they are not. Sony's poor quality (either main pcb or firmware) is not their problem. It is their formerly loyal customer's problem..($600) My last Sony.
sony a7m4 2.00 --> 3.00 I HAVE A BRICK 😞
Nooooooo. Have you tried copying the file over again to a different SD card?
@@jemlang yes. Difrent sd, cf express, difrent battery
Maybe try downloading the file again from the Sony website in case it got corrupted.
@@jemlang yes. A brick)
Diosss mío SONY SOS pésimo me cambio a CaNOn ya mismo mi A7iv Falló es una mierd44444
Pretty sure devices of this class can’t be bricked, if the firmware update fails it just reverts back to old firmware.