thanks Jim, the web is overwhelmingly full of tantalising new tools, finally bit the bullet and spent some of my precious finances on my long awaiting wish list. now lots of ideas for new Vids … Cheers… Nick
thanks for supporting my channel Karry. I really appreciate that, especially after getting a bit carried away buying a few extra budget tools … I suppose I’ll have to get on with using them now and not just leave them sitting there looking pretty … cheers for that … Nick
Thank Denise, oh yes you certainly do know how I feel. I now need to get on and make something with them instead of leaving them looking pretty and admired … N
Wow! Christmas come early!! Surprising range; I've never seen tapering mandrels like these. I am intrigued to see how you get on with the tools. Especially the mitre clamp - that's the one on my wish list at the moment. Looking forward to the next videos, Nick
Hi Andrew, yes nice to have early Christmas toys to play with … The “Ring Bezel Mandrel Triblets” were a very cheap budget set to have a go with from cousinsuk. The mitre clamp was also an economy version but looks fine to me. I didn’t want to pay over £400 for Bergeon made version. Now just need a few video ideas using my nice new shiny tools … N
Don't you just Love an unboxing!!! I recognize some of those tools!! I'm so glad you were able to get them. I have a suggestion... before you do anything about the ingot mould, try to use it several times because it looks to me like a very thick protective coating of some sort. If you try burning it off and it's not plain old paint, then you might end up with just a rusty old piece of metal. I know you know way better than I do about your 'creative stuff', but sometimes I feel like I just need to try to help!! 😂 Thanks for sharing the unboxing with us, Nick!! I can't wait to see the new videos!!
thanks for that SandiRose, I try it first with molten copper and it did give off smoke and smelly fumes so I bit the bullet and burnt it all off and wire brushed back. now it’s a lot less textured in the grooves and works fine I will just need to keep it oiled to prevent rust. I’ve now got plenty of fresh ideas for videos with my nice new shiny toys … cheers … Nick
Im goin to get the same formung tools also the the crucibles and i didn't know about that jog i might get it too. You got a few other things i want to get as well. Happy for you.😊
Hi Rome, i’ve never had regrets spending money on tools. The cheap crucibles have been very good and I’ve really been enjoying the mitre jig. Good luck with your purchases. I hope you enjoy them as much as I have … N
I’m so jealous!!!! Where did you get your swag dapping blocks? I have so many different things that I can polish with.. but what is the name of the place that you ordered all of your new toys with? Again I’m very jealous. Big hugs 🤗, Michelle
Hi Michelle, being a hobbyist expensive top end tools aren’t always a priority for me so sometimes I go for budget tools rather than nothing. This dapping set I bought is probably the cheapest on the market and found it at cousinsuk.com … I did get a bit carried away on there website with my shopping cart and bought a lot of other cheap tools that I’ve always wanted … oh well I’ve never regretted buying tools … N
OK now you gotta tell me where you got all four of your different shaped mandrel??? I buy from Rio Grande, Otto Frei, Amazon… I still need to get my Amazon affiliate set up. Are you on Instagram? Big hugs 🤗 again, Michelle Ohhh FYI I am not receiving your videos in my notification!!! And I have the bell notification turned on. So I don’t know what’s going on with RUclips!!! I’m still not getting notifications for two other metalsmith that I follow
thanks for the hugs Michelle, this whole order came from cousinsUK not sure if they deal with overseas orders. They call these mandrels “ Ring Bezel Mandrel Triblets”. RUclips is the only social media I do and is enough to struggle with the complexities of how it all works … hope you get your notifications sorted … Nick
Can't beat new tools! I'm all for it. Look forward to seeing more videos showing how you are using them. Cheers. Jim
thanks Jim, the web is overwhelmingly full of tantalising new tools, finally bit the bullet and spent some of my precious finances on my long awaiting wish list. now lots of ideas for new Vids … Cheers… Nick
Mazel Tov on your new acquisitions. How exciting!
Thanks Tanya, maybe only fellow hobbyists understand the excitement of new Tools … N
Thanks for sharing. Looks like Christmas came early, what a fab haul 🤩
thanks for supporting my channel Karry. I really appreciate that, especially after getting a bit carried away buying a few extra budget tools … I suppose I’ll have to get on with using them now and not just leave them sitting there looking pretty … cheers for that … Nick
Oh there's nothing like new tools 🔧
cheers guideline, oh yes there’s nothing like a new tools to play with getting you going to make something different … N
Christmas! So exciting!
could do with an excuse like Christmas every month if I could afford it … N
@@Nickscreativestuff 😂 I know, and tools are expensive. Congratulations 🎉, and have fun!
fun and frolics for me with shiny new toys … cheers … Nick
@@Nickscreativestuff 💯
new toys, now your creativity will reach new highs!
now need to get on and have a play with them, instead of left looking pretty … N
New tools !! Love you videos. Cheers fro Oz
Nice one Peter, all the way round in Oz … N
Now i am jealous... these are beautiful new tools... wauw...❤
nothing quite like new tools to get ones creative juices flowing … N
what'up, Nicks. Yo!you uploadded unusual footage,🤚
Hi Prohodaction, I couldn’t resist filming such an exciting moment … N
omg, look at you!! you must be feeling like a kid at Christmas! a very nice selection there. im looking forward to seeing the next videos 👍👍
Thank Denise, oh yes you certainly do know how I feel. I now need to get on and make something with them instead of leaving them looking pretty and admired … N
Nice tools
Glad you like them … N
I have the same ingot mould. It's pretty rough. Had to burn off the paint and clean it up. Pretty rough thanks for sharing. 👍
Thanks Ron, just the same as what I did in the end. Works fine for my needs and it falls into the opinion of “A cheap tool is better than no tool” … N
Cool stuff. Christmas all over again.
Cheers Lee, nothing quite like choosing your own Christmas presents … N
Wow! Christmas come early!! Surprising range; I've never seen tapering mandrels like these. I am intrigued to see how you get on with the tools. Especially the mitre clamp - that's the one on my wish list at the moment. Looking forward to the next videos, Nick
Hi Andrew, yes nice to have early Christmas toys to play with … The “Ring Bezel Mandrel Triblets” were a very cheap budget set to have a go with from cousinsuk. The mitre clamp was also an economy version but looks fine to me. I didn’t want to pay over £400 for Bergeon made version. Now just need a few video ideas using my nice new shiny tools … N
Nice! I have to admit, I'm a bit envious lol
Godspeed and Blessings for you and yours.
Thanks for that Mr perfect, know how you feel. There’s so many jewellery making tools I would love to have … N
Woooow 🤩🤩🤩🤩
whoopee … 👁️❤️🛠️ … N
Don't you just Love an unboxing!!! I recognize some of those tools!! I'm so glad you were able to get them. I have a suggestion... before you do anything about the ingot mould, try to use it several times because it looks to me like a very thick protective coating of some sort. If you try burning it off and it's not plain old paint, then you might end up with just a rusty old piece of metal. I know you know way better than I do about your 'creative stuff', but sometimes I feel like I just need to try to help!! 😂 Thanks for sharing the unboxing with us, Nick!! I can't wait to see the new videos!!
thanks for that SandiRose, I try it first with molten copper and it did give off smoke and smelly fumes so I bit the bullet and burnt it all off and wire brushed back. now it’s a lot less textured in the grooves and works fine I will just need to keep it oiled to prevent rust. I’ve now got plenty of fresh ideas for videos with my nice new shiny toys … cheers … Nick
@@Nickscreativestuff Thank you for explaining all of that!!! I didn't think about keeping it oiled. I love learning from you!! Thank you, Nick!!
Nice one Sandi, i’ve had to get into the habit of oiling tools here in the damp UK … N
Im goin to get the same formung tools also the the crucibles and i didn't know about that jog i might get it too. You got a few other things i want to get as well. Happy for you.😊
Hi Rome, i’ve never had regrets spending money on tools. The cheap crucibles have been very good and I’ve really been enjoying the mitre jig. Good luck with your purchases. I hope you enjoy them as much as I have … N
nowe zabawki :)
oh yes shiny new toys to play with … N
❤❤❤❤
👍😎👍 … N
Where did you buy this product?
Hi Amankhaan, I got these tools from cousinsUK.com … N
Nice!!!!! New subscriber. I'm jealous of your new tools.😂
Hi Juanita thanks for your sub. Know how you feel, there’s nothing quite as exciting as unpacking a box full of new tools … N
How much money?? Aprox please. Congratulations for your Job!!
Hi Tamara, being a hobbyist I tend to go for budget tools sometimes The dapping set was £105 Plus VAT … N
I’m so jealous!!!! Where did you get your swag dapping blocks? I have so many different things that I can polish with.. but what is the name of the place that you ordered all of your new toys with? Again I’m very jealous. Big hugs 🤗, Michelle
Hi Michelle, being a hobbyist expensive top end tools aren’t always a priority for me so sometimes I go for budget tools rather than nothing.
This dapping set I bought is probably the cheapest on the market and found it at cousinsuk.com … I did get a bit carried away on there website with my shopping cart and bought a lot of other cheap tools that I’ve always wanted … oh well I’ve never regretted buying tools … N
OK now you gotta tell me where you got all four of your different shaped mandrel??? I buy from Rio Grande, Otto Frei, Amazon… I still need to get my Amazon affiliate set up. Are you on Instagram? Big hugs 🤗 again, Michelle
Ohhh FYI I am not receiving your videos in my notification!!! And I have the bell notification turned on. So I don’t know what’s going on with RUclips!!! I’m still not getting notifications for two other metalsmith that I follow
thanks for the hugs Michelle, this whole order came from cousinsUK not sure if they deal with overseas orders. They call these mandrels “ Ring Bezel Mandrel Triblets”. RUclips is the only social media I do and is enough to struggle with the complexities of how it all works … hope you get your notifications sorted … Nick
That wasn't cheap
even budget tools add up when you buy enough … N