Nice. I can use this with my homemade waterpump for my homemade pressure washer to clean my motorcycle with laser line using my old angle grinder with broken armature that i repaired. Thank you so much. I hope you will make a video how to make a laser line to.
Kya isko uv light detect krne k liye bana sakte hai.. IR LED ki jarurat nahi hai.. sirf reading LED rakhna hai.. aur usko R.O water system k UV lamp on /off detect krna hai.. becoz ye lamp kabhi bhi fuse ho jata hai aur bahar se pata nahi chalta.. plz suggestion de...
@@Bocha666 .. How would a photoresistor work to remotely determine proximity and distance? So far, I haven't found a solution. A laser ruler for building construction is the closest I've seen (distance & direction), but linking that to a computer is beyond me. Wired, not Bluetooth, is critical.
I made exactly same circuit(changed the IR LED polarity of course), but still I am getting the range about 10cm only, not sure what is missing, could you advise?
I know hardly anything but, I think he means like a photocell. Think of lights on and off with sundown and sunup. Or like the high line cars have had for years, dims the headlights when approaching on coming traffic or well lit areas. That’s what I think it means anyway.
i have completed the circuit. after connecting 3.7v of battery led glows. Also calibrated the 10k pot but IR sensors not responding. How to check with the alternatives. please suggest
I need one that tells me the proximity like a car sensor does, in meters. I need it to work from 4 mts to 0 . It is to use in an agriculture aircraft, to make our life easier. Could you make something like that and let me try it?
Very useful! How much is the power consumption in idle mode (standby)? And since I'm going to use a 3.7 Li-Po battery, what change should I make to resistors?
Tried this and the LED is always Lit, even if I remove the IR transmitter, the LED is still lit. Please help, I cant figure out what seems to be the problem. Thank you.
Change the IR receiver polarity it's working while in diagram the polarity is not true of the receiver. So.... Change IR receiver polarity it's 100% work..👍👍
Nice piece of work.I'm going to try and make one. Thanks mate
Nice. I can use this with my homemade waterpump for my homemade pressure washer to clean my motorcycle with laser line using my old angle grinder with broken armature that i repaired.
Thank you so much.
I hope you will make a video how to make a laser line to.
The work of the master is afraid. Well done well done.
I definitely need to make one of those! Awesome motion sensor, great job 👍👍
若有一組輸出端的話,會更完美!
This video is very creative.
Thnx very much bro.
This would work nicely with CD4026 IC’s and common cathode 7 segment led displays to count people, cars, etc.
Kya isko uv light detect krne k liye bana sakte hai.. IR LED ki jarurat nahi hai.. sirf reading LED rakhna hai.. aur usko R.O water system k UV lamp on /off detect krna hai.. becoz ye lamp kabhi bhi fuse ho jata hai aur bahar se pata nahi chalta.. plz suggestion de...
Very nice product
Nice simple circuit! I am confused, IR receiver and IR LED are same LEDs, and LED is photo LED? Please clarify. Thank you.
So nice
How do you define long-range? I need something that can detect objects 150 to 250 feet away.
with a Laser and a fotoresistor you can
@@Bocha666 .. How would a photoresistor work to remotely determine proximity and distance? So far, I haven't found a solution. A laser ruler for building construction is the closest I've seen (distance & direction), but linking that to a computer is beyond me. Wired, not Bluetooth, is critical.
Good Sir. How to use it for outdoor. It is not working properly due to Sunlight. Please reply sir.
Excelente información.
Muchas Gracias.!
Will this work in broad daylight, where there is so much of UV light and other distractions ?
I assume so, it uses IR light, meaning infrared, which should not be bothered by UV light
Can't I add or substitute a 5vdc relay for the LED to control things?
I made exactly same circuit(changed the IR LED polarity of course), but still I am getting the range about 10cm only, not sure what is missing, could you advise?
Using an ultrasonic sensor. Can you install a garage parking alarm sensor circuit?
Excellent 👏👍👌😍
What is a photo LED? I'm an electronics nerd but haven't heard of such a thing before. Thanks!
I know hardly anything but, I think he means like a photocell. Think of lights on and off with sundown and sunup. Or like the high line cars have had for years, dims the headlights when approaching on coming traffic or well lit areas. That’s what I think it means anyway.
You should link of equipment for buy .give in description.
Did you measure the maximum frequency?
Both LED (Photo and IR) does it has to be close to each other?
Will it works under sunlight
How long it can work?
الله ينور
Boa noite, não precisa do pino do sinal??
i have completed the circuit. after connecting 3.7v of battery led glows. Also calibrated the 10k pot but IR sensors not responding. How to check with the alternatives.
please suggest
Check the polarities of used ir leds
Nice!
What is the maximum response distance of the device?
Around 40cm with small object.
@@TechIdeasAG
Small objects is a penny, match box, palm?
ап
Palm
@@TechIdeasAG
Thank you!
Wow..... nice project
I need one that tells me the proximity like a car sensor does, in meters. I need it to work from 4 mts to 0 . It is to use in an agriculture aircraft, to make our life easier. Could you make something like that and let me try it?
How can you make something like this that can detect an object kilometers away
Whats the music your using, love it!
Nice ideas TKQ
What's is the min power to supply instead of 5v? Tq
You have taken 1 10k resistor but have used 2 in the diagram. Plz explain
Very useful!
How much is the power consumption in idle mode (standby)? And since I'm going to use a 3.7 Li-Po battery, what change should I make to resistors?
Can u make proximity with 12VDC? Please.. Thx
What of the polarities of those it LEDs
Dear..
How much total range that sensor can cover...
Why don't you use op amp 07 instead of 358 ?
Sir, how can I use 12v relay instead of that LED to turn on motor?
What additional circuit is required?
I am your new subscriber...😊
Great, I'm looking for detected between 0.1 and 0.15 mm
Is there a solution
Can I use 4558D?
The circuit diagram does not show each pin 1 to 8 were it must connect to.
Custom multipurpose screwdrivers rock.
Is there a way to keep that size but 10 ft range?
Nope
Thanks for sharing
harika proje peki buna 5v yada 12v röle nasıl bağlarız şema çizer misiniz Allah rızası için
How long it can measure
is it possible to increase the sensitivity up to 1 meter?
please tell me
How can I use it for distance hoto 5 feet.
Can you make pH meter ?please i will make school project.
Can you build this on a breadboard, I can't get the sensor to work???
Did it work?
maximum cm or meter ?
I need a circuit design with range of at least 1 meter. Can you share the circuit diagram? thanks.
I think this will work ruclips.net/video/zxJsqndWFPk/видео.html
I am looking for a circuit which can detect flow of air or water in a vacuum pipes.
I think The positive of IR RX must be connected to gnd
U r right bro
Circuit diagram is wrong....
Sound narration would immensely improve your presentations.
Want to increase range... Can you help
Tried this and the LED is always Lit, even if I remove the IR transmitter, the LED is still lit. Please help, I cant figure out what seems to be the problem. Thank you.
Change the IR receiver polarity it's working while in diagram the polarity is not true of the receiver.
So.... Change IR receiver polarity it's 100% work..👍👍
How much range?
Good
and the signal output?
Bhai I'm getting only 10 cm.. How to get up to 30 cm.. Could you plz help
How will I set buzzer in this
Sir i have a question kindly reply me
What is the maximum range?
Hoparlörden buzzer sesi devresi varmı.
Yeh kha par mil sakta h
30 to 40 feet long range ka kaise banay. Pls baataen
Total expense kitne ka aega
What can I do to increase the range above the 1 meter
1. Fine tune the pot
2. Use bigger obstacle (like light colored wall)
3. Use mirror as obstacle
How to increase sensing distance to 1 meter?
hello how to increase a distance more than 1meter ?
What I do increase range above 3 meter
Try adding a laser in the circuit
Do you have the layout sir
merci
👍👍👍👍
Photodiode is foreword biased in diagram . This is not correct.
Bro can I contact with you
How do I understand this schematic as i am in class 9th .
how is this considered 'long range'? in my opinion this is 'very short range'
1k resistor getting heat & ckt doesn't work
This won't work until you change the polarity of ir receiver
correcy
Atleast mention component s name and no in video
Hi bro :
Pls can u make avideo about motor speed controller Ac volt
Yes, will be uploaded
ជួយផ្ដល់ជាចំណេះដឹង
Diagram to sahi kar lo mere bhaiya
Add a beep
bruh you need a new screwdriver
long range = 20cm ??? alright...
а какова максимальная дистанция срабатывания?
Ти што ето же англоязичний канал тебя здесь не поймут
@@vhbhqa3207
а вдруг поймут?
А какая нужна?
@@Perepodvyvert_s_perevorotom
максимальная
@@МеняЗовутМитяйРаспздяйВторой
Автор ответил: 40см. до небольших объектов.
Что такое "небольшой объект" пока неизвестно.
Chubbe
How can I use it with 24vdc