One thing I see with these small rigs is you're centering the camera in the holder...not the lens. If you center the lens (offset the camera) it would be more intuitive when filming. Also integrate a moveable lens shade over the camera, on the brace.
July 2022: I went to Lowe's this morning and purchased all of the PVC fittings, tubing, and the machine bolt. I've just put it together, just as the instructions said in the video. Super easy. Took me maybe 30 minutes from starting the cutting of the PVC to finishing the glue-up. Total cost of material was $10.44. You can't beat that anywhere!! I'm waiting twenty four hours, and then I'll give it a flat black coat of spray paint. Super helpful project video HI PSI
06:40 - Basic principle: Never screw perpendicular to your hand or body. When the screwdriver slips out of the slot, it pierces your hand or body like butter.
I did something similar but I mounted a ring light on it using the power from one of those portable phone chargers. But what you did here was incredible.
Very well explained, the way you mentioned about all parts made me your FAN.... Make more videos... Like mobile stand etc and other diy things, tools...
Very Nice! Totally gonna do this. Except I think I'm gonna leave the bottom end caps unglued on the right and left handles so that they can be removed and it can be fitted onto a floor-standing tripod; also made from PVC, of course. Side note: I noticed the date this video was published was today's date and was like "Wow, almost a quarter-million views in less than 24 hrs!!!" But then I realized it said 2017 instead of 2019. Derp! Lol.
Very creative my friend I love it just what I need because I like to do a lot of phone footage with my drone footageWhere did you get the iPhone holder thanks for sharing bro
Richard Palmisano Thanks. The phone holder came with a luxebell selfie stick tripod combo. I'll go ahead and put a link in the description where you can get just the holder.
One thing I see with these small rigs is you're centering the camera in the holder...not the lens. If you center the lens (offset the camera) it would be more intuitive when filming. Also integrate a moveable lens shade over the camera, on the brace.
July 2022: I went to Lowe's this morning and purchased all of the PVC fittings, tubing, and the machine bolt. I've just put it together, just as the instructions said in the video. Super easy. Took me maybe 30 minutes from starting the cutting of the PVC to finishing the glue-up. Total cost of material was $10.44. You can't beat that anywhere!! I'm waiting twenty four hours, and then I'll give it a flat black coat of spray paint. Super helpful project video HI PSI
Did just see a rig for 35$ and started to think do i have parts home to start building. Great video 👍
06:40 - Basic principle: Never screw perpendicular to your hand or body.
When the screwdriver slips out of the slot, it pierces your hand or body like butter.
You can attach a bluetooth remote on one of he handles to make it easier. The thumb may not be able to reach the phone depending on the user.
but, why not do a shoot demonstration use?
Would have been nice to see examples of video footage with and without the rig. But I like what I see.
Why no demo footage?
Nice DIY project. Now if we could add some stabilization to it....
Lights, mic, the options are endless.
Good luck with the channel, we can do this!
What about stabilization?
Well done video. Simple. well explained. Thanks for labeling everything.
I am French I do not understand English could you give me the exact measurement of the long tube c urgent really Thank you mr
Can we shoot video without shake...??
If its 24’ im still missing the last 4 1/2” so its more then 24’
neat but i kinda want to see a test run before i try make it
I did something similar but I mounted a ring light on it using the power from one of those portable phone chargers. But what you did here was incredible.
Thanks for the comment and very cool idea you had with the ring light.
Very well explained, the way you mentioned about all parts made me your FAN.... Make more videos... Like mobile stand etc and other diy things, tools...
Thanks for sharing all the process.
Sharing the ideas
good vibes
Abür
México
Pumas
Campeón !!!
Do you have some videos with it !! if you have share it with us😊 just to see if it stabilise the video
Superb my friend
Where can i find video samples?
Nice! Can you make one for a DSLR camera?
Should be the same, just look up the one with the spring loaded screw as to not move your camera when attaching the camera to the mounting screw
good job 👍👍👍👍
Very Nice! Totally gonna do this. Except I think I'm gonna leave the bottom end caps unglued on the right and left handles so that they can be removed and it can be fitted onto a floor-standing tripod; also made from PVC, of course.
Side note: I noticed the date this video was published was today's date and was like "Wow, almost a quarter-million views in less than 24 hrs!!!" But then I realized it said 2017 instead of 2019. Derp! Lol.
Why not pvc glue..
김민엽 pvc glue dries too fast
Can we attach cameras also or only cell phone???
#VeryGood video. Brother
Sure, I don't see why not. GoPro or any other camera with mount screw.
@@HI-PSI I am French I do not understand English could you give me the exact measurement of the long tube c urgent really Thank you
Lit
Podrían ayudarme cuando miden en centímetros y no en pulgadas ?
Good but you could do it in 5 minutes.
I like your creativity. That's why I subscribed.
What is the brand of the phone?
Hakan SÖNMEZ LG G6
Affan Ahmad thanks
No gimbal
in cm please
just asking your permision can i make that and put it on youtube aswel?
You don't need my permission Bud. Go for it!
That cain of the spirit should be reign in the all world the spirit of giving and sharing no sistem just sharing and love
If director of Naploeon Dynamite made tutorial videos.
Great thanks for info
Very creative my friend I love it just what I need because I like to do a lot of phone footage with my drone footageWhere did you get the iPhone holder thanks for sharing bro
Richard Palmisano Thanks. The phone holder came with a luxebell selfie stick tripod combo. I'll go ahead and put a link in the description where you can get just the holder.
ZNoble thanks bro
Richard Palmisano right on
So creative!
Like it.
Well done
good explain but this is not a stabilizer
Thank you! I can literally go to Home Depot and get this stuff
I am French I do not understand English could you give me the exact measurement of the long tube c urgent really Thank you mr
Amazing Z NOBLE
Does it stabilize videos?
No
Karl Salazar probably will will end up throughing it in trash
Why do stopmotion this video
fab video... very creative... ill do this tomorrow and can use on all my channels
Gareth Rogers Right on, thanks.
Voy a intentar de hacerlo aver si me sale brow
this man just helped a whole lotta us
Check out my latest PVC/Smartphone build, uploaded yesterday!
Tanks Man this one is so perfect i take your Idea!
dụng cụ này hữu dụng cho RUclipsr
You are so smart. I am totally going to do this
Very good
7:46 :0 That was close
Excellent tutorial, sir.
Thanks, let me know how yours works out for ya!
I am French I do not understand English could you give me the exact measurement of the long tube c urgent really Thank you mr
@@HI-PSI I am French I do not understand English could you give me the exact measurement of the long tube c urgent really Thank you mr
Osm hai yaar
Nice clike hare
#smzstudioshortfilm4k
So osm video
#smzstudio
Nice ideas
Bạn có sáng tạo làm gimbal cho điện thoại rất hay 👍👍👍👍👍👍🤝
Plan to make my own
Thanks for the nice idea bro
I am French I do not understand English could you give me the exact measurement of the long tube c urgent really Thank you mr
Nice bro
अगर आप घर पर मोबाइल से वीडियो शूट करने वाला स्टैंड बनाना चाहते हैं तो बना है मात्र ₹50 में ट्राइपॉड एक बार हमारे चैनल पर जरूर आएं धन्यवाद
Such a useful video!
Mummy Baby Blog thank you!
Thanks for share this idea
N i am the new subscriber in your channel
Nicee
great...
Wonderful bro...
очень даже хорошо, спасибо за идею.
very nice idea . preety helpful
You should have make it with steel pipe..that would be more heavy and stabalize
Or you could fill this with sand and seal the caps.
I'll try it
very nicwe , , , wtf background music
Wow a training video on how to make DIY videos 529 need support too
Awesome dude.
Wawa..keren
Только не говорите мне, что эта дрянь стабилизатор?)))
Good job 😍
very innovative
Nice video
Thank you
Ainda não vi pra que serve! mas alguém pode dizer?
Nice rig great idea! - subscribed
Nice
Thanks great job
That's amazing job thank you for sharing
I am French I do not understand English could you give me the exact measurement of the long tube c urgent really Thank you mr
Etna achaa bnaya hai to kamse kam video bhi thik se bnata bhaii kya hai ye
Using a solder iron for this project is not lazy. It's more...progressive Amish.
DigitalPraise7 lol, great comment
Thank you very much. Very creative. Very useful for shooting my channel videos. Liked and subscribed. God bless you.
Thank you nice video
good job so beaUtiful
Thanks For That IDea Dont Have To Buy Tri Pads i Just Made Just Like That 😊
Great idea! Good Rig!
Goldpen Thank you!
desi desi song
wow....!!!
thanks Bro
saya mao bikin juga
👌😄😄
love this ...thank you ......
Sanu be bna doo
this is cool!
Henry Hall thanks man!
Cooool
Guzel
Love it
Check out my newest vid. Another cool/easy PVC device build for your phone.
Iam whet subcribe you my friedns
Good loock
wow
Complicated
How?
@@HI-PSI I think so hundred is only e elements, but overall the design is very simple and easily repeatable