Thanks for this informative video. One minor 'correction' though: You do not have to undo the first 2 screws. For those who have trouble replacing bulbs, lift the front corner up and unscrew the 6 screws on the upper part of the wheel arch liner, and you'll get a good access to replace bulbs.
Will you be able to replace all pf the bulbs like this? I know the front turn signal bulbs are tricky to reach but if I am able to lift the car and remove those 6 screws and replace the bulb that way it would be great
Access from the BOTTOM is much easier! With the wheel turned toward the engine, use a T25 to remove 3 screws holding the wheel well liner (3:20), pull back the liner carefully, and you're there.
Thank you so much for sharing! I tried for few hours on my own and would've failed without this, but can now see how it goes - and 150 euros saved. What an idiotic design flaw from Volkswagen to make it this complicated!
Can’t say this took me 7 hours to do before I watched the video….Also broke a headlight clamp in the process. Was a right pain. I’d say I’m a professional now though how many times I had them lights in and out of their holder!!
Used this video to remove headlamp on my UK 2017MY Golf GTI to replace the headlamp washer jet after it became frozen and the clips for the cover broke last winter. 🙌🏻
Unbelievably difficult compared to my 2013 Kia Rio 5 which took 15 minutes to remove the whole headlight assembly. What were the design engineers thinking!! Make it Simple!!
Very helpful indeed - thank you. A sad comment on the evolution of the design, though. You can change a headlight bulb on a Mk III at the roadside in the dark with no tools in about five minutes.
Stop putting screws and tools in the engine compartment. That is a recrpie for drops and forgotten stuff. Later on the road: "What was that sound?". I have even dropped into a carbureator 😂 😊😂
Or alternatively you could just take the cap off the back,unscrew the bulb holder,replace bulb,replace cap..all done..under 5 minutes, but if I needed to remove the whole unit then yeah this video helps..
So, it's obvious that automotive engineers have parts of their brains removed when they take the position. The only interesting question is: 1) Is it done surgically, or 2) do they inject some sort of targeted parasite into theirs ears that just eats away the part of their brains where common sense is located?
Thanks for the sweat GW. VW should be ashamed of such a poor design that requires all that work to change a light bulb. Another example of making sure their less capable customers HAVE to go to a dealer. Shame on VW.
So, VW be very ashamed - imagine your driving 500 miles at night (I often do), headlight bulb goes - so impossible to replace roadside - VW should not be allowed to sell this vehicle, it is an accident waiting to happen... stupid design!
@@jgame8730 well this is not something I will consider as job for someone else, I am just pissed on VW for making such stupid thing harder for me to fix, I will just switch Golf to Corolla or something. ;)
I know this is an old comment but... Not if you're just doing Halogens since they have the easy plastic handle on the bulb to screw in. My LED has no handle and my hand is too big to fit between my fuse box and the low beam spot to screw it in. Off comes my bumper.
Zdarec nejde místo tohoto nejde to trošku jinak....nadkoli plastu oddělat a vyměnit žárovku H7......tohle je že při zpětné montáži se musí světlomet zkalibrovat ....kvůli žárovce to přece nebudu rozdělávat celý...nebo musím?
Thanks for the vid... what a pain in the @$$! One would think the "mighty german Volkswagen" company would make it at least a LITTLE easier to remove the headlamps... d@mn! BTW, not to offend or anything, but dude, why don't you clean your car once in a year or two whether it needs it or not! :-P It will look nicer, and last you MUCH longer in the long run. Thanks again.
This man is a legend, he takes his light off for us😂 and then puts it back again! I tought he will put a golf 7.5 light on or something.. LEGEND
the 7.5 won't fit in the pre facelift models
@@JanoBanano1996 “or something”
Thanks for this informative video.
One minor 'correction' though: You do not have to undo the first 2 screws.
For those who have trouble replacing bulbs, lift the front corner up and unscrew the 6 screws on the upper part of the wheel arch liner, and you'll get a good access to replace bulbs.
Will you be able to replace all pf the bulbs like this? I know the front turn signal bulbs are tricky to reach but if I am able to lift the car and remove those 6 screws and replace the bulb that way it would be great
Access from the BOTTOM is much easier! With the wheel turned toward the engine, use a T25 to remove 3 screws holding the wheel well liner (3:20), pull back the liner carefully, and you're there.
Thank you so much for sharing! I tried for few hours on my own and would've failed without this, but can now see how it goes - and 150 euros saved. What an idiotic design flaw from Volkswagen to make it this complicated!
Great video, the engineers did well on making a simpel headlight removal so difficult..
This video shows very clearly how to do this. Completed today and the instruction is much appreciated.
Thank you so much for your video! It helped me figure out where I went wrong on my headlight repair !!!! Much appreciated.
thanks for this. excellent practical tips. just changed mine in 2 minutes flat. Bulb was $18 at O'reilllys btw.
The same method works for VW Touran from 2016 as well. Thank you for sharing this video helped a lot!
Can’t say this took me 7 hours to do before I watched the video….Also broke a headlight clamp in the process. Was a right pain. I’d say I’m a professional now though how many times I had them lights in and out of their holder!!
Used this video to remove headlamp on my UK 2017MY Golf GTI to replace the headlamp washer jet after it became frozen and the clips for the cover broke last winter. 🙌🏻
Unbelievably difficult compared to my 2013 Kia Rio 5 which took 15 minutes to remove the whole headlight assembly. What were the design engineers thinking!! Make it Simple!!
It’s a VW. Wtf were you thinking when you went and purchased this pile of shit lol
super práce chlape, díky!
Thank you só much for the video , if helped me 👍🏼
Pretty sure you can access the dipped headlamps from the wheel arch? Saves a LOT of trouble
You can indeed, takes maybe 10 mins Max per side
Merci pour ta vidéo je viens de le faire , j’ai mis un peu moins de 1 heure 👍
Very helpful indeed - thank you. A sad comment on the evolution of the design, though. You can change a headlight bulb on a Mk III at the roadside in the dark with no tools in about five minutes.
also in mk5 you just need bulbs to change thats it
Thanks a lot. Save me $$$ by doing it myself. I helps playing it at 1.75X.
Thankyou! good video
Very well shot considering how awkward that job is to do and film.
pomohlo, vdaka 👍 uzitocne pre tych, co maju xenony
What a stupid design with that bolt through the bumper support into the headlight.
Totally agree
If you repeat this process on the driver’s side, do you need to disconnect the bonnet release cable from the metal headlight bracket?
謝謝你
剛好要拆換
So on reinstalling, can you recommend not screwing in the bastard behind the front plastic?
HILFE: Wie bekomme ich den Sensor-Klip hinten rechts unten am Luftfilterkasten (=Motorabdeckung) beim Golf 5, FSI (2005) runter????
Thanks
please also make more videos on VCDS programmings
exactly what I needed :-)
Thank you so much for sharing!
Thank for your video bro, helped a lot!
Very helpful! many thanks!
Is it Possible to chance the headlights Glas ? They sell Glasses on Ebay , but is it possible ?
Hi can you do water pump and thermostat replacement on this engine please would be a great video . Thanks
Thank you👍🌹
Why to take out the hole headlight? I just changed my bulbs on spot
thanks for the video. whata POS design by vw
What a legend. 👍
Great video
Thank you so much!
👍👍👍👍👍👍
T30 & T25
Excellent
Stop putting screws and tools in the engine compartment. That is a recrpie for drops and forgotten stuff. Later on the road: "What was that sound?". I have even dropped into a carbureator 😂 😊😂
Todo muy bién pero yo he cambiado las bombillas sin quitar los faros .🤭
Actually the easier ways is to remove the fuse box and the ECU...standby size 10 rachet...2 screws thats all
Informative
I need to do this so if he can do it I can
Mine have been changed today without all that mess. You need to speak to polish people😂😂😂
Or alternatively you could just take the cap off the back,unscrew the bulb holder,replace bulb,replace cap..all done..under 5 minutes, but if I needed to remove the whole unit then yeah this video helps..
billy bodgit you can’t do that on one side
Try doing that to your right headlight and let us all know what you find....
I removed the cover right in front of the tire, popped the rubber that covers your headlight and was able to replace on both sides. (Low beams)
The right side is actually easier 🤣🤣🤣 takes under 5 mins for both sides no bolts removed anywhere especially no damn bumper removal lol
@@lukeoliver687 you must have girl hands if you can replace passenger side ;)
So, it's obvious that automotive engineers have parts of their brains removed when they take the position.
The only interesting question is: 1) Is it done surgically, or 2) do they inject some sort of targeted parasite into theirs ears that just eats away the part of their brains where common sense is located?
Wow😮😮😮
Thanks for the sweat GW. VW should be ashamed of such a poor design that requires all that work to change a light bulb. Another example of making sure their less capable customers HAVE to go to a dealer. Shame on VW.
The Reality is, you don't! Go in through the wheel arch.
So, VW be very ashamed - imagine your driving 500 miles at night (I often do), headlight bulb goes - so impossible to replace roadside - VW should not be allowed to sell this vehicle, it is an accident waiting to happen... stupid design!
What the fuck?
I changed my bulbs in minutes without doing all that. The removal of the unit is not necessary
It’s a headlight removal tutorial, not just the bulb.
You have to remove front bumper and the front lights to change the bulbs? Seriously?
@@jgame8730 This shpuld take like 5 minutes to change both, wonder why VW is going this way...
@@jgame8730 well this is not something I will consider as job for someone else, I am just pissed on VW for making such stupid thing harder for me to fix, I will just switch Golf to Corolla or something. ;)
No
I know this is an old comment but... Not if you're just doing Halogens since they have the easy plastic handle on the bulb to screw in. My LED has no handle and my hand is too big to fit between my fuse box and the low beam spot to screw it in. Off comes my bumper.
This is ridiculous. I just changed mine in 5mins. Its tight but was able to squeeze my fingers in and remove and replace the bulb. No unnecessary work
Change the headlights for the GTI
It's the identical process
Zdarec nejde místo tohoto nejde to trošku jinak....nadkoli plastu oddělat a vyměnit žárovku H7......tohle je že při zpětné montáži se musí světlomet zkalibrovat ....kvůli žárovce to přece nebudu rozdělávat celý...nebo musím?
Nemusiš. Ide to a má sa to vymienat bez tohto. Toto som myslel ako vymenu celeho svetlometu
@@golfwagen4173 na pravé straně u baterky....už nedám ruce neni přístup na ruce
hi palo....Why is German industry so complex?
when it is necessary to harmonize functionality and design. / this is how it looks /
No it's quite simple
This guy is just dumb
WTF are you doing chief!! Just access the bulb from the wheel arch, it takes less than 5 mins to do - jeeesus!!
Thanks for the vid... what a pain in the @$$! One would think the "mighty german Volkswagen" company would make it at least a LITTLE easier to remove the headlamps... d@mn!
BTW, not to offend or anything, but dude, why don't you clean your car once in a year or two whether it needs it or not! :-P It will look nicer, and last you MUCH longer in the long run.
Thanks again.
oki doki ;-))
Any car that takes 20 minutes to change a bulb isn’t worth buying.
Tres compliquée vw pfffffff
Shit design. My Touareg headlight assembly just swivels out.
Is this wise to post on the internet with all the Xenon stealing, it's like an tutorial on how to steal them...
Cant steal without bonnet open so relax
@@MegaMetinMetin breaking the window there thieves after all
Doesn't the bonnet lock with the doors?
Volkwagen... just because of this stupidly cumbersome way of replacing a lamp I will never buy such a thing
Very complicated method. Don't do this.
오늘 이 영상 보면서 hid 교체합니다
Thanks