AKAI AM-67 - A look Inside , memory repair
HTML-код
- Опубликовано: 23 дек 2024
- thanks for watching / please SUBSCRIBE to my channel
AKAI AM-67
DONATE HERE - paypal.me/IPStereo
my things
I'm filming my video on this - DE- amzn.to/2hNdnXq
Lens - amzn.to/2CBLmrZ
goo.gl/3qYrbx
for a second camera I use this- DE- amzn.to/2AWeCXV
my test speakers DE amzn.to/2jHj0Hf
my monitor speakers - DE- amzn.to/2jGhghe
my second monitor speakers - DE- amzn.to/2jENJon
the sound I record with this DE amzn.to/2hNi1Ez
my stereo microphones DE amzn.to/2hO4flk
second option for recording sound DE amzn.to/2hNZl7U
my device for phono test DE amzn.to/2hNh1AE
my studio headphones DE amzn.to/2jHpFAX
my studio microphone - DE- amzn.to/2neHyW6
second microphone DE amzn.to/2jFZ1sc
my mouse - DE- amzn.to/2hMvvRk
my NAS DE amzn.to/2hNHvBZ
Akai AM-67
Digital Integrated Amplifier (1991-93)
Specifications
Power output: 110 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 0.05%
Damping factor: 45
Input sensitivity: 2mV (MM), 150mV (line)
Signal to noise ratio: 86dB (MM), 102dB (line)
Channel separation: 55dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω to 16Ω
Digital inputs: coaxial, optical
Dimensions: 425 x 177 x 401mm
Weight: 14.8kg
Accessories: RC-A67 remote control
Hello!
Which song at 7:20 when you testing amplifier?
Beautiful amp! Beefy transformer. Love the gold filter caps.
The heat sink is low. Saving on aluminium? What leads to overheating as usual..
Yeah im on an AM-69 atm and trying to fix a dead right channel. So far the power amp board voltage readings are all fine, preamp board isnt. Multiple readings are far too low around the dual opamp. My guess would be some old caps died or the mitsubishi opamp dead? gonna replace all and keep fingers crossed it works again :)
Got mine "in the mail" today - such a nice amp.
Is the DAC section any good?
Fortunately, this amplifier does NOT incorporated with DAC. One less problem for future breakdowns. All digital players have better DACs than those included in integrated amplifiers.
HI, Excellent sound. What CD player is this?
I like AKAI last 30over is quality good now never see market.
Hello, did you change a special capacitor that works as a battery backup for IC?
More than a look inside this is a complete unit disassemble!! lOL..... ahhh, now I see that you have fixed up the memory retention cap.!! Very nice amp!
Una bella Bestia di potenza e versatilità.
Sir akai am 67 Indian price???
It's avilval in India
Akai stereo amplifier uc u2 per repair video ban do
Two pair for the final transistor, how many watt the output power?
110 watts per channel into 8Ω (stereo)
Welcome. What is this battery, how many volts, where can you buy it? He searched the internet and couldn't see.
Thank you.
it's a capacitor for button memory Panasonic SD 0,22F 5,5V Gold-Cap - ebay.to/2S5vW8E ,
Hi! Front Panel aluminium or plastick?
plastick
Ive got the same one, its clicking randomly like its epileptic. sounds like a relais freaking out...
My 30 years old AM-67 has the same problem, even after disconnecting all IN and OUT cables (save power). It tends to click more while I am switching the output selector, clicks a lot when left on A+B, a bit less on A and on B, and does not click at all with output switched to OFF. Could you eventually identify the cause of the freak clicking sound?
@@LucaTutino hi, sounds like exactly my prpblem. I have no idea i hope some one klcan respond with where too look.
This causes a faulty ALPS speakers switch. You can see them at the time 04:54 in the video. Very often, the Direct switch is also defective, as is the Rec selector switch - when digital is selected, the LED of one of the digital outputs flashes. I think that these switches can be properly repaired only by disassembly, they are oxidized. The contact spray (in injection syringe with needle) help a little - then you must rotate with the switch for "half an hour". On the other hand, the bass, treble and balance potentiometers as well as the volume can be repaired with contact spray quickly and without problems (the contact spray can get into them better, they are open from below, only volume is closed). I also usualy repair microswitch with good contact spray. I hope I helped, today I repaired this amplifier - all switches (after contact spray i was rotate very long time), potentiometers, microswitch and supercapacitor was defective.
@@milanpodloucky7552 thanks for your reply, i will check this out.
@@milanpodloucky7552 ahoj, jaký kontaktní sprej používáš? Všichni mě zrazují od kontaktolu. Mám AM-67 a buď mám zanesenou dráhu volume potenciometru a nebo už je vydřená (pravý kanál se chytne až přidám hlasitost). Díky za odpověď
не знаю как этот акай, был техникс 85 года, su-v1x, не впечатлил совсем, правда на крупной микрухе. а вот муз.центр маранц 540 на аn 7164 очень впечатлил (в качестве усилителя), а современые маранцы 6003 и 8003 полное фуфло.
I want am 67 in india
Ахуенно!!!! Sunken рулят.
Not impressed