As much as I love AirsoftPro's upgrades, I believe that this -as any gas in bolt design- is not a good idea, as the inherit power inconsistency it's just too much for a sniper rifle. A regulated CO2 source would be much better, as it would provide great consistency and adjustability for field limits. Anyway, keep up innovating!
This was true 9 years ago, fortunately nowadays it's much better. I never fielded spring snipers because it's just so inconvenient to operate the bolt and on top of that they don't open up like real bolt actions, fortunately a KJW M700 with minimal upgrades does the job these days. But indeed the first 20ish shots from a CO2 mag are too powerful and the last 20 too weak, nothing you can do about that, except to master green gas mags.
For me it still has the problem than most CO2 SVD kits has, instability on FPS causing it to be really difficult to adjust hop up and causing the BB to go crazy in the fly. Nonetheless nice kit.
It takes any AEG barrel, any AEG spring and any hop-up rubber with very little effort. The CO2 upgrade is super fun, but tends to fuck up accuracy as the fps is sporadic at best. U might wanna upgrade the piston first. Just slap an extra o ring on the basic(cheap) or buy the new from Airsoftpro.
Can anyone answer me this Once you replace the cylinder head to use the CO2, can you use the same one if you wanted to go back to spring or do you need to replace the head again? Cheers
Malá otázka, ta rezonance po výstřelu (zní to jako 3 výstřely), má to nějaký vliv na zbran? jestli se opotřebovávají díly kvůli tomu druhá otázka: když dám na zbran tlumič, ovlivní to střelbu? (znám zbraně kterým se totálně rozhodí víření vzduchu při nasazení tlumiče- nestřílí to) poslední otázka: jaké střelivo (váhu) doporučujete po instalici setu?
I have a severe issue with this. I bought the conversion kit, did everything I was supposed to to put it together, everything is in the right spot BUT..... when I put in the co2, the entire canister discharges all at once. Any advice on this? I've already swapped it out once, but the replacement does the exact same thing. I am completely at a loss here, I really want to have a co2 sniper, but I'm getting a little irritated with this issue constantly popping up. I should note that the co2 escapes straight out of the nozzle, not around the threading of the container.
sangjester19832 use caliper. Measure diameter properly. Order from Amazon 10 rings for 5 dollars. If internal diameter is not much, use drill to get proper size. In my case it worked.
+sangjester19832 you "really want to have a co2 sniper" But you don't want to do anything else then buy in at drop it in. Sorry You don't understand how airsoft sniping is. Or the sport what so ever.
Can I use gen 1 cylinder in gen 2 system? Hence I could faster "repower" my SVD when I could just swap another primed CO2 cylinder inside when removing the other.
Доборго времяни суток , что хотелось дополнить напрявляющяю возвратной пружины не подходит по резьбе (она просто менше) и зацеп у стоковой СВД алюминь или чтото вроде того стирается об стальной фиксатор так его назову просто за несколько выстрелов стало ощютимо нужно его менять на более крепкий. И постарайтесь при игре не потярять запчясти при замене . Это всего скорей для пострелушек на даче по банкам))))))
+Nikolai Kravchenko The 2nd gen already has the m150 spring factory installed. The CO2 conversion is meant to make it easier to load each round into the chamber while maintaining that high amount of fps we so desire.
Hi, im just wondering if this kit would work for the king arms svd dragunov airsoft sniper, also do you have to have a that blue hop up for the co2 to to work?
The answer to this question is yes, the 450 spring works, however, the 800fps spring does not work as well as the other spring, when you pull the bolt back with the 800 fps spring the co2 presses on the bolt and sprays out. So you loose some of the co2. However, that's the only thing wrong with it. I would of like a response before I bought it, but I decided to take the risk. I do not really appreciate the lack of help you guys gave me. You should really think about that.
hello, is it possible to shoot 500 fps with this CO2 kit? because that is the limit in my country. And what exacly are the benefits from this CO2 kit? Thanks
about how many bbs can it shoot before needing a refill and is there a way to lock the fps at 500 because all of the fields within 3 hours of my house have a no exceptions 500fps max rule.
the short springs are probably the same as regular AEG springs if you can get a low powered AEG spring just cut it to fit and use it instead of the spring they provide... just got mine today will test it out
Hi, i have a co2 driven sniper rifle, it look like a vsr 10, but i dont know the manufacturer or the model (bought second hand). I want to make a conversation to only spring driven sniper. Do you have any solution plz pm me. I need help! Best regards
so on average 600 fps per shot? Ive been wanting to do this with my SVD but reloading the co2 seemed like a death wish on the field. good thing i didn't do this before bad blood they would have band the use of it XD so I have to ask... how much tension does it take to cock it? Im guessing its been reduced dramatically and two how many shots can you get off before you really loose your effective range (before the co2 runs out i mean?)
I dont see a point of this mod... takes ages to change CO2, 735 fps is illegal in Europe, loses fps very quickly -130fps in 18 shots, will be worse in cold weather plus you wouldn't want to change CO2 in cold and bad weather.
For me, to do this conversion and to not get a semi-auto is pointless. Now you are dependent on buying CO2 cylinders, and dumb question, how do you load a new one without taking the gun apart? This is typical of someone who is in love with their own gimmicky solution to a non-existent problem. I mean the presentation here is obviously done by a magician because I do not clearly see the insertion of any sort of regular CO2 cylinder, yet his gun magically shoots. That tells me there is no convenient externally available quick-change set-up in this extensive parts replacement, that obviously is best done by someone with the tools, dedicated workspace and experience.
Pokud to někdo při takové úsťovce nasype do člověka z dvaceti metrů, tak určitě. Kamarád říkává, že si lidi nemaj cpát do zbraně silnější pružinu, než je jejich IQ. A o tom to je. Čím větší úsťová rychlost, tím zodpovědnější musí člověk být.
I was hoping it would turn into semi-automatic haha
Dont use the hammer on the cylinder head. Trust me.
yeah i would go with a rubber mallet im cringing as he is samacking that.
If this guy is in a service technique... I would fired him
As much as I love AirsoftPro's upgrades, I believe that this -as any gas in bolt design- is not a good idea, as the inherit power inconsistency it's just too much for a sniper rifle. A regulated CO2 source would be much better, as it would provide great consistency and adjustability for field limits. Anyway, keep up innovating!
This was true 9 years ago, fortunately nowadays it's much better. I never fielded spring snipers because it's just so inconvenient to operate the bolt and on top of that they don't open up like real bolt actions, fortunately a KJW M700 with minimal upgrades does the job these days. But indeed the first 20ish shots from a CO2 mag are too powerful and the last 20 too weak, nothing you can do about that, except to master green gas mags.
For me it still has the problem than most CO2 SVD kits has, instability on FPS causing it to be really difficult to adjust hop up and causing the BB to go crazy in the fly. Nonetheless nice kit.
can you do this conversion on a Kings arms spring svd?
Thank you this will help me upgrade my rifle for my next video!
Where could someone get upgrade parts for the spring A&K SVD ? Also could you do a video on how to upgrade this (Spring)
It takes any AEG barrel, any AEG spring and any hop-up rubber with very little effort. The CO2 upgrade is super fun, but tends to fuck up accuracy as the fps is sporadic at best. U might wanna upgrade the piston first. Just slap an extra o ring on the basic(cheap) or buy the new from Airsoftpro.
Can anyone answer me this
Once you replace the cylinder head to use the CO2, can you use the same one if you wanted to go back to spring or do you need to replace the head again?
Cheers
I thought as much, just didn't want to cause damage to the gun if I did decide to switch back.
Thanks for the help.
Could you show me how to upgrade gel ball to Airsoft on this SVD
Přijde vám humání brát ocelové kladívko na píst a trysku? Nebyla by lepší třeba dřevěná nebo pertinaxová palička?
Ano z toho mi běhal mráz po zádech.
S ohledem na fakt, že čím vyšší je hmotnost, tím nižší je rychlost, zajímalo by mně jakou by měla zbraň rychlost při vaze kuliček 0,40g ?_
Is there a way to lower the fps to a 500-550 range?
Malá otázka, ta rezonance po výstřelu (zní to jako 3 výstřely), má to nějaký vliv na zbran? jestli se opotřebovávají díly kvůli tomu
druhá otázka: když dám na zbran tlumič, ovlivní to střelbu? (znám zbraně kterým se totálně rozhodí víření vzduchu při nasazení tlumiče- nestřílí to)
poslední otázka: jaké střelivo (váhu) doporučujete po instalici setu?
I have a severe issue with this. I bought the conversion kit, did everything I was supposed to to put it together, everything is in the right spot BUT..... when I put in the co2, the entire canister discharges all at once. Any advice on this? I've already swapped it out once, but the replacement does the exact same thing. I am completely at a loss here, I really want to have a co2 sniper, but I'm getting a little irritated with this issue constantly popping up. I should note that the co2 escapes straight out of the nozzle, not around the threading of the container.
+AirsoftProCZ thanks. Sadly you're out of stock and evike (where i bought the kit) doesn't have a thing for it. Kind of sick returning this.
sangjester19832 use caliper. Measure diameter properly. Order from Amazon 10 rings for 5 dollars.
If internal diameter is not much, use drill to get proper size.
In my case it worked.
+sangjester19832 you "really want to have a co2 sniper" But you don't want to do anything else then buy in at drop it in. Sorry You don't understand how airsoft sniping is. Or the sport what so ever.
Can I use gen 1 cylinder in gen 2 system? Hence I could faster "repower" my SVD when I could just swap another primed CO2 cylinder inside when removing the other.
ahoj potrebuju se zeptat pri nekolika vystrelech se mi zacla cast ktera ma v sobe co2 bombicku sama od sebe povolovat da se tomu zabranit??
I have a spring-powered S-M8. Is it possible to convert it to CO2? I can live with it still being semi automatic if it can't be made full auto.
на сколько выстрелов хватает одного балона?
660 is that standard or can someone tell me how to adjust it to do that as I'm a range shooter don't do skirmish too old
hey. awesome vid, I'm not sure if you actually used this much but how many shots would you get with one Co2 cartridge?
Доборго времяни суток , что хотелось дополнить напрявляющяю возвратной пружины не подходит по резьбе (она просто менше) и зацеп у стоковой СВД алюминь или чтото вроде того стирается об стальной фиксатор так его назову просто за несколько выстрелов стало ощютимо нужно его менять на более крепкий. И постарайтесь при игре не потярять запчясти при замене . Это всего скорей для пострелушек на даче по банкам))))))
Won't this take a long time to take out the co2 once it runs out.
Must be a pain in the ass to get a new canister in, I mean it can't be hard but its just a long process in the field
hi
can you tell me does fit same spring for aeg and this sniper?
why not get an m150 spring? a spring isn't prone to losing power in the cold.
+Nikolai Kravchenko The 2nd gen already has the m150 spring factory installed. The CO2 conversion is meant to make it easier to load each round into the chamber while maintaining that high amount of fps we so desire.
Can I do this conversion to a king arms svd also?
will this fit in a asg/ares svd-s ?
Do you share product information on video?
Hi, im just wondering if this kit would work for the king arms svd dragunov airsoft sniper, also do you have to have a that blue hop up for the co2 to to work?
The answer to this question is yes, the 450 spring works, however, the
800fps spring does not work as well as the other spring, when you pull
the bolt back with the 800 fps spring the co2 presses on the bolt and
sprays out. So you loose some of the co2. However, that's the only thing
wrong with it. I would of like a response before I bought it, but I
decided to take the risk. I do not really appreciate the lack of help
you guys gave me. You should really think about that.
It would be very nice to know the music name also..
Thank you for sharing this helpful video AirsoftProCZ my first webshop and always recommended.
wen i put back my trigger pull my safty catch wont work wat will i do
Isn't th FPS between 193 to 204 a bit low for a sniper rifle?
+AirsoftProCZ
Thank you; being an American and used to seeing "FPS", I'm not too familiar with the European style "M/S" rateing.
212 m/s seems a _little_ hot for an airsoft gun. Unless were shooting from that far away.
BC Nation There is things called 0.40 gram bb's
do you sell the dragunov with the co2 kit allready installed?
hello, is it possible to shoot 500 fps with this CO2 kit? because that is the limit in my country.
And what exacly are the benefits from this CO2 kit?
Thanks
Canada?
about how many bbs can it shoot before needing a refill and is there a way to lock the fps at 500 because all of the fields within 3 hours of my house have a no exceptions 500fps max rule.
get the spring version and downgrade. My area has a 510 limit, and I downgraded my spring to do consistently 500.
what spring did u use
+Asura Idk. my buddy had like 5 dif kinds and I just chose the best one.
+Asura just Google it.
the short springs are probably the same as regular AEG springs if you can get a low powered AEG spring just cut it to fit and use it instead of the spring they provide... just got mine today will test it out
tuhle zbran mám doma jinak LIKE !
How many shots do you get out of one 12 gram co2 cartridge?
10 shots at most in 100 celcis fuck russia ukraine better
polska the worst)))
Noo just with tongue is fine...like usual, thanks )))
Will this set work with the Matrix (Bravo) A&K SVD II? Or will it only work with the A&K SVD I models?
Hi, i have a co2 driven sniper rifle, it look like a vsr 10, but i dont know the manufacturer or the model (bought second hand). I want to make a conversation to only spring driven sniper. Do you have any solution plz pm me. I need help! Best regards
im thinking about getting one of these, but i was wondering what kind of m/s or fps would it get using .40 BBs?
Im guessing high 300's or mid 400's
If not... then holy shit lol
Meada Kazuya yea,im getting an M200 spring and and reinforced piston instead.
to byla manualka a vi-y ste z toho udělali plyn na co2
what's that in fps. and how many shots per c02 cartridge
+Isaac Jimenez if you see with atention you can watch that´s are m/s, not fps
+Isaac Jimenez About 65 shots
+Isaac Jimenez ca 650-700 fps
@@dawi4551 well 4.20 joulee is about 650-700 fps :l
Hodilo by se nainstalovat ještě nějakej jinej upgrade něž tam dám to
สั่งซื้อได้ที่ไหนครับ
it's possible to downgrade it to 450 fps ?
AND HOW?
Only with airbrake :)
To the airnozzle...
so on average 600 fps per shot? Ive been wanting to do this with my SVD but reloading the co2 seemed like a death wish on the field.
good thing i didn't do this before bad blood they would have band the use of it XD
so I have to ask...
how much tension does it take to cock it? Im guessing its been reduced dramatically and two how many shots can you get off before you really loose your effective range (before the co2 runs out i mean?)
Tomuhle říkám tutoriál.
210 m/s nice item, 10x man
молотком по цилиндру...:( я так понимаю там и кит такой же :)
This one is no farting when shoot? ( cause older gens are farting xD)
Will this work for any SVD or a certain brand?
*Hodilo by se nainstalovat ještě nějakej jinej upgrade něž tam dám tohle
Make me want to get a SVD
co je to za song? :DDD
Baš niko
That's so freaking dangerous. Should it fail and release all the gas at once,it could do some serious damage.
did you mean an extremely powerful single shot?
I dont see a point of this mod... takes ages to change CO2, 735 fps is illegal in Europe, loses fps very quickly -130fps in 18 shots, will be worse in cold weather plus you wouldn't want to change CO2 in cold and bad weather.
3:05 broo WTF?
nice music
For me, to do this conversion and to not get a semi-auto is pointless.
Now you are dependent on buying CO2 cylinders, and dumb question, how do you load a new one without taking the gun apart?
This is typical of someone who is in love with their own gimmicky solution to a non-existent problem.
I mean the presentation here is obviously done by a magician because I do not clearly see the insertion of any sort of regular CO2 cylinder, yet his gun magically shoots.
That tells me there is no convenient externally available quick-change set-up in this extensive parts replacement, that obviously is best done by someone with the tools, dedicated workspace and experience.
Pokud to někdo při takové úsťovce nasype do člověka z dvaceti metrů, tak určitě. Kamarád říkává, že si lidi nemaj cpát do zbraně silnější pružinu, než je jejich IQ. A o tom to je. Čím větší úsťová rychlost, tím zodpovědnější musí člověk být.
Bruh only 200fps? I have an a&k svd Dragunov with the upgraded spring and it's 500 fps
Not FPS on the chrony, that's M/s.
234M/s = 735fps
4J.. fuck me.. that's illegal in most countries
2 a půl zásobníku
to chci :D
Zbraň pěkná ale 200m/s a vejš je už trochu nehumální !!!!!
Очень криворукий механик
HOLY CRAP.
>4.50 - 5.00 J's
Damn thats hot as fuck.
Get some metal bbs......uhhh squirrel hunting gun now?... LOL
Will this work in a lancer tactical m82?
Lol thats why im here too
Same here, looking for tutorial co2 instalation