The RPM Range is green for low, or safe... yellow for higher but still safe, red for about to reach the rev limiter... typically flashing red is rev limiter. You want to shift before flashing red.
OMG you are too funny dude, your dry humor is just the best for those that are actually fully paying attention lol... Your videos are also thorough and well edited. Amazing what goes into just one of your videos bro. I am entertained *on every fucking level.* Cheers.
@@yasincebeci9625 My colleague 3D-printed this H-shifter. It was difficult to find M3 bolts and nuts, but I made it. Shifter works ok. Handbrake also. Next goal is the DIY pedals and Steering wheel.
6th gear is near enough useless in a normal rally stage. The shift lights are an indication on when you're redlining the car (Reaching the limits of the rpms) and a recommendation to change gear. However, because its a rally car, you dont really need to pay attention, you want to stay in a good rev range, green to yellow, downshift when you drop out of green, and upshift when you move into orange.
Dude, You're awesome. Beyond the intelligent designs you've constructed, Your videos has a soft humor. Here. Thank you for sharing knowledge. I have a problem to solve regarding SIM RACES.. I have a cockpit support, a Logitech g29 and I pay in a PS4. The problem is that I need a handbrake for playing really games such as dirt rally. However, in PS4 I don't have a cheap option.. I see a lot of DYI videos using the joystick to activate, but none has a soft solution that doesn't female de joystick as you have done. I need a 3d printed handbrake that activates pressing any button or the joystick and that can be fixed in the cockpit support or table.. Please help us PS4 dirt rally player games.. Have a nice day
You should try the air link via wifi, or using a program such as virtual desktop (20 usd), it does require a good wifi connection, but it's much more stable and it doesn't disconnect. Thank you for this project, I was searching for this to upgrade my driving setup.
Very smart design, but not a clear instructions. I watched the video 100 times, just to figure out, where the second rubber connects. And there are a bunch of holes in the body, I do not know what is the purpose of those. I still need to wait on the switches to arrive on mail, but over all, mechanically it is working perfectly
@Akaki Kuumeri is it possible to modify the arduino programming and thus remove the potentiometer and make the handbrake with a microswitch? so it can be used on arduino nano boards.
1st print failed due to power lise. Second print good. Arduino arrived broken so i ordered New one. Shifter works okayish. Little sloppy but you can fine tune it. Handbrake code was missing but i added myself works great. Overall really happy.
Hello my friend. When you write the codes you gave to the arduino pro, how does it perceive it as 5 switches even though there are 3 switches, and will the games see the arduino as a game console?
Why not set up a table... ie: Add up the values like chmod and access a table... a big if / else if tree can be just as slow as a for loop of known length. But if you have the table, then it is just more overhead ( memory in use ) and direct access. Less code too - just more setup data. Should respond faster too.
I printed it and I have a question ... I connect the "NO" part of the microswitch to digital pin 1, 2, 3 ... of the arduino board and the "C" part of the microswitch where I connect it to the arduino board? Thank you
I've been watching a few of your videos about 3D printed gear shifters and suddenly a question arises: If you're in Japan, why do you have the lever on the right?
There is a hole for a screw near the far end of the right hand wall. You must put a bolt in that hole and extend a rubber band from there to the dent in the rachet piece. You can see the rubber band ready at 3:38
The fifth and six gears are cruising speed and first gear is a starting speed you only us first if going from a stop sign and such, 2 and 3 and 4 are like for going faster and you don’t look at the light to switch gears it’s in the revs so if it’s a high rev you go to a higher gear and so on but if your in 6th gear and wanna go faster drop down to 5th or even 4 to go faster
In a race car, you do use the lights to know when you're at the optimum RPM to go to the next gear to remain in the engines power band. Shift too early and you will be out of the engines power band and won't have the acceleration you would if you stay in the engines power band. While you don't look directly at the lights, you can still see them (vs the tach) in your peripheral vision as to not take your eyes away from the track but still be able to see the shift lights which is why they're used.
Also, in racecars 5th and 6th are not cruising speeds, as they use all of the gears available to have optimal acceleration for any given speed (not to mention they don't need cruising speeds). Lastly, when you're driving a racecar, sometimes you do indeed have to drop down to 1st gear, because you're always looking for the gear with the best acceleration. This is especially true in rallying, when you're driving through a hairpin for example.
"i used copy and paste to add an extra gear" lol. Like the constant development and the humour.
Haha, it wasn't so far from the truth though. I did duplicate one of the earlier gate grooves to cut the extra grooves out.
The RPM Range is green for low, or safe... yellow for higher but still safe, red for about to reach the rev limiter... typically flashing red is rev limiter. You want to shift before flashing red.
Stepping up the game on RUclips! 😊
OMG you are too funny dude, your dry humor is just the best for those that are actually fully paying attention lol... Your videos are also thorough and well edited. Amazing what goes into just one of your videos bro. I am entertained *on every fucking level.* Cheers.
awesome and simple design, cant wait to try it !!
I'm printing it right now. This will be perfect for games like ETS or My Summer Car
can you give feedback
@@yasincebeci9625 My colleague 3D-printed this H-shifter. It was difficult to find M3 bolts and nuts, but I made it. Shifter works ok. Handbrake also. Next goal is the DIY pedals and Steering wheel.
6th gear is near enough useless in a normal rally stage. The shift lights are an indication on when you're redlining the car (Reaching the limits of the rpms) and a recommendation to change gear. However, because its a rally car, you dont really need to pay attention, you want to stay in a good rev range, green to yellow, downshift when you drop out of green, and upshift when you move into orange.
Dude, You're awesome. Beyond the intelligent designs you've constructed, Your videos has a soft humor. Here. Thank you for sharing knowledge.
I have a problem to solve regarding SIM RACES..
I have a cockpit support, a Logitech g29 and I pay in a PS4.
The problem is that I need a handbrake for playing really games such as dirt rally. However, in PS4 I don't have a cheap option.. I see a lot of DYI videos using the joystick to activate, but none has a soft solution that doesn't female de joystick as you have done.
I need a 3d printed handbrake that activates pressing any button or the joystick and that can be fixed in the cockpit support or table..
Please help us PS4 dirt rally player games..
Have a nice day
thanks!
I believe you can’t use multiple controllers to control a single player game on the PS4, right? In that case it sounds pretty difficult.
mate you are a modern-day inventor!!
the only problem is i don't know how to solder the micro switches to the pro micro
can you make a video about that?
If anyone is looking for the files, Here they are: www.thingiverse.com/thing:4586309
Thanks, I totally forgot the link!
You should try the air link via wifi, or using a program such as virtual desktop (20 usd), it does require a good wifi connection, but it's much more stable and it doesn't disconnect.
Thank you for this project, I was searching for this to upgrade my driving setup.
can you please make a build guide for this stick?
hi, can you add the code for handbrake? it would be very useful, thanks
Thank you for sharing it is very useful for me
continued success, always healthy friends
Very smart design, but not a clear instructions. I watched the video 100 times, just to figure out, where the second rubber connects. And there are a bunch of holes in the body, I do not know what is the purpose of those.
I still need to wait on the switches to arrive on mail, but over all, mechanically it is working perfectly
wiring diagram? So I can't put it together that there is hardly anything about the gearbox in the video
@Akaki Kuumeri is it possible to modify the arduino programming and thus remove the potentiometer and make the handbrake with a microswitch? so it can be used on arduino nano boards.
Sure, should not be hard. But you still can’t use it with a Nano because the Nano can’t emulate a gamepad
Please add more detailed installation video
I've posted more informative video how to assemble this shifter: ruclips.net/video/xyWhzIESEnE/видео.html
@@S60Team omg nice
i started printing it and ordered arduşno pro micro clone. fingers crossed. 🤞
1st print failed due to power lise. Second print good. Arduino arrived broken so i ordered New one. Shifter works okayish. Little sloppy but you can fine tune it. Handbrake code was missing but i added myself works great. Overall really happy.
@@badvoiceallnoise what code did you use?
i mean its cool, but dont rallye cars use mostly sequential shifters?
The never ones do but its alot more fun to use a normal stick
Good ol quest...so is it possible to make a dual shock steering wheel
The lack of build guide and excessive use of embedded nuts into circular holes made this design frustratingly impossible to assemble.
I've posted more informative video how to assemble this shifter: ruclips.net/video/xyWhzIESEnE/видео.html
What do I search for to get the screwclamp you've used to mount to the desk?
Hello my friend. When you write the codes you gave to the arduino pro, how does it perceive it as 5 switches even though there are 3 switches, and will the games see the arduino as a game console?
really want to use it but theres not much instruction ended up buying the wrong switches because there's no exact model number/name
I love it :)
Why not set up a table... ie: Add up the values like chmod and access a table... a big if / else if tree can be just as slow as a for loop of known length. But if you have the table, then it is just more overhead ( memory in use ) and direct access. Less code too - just more setup data. Should respond faster too.
I printed it and I have a question ... I connect the "NO" part of the microswitch to digital pin 1, 2, 3 ... of the arduino board and the "C" part of the microswitch where I connect it to the arduino board? Thank you
Ground
Hello, where can I download the Arduino code?
I've been watching a few of your videos about 3D printed gear shifters and suddenly a question arises:
If you're in Japan, why do you have the lever on the right?
Most of the cars in these games have it there
Do u have somewhere the arduino code?
i dont get where did you place the springs at 4:11
There is a hole for a screw near the far end of the right hand wall. You must put a bolt in that hole and extend a rubber band from there to the dent in the rachet piece. You can see the rubber band ready at 3:38
@@AkakiKuumeri ohh got it! thank you!
I've posted more informative video how to assemble this shifter: ruclips.net/video/xyWhzIESEnE/видео.html
Can you make a red shifter for 2010 SS Camaro?
Can you make a320 sidestick
Please drop full video explanation with all components, and code! Ukrainian pilots will be very grateful!!! Thanks
Do you have a build log or files for it?
www.thingiverse.com/thing:4586309
I've posted more informative video how to assemble this shifter: ruclips.net/video/xyWhzIESEnE/видео.html
hi could you add the file for the arduino code please
Did you do?i couldn't
pastebin.com/SbLFXNye
gist.github.com/S60Team/c1bbf2213d1e3d329750244cfe450a89
Pls share Arduino code how can I do it share a video about it pleaseeee
I did not understand what you did pls
pastebin.com/SbLFXNye
@@IbbiAhmed eyvallah
@@IbbiAhmed hacim bisey sorcam bu birlestirmeyi tam anlayamadim sen birlestirebildin mi
@@samiluyumez i cant understand what youre saying
The fifth and six gears are cruising speed and first gear is a starting speed you only us first if going from a stop sign and such, 2 and 3 and 4 are like for going faster and you don’t look at the light to switch gears it’s in the revs so if it’s a high rev you go to a higher gear and so on but if your in 6th gear and wanna go faster drop down to 5th or even 4 to go faster
In a race car, you do use the lights to know when you're at the optimum RPM to go to the next gear to remain in the engines power band.
Shift too early and you will be out of the engines power band and won't have the acceleration you would if you stay in the engines power band.
While you don't look directly at the lights, you can still see them (vs the tach) in your peripheral vision as to not take your eyes away from the track but still be able to see the shift lights which is why they're used.
Also, in racecars 5th and 6th are not cruising speeds, as they use all of the gears available to have optimal acceleration for any given speed (not to mention they don't need cruising speeds). Lastly, when you're driving a racecar, sometimes you do indeed have to drop down to 1st gear, because you're always looking for the gear with the best acceleration. This is especially true in rallying, when you're driving through a hairpin for example.
U shift in the red
Can we use it for ps4?
Maybe and maybe not, consoles are pretty strict on what you can connect to them.