Disclosure : I may be an affiliate of any product shown or tested here on the channel. It may have been free or given to me by a discount. Either way. It is my duty to you the viewer to give an honest, unbiased opinion on an item. I’m pretty straight forward. If something sucks I will let you know. If you choose to purchase a product from a link here I may benefit from a small commission. Or may not if it is a company who just sent it for a one time review. I don’t get paid for making a video. So to those of you who do support the channel I want to say thank you in advance. Please keep watching and I will keep up the great videos!
The F4 is great, mine only uses 6% CPU with gyro and pid loop set to 8khz. Very smooth flyer on my 160 frame. Just a tip when flashing this board, a toothpick works great for pushing down the gold button to enter bind mode (don't use metal). For GPS flyers, I used uart6 for ibus receiver, uart1 for gps and uart3 for compass wires. (no need to identify compass in Betaflight uart3 - it will see that it's there).
great video, That black one is a clone, Im sure most of the quad stuff you get from that site will be clones ,but regardless in most cases just as good. I run a Omnibus F3 running D shot on Lumemier 2206 11 2350 motors = smooth. But bull nose 5045s are a must if you want that extra punch. Keep us posted on performance with that combo your running now. Looks sweet
Hi I have this fc, when I Connect to the lipo the 5V output is zero and the video input doesn't work but when I Connect to USB pc everything works fine
Is that PPM/SBUS pin inverted or non inverted. I’m trying to hook up a flysky X6B in IBUS config which requires a non inverted UART. Nobody ever talks about wiring IBUS on this board.
Hi .. very direct simple video. I’m builder no almost the same using exact FC . What is the board below the Omnibus fc in the video placed on frame and what is it for ? Thanks
I would like to use a spektrum with the OMNIBUS F4 PRO what is the name or what kind of connection do I need? I need to order the plug but I don't know what it is called
So.. what is the answer to your question? :).. I'm back into the hobby after roughly 3 years out and also have a Futaba pwm receiver and wondering if I'm going to face a problem. Thanks.
f4 pro - is not necessary to conect + battery wire directly to fc (bat +) and then + wire from (MOTO) fc to pdb? to use current sensor? i think this is second way to connect fc and then you have correct current value which fc can read... then you can see eg. osd how many amps have been used
+Mojzu I believe you are absolutely right. As far as I can see from the video, with this setup, the FC will only be able to read its own power consumption (not the ESC/motors). :-/
I have the F4 Can you advise me on the Vbat wire There are lots who say ,not to wire direct to vbat on the 3rd from top as this get the board very hot What is the correct way to wire this Thanks
Hi My friend, what PDB would you put with this I'm a new builder but not a new flyer, I would be building a 450 or a 500 quad and would start with a bare bones and then add GPS +++++ Thanks John
im doing a 6s build and i have the omnibus f4 osd flightcontroller. is there anyway to hook up the vbat with this type voltage with the osd working. i just realized i think this board is 2-5s direct power connect. i could always connect the vbat with vreg off of the pdb to keep voltage in its limits but i would loose the correct voltage for osd to give me correct readings any thoughts?
Omnibus F4 Pro V3 Flight Controller with Current Sensor, OSD and SmartAudio i ordered one and replacing a hyperlite f4 that some reason after 12 flights and coming in landing after flying good and 13th lipo it did a double startup chime and after checking betaflight it lost all data!! dont make no bit of since but has any issues resolved on the omnibus cause im so tired of replacing crap becouse of common issues like i mentioned. Im hoping this is great flightcontroller is there anything special wiring on frysky x4r-sb? and will smartport work without mods?
Hi! awesome channel! I have a question. I wired everything according to numerous videos and I plugged my DSMX receiver to the port (works on uart 3 in my case). Everything works perfect for like 5 seconds, and then the receiver loses signal. Any advice would be really appreciated.
I was powering a small camera and micro VTX with one of mine and the board suddenly stopped working. It will no longer power from the battery but will with a 5v input but now now vbat. It was well known that there were problems doing that with V1 of the board, is that still a problem with V2?
Did the FC powering up directly from the dattery? Or you've got some extra 5v supply line? I've connect it throw the current sensonr, and it dosn't powering up from the batt. Seems like it wants some external 5v source. Is there any jumper to select it? UPD: and it doesnt wort throw the external power =| But with usb powering on is ok. What I'am doing wrong?
Hello my man can you tell me where I can hook up a sonar module on this flight controller I would really appreciate it. I am stuck for days man trying and surfing youtube for any wiring diagram or explanes
The flight controller of my wizard 220S got mess-up I replaced. Now in my goggles I have picture but xXxX and 0000and vvvvv are in the picture as well. Why is that can you tell me. The flight controller is a omnibus f4 v3. I notice a push bottom a little one I'm afraid to touch it don't know for what it is. If you So kind I been watching your videos I'm glad you very knowledgeable I have learn a lot. If you can tell me why is this I will appreciate. Thanks. FlyingScorpion 15.
can you help me out im having trouble getting the receiver connected to the fc i have an omnibus f4 pro same as urs im using a frsky x4r receiver with sbus
hi: got 2 of those boards. the led strip doesnt work on the J1 port; already know that the led mapping was changed to pwm6, I've connected led signal to pwm6 and using 5v and gnd from J1 but still doesnt work. Have u managed to use some ws2812 led strips on these? thanx
hello can anybody tell me with omnibus-f4-v2-pro-flight-controller i need to use PDB (power distributor board) and for motor can i use *ESC 30A for 2300Kv motor ?? please answer me asap im doing first time project with drone so i dont have idea
Just trying to connect my video Tx and camera, when I have the board powered and I connect the vtx signal wire the OSD information shows up on my screen but soon as I plug my camera signal wire in, the camera video feed comes on but the OSD information disappears, what am I doing wrong. I'm using the F4 Pro
Disclosure : I may be an affiliate of any product shown or tested here on the channel. It may have been free or given to me by a discount. Either way. It is my duty to you the viewer to give an honest, unbiased opinion on an item. I’m pretty straight forward. If something sucks I will let you know. If you choose to purchase a product from a link here I may benefit from a small commission. Or may not if it is a company who just sent it for a one time review. I don’t get paid for making a video. So to those of you who do support the channel I want to say thank you in advance. Please keep watching and I will keep up the great videos!
I know its old but this is still the best video i can find on this board, thanks!
Nice simple walk around off this board ,thanks...
These videos are so helpful. Thanks for doing these.
TY for the heads up on the SD card..
Hey man thanks a lot for the video; helped me a lot wire mine!
The F4 is great, mine only uses 6% CPU with gyro and pid loop set to 8khz. Very smooth flyer on my 160 frame. Just a tip when flashing this board, a toothpick works great for pushing down the gold button to enter bind mode (don't use metal). For GPS flyers, I used uart6 for ibus receiver, uart1 for gps and uart3 for compass wires. (no need to identify compass in Betaflight uart3 - it will see that it's there).
Thanks so much for doing this. Great detail.
keep up the good work
the video was very helpfull understanding the board.
great video, That black one is a clone, Im sure most of the quad stuff you get from that site will be clones ,but regardless in most cases just as good. I run a Omnibus F3 running D shot on Lumemier 2206 11 2350 motors = smooth. But bull nose 5045s are a must if you want that extra punch. Keep us posted on performance with that combo your running now. Looks sweet
thnx so much man ive been looking for a guide like this!
also what escs are u running? and where can u get those lc filters?
That LC Filter is from ReadyMadeRC
Running Lumenier 20A 4in1 ESC
do u recommend the .7 or 1.7 A lc filter?
1.7 A
Hi I have this fc, when I Connect to the lipo the 5V output is zero and the video input doesn't work but when I Connect to USB pc everything works fine
The way you have the Pro version shown, the current sensor is not hooked up, correct?
you are correct
I plugged the batt to the + and - and it fried the board. Why is that wrong?
Thanks best of best video!
Is that PPM/SBUS pin inverted or non inverted. I’m trying to hook up a flysky X6B in IBUS config which requires a non inverted UART. Nobody ever talks about wiring IBUS on this board.
Hi .. very direct simple video. I’m builder no almost the same using exact FC . What is the board below the Omnibus fc in the video placed on frame and what is it for ? Thanks
Can you post a parts list?
I would like to use a spektrum with the OMNIBUS F4 PRO what is the name or what kind of connection do I need? I need to order the plug but I don't know what it is called
just bought one heard good things too.
6:22 do u have any video for fix wing
how did your osd act after wiring ground via pbd instead of the ground on the flight board for camera and vtx ground tab any flickering or blackouts ?
Thanks.Good info
Hi, is this possible to use a FrSky iA6 receiver on this board?
Thank you, for this. Is this board comparable with PWM because I'm stuck with walkera PWM receiver.
So.. what is the answer to your question? :).. I'm back into the hobby after roughly 3 years out and also have a Futaba pwm receiver and wondering if I'm going to face a problem. Thanks.
f4 pro - is not necessary to conect + battery wire directly to fc (bat +) and then + wire from (MOTO) fc to pdb? to use current sensor? i think this is second way to connect fc and then you have correct current value which fc can read...
then you can see eg. osd how many amps have been used
+Mojzu I believe you are absolutely right. As far as I can see from the video, with this setup, the FC will only be able to read its own power consumption (not the ESC/motors). :-/
I have the F4 Can you advise me on the Vbat wire There are lots who say ,not to wire direct to vbat on the 3rd from top as this get the board very hot What is the correct way to wire this
Thanks
can you tell if the wiring are the same in f4 and f4 pro?
thkxs
Hi My friend, what PDB would you put with this I'm a new builder but not a new flyer, I would be building a 450 or a 500 quad and would start with a bare bones and then add GPS +++++ Thanks John
im doing a 6s build and i have the omnibus f4 osd flightcontroller. is
there anyway to hook up the vbat with this type voltage with the osd
working. i just realized i think this board is 2-5s direct power
connect. i could always connect the vbat with vreg off of the pdb to
keep voltage in its limits but i would loose the correct voltage for osd
to give me correct readings
any thoughts?
Omnibus F4 Pro V3 Flight Controller with Current Sensor, OSD and SmartAudio i ordered one and replacing a hyperlite f4 that some reason after 12 flights and coming in landing after flying good and 13th lipo it did a double startup chime and after checking betaflight it lost all data!! dont make no bit of since but has any issues resolved on the omnibus cause im so tired of replacing crap becouse of common issues like i mentioned. Im hoping this is great flightcontroller is there anything special wiring on frysky x4r-sb? and will smartport work without mods?
is there a way to hook this up without sbus cause i mess up the pad so it wont work anymore do you have way to use something else
Hi! awesome channel! I have a question. I wired everything according to numerous videos and I plugged my DSMX receiver to the port (works on uart 3 in my case). Everything works perfect for like 5 seconds, and then the receiver loses signal. Any advice would be really appreciated.
Dario HxC I have same problem, did you soivd?
I was powering a small camera and micro VTX with one of mine and the board suddenly stopped working. It will no longer power from the battery but will with a 5v input but now now vbat. It was well known that there were problems doing that with V1 of the board, is that still a problem with V2?
Did that setup give you zero video noise? The + - to the fc doesn't create any noise in the video feed?
I mention you have to use an LC Filter in the vid. ~ JD.
I ditched the LC filter when I switched to BLheli_S 4in1 and Dshot. the digital signal seems to generate a lot less noise.
Did the FC powering up directly from the dattery? Or you've got some extra 5v supply line? I've connect it throw the current sensonr, and it dosn't powering up from the batt. Seems like it wants some external 5v source. Is there any jumper to select it?
UPD: and it doesnt wort throw the external power =| But with usb powering on is ok. What I'am doing wrong?
Ive got the same problem, any clue?
Hello my man
can you tell me where I can hook up a sonar module on this flight controller I would really appreciate it.
I am stuck for days man trying and surfing youtube for any wiring diagram or explanes
ordered mine from bangggod and it's blue?
I am having problem in bataflight loading the com ports could u help me with bataflight?thanks
The flight controller of my wizard 220S got mess-up I replaced. Now in my goggles I have picture but xXxX and 0000and vvvvv are in the picture as well. Why is that can you tell me. The flight controller is a omnibus f4 v3. I notice a push bottom a little one I'm afraid to touch it don't know for what it is. If you So kind I been watching your videos I'm glad you very knowledgeable I have learn a lot. If you can tell me why is this I will appreciate. Thanks. FlyingScorpion 15.
can you help me out im having trouble getting the receiver connected to the fc i have an omnibus f4 pro same as urs im using a frsky x4r receiver with sbus
What the pdb esc 4 in 1 merk ?
hi: got 2 of those boards. the led strip doesnt work on the J1 port; already know that the led mapping was changed to pwm6, I've connected led signal to pwm6 and using 5v and gnd from J1 but still doesnt work. Have u managed to use some ws2812 led strips on these? thanx
its on pwm5
I have vi and v2 omnibus boards and can't get either to work LEDs or servos on pins 5 and 6. I guess this explains both problems.
how hook up motor to f4?
Which is the best omnibus f4 fc?
Airbot f4 or dys f4? Pro or V2/V3?
is there any difference?
I'm a fan of Omnibus FCs
Yes!!!!
hello can anybody tell me with omnibus-f4-v2-pro-flight-controller i need to use PDB (power distributor board) and for motor can i use *ESC 30A for 2300Kv motor ?? please answer me asap im doing first time project with drone so i dont have idea
Hello,
Which have the pro v3 and my LED can not be programmed
What can that be?
Use a 3pin connector.
Markus Clemen check out project blue falcons video
Just trying to connect my video Tx and camera, when I have the board powered and I connect the vtx signal wire the OSD information shows up on my screen but soon as I plug my camera signal wire in, the camera video feed comes on but the OSD information disappears, what am I doing wrong.
I'm using the F4 Pro
Sounds like a ground issue. Make sure the VTX and Camera connect to the same ground.
No 5S option on the pro huh? darn.
What about ppm hook ups
Where to the led strip setup?
today i built a new drone with this board. the osd disapper when I accelerate. someone can help me?? someone have the same problem??
Hello , I need help...
I have a real Airbot Omnibus F4 with a sd card reader and its blue.
Link for LC filter?
Here : www.gearbest.com/multi-rotor-parts/pp_393341.html?lkid=10709002
Wheres the "Drones for dummies" video? Have a new X280 and have NO IDEA what I'm doing.
How about Ibus?
you have to hook to the any UART - no issues
why 270 degrees?
Cause 180 didn't work
devbloggs updating the version of Betaflight fixed the incorrect rotation you mention on my board
Oh great!
first
Thanks Mate
Best video. Thanks