Hey Bot, i enjoy watching your videos a lot. I've stopped watching the other pilots because they are all the same somehow, but you come up with another interesting topic every time and i think that's absolute awesome. Keep doing what makes you happy my friend
been flying the iflight nazgul 5 and it's been extremely durable on bando bashing but my next frame is 100% going to be the demibot. I love the design and out of all the fpv guys out there you're channel has the best content 🙌🙌
Me to on the nazgul, I so wish it didn't have those light channels on the arms. Looks cool, but I broke two arms where the screw goes through the arm and the channel sort of splits there also. Like maybe it would hold off that channel wasn't there? To be fair, I failsafed twice at about 300 feet onto concrete. So I don't know if all arms would break on all drones. Maybe they would. But it flys great
Bought my Roma F5 almost 2 years ago. Love it still. Edit: There are lots of reasons people go BNF. Low stock on parts, long shipping times. They're in a hurry to get started. Don't "want" to solder, or just don't have time.
i literally have 0 problems with my iflight nazgul, its also super easy to work on and upgrade. good to learn tuning on. I have crashed the shit out of it, and only broken props. I literally don't see any problems with bind and flies, other than the fact that they might have wonky tunes from the factory. edit: price also, maybe a few years ago before covid you could source parts for a really good freestyle build, relatively cheap, but you cant do that anymore. I had multiple wish lists and shopping carts with different builds, and I never committed because its cheaper to purchase a bind and fly, and just upgrade as stuff breaks. Using the nazgul as an example, i purchased it for 200 on banggood, even after shipping it was cheaper than buying all of the parts and putting it together myself. Decent stacks are at least $70-100, 4 motors and a spare is at least $60-80 dollars, then add a $20-50 frame, 800mw vtx, Decent good quality camera, receiver, a couple sets of props, thats at least $250, and thats for cheap parts.
The Nazgul frame (both the F5X and the F5D), just like the BotGrinder frame, has 6mm arms held together by 3mm plates. While Foxeer do not give full specs for their frame, judging by the weight, is seems like a very lightweight frame and therefore the carbon used for the arms and plates must be quite a bit thinner? I have tons of time for Doug, but on this one, he does not get my vote as he chose a single B'nF quad and drew generalised assumptions about all.
You're right it is a lot to getting into hobbies, and no one talks about the extras you need, batteries, battery chargers, soldering gun, special tools, taps, solder, zip ties, nuts bolts spare parts to repair frames, on and on. although the Grinderino hasn't broke frame parts yet, i am trying 😊 did take out camera, why do they put square corners on square brick buildings? Plus software, electronic replacement parts, radios goggles. All you see is the drone flown by people who rarely crash, at least in the videos, rearly do I go out to fly 5 packs and come back without broken drone (s). But it is so wild, worth every penny, fun as hell no matter how old you get, started at 67 and wonder why the F*$#@ I wastent involve before. Your videos are real and i enjoy them. I am to old to get as good as you, but fun as hell trying……
Interesting and fun video review of bnf "freestyle" drones, well one bnf. Apparently there's quite a few "pilots" that really like the Nazgul, see if iflight will send you one to rip. I love to build my own, but these days I can see people buying a bnf to get going. Or they don't have time to build or want to. They are so much better than those made just a few years ago. Happy ripping everyone. 👍💖😎
Really? 🤔 Whenever the masses start doing the hobby, it ruins it, everytime. It's one of the reasons we have remote ID now. The hobby was growing at a decent pace organically. Once they started making it easier for new people to get involved it all went downhill. So I disagree with that opinion.
Great video BOTGRINDER! Bnf have come a long way for sure and you are correct - a lot of bnf drones have weak frames. Ideally someone should purchase a bnf and a demibot frame at the same time. When the bnf frame breaks convert components over to a real freestyle frame like the demibot💯 (I always adjust pids on bnf to my liking)
There is something over near that tower that made me failsafe this past summer first failsafe I've had with crossfire. Awesome video and definitely agree that building drones is usually more durable of a option 🤟
Pause the video when bot is approaching the tower, there are loads of antennas on top of that tower. I'd say that's why you guys failsafed there. A friend of mine once failsafed with crsf on top of a wind turbine. They got antennas on there too. Don't know what frequency those are on but they sure got loads of power.
Holy ship ! Dude you totally crack me up man.. I would like to see more of that skate dude actor, that’s some funny ship. Dig your videos , from an old Santa Cruz skater . Later man…
Your videos are the best. I use the term freestyle like a mad man. Mostly likely incorrectly. I always intend to fly something cool and then I get distracted, cruise slow and just look at stuff. #fpvfreestyle #freestylefpv
Thank you, you described these nuanced differences very well. I don't have grass where I live and I've already had a smaller "freestyle" BNF take a beating after taking one hard dirt nap. Steep learning curve to build though... It's daunting.
I build my quads but my wife bought me a bnf iflight evoque 1 year ago. For Christmas, I've been bashing 6s hard still flies like a champ. Not a fan but just do like it.
I heard you BOT... I ordered your new Demibot frame today along with the 3D prints from Brain3D. Cost me half as much again in postage but hey, that shit is worth it bro. Just got to order your motors now and sit and wait for the good times to arrive. Your the best, dude, keep up the good work...
@@BOTGRINDER no worries bro. Trying to get the motors from TBS but it won’t let me complete my order because I’m in the UK and the stupid page keeps asking me for the zip and state so I can’t go any further. I put United Kingdom in there but it still keeps asking me for this shit. So frustrating dude.
I bought a BnF GEPRC Mark 5. The build quality was questionable. There were chips in the wires that go from the vista to the FC. Those chips had been wrapped in bits of electrical tape from the factory (weird way to deal with that, just replace the wires before shipping it?). Also, I didn't have to strip my screws in the top plate because they came pre stripped. Now this thing flies like a beast. There is nothing it can't do but if I crash on a hard surface it's probably gonna snap an arm. Overall, haven't had a lot of drones but this is the best yet. Love it!
I've been flying FPV for just a few months and got my first 5inch and went with a BNF because I was a little overwhelmed about setting up all the betaflight and receiver stuff. Bought a GEPRC MK 5 and it seems pretty legit. I fucked up and got Frsky so it has fail safed twice (once on a snowy rough that I had to gorilla rescue lol) Just got ELRS so learning that now. And the Kwad is completely undamaged so we will se how it does. BNF are a lot better now and for a first FPV drone I think they serve a purpose. Definitely will build my own from now on though.
I have this frame on my 5 inch as it fits a 30x30mm HDZero VTX in the rear. Love how it flies, but the arms are a definite weak point and I've broken a couple now. Will change frame soon
Whenever I've looked at a bnf, it's with the expectation that I'd be putting its guts into another frame shortly thereafter. I don't do much Bando stuff, though. But sometimes it's somehow cheaper to get the bnf than get the parts individually. Either way my goal is to always have enough parts laying around to build a new quad or fixed wing. The bnfs are just fuel for the fire lol
I had a wizard 220 from years ago. I was like 16 and I crashed it and didn’t have the funds to repair it so it sat in a closet. Recently I got back into FPV and I slowly replaced every single part as a matter of repair. Haven’t had to do much work since. The Eachine wizard is old though, and it seems like most bnf drones these days are equipped with good hardware and come pretuned. I imagine it would’ve been far easier to get into fpv now.
Out of the 14 quads I have, half are BNF. Some are better than others. The best one I have is the T-Motor FT5. Literally one of my favorite quads next to my Armattan Marmotte (also BNF)
Good video like what you do Your frames are the best the strongest And if you want to grow as an ftv pilot you will Need a strong durable bando bashing frame
I want one of these frames, for long range mountain cruising this little boi would be pretty ideal. why don't more manufactures use colored carbon fiber like this frame? it looks pretty cool.
Some of us don't have office parks or bandos where we could fly. It seems a very metro-centric viewpoint. You make due with what you have. If that's bandos, great. If that's parks fine. If that's a country gravel road with wheat fields on either side and a lone, overgrown tree, you make due. As you said, Freestyle is Freestyle. I mean, Bardwell is a respected Freestyler and he mainly flies around his farm. We make due with what we got. Finally, not every session needs to be a full-send. Sometimes it is nice to just cruise.
@@BOTGRINDER - Understood, it just wasn't clear in the video, hence my response. I'm a city flyer myself but we don't have any bandos to fly in since the old buildings are either deep inside the city and boarded up (and are along main roads where bored cops roam), or are torn down rather quickly and something else built in their place. Construction sites are almost always gated off with private security patrolling and people are always calling the cops the moment you try to fly there. Office Parks are extremely tiny or have private security always roaming around. We want to freestyle but we only really have parks to fly in, so even if we are in an urban setting we just have to use what we have.
Hey bot, i know you're not really into the whole technical side of fpv. But i have a question, I've been trying to set up my vtx in betaflight and it hasn't been working, i was like "...wtf" and decided to open up the drone and replug the USB... Turns out my vtx doesn't power up from usb. Is that normal?
@@BOTGRINDER I meant when I plug in the flight controller, the vtx doesn't power up. It turns out I needed a battery. I thought my vtx was dead even though the drones brand new
The I flight tune is off the chain. You gotta change that taste. I the nazgul is murderous... even though it's quite heavy. I mode it a bit. Maybe like a camera or vtx change or antenna change. But bnf are getting crazy good.
I have the foxeer aura 5 I use it more for cinematic cruising and open park/ tree freestyle, if I go bando bashing I take a rebel graffiti 5 which is a legit flying brick
Ill add I think BNF long range quads are good. Here is an example the Iflight Titan or even GEprc Crocodile. Yes it has the DJI Digital because I like digital. Anyway the titan and the croc have been reliable frames that can handle crashing into large boulders/mountain rocks and such. Its not hardcore freestyle but if you really want to "go and go" then these two quads and many others are worth a look. Just my 2 cents worth
Funny how Botgrinder gives us links for a "shitty" freestyle quad. I have bought 3 Freestyle Quads and built 2 on my own and I never had a problem like "The receiver stopped working" or "the screws striped". I think it has to do with the very negative opinion Botgrinder has towards bnf's P.S. It's Delaware
I would never fly if it wasn’t for BNF. As you said, not everyone has the time or necessity for the absolute best and most resilient. Imagine if everyone who wanted to drive a car had to build their own.
I had my friend tattoo shit on my knuckles too lol. We did it in the front room of my trailer. Best way to get finger tats besides the joint lol. Mine look like crap, the "LL's" are fading, and they're my fucking favorite.
Yeah I agree 2 years ago I bought a nazgul 5inch and it broke so much, I still have it (technically) but literally every part aside from the camera has been swapped to something else
Energy all goes somewhere. I'd rather snap a $7 arm than trash the motor on the end of it...love your brutal honesty....too many "yes men" in this shiny-new-toy hobby. Keep bashin' that which needs to be bashed!
Bro, I have ordered your new demibot frame, 3D print kit but I can’t get your V4 motors anywhere. TBS have them but I can’t order them due to the stupid Zip/state on the delivery address section. We don’t have these in the UK. Help bro I really need a set of these motors. You rock dude.
@@BOTGRINDER I’ll give it a go bud. I did check quite a few but they don’t stock them. I found one that has the V2 and sent them an email. Hopefully I will get a response soon. Stay safe bro.
Only but on the Demi bot, its a few buck cheaper if you select the parts individually. Make the whole drone cheaper or the spare parts more expensive. XD
@@BOTGRINDER $42.36 shipping And still have to pay import tax on it. Total of 160,14 smackeroos. It might as well come in golden condom-wrapped because USA drone purchases bend me right over XD. She better rips, i'll trust she does. but Anyhuwww on it's way to me!
Read my mind... need a good parts list for a demibot build... I fly with frsky transmitter since I never graduated since I don't know crap about building... time to take off the training wheels...
This bnf flew great!: bit.ly/3UFbrNW
My "hardcore fpv" build bit.ly/3Grz9sF
Lets build a drone park fpvpark.com
Holiday sweater!: bit.ly/3EL2sF4
Botgrinder frame! bit.ly/3xMo8go
Botgrinder motors! bit.ly/3z05EZD
You know you did not pin your comment right
@@loen9591 lol good looks
The 2nd link doesn’t work
Hey Bot, i enjoy watching your videos a lot. I've stopped watching the other pilots because they are all the same somehow, but you come up with another interesting topic every time and i think that's absolute awesome. Keep doing what makes you happy my friend
Hey thanks for watchin!
@BOTGRINDER hey did you ever get anyone with that fart spray? 😂😂😂
been flying the iflight nazgul 5 and it's been extremely durable on bando bashing but my next frame is 100% going to be the demibot. I love the design and out of all the fpv guys out there you're channel has the best content 🙌🙌
Me to on the nazgul, I so wish it didn't have those light channels on the arms. Looks cool, but I broke two arms where the screw goes through the arm and the channel sort of splits there also. Like maybe it would hold off that channel wasn't there?
To be fair, I failsafed twice at about 300 feet onto concrete. So I don't know if all arms would break on all drones. Maybe they would. But it flys great
Dude i just found your channel randomly and you are like my favorite FPV channel now! You made hitting gaps easy 😂
haha thanks for watchin! i put out a new video every saturday!
Foxeer definitely did a great job, and so did you 😉
Haha thanks bro
"i figure we don't bother anyone" reverse phycology on the man 😂😂
Lmao the roast on bardwell 😂😂😂
Bought my Roma F5 almost 2 years ago. Love it still.
Edit:
There are lots of reasons people go BNF. Low stock on parts, long shipping times. They're in a hurry to get started. Don't "want" to solder, or just don't have time.
THANK YOU, my Roma F5 was and still is my absolute favorite frame, bought the BNF 2 years ago like you and it's still solid
Much respect, started with one idea and changed his mind. This is why I support
Not afraid to change my mind when presented with information lol
i literally have 0 problems with my iflight nazgul, its also super easy to work on and upgrade. good to learn tuning on. I have crashed the shit out of it, and only broken props. I literally don't see any problems with bind and flies, other than the fact that they might have wonky tunes from the factory.
edit: price also, maybe a few years ago before covid you could source parts for a really good freestyle build, relatively cheap, but you cant do that anymore. I had multiple wish lists and shopping carts with different builds, and I never committed because its cheaper to purchase a bind and fly, and just upgrade as stuff breaks. Using the nazgul as an example, i purchased it for 200 on banggood, even after shipping it was cheaper than buying all of the parts and putting it together myself. Decent stacks are at least $70-100, 4 motors and a spare is at least $60-80 dollars, then add a $20-50 frame, 800mw vtx, Decent good quality camera, receiver, a couple sets of props, thats at least $250, and thats for cheap parts.
The problem is Botgrinder doesn't sell bind n fly's.
yeah nazguls are sick the stock vtx is garbage but apart from that they are solid fucken quads
The Nazgul frame (both the F5X and the F5D), just like the BotGrinder frame, has 6mm arms held together by 3mm plates. While Foxeer do not give full specs for their frame, judging by the weight, is seems like a very lightweight frame and therefore the carbon used for the arms and plates must be quite a bit thinner? I have tons of time for Doug, but on this one, he does not get my vote as he chose a single B'nF quad and drew generalised assumptions about all.
Foxeer is knocking it out the park. Their racer is my build - the frame. I am so close to just get their Caesar and stop building. Good times.
Epic video, bot. The part about alcoholics or if you have the shakes killed me 😂😂😂.
I’m building this frame right now and it is solid! I have no regrets paying top dollar to get top quality thanks Bot❤
Funny AF. I love how you tell it like it is. Great vid
You're right it is a lot to getting into hobbies, and no one talks about the extras you need, batteries, battery chargers, soldering gun, special tools, taps, solder, zip ties, nuts bolts spare parts to repair frames, on and on. although the Grinderino hasn't broke frame parts yet, i am trying 😊 did take out camera, why do they put square corners on square brick buildings? Plus software, electronic replacement parts, radios goggles. All you see is the drone flown by people who rarely crash, at least in the videos, rearly do I go out to fly 5 packs and come back without broken drone (s). But it is so wild, worth every penny, fun as hell no matter how old you get, started at 67 and wonder why the F*$#@ I wastent involve before. Your videos are real and i enjoy them. I am to old to get as good as you, but fun as hell trying……
Sounds like we need a BOTGRINDER bind and fly freestyle drone....hint hint...you should, show them how it should be done!
Dude is hella good at calling me a total dork - Really really respectfully.
haha we are all dorks some of us just have nice shoes.
7:19 when Bot literally jumps with surprise at @IzzyBoop - lmfao
yo bot grinder, i am a friend of gelato fpv, whats up buddy, we are almost neibors, im in nwi, anyway like the vids and thanks bro!!!!!
Your input maybe the most important for bnf freestyle quads! Most Real Drone User, keep bashing the bands!
Interesting and fun video review of bnf "freestyle" drones, well one bnf. Apparently there's quite a few "pilots" that really like the Nazgul, see if iflight will send you one to rip. I love to build my own, but these days I can see people buying a bnf to get going. Or they don't have time to build or want to. They are so much better than those made just a few years ago. Happy ripping everyone. 👍💖😎
This hobby can't grow without new people
Really? 🤔
Whenever the masses start doing the hobby, it ruins it, everytime. It's one of the reasons we have remote ID now.
The hobby was growing at a decent pace organically. Once they started making it easier for new people to get involved it all went downhill.
So I disagree with that opinion.
@3:31 I was in a other room and I just heard "suck butt" lol 😆
10:37 that's one f!cking cool Ken.. thanks Ken for giving the world a good attitude
Great video BOTGRINDER! Bnf have come a long way for sure and you are correct - a lot of bnf drones have weak frames. Ideally someone should purchase a bnf and a demibot frame at the same time. When the bnf frame breaks convert components over to a real freestyle frame like the demibot💯
(I always adjust pids on bnf to my liking)
There is something over near that tower that made me failsafe this past summer first failsafe I've had with crossfire. Awesome video and definitely agree that building drones is usually more durable of a option 🤟
Pause the video when bot is approaching the tower, there are loads of antennas on top of that tower. I'd say that's why you guys failsafed there.
A friend of mine once failsafed with crsf on top of a wind turbine. They got antennas on there too. Don't know what frequency those are on but they sure got loads of power.
@@GuruGoesUTube yeah for sure I'm lucky I didn't failsafe more than once because I dove that building multiple times lol 😆
Holy ship ! Dude you totally crack me up man.. I would like to see more of that skate dude actor, that’s some funny ship. Dig your videos , from an old Santa Cruz skater . Later man…
Ey man thanks for watching!
Your videos are the best. I use the term freestyle like a mad man. Mostly likely incorrectly. I always intend to fly something cool and then I get distracted, cruise slow and just look at stuff. #fpvfreestyle #freestylefpv
00:53 I was not ready for that 😂
i have a sector D5. I have had some hard smacks. no bends, breaks, no broken motors etc... thani god lol. Love it
awesome!
Thank you, you described these nuanced differences very well. I don't have grass where I live and I've already had a smaller "freestyle" BNF take a beating after taking one hard dirt nap. Steep learning curve to build though... It's daunting.
Aint gonna lie, I fk love this channel! I think ive watched this video 5 times, just hear him say "Fuck DJI"
I build my quads but my wife bought me a bnf iflight evoque 1 year ago. For Christmas, I've been bashing 6s hard still flies like a champ. Not a fan but just do like it.
i dont understand that last sentence.
@@Holdenmagroyn he's not a fan but he just do like it
@BOTGRINDER Question: Could you not curse for 24 hours?
I knew Mike V. years ago. Ray Barbie introduced me to him. I love that deck!
Bro thats awesome
I heard you BOT... I ordered your new Demibot frame today along with the 3D prints from Brain3D. Cost me half as much again in postage but hey, that shit is worth it bro. Just got to order your motors now and sit and wait for the good times to arrive. Your the best, dude, keep up the good work...
Eyyy monkey! Thank you bro!
@@BOTGRINDER no worries bro. Trying to get the motors from TBS but it won’t let me complete my order because I’m in the UK and the stupid page keeps asking me for the zip and state so I can’t go any further. I put United Kingdom in there but it still keeps asking me for this shit. So frustrating dude.
I’m dying here 🤣🤣🤣 people who can’t solder, alcoholics,… Almost pee’d myself 🤣
I really appreciate your honesty lol
"Alcoholics " you killing me son. You're so Philly.
Bro the fucking opening shot had me dead 🤣🤣
I bought a BnF GEPRC Mark 5. The build quality was questionable. There were chips in the wires that go from the vista to the FC. Those chips had been wrapped in bits of electrical tape from the factory (weird way to deal with that, just replace the wires before shipping it?). Also, I didn't have to strip my screws in the top plate because they came pre stripped.
Now this thing flies like a beast. There is nothing it can't do but if I crash on a hard surface it's probably gonna snap an arm. Overall, haven't had a lot of drones but this is the best yet. Love it!
I've been flying FPV for just a few months and got my first 5inch and went with a BNF because I was a little overwhelmed about setting up all the betaflight and receiver stuff. Bought a GEPRC MK 5 and it seems pretty legit. I fucked up and got Frsky so it has fail safed twice (once on a snowy rough that I had to gorilla rescue lol) Just got ELRS so learning that now. And the Kwad is completely undamaged so we will se how it does. BNF are a lot better now and for a first FPV drone I think they serve a purpose. Definitely will build my own from now on though.
Havent broken anything on my demibot yet 👌👌
botgrinder, no fucks were given in the making of this video. excellent!
@botgrinder I know your sponsored by foxeer but you should have tried the iflight nazgul5 v2 bnf things way stronger looking then the foxeer
I dont think if iflight wants to send me one, I'll totally make a video on it if they do.
I have this frame on my 5 inch as it fits a 30x30mm HDZero VTX in the rear. Love how it flies, but the arms are a definite weak point and I've broken a couple now. Will change frame soon
ZMR250 for the win!
You rock brother love your channel
11:19 Lt Dangle reporting for duty!
hahahhaha the DJI comment is the best :-) you really have a thing for DJI 😛
you sahred perfect , see ya!,)
This guy might be telling the truth when he says he ate a sandwich off the ground. Love you Bot!
thanks bot. it was gud. 10/10
Whenever I've looked at a bnf, it's with the expectation that I'd be putting its guts into another frame shortly thereafter. I don't do much Bando stuff, though. But sometimes it's somehow cheaper to get the bnf than get the parts individually.
Either way my goal is to always have enough parts laying around to build a new quad or fixed wing. The bnfs are just fuel for the fire lol
Great point haha as this is what I do with my Micros.
@BOTGRINDER What’s your opinion on the Nazgul from iFlight? Isn’t that a proper freestyler?
I had a wizard 220 from years ago. I was like 16 and I crashed it and didn’t have the funds to repair it so it sat in a closet. Recently I got back into FPV and I slowly replaced every single part as a matter of repair. Haven’t had to do much work since. The Eachine wizard is old though, and it seems like most bnf drones these days are equipped with good hardware and come pretuned. I imagine it would’ve been far easier to get into fpv now.
I'm liking that Tee!
On Spot dawgs! May all have a kiss on the forehead tonight...........")))
Out of the 14 quads I have, half are BNF. Some are better than others. The best one I have is the T-Motor FT5. Literally one of my favorite quads next to my Armattan Marmotte (also BNF)
thats alot of quads
@@BOTGRINDER Many different sizes from mobula 6, to 7"
Not all of us "bando",I live in the country near small town,zero to fly,its all woods trees n parks
Haha. Comin' at JB... well deserved!
But honesty frames are the cheapest part of a drone. I'm down to break one. Makes me try a new frame more often.
Good video like what you do Your frames are the best the strongest And if you want to grow as an ftv pilot you will Need a strong durable bando bashing frame
Looks to me like you need w.e that cam angle is on the demi. Smooooth even on dvr
Awesome review bro
Really enjoy your content thumbs up bud
Nice vid! And I had no interest in the Caddx walnut rip off camera lol 😂
I have a bind and fly TanQ, so far it held up OK, it vill level the bando before breaking, do you think it's soft?
I want one of these frames, for long range mountain cruising this little boi would be pretty ideal.
why don't more manufactures use colored carbon fiber like this frame? it looks pretty cool.
Some of us don't have office parks or bandos where we could fly. It seems a very metro-centric viewpoint.
You make due with what you have. If that's bandos, great. If that's parks fine. If that's a country gravel road with wheat fields on either side and a lone, overgrown tree, you make due. As you said, Freestyle is Freestyle. I mean, Bardwell is a respected Freestyler and he mainly flies around his farm. We make due with what we got.
Finally, not every session needs to be a full-send. Sometimes it is nice to just cruise.
all great points! but in this video im talking specifically about urban flying this one doesn't apply to a rural setting.
@@BOTGRINDER - Understood, it just wasn't clear in the video, hence my response.
I'm a city flyer myself but we don't have any bandos to fly in since the old buildings are either deep inside the city and boarded up (and are along main roads where bored cops roam), or are torn down rather quickly and something else built in their place.
Construction sites are almost always gated off with private security patrolling and people are always calling the cops the moment you try to fly there.
Office Parks are extremely tiny or have private security always roaming around. We want to freestyle but we only really have parks to fly in, so even if we are in an urban setting we just have to use what we have.
Brah you have your own frame out ? I thought I seent a feller flying a botgrinder if so I needs lol keep shredding brah
yea the demibot!
bnf's are fine dude i loved my nazgul lasted ages too
Damn. Calling out alcoholics for not being able to solder. 😂
Hey bot, i know you're not really into the whole technical side of fpv. But i have a question, I've been trying to set up my vtx in betaflight and it hasn't been working, i was like "...wtf" and decided to open up the drone and replug the USB... Turns out my vtx doesn't power up from usb. Is that normal?
Your vtx has a usb port? ive never seen that before.
@@BOTGRINDER I meant when I plug in the flight controller, the vtx doesn't power up. It turns out I needed a battery. I thought my vtx was dead even though the drones brand new
@@adamvaughan123 ohh ok haha, yeah the vtx power should be soldered onto you xt60 pads so usb wont power it.
Just wondering Bot, have you flown the Apex frame from ImpulseRC?
No i have been making and selling my own frames for like 4 years now? so i never had a chance to, i hear good things though!
Right just curious.. great frames. Been following your antics for 6-7yrs now I reckon!
The I flight tune is off the chain. You gotta change that taste. I the nazgul is murderous... even though it's quite heavy. I mode it a bit. Maybe like a camera or vtx change or antenna change. But bnf are getting crazy good.
I have the foxeer aura 5 I use it more for cinematic cruising and open park/ tree freestyle, if I go bando bashing I take a rebel graffiti 5 which is a legit flying brick
Having a durable frame also gives you the confidence to hit some spicy gaps without worrying about crashing and breaking your gear every pack.
Ill add I think BNF long range quads are good. Here is an example the Iflight Titan or even GEprc Crocodile. Yes it has the DJI Digital because I like digital. Anyway the titan and the croc have been reliable frames that can handle crashing into large boulders/mountain rocks and such. Its not hardcore freestyle but if you really want to "go and go" then these two quads and many others are worth a look. Just my 2 cents worth
Oh 100% lr quads are exempt from my opinion in this video.
Funny how Botgrinder gives us links for a "shitty" freestyle quad. I have bought 3 Freestyle Quads and built 2 on my own and I never had a problem like "The receiver stopped working" or "the screws striped". I think it has to do with the very negative opinion Botgrinder has towards bnf's
P.S. It's Delaware
Man will you make a BotGrinder hardcore freestyle bnf drone and end the dispute lol!!!
Is the spot your flying off of concord pike in Delaware ? .
I would never fly if it wasn’t for BNF. As you said, not everyone has the time or necessity for the absolute best and most resilient. Imagine if everyone who wanted to drive a car had to build their own.
The world would be a much better place, we would have high speed rail and bike lanes. I'm about it.
@@BOTGRINDER I’d be walking everywhere 😂
hi Bot great video mon
I had my friend tattoo shit on my knuckles too lol. We did it in the front room of my trailer. Best way to get finger tats besides the joint lol. Mine look like crap, the "LL's" are fading, and they're my fucking favorite.
i have an iflight nazgul5 v2 4s and i turned it to 6s didn't give me problems yet. but im only 8 months in fpv tho.
my roma f5 is legit man. been flying it for a few years
Brilliant as always 👌 👏 👍
Preach 🙌
Yeah I agree 2 years ago I bought a nazgul 5inch and it broke so much, I still have it (technically) but literally every part aside from the camera has been swapped to something else
Man I have been having really good luck with my Walnut, Have you done the latest firmware update?
I know! I been seeing your videos 😆, yeah this is on the newest firmware. .
@@BOTGRINDER Hmm I have not tried the internal stabilization or auto settings yet. You know I overproduce my crap... Thanks for wathching.
Yeah I broke like an arm a week flying the jb qav s, it rips the most though. But weak.
I think I agree completely with what you say.
Build em like a tank! Bnf's are not tanks
Mine is.
🤷
Energy all goes somewhere. I'd rather snap a $7 arm than trash the motor on the end of it...love your brutal honesty....too many "yes men" in this shiny-new-toy hobby. Keep bashin' that which needs to be bashed!
How about a real world comparison between yours and a source one, big difference in price? By the way I have both including OG bot 5 ,5s
Bro, I have ordered your new demibot frame, 3D print kit but I can’t get your V4 motors anywhere. TBS have them but I can’t order them due to the stupid Zip/state on the delivery address section. We don’t have these in the UK. Help bro I really need a set of these motors. You rock dude.
There should be some uk vendors that sell them if not ask one of your local spot to place an order!
@@BOTGRINDER I’ll give it a go bud. I did check quite a few but they don’t stock them. I found one that has the V2 and sent them an email. Hopefully I will get a response soon. Stay safe bro.
another banger video. :D
Sick.
"Fuck DJI" - best words ever said. :D
Only but on the Demi bot, its a few buck cheaper if you select the parts individually. Make the whole drone cheaper or the spare parts more expensive. XD
Haha trying to make replacements cheap.
@@BOTGRINDER $42.36 shipping And still have to pay import tax on it. Total of 160,14 smackeroos. It might as well come in golden condom-wrapped because USA drone purchases bend me right over XD. She better rips, i'll trust she does. but Anyhuwww on it's way to me!
Read my mind... need a good parts list for a demibot build... I fly with frsky transmitter since I never graduated since I don't know crap about building... time to take off the training wheels...
Heres my build all in one place! bit.ly/3gmIZRY