No clue what was in there grass grenade was an amazing color tho idk if you put swirls in their reply if you did because then I can tell you what looked best
Ok I saw it when it was melting swamp swirl puck because I said on a live stream for you to do that color match and you did and I freaked out because I was so happy
You mentioned that the colors didnt fully mix on that one. It would be cool if you did a video melting down very different colors but not stirring them and trying to make some crazy patterns. Great vid as always.
I spent most of the day doing the same! Never tried it until a couple months ago after watching your videos. Now I’m about 13 molds in and wanting more! Thank you Chris!!
I think my favorite was the beaver bait with the red swirl in it. I would really like to have seen you put more of that blue color powder in it because I think what you were going for would have been beautiful.
You should do a video on making baits for your personal tackle box. Let’s say you dont own a single lure. You have to make all the baits that you would want to use. And then you have to go catch fish with them. Basically you make your favorite baits in your favorite colors and go catch fish with them.
Next time you have lots of pucks, I think it would be fun to do all cool colors together and all warm colors together to see what you get. So red, orange, yellow, golds And purple, blue, green, white or highlight?
Your skills with color depth, fading and mixing has gotten insane. You should try this, but do only bright colors. Leave out blacks, pumpkins, dark purples. Not sure if you've done that before. And as a father, giving up the pacifier can be a pain. But he looks like he's going to be ok. My wife says every time how adorable he is.
Hello from Germany! I like the grass grenade the most. Wow is it melting down without vacuum chamber, are there bubbles? In the past I had a small melting pot but the lid of my vacuum chamber fit perfect on it. Does Your vacuum chamber lid fit on the Presto Pot? Did You try this? If it fits You can de-gas a huge amount of plastic at the same moment. But You have to careful not to pump to fast that it don´t overfill or overrun. One of my favorite colurs in my baits are the "remelting greens" with medium black and a lot of small green glitter flakes. Same like Kenny These are the video we want the most. MfG Stefan
Definitely the stick worms and grass grenades. The red in the grass grenades were awesome. I was actually thinking when you mixed it up what if you didn't mix to much and have some weird coloring. All look good
Loved the grass grenade esp because the colors didn't fully mix. Would like to see you do a re-melt video without fully stirring the colors. Would the molds fill with random color swirls?
@@WorldsWorstFishing watching your vids got me into hand pouring. Picked up the AI 6 inch and ordered the 4 inch hand pours. If you message me on FB (Texas Veteran Fishing) ill send you some pics that you inspired me to pour.
Grenades FTW my friend... Well, as my personal favorite at least. They are all pretty sweet though. Keep 'em coming post front! I'll be pouring soon. Got the goods, just need to set up my station. You have been an inspiration for me to get in the self pour game. Thanks again, Chris.
yes I did watch your remelt video, I was wondering if it were possible and was the reason for my search. Waste not right! I think you do an excellent job with your how to videos. And I'm looking forward to my hobby adventure both in the boat and in the shop again thanks for your videos
Who do you go to for molds ? I have a idea in my head on a worm design I want made . They say the wheel can only be reinvented so many times but I have a crazy idea and want to see if it’d work.
nice color, hard to have a favorite. save up all those white plugs and do some creative pours with other remelts using different techniques and make it pretty and some dirty casts of all remelted white bet they wont be too bad
@@WorldsWorstFishing sweet thanks Chris!! I'll get one tomorrow!😁 You're awesome and I enjoy your videos, I believe we all learn so much. Thanks for everything and for posting!
The ecto craw and grenade I really liked keep the videos coming enjoy everyone learning each time I watch good luck with the storm can't wait until the next video
Have you ever used alumisol? I’m using it right now because dead on plastics is sold out. It goes through a gel phase before it turns liquid again. Pretty weird. Final product is killer though.
Chris, talk about putting lipstick on a pig. I am amazed how well that came together, granted the number of colors that all got to know each other in the meltdown. My favorite were the grass grenades, love that mold. Keep up the awesome videos.
I noticed that while shooting,,at times you'll let go of the injector with your left hand while holding pressure with the right,that you'll put your left hand on the mold/s,,are you trying to feel the heat to know that liquid is making it's way or what ?
Dude I was in Panama City beach and we left just in time they had tornadoes, water spouts and flooding! My cousins block was hit but they’re safe and good! It was wild and crazy to think you filmed on the way home that badas dude🤙🏼
@@WorldsWorstFishing I totally understand but I have to admit this color mix is amazing!! You really have an incredible talent for mixing these colors and making these baits, I have enjoyed watching your channel look forward to seeing some more! :)
Maybe next time you re melt all your old plastics add a little plastisol to lighten it up so it’s not such a dark green. A lighter hue would probably look cool.
I know I'm late to comment, but this color would look really good in a lizard. Correct me if I'm wrong, but I don't think I've seen you do a lizard mold before. Might be something new/different for the future.
This is the video I wanted.
Hell yeah
Same
The video we needed
Literally asked for this for like 9 months before you did it the first time. Now a second one! Keep it going!
🙌
Which baits turned out best???
Grass grenade look best in my opinion
@@Jaime-qd8cr 🙏🙏
No clue what was in there grass grenade was an amazing color tho idk if you put swirls in their reply if you did because then I can tell you what looked best
Ecto Craw is my favorite.
Ok I saw it when it was melting swamp swirl puck because I said on a live stream for you to do that color match and you did and I freaked out because I was so happy
That color in a swim frog would be awesome. That craw is sweet, my pick for the batch.
You mentioned that the colors didnt fully mix on that one. It would be cool if you did a video melting down very different colors but not stirring them and trying to make some crazy patterns. Great vid as always.
What happens is as the plastic stays warm in the pot they thermally mix, I don't think I would have much success although I like the idea
@@WorldsWorstFishing you're the expert. No worries.
Love the crawls!
Let's Go!! Another recycling!!!
Yessir
🔥 video bud thanks. That was a nasty storm here in northeast Florida
I love the ecto craw and the punch bug
Would love to see your take on some beetle baits, they are popular in south louisiana
Hmmmm...
I spent most of the day doing the same! Never tried it until a couple months ago after watching your videos. Now I’m about 13 molds in and wanting more! Thank you Chris!!
Hell yeah
I think my favorite was the beaver bait with the red swirl in it. I would really like to have seen you put more of that blue color powder in it because I think what you were going for would have been beautiful.
You should do a video on making baits for your personal tackle box. Let’s say you dont own a single lure. You have to make all the baits that you would want to use. And then you have to go catch fish with them. Basically you make your favorite baits in your favorite colors and go catch fish with them.
Noted!
came here form Marling and Debos channels. awesome baits. been thinking about getting into hand pouring.
You continue to make great looking baits, even out of your leftover plastic! Great job.
🙌🙌
Next time you have lots of pucks, I think it would be fun to do all cool colors together and all warm colors together to see what you get.
So red, orange, yellow, golds
And purple, blue, green, white or highlight?
So good. I have started keeping my old plastics to one day do this with mine as well! Thank you for sharing.
Yeah it's a good way to recycle things and it is a really fun time
Doo you heat up all molds before injecting?
That was great. I like the stick-worms best.
I was wondering if you would ever sort the colors and do a double or tripple inject with what you have?
Sounds fun
do you heat your molds up before placing them on the clamp?? 😯
Absolutely love these remelt videos keep them coming
Thanks raymond
Do you have any idea when you'll get more baits in stock on your site?
If you stir all that, won’t you just get brown? It seems a waste, but you are doing it for us, so thanks for that Chris! You’re a real pro.
Love your videos ,what Dead on plastics can and cannot be remelted ,im new to this but would love to start just as a hobby to have fun with my Sons.
Your skills with color depth, fading and mixing has gotten insane. You should try this, but do only bright colors. Leave out blacks, pumpkins, dark purples. Not sure if you've done that before.
And as a father, giving up the pacifier can be a pain. But he looks like he's going to be ok. My wife says every time how adorable he is.
Haha thank you so much man, and Landon is a handsome young fellow
Hello from Germany!
I like the grass grenade the most.
Wow is it melting down without vacuum chamber, are there bubbles?
In the past I had a small melting pot but the lid of my vacuum chamber fit perfect on it.
Does Your vacuum chamber lid fit on the Presto Pot?
Did You try this?
If it fits You can de-gas a huge amount of plastic at the same moment.
But You have to careful not to pump to fast that it don´t overfill or overrun.
One of my favorite colurs in my baits are the "remelting greens" with medium black and a lot of small green glitter flakes.
Same like Kenny These are the video we want the most.
MfG
Stefan
Sorry How not Wow
Are you using a deep fryer?
These are probably my favourite videos that you make. Great stuff 👍🏻
Thanks buddy
Try doing a remelt of all your colors with as little stirring as possible to see what colors you get.
Awesome tray of goodies. The stick worms was my favorite.
Me too
Nice! Like the grass granades and the classic stick worm....
Yeah the stick worm really looked good
These vids are so satisfying
Definitely the stick worms and grass grenades. The red in the grass grenades were awesome. I was actually thinking when you mixed it up what if you didn't mix to much and have some weird coloring. All look good
That would be cool!
Either the ectocraw or the jointed swim baits
I too think some intentional repeating would be cool. Color matching from pucks and plugs.
How can I get a back of the grass grenades, and the craw?
Yea super bad storm in florida since i live here of course but the wind was blowing super hard
Loved the grass grenade esp because the colors didn't fully mix. Would like to see you do a re-melt video without fully stirring the colors. Would the molds fill with random color swirls?
Maybe at first but as the plastic reaches temp it thermally mixes
Where do you get all your stuff
Question for you... Recycled some plastic for stick baits, and added too much softener. Whats the best way to firm it back up?
You'll have to mix in firmer Plastic or add hardener
@@WorldsWorstFishing dont have hardner, so swimbait blend it is, lol. Appreciate it. Love the content also.
@@WorldsWorstFishing watching your vids got me into hand pouring. Picked up the AI 6 inch and ordered the 4 inch hand pours. If you message me on FB (Texas Veteran Fishing) ill send you some pics that you inspired me to pour.
Grenades FTW my friend... Well, as my personal favorite at least. They are all pretty sweet though. Keep 'em coming post front! I'll be pouring soon. Got the goods, just need to set up my station. You have been an inspiration for me to get in the self pour game. Thanks again, Chris.
So awesome to hear
yes I did watch your remelt video, I was wondering if it were possible and was the reason for my search. Waste not right! I think you do an excellent job with your how to videos. And I'm looking forward to my hobby adventure both in the boat and in the shop again thanks for your videos
My pleasure
I like the grenades. Great video
What kind of fan do u use
Have you ever done a run of baits with swirling by putting 2 colors in 1 injector? and if you have have you had good results?
Oh yes I did a video well over a year ago how to get cool effects with a single injector like that
Do those soft swimbaits even work good
I didn't realize you were a local! super cool!
Tallahappy
@@WorldsWorstFishing So, can I buy locally from you? I'd rather support you than zoom or whoever.
Just goes to show.. you cook up scraps and still come out perfect.. all good probs finnese worm for me though.. another awesome video mr jones..
🙏🙏🙏
Great color. Swim bait would be my favorite
🙏
Perfect I’m recycling as well at the moment making baits
Sweet
What temperature do you heat the material to aprroximately?
About 340
yo Chris it was an honor going live with you tonight.
🙌🙌🙌
They all turned out good but I liked the stick worms the best
Yessir
I live in Michigan, that color in a tube jig would be Awesome!
Love me some tubes
I like that color, my favorite is the craw and punchbug
🙌
I really like the style of the Punch Bugs - look like Crawfish.
Been awhile since I have seen your videos (sorry Sir). That Plastisol howitzer is amazing and the air clamp is an awesome addition to the Band!!
Welcome back!!
Presto fryar or crockpot?
Where can I buy your baits at
Hey how much would that whole amount of lures cost
You are killing it my guy !
Thank you sir
Who do you go to for molds ? I have a idea in my head on a worm design I want made . They say the wheel can only be reinvented so many times but I have a crazy idea and want to see if it’d work.
@@ksucat00 I like ai molds but he doesn't do custom work..chris Hampton on facebook does however
Appreciate the video Sensei! Yeah you had it right BTS MOLDS calls it the Flatworm they have it in 6.5", 7.25" & 8"
Nice 👍👍👍
Perfect video to watch while I clean out the tackle box for spring 😂
Haha nice
Nice With all that from "Scraps " !!! ektocraw ! lookin raw and the left type of crawfish ! . /Paul Roger Nilsson -North Sweden
Where can i get the 5” mold in the beginning of the video?
Angling AI molds
Baits look great i like the punch craw
🙌
WHere do you get your molds from?
Can someone pls tell me where he gets his molds
I get a lot of molds from angling AI molds
@@WorldsWorstFishing thank you
Those punch bugs look great!
Thank you
nice color, hard to have a favorite.
save up all those white plugs and do some creative pours with other remelts using different techniques and make it pretty
and some dirty casts of all remelted white
bet they wont be too bad
Cool cool video!! Awesome making waste into profit! Where or what kind of melting pot is that?? I want one or two. Thanks
Just a $20 presto cooking pot at Walmart
@@WorldsWorstFishing sweet thanks Chris!! I'll get one tomorrow!😁 You're awesome and I enjoy your videos, I believe we all learn so much. Thanks for everything and for posting!
The ecto craw and grenade I really liked keep the videos coming enjoy everyone learning each time I watch good luck with the storm can't wait until the next video
Thank you Travis
Where u buy ur molds
Have you ever used alumisol? I’m using it right now because dead on plastics is sold out. It goes through a gel phase before it turns liquid again. Pretty weird. Final product is killer though.
Every plastic has to go through a gel phase before it reaches conversion
The recycling videos are always great!
Thank you
@@WorldsWorstFishing thank you for the reply, I hope the storm wasnt too bad :)
Tips for soft plastic making without vacuum chamber?
Hard to say...bubbles can be tricky to solve in each case
@@WorldsWorstFishing just as a beginner do u mix, heat, stir 3x to the 350 then let bubbles air out then stir and heat one more time then inject?
Chris, talk about putting lipstick on a pig. I am amazed how well that came together, granted the number of colors that all got to know each other in the meltdown. My favorite were the grass grenades, love that mold. Keep up the awesome videos.
Haha that's funny
I love these vids!!!! Would love to see a hyper realistic worm for the different species of worm would be a sick idea
Working on some snake hand pours right now
What happens when you subject dead on plastic to a container of tap water for a week? Just curious?
Who is the maker of your stick worm mold?
I was wondering what kind of dead on plastic I should get if I’m just starting out on making baits?also how can I order baits from you.
dead on plastix swimbait blend
@@WorldsWorstFishing thank you very much this information was very helpful.
Is there a way to buy the molds you make?
I don't make the molds, I buy them from places like angling AI molds
I noticed that while shooting,,at times you'll let go of the injector with your left hand while holding pressure with the right,that you'll put your left hand on the mold/s,,are you trying to feel the heat to know that liquid is making it's way or what ?
It's more just not needing to use my left hand the entire process, I move it out of the way just in case of accident
Dude I was in Panama City beach and we left just in time they had tornadoes, water spouts and flooding! My cousins block was hit but they’re safe and good! It was wild and crazy to think you filmed on the way home that badas dude🤙🏼
Yep I was filming this the whole time
These all look amazing but the ribbontail and the finesse worms look great to me and this color mix is awesome!! Do you sell these??
No something like this I will probably not sell
@@WorldsWorstFishing I totally understand but I have to admit this color mix is amazing!! You really have an incredible talent for mixing these colors and making these baits, I have enjoyed watching your channel look forward to seeing some more! :)
@@erichildreth7562 thank you so much
Hi, why dont you try colour matching some of gary yamamotos colours
Idk I could.i guess...I generally.dont like their colors
@@WorldsWorstFishing 😯😯😯HOW COULD YOU
Where can I buy these
I'd use those colors any day!
Punch bug looks really good.
Definitely
How can I get some of these
I want fugly baits or anything you make great job
Haha.. I'll probably give all of these away on my Instagram account
Where do you sell your baits?
I fell through my Instagram account only, I make a sales posts and it's a first gun basis
@@WorldsWorstFishing cool
Should try a light colour remelt
Maybe next time you re melt all your old plastics add a little plastisol to lighten it up so it’s not such a dark green. A lighter hue would probably look cool.
I liked the ecto-craw best
👍👍
How often do you do saltwater fishing? I’d love to see some baits for saltwater get made and fished!!
Hardly ever I get very little time to go fishing in general
@@WorldsWorstFishing hopefully you get more time!
My favorite is the custom swim bait
It's a cool bait thanks
I know I'm late to comment, but this color would look really good in a lizard. Correct me if I'm wrong, but I don't think I've seen you do a lizard mold before. Might be something new/different for the future.
Weather did look nasty. I’m in Savannah and it missed us mostly.
Yeah it was really bad in some areas
Those look awesome
🙌🙌