Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
刷机固件分享drive.google.com/file/d/18QRWB2qwfu6rFmBdC11Ig-IB8adqkJEM/view?usp=sharing
能不能让大雕更新下301W的UBOOT啊...刷了后回不到官方了
301W最新版本的官方固件，有没有办法刷openwrt?大神能不能试一下，上一次看你的视频刷黑了，还好官方帮助解决了
请教下金水，威联通301w原始固件，多wan时是叠加使用？还是怎么样的？并没看到lan指定wan或叠加选项，问客服吧，又说是随机选定。我感觉这有点不可思议
好东西，就是有点贵！玩玩可以！家用主力还是X86香！
为什么NVME硬盘能不能用后面没说》？
家里用个商用路由器，有这个必要吗？
从来没说需要在家里用企业型路由器🤣，虽然现在不少人都买UBNT在家里用
安心的做个主路由多好！其它的可以用旁的嘛
只是给需要的人一个新的选择🙃
❌QNPA⭕QNAP
字幕小哥已祭天
东西很好 但价格劝退。 有没有优惠的路由器 带10G光口的 毕竟光口便宜
没有固件玩啥
评论区置顶
還以為是QNAP….
就是威联通的,JS打错字了
BootROM - 2.03Starting CP-0 IOROM 1.07Booting from SPI NOR flash 1 (0x32)Found valid image at boot postion 0x000lNOTICE: Starting binary extensionNOTICE: SVC: DEV ID: CN913x, FREQ Mode: 0x6NOTICE: SVC: AVS work point changed from 0x2de to 0x2demv_ddr: Marvell-devel (release) (Jun 08 2022 - 17:52:54)SSCG_ENSynopsys DDR43 PHY Firmware version: A-2017.11SNPS DDR: 1D training passedSNPS DDR: 2D training passedSNPS DDR: training completeddma memcmp passmv_ddr: completed successfullyNOTICE: Cold bootNOTICE: Booting Trusted FirmwareNOTICE: BL1: v2.2(release): (Marvell-10.3.4.0-4)NOTICE: BL1: Built : 17:52:57, Jun 8 2022NOTICE: BL1: Booting BL2NOTICE: BL2: v2.2(release): (Marvell-10.3.4.0-4)NOTICE: BL2: Built : 17:52:59, Jun 8 2022NOTICE: Change the base address of AP0-CP1 to f4000000NOTICE: Change the base address of AP0-CP2 to f6000000NOTICE: SCP_BL2 contains 7 concatenated imagesNOTICE: Load image to CP1 MGNOTICE: Loading MG image from address 0x402305c Size 0xe0f0 to MG at 0xf4100000NOTICE: Load image to CP0 MGNOTICE: Loading MG image from address 0x403114c Size 0xe0f0 to MG at 0xf2100000NOTICE: Skipping MSS CP3 related imageNOTICE: Load image to CP2 MSS AP0NOTICE: Loading MSS FW from addr. 0x4040f38 Size 0x1cfc to MSS at 0xf6280000NOTICE: DoneNOTICE: Load image to CP1 MSS AP0NOTICE: Loading MSS FW from addr. 0x4042c34 Size 0x1cfc to MSS at 0xf4280000NOTICE: DoneNOTICE: Load image to CP0 MSS AP0NOTICE: Loading MSS FW from addr. 0x4044930 Size 0x1cfc to MSS at 0xf2280000NOTICE: DoneNOTICE: Load image to AP0 MSSNOTICE: Loading MSS FW from addr. 0x404662c Size 0x5400 to MSS at 0xf0580000NOTICE: DoneNOTICE: BL1: Booting BL31lNOTICE: BL31: v2.2(release): (Marvell-10.3.4.0-4)NOTICE: BL31: Built : 17:53:03, Jun 8 2022U-Boot 2019.10-10.3.4.0-11 (Jun 08 2022 - 17:52:37 +0800)Model: QHora-322SoC: cn9132-A1; AP807-B0; 3xCP115-A0Clock: CPU 2200 [MHz] DDR 1200 [MHz] FABRIC 1200 [MHz] MSS 200 [MHz]LLC Enabled (Exclusive Mode)DRAM: 4 GiBRunning in RAM - U-Boot at: 0x7fee9000 Env at: 0x7ff95cc8Comphy chip #0:Comphy-0: SATA1Comphy-1: SGMII2 3.125 GbpsComphy-2: SFI0 10.3125 GbpsComphy-3: USB3_HOST1Comphy-4: SGMII1 3.125 GbpsComphy-5: PEX2UTMI PHY 0 initialized to USB Host1Comphy chip #1:Comphy-0: IGNOREComphy-1: SGMII2 3.125 GbpsComphy-2: SFI0 10.3125 GbpsComphy-3: IGNOREComphy-4: SGMII1 3.125 GbpsComphy-5: IGNOREComphy chip #2:Comphy-0: IGNOREComphy-1: SGMII2 3.125 GbpsComphy-2: SFI0 10.3125 GbpsComphy-3: IGNOREComphy-4: SGMII1 3.125 GbpsComphy-5: IGNOREPCIE-0: Link downNAND: 0 MiBMMC: sdhci@6e0000: 0Loading Environment from SPI Flash...Bus spi@700680 CS0 address is not set correct.SF: Detected mx25l3205d with page size 256 Bytes, erase size 4 KiB, total 4 MiBOKRTC_RX8130: original reg[0x1d]:0x2cRTC_RX8130: modified reg[0x1d]:0x2cRTC_RX8130: original reg[0x1f]:0x10RTC_RX8130: modified reg[0x1f]:0x10Net: eth0: mvpp2-0 [PRIME], eth1: mvpp2-1, eth2: mvpp2-2, eth3: mvpp2-3, eth4: mvpp2-4, eth5: mvpp2-5, eth6: mvpp2-6, eth7: mvpp2-7, eth8: mvpp2-8Auto-update from TFTP: Skip auto-update, env. variable 'updatefile' not foundHit any key to stop autoboot: 0Marvell>>Marvell>>Marvell>>Marvell>>Marvell>> usb startstarting USB...CP0_GPIO_HIGH_CONTROL_CLEAR_REG = 0xf244016cCP0_GPIO_HIGH_DATA_OUT_SET_REG = 0xf2440170Bus usb3@510000: Register 2000120 NbrPorts 2Starting the controllerUSB XHCI 1.00scanning bus usb3@510000 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) foundMarvell>> usb treeUSB device tree: 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Mass Storage (480 Mb/s, 100mA) USB Disk 2.0 9207076712248904412Marvell>> fatload usb 0:1 0x6500000 initramfs-kernel.bin95580168 bytes read in 6857 ms (13.3 MiB/s)Marvell>> fatload usb 0:1 0x6000000 qnap-322.dtb48791 bytes read in 34 ms (1.4 MiB/s)Marvell>> booti 0x6500000 - 0x6000000ERROR: Did not find a cmdline Flattened Device TreeStarting kernel ...
刷机固件分享drive.google.com/file/d/18QRWB2qwfu6rFmBdC11Ig-IB8adqkJEM/view?usp=sharing
能不能让大雕更新下301W的UBOOT啊...刷了后回不到官方了
301W最新版本的官方固件，有没有办法刷openwrt?大神能不能试一下，上一次看你的视频刷黑了，还好官方帮助解决了
请教下金水，威联通301w原始固件，多wan时是叠加使用？还是怎么样的？并没看到lan指定wan或叠加选项，问客服吧，又说是随机选定。我感觉这有点不可思议
好东西，就是有点贵！玩玩可以！家用主力还是X86香！
为什么NVME硬盘能不能用后面没说》？
家里用个商用路由器，有这个必要吗？
从来没说需要在家里用企业型路由器🤣，虽然现在不少人都买UBNT在家里用
安心的做个主路由多好！其它的可以用旁的嘛
只是给需要的人一个新的选择🙃
❌QNPA
⭕QNAP
字幕小哥已祭天
东西很好 但价格劝退。 有没有优惠的路由器 带10G光口的 毕竟光口便宜
没有固件玩啥
评论区置顶
還以為是QNAP….
就是威联通的,JS打错字了
BootROM - 2.03
Starting CP-0 IOROM 1.07
Booting from SPI NOR flash 1 (0x32)
Found valid image at boot postion 0x000
lNOTICE: Starting binary extension
NOTICE: SVC: DEV ID: CN913x, FREQ Mode: 0x6
NOTICE: SVC: AVS work point changed from 0x2de to 0x2de
mv_ddr: Marvell-devel (release) (Jun 08 2022 - 17:52:54)
SSCG_EN
Synopsys DDR43 PHY Firmware version: A-2017.11
SNPS DDR: 1D training passed
SNPS DDR: 2D training passed
SNPS DDR: training completed
dma memcmp pass
mv_ddr: completed successfully
NOTICE: Cold boot
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v2.2(release): (Marvell-10.3.4.0-4)
NOTICE: BL1: Built : 17:52:57, Jun 8 2022
NOTICE: BL1: Booting BL2
NOTICE: BL2: v2.2(release): (Marvell-10.3.4.0-4)
NOTICE: BL2: Built : 17:52:59, Jun 8 2022
NOTICE: Change the base address of AP0-CP1 to f4000000
NOTICE: Change the base address of AP0-CP2 to f6000000
NOTICE: SCP_BL2 contains 7 concatenated images
NOTICE: Load image to CP1 MG
NOTICE: Loading MG image from address 0x402305c Size 0xe0f0 to MG at 0xf4100000
NOTICE: Load image to CP0 MG
NOTICE: Loading MG image from address 0x403114c Size 0xe0f0 to MG at 0xf2100000
NOTICE: Skipping MSS CP3 related image
NOTICE: Load image to CP2 MSS AP0
NOTICE: Loading MSS FW from addr. 0x4040f38 Size 0x1cfc to MSS at 0xf6280000
NOTICE: Done
NOTICE: Load image to CP1 MSS AP0
NOTICE: Loading MSS FW from addr. 0x4042c34 Size 0x1cfc to MSS at 0xf4280000
NOTICE: Done
NOTICE: Load image to CP0 MSS AP0
NOTICE: Loading MSS FW from addr. 0x4044930 Size 0x1cfc to MSS at 0xf2280000
NOTICE: Done
NOTICE: Load image to AP0 MSS
NOTICE: Loading MSS FW from addr. 0x404662c Size 0x5400 to MSS at 0xf0580000
NOTICE: Done
NOTICE: BL1: Booting BL31
lNOTICE: BL31: v2.2(release): (Marvell-10.3.4.0-4)
NOTICE: BL31: Built : 17:53:03, Jun 8 2022
U-Boot 2019.10-10.3.4.0-11 (Jun 08 2022 - 17:52:37 +0800)
Model: QHora-322
SoC: cn9132-A1; AP807-B0; 3xCP115-A0
Clock: CPU 2200 [MHz]
DDR 1200 [MHz]
FABRIC 1200 [MHz]
MSS 200 [MHz]
LLC Enabled (Exclusive Mode)
DRAM: 4 GiB
Running in RAM - U-Boot at: 0x7fee9000
Env at: 0x7ff95cc8
Comphy chip #0:
Comphy-0: SATA1
Comphy-1: SGMII2 3.125 Gbps
Comphy-2: SFI0 10.3125 Gbps
Comphy-3: USB3_HOST1
Comphy-4: SGMII1 3.125 Gbps
Comphy-5: PEX2
UTMI PHY 0 initialized to USB Host1
Comphy chip #1:
Comphy-0: IGNORE
Comphy-1: SGMII2 3.125 Gbps
Comphy-2: SFI0 10.3125 Gbps
Comphy-3: IGNORE
Comphy-4: SGMII1 3.125 Gbps
Comphy-5: IGNORE
Comphy chip #2:
Comphy-0: IGNORE
Comphy-1: SGMII2 3.125 Gbps
Comphy-2: SFI0 10.3125 Gbps
Comphy-3: IGNORE
Comphy-4: SGMII1 3.125 Gbps
Comphy-5: IGNORE
PCIE-0: Link down
NAND: 0 MiB
MMC: sdhci@6e0000: 0
Loading Environment from SPI Flash...
Bus spi@700680 CS0 address is not set correct.
SF: Detected mx25l3205d with page size 256 Bytes, erase size 4 KiB, total 4 MiB
OK
RTC_RX8130: original reg[0x1d]:0x2c
RTC_RX8130: modified reg[0x1d]:0x2c
RTC_RX8130: original reg[0x1f]:0x10
RTC_RX8130: modified reg[0x1f]:0x10
Net: eth0: mvpp2-0 [PRIME], eth1: mvpp2-1, eth2: mvpp2-2, eth3: mvpp2-3, eth4: mvpp2-4, eth5: mvpp2-5, eth6: mvpp2-6, eth7: mvpp2-7, eth8: mvpp2-8
Auto-update from TFTP: Skip auto-update, env. variable 'updatefile' not found
Hit any key to stop autoboot: 0
Marvell>>
Marvell>>
Marvell>>
Marvell>>
Marvell>> usb start
starting USB...
CP0_GPIO_HIGH_CONTROL_CLEAR_REG = 0xf244016c
CP0_GPIO_HIGH_DATA_OUT_SET_REG = 0xf2440170
Bus usb3@510000: Register 2000120 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb3@510000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Marvell>> usb tree
USB device tree:
1 Hub (5 Gb/s, 0mA)
| U-Boot XHCI Host Controller
|
+-2 Mass Storage (480 Mb/s, 100mA)
USB Disk 2.0 9207076712248904412
Marvell>> fatload usb 0:1 0x6500000 initramfs-kernel.bin
95580168 bytes read in 6857 ms (13.3 MiB/s)
Marvell>> fatload usb 0:1 0x6000000 qnap-322.dtb
48791 bytes read in 34 ms (1.4 MiB/s)
Marvell>> booti 0x6500000 - 0x6000000
ERROR: Did not find a cmdline Flattened Device Tree
Starting kernel ...