How to build a diy english wheel tutorial - Roma Custom Bike
HTML-код
- Опубликовано: 7 авг 2024
- Custom Cez builds an home made english wheel DIY.
In this 3 parts episode Custom Cez calls on Janusz "Polsky Rage" Wilczek for help, along with a special guest, a fan of the show that offered his services for the show's noble cause, Sergio from the FB group Rat Bike Italia.
This english build is divided in 3 parts, the construction of the frame, the manufacturing of the anvil supports and, last but not list, the construction of the lift mechanism.
CHAPTERS:
00:00 - English wheel plans animation
00:29 - Welding of the frame
01:31 - Transfer of the blue print to the stock
01:37 - Cutting of the stock
01:45 - Perforation
02:25 - Assembly and welding of the pieces
03:55 - Creation of the spacers
04:16 - Carving of the bottom support pin
05:00 - creating the wheel support
07:33 - creating the lift mechanism and working the piston and cylinder on the lathe
08:23 - CNCed a pocket on the steel tube
09:05 - Welded the tube to the main structure
10:00 - finalized the build
11:10 - tested the english wheel with a piece of aluminum sheet
Original episodes:
Part 1:
• How to build a DIY eng...
Part 2:
• How to build an englis...
Part 3:
www.youtube.com/watch?v=qmHcq...
PART ONE - BUILDING THE FRAME
Janusz brought us a bunch of tubing left over from a construction site to use to build the frame of the english wheel.
While working on the project Janusz has taken the opportunity to teach us a couple of tricks on how to weld for strength and penetration, which resulted in an actual welding competition among us.
The frame is assembled and strengthen while checking alignment and tolerances to produce a nice final result.
What did we do:
Tube cutting
Welding of the frame
Tolerances check
PART TWO - THE ANVIL SUPPORTS
In the second episode we make the support brackets that will hold the top and bottom anvils. The bottom one is designed for quick change of the wheel depending on the needed radius.
We start by cutting the necessary pieces to assemble the top bracket, three pieces made out of 5mm stock plate. We make the two holes on the side panels using a press drill with a step bit.
Then we tackle the bottom wheel support, spacers and the center pin.
What did we do:
- Transfer of the blue print to the stock
- Cutting of the stock
- Perforation
- Assembly and welding of the pieces
- Creation of the spacers
- Carving of the bottom support pin
PART THREE - THE LIFT MECHANISM
In this 3rd and final part we make the lifting mechanism for the bottom anvil.
We went to see my neighbor, Mr. Pietro, to use his lathe so we could make the piston and cylinder for the system.
Them we CNCed a pocket on the tube to fit a pin on the piston so it would travel straight up and down and finalized the build of the English wheel.
What did we do:
- worked the piston and cylinder on the lathe
- CNCed a pocket on the steel tube
- Welded the tube to the main structure
- finalized the build
- tested the english wheel with a piece of aluminum sheet
An RMPnet.com production, music by FAS.
Visit the show homepage www.romacustombike.com/
or the episode page: www.romacustombike.com/web-ser...
Check out our social platforms:
/ romacustombikeeng
/ customcezusa
/ romacustombike
/ customcez
Download the official soundrtack:
iTunes: goo.gl/WTDraf
Spotify: goo.gl/NgwgjV
Deezer: goo.gl/HGihfX
Tidal: goo.gl/4x1iyo
Google play Music: goo.gl/HuHRLB
______________________ 
Авто/Мото
best tool ever invented speed square used one for years , as being a roofer you can also use it as a level, English wheel is also a great tool
A fine thread 6000 lb. trailer jack worked well for my anvil adjustment. Nice job !!
Complimenti! Sei davvero forte!!! Un Mito!!!
Awesome. Thank you.
VERY NICE JOB. THANKS
Thanks bro 👍👌..i Will try this at home
Excellent! 👍
Thank you Konstantin 😊
Super job
Nice video! Keep it up!
Thanks man! Sure will try :D
I could point out a couple of things my metalwork teacher would chop my hands off for doing, but i won't. Excellent video guys.
Hahah, i’m pretty sure I know what they are 😉 thank you very much man!
Please do tell. This is a trade/ art/ task that is done by a dying breed. We who are trying to learn and keep it alive need all the info we can get. Even if it is just trivial or minimal this info needs to be repeated.
Very good creation this video
GRACIAS POR COMPARTIR Y CON ESAS ROLAS MAS SE MOTIVA UNO AAAAAuuuuuu
Excelente 👍 gracias por compartir tus conocimientos saludos cordiales desde Cali Colombia 🇦🇲, deberían de dar medidas
Whooo ! Ça a l'air cool ici, gardez ce mood rock in DIY +1abo✅
PARABÉNS meus amigos... gostei muito... vcs mandam muito bem👊🇧🇷👊🇧🇷👏👏👏👏🙌🤝 viu fazer uma obrigado 🙏
Boa tarde amigo. Conseguiu fazer sua roda inglesa?
Health and safety !!!
show galera estão de parabéns.
+Juniele Cardozo Muito obrigado meu amigo 😊
Good job
From indonesia
mantap sangat berguna & manfaat👍
Nunca mas me quejare del poco espacio q tengo en mi taller!
Awesome
hebat sekali,( amazing) . I am Indonesia
muito bom vou copiar de vcs e fazer uma igual aqui no BRAZIL ok
Salvajada cuando tienes todas esas herramientas 🛠
nice music great work thank you
podpowiedzcie proszę jakie są wymiary i długości ramy ?
muy bueno
I built one of these about 5 years ago. I used a Ford axle bearing and a self centering bearing. I works great for small things.
Buongiorno :-)
La Vostra passione trasuda da tutti pori ;-) Complimenti!
Domanda: che software hai usato per disegnare il 3D del pezzo?
Grazie mille :-)
p.s. - Che marca e modello è la tua pistola/sistema di verniciatura a polvere? Thanks! ;-)
Great video guys, please make more DIY
PS: who's the woman in the poster at the back lmao
Wo bekommt man den Anreißwinkel den ihr benutzt?
Great work you guys - and a great video! Where did you get the wheels?
Thanks Scott :) I bought them on ebay in the United States, used for 60$
Nice work and good explanation thanks. I wonder which electrodes did you use; rutile or CaF2?
Thank you very much :) I don't know about the electrodes cause by now the box has run out. I had my buddy pick them up
Thank you for reply. :)
certo che come metodo di lavoro (sicurezza) siete degli animali :D
hahahaha si alle volte ci lasciamo trasportare :)
Would love to know where you sourced the anvil and rolls from?
You can get them on ebay also harbor freight. I used an axle bearing from a 9" ford rear end and a radius self center bearing I got from tractor supply.
👍👍👍👍👍
Çok güzel
Qual é o tamanho das peças que usam na roda inglesa.
This was good but I couldn’t make out the measurements, Any one knows the measurements?
Where do you get the steel wheels from?
Las medidas exactas ? Calibres, etc. ?
ciao, ti volevo chiedere che colore hai usato per i cerchi della tua moto. è davvero bellissimo e lo vorrei rifare sulla mia monster 600
Ciao Giovanni, io ho usato il rosso trasparente in polvere su una base cromata. Se vuoi il rosso e' questo: verniceapolvere.it/prodotti/polveri/colori-trasparenti/rosso-trasparente-detail
+Custom Cez Fai Da Te , ci tenevo a dirti che i vostri video sono bellissimi. e mi avete fatto appassionare al mondo del custom. grazie ancora e continuate cosi👍👍👍
where to get the wheel at?
did he ever say where he got the wheels
like
Buen dia, saben en Mexico donde se pueden conseguir los rodillos o si se pueden mandar a hacer?
Hola, Isaías, los compré en ebay.com en los Estados Unidos y los mandé a Italia, tal como soy. Es posible que desee intentar lo mismo.
en tun torno te los fabrican .
@@schmutzigx hola, sabes cual serian las medidas de los rodillos para fabricar al torno.
Hi pls tell me size of STEEL TUBING width and LENGTH ROUND PIPE size
What are the sizes of the rollers?
Bel progetto ma la ruota sotto dove si compra??
Io l’ho prese sull’ebay americano. In italia non si trovano
Like
Tem como você passar as medidas
Que puedes hacer con tu herramienta mi hno ?
Why not you did the anvils,it 's the most difficult part to do !
What's the first songs name?
Harbor freight English wheel 230 dollars,,,others selling same one for 600,,,love mine,,
Well done yer saved $500
Ребята, а как делали верхний и нижний ролики?
Backsound nya enak.. band ?
What was the overall cost of the project?
about 70$ for the wheels bought used on ebay usa, 25 Euros of stock metal for the cylindrical raiser (the one we worked on the lathe, had to buy a full meter of it) and the rest of the metal was scrap from a construction site.
From Pakistan 🇵🇰
did you buy the die wheels or make them?
Jay Greig those are pretty easy to do on a lathe
Yes, now all I need is a lathe...
Coustom Cez give me title of music from 0 to 3.12 and who sing it?
Hey Punznies :) i wrote, played most instruments and sang all the songs in the series. The one in particular you speak of is called "Sign" I'll hopefully be able to release the album soon
thanks for the message. I did not notice that you wrote about it. really good music. I can not wait to get it to listen to the car.
puznies0 thank you very much man!!! I really appreciate it 😊
Bad protection = dislike but great job, I liked the rest.
onde emcontro uma roldana grande assim
Always wanted English wheel, but they're too expensive.
John, just get a set of wheels from ebay and build your own frame :)
Not,if you do it "
masamant plz
Hi Guys,
good idea.....but it would be much better to spend a little bit extra money for a heavier and stronger frame.
I ve seen a lot of commercial english wheels, they all heavier built .....for some good reason.
Hope you understand my comment right, not as a negative statement. ; -)
Best
La smerigliatrice va usata con la protezione!
Я один боялся что руку порвёт когда пятиметровый метал без зажима сверлят?
Knew there had to be a catch. Mill, lathe, DRO, none of which I have in my garage.
jockellis you can still do it man!!! For the lathe you can have that piston done by a machine shop, i’m sure you can find one in your area, even those people that bore motorcycle cylinders. The stuff I did on the CNC you can do by hand with a drill and a file (and a lot of patience). Everything else is straight up welding and measuring. Look into it and you’ll see that is simpler than it looks 😊
Custom Cez Fai Da Te Thanks. One question: round tube offers much greater twist stability than square tube - according to a mechanical engineer friend so why are these not made of the more twist resistant round tubes.
It’s very hard to work with round stock and it’s much harder to keep thinks square, the walls of this square tube is quite thick and plenty strong for this project.
A parte que gira.
Ma le canzoni strafighe di sottofondo come si chiamano????ahahaha
Big Ef U to PPE.
That's actually easier then it looks if you buy the wheels instead of making them yourself
great vid for those who allways wonderd how... but just dont have the tools you have at hand... :/
you can still do it man!!! For the lathe you can have that piston done by a machine shop, i’m sure you can find one in your area, even those people that bore motorcycle cylinders. The stuff I did on the CNC you can do by hand with a drill and a file (and a lot of patience). Everything else is straight up welding and measuring. Look into it and you’ll see that is simpler than it looks 😊
nic
Typowy Janusz Harlejowiec .Biżuteria musi byc przy robocie.
Зачем крутым парням техника безопасности? Подумаешь, лишний шрам на черепе от болгарочного диска.... Это же круто!? Может всеже с защитой работать?
bel video ma ci sono degli errori (per evitare di farsi male)
1)manca la protezione hai flessibili per evitare che le particelle incandescenti ti finiscono in faccia o peggio negli occhi (anche se metti gli occhiali anti scheggia)
2)quando usi il trapano a colonna il pezzo sempre assicurato alla morsa ancorata sul piano per evitare che la punta si impianta e di conseguenza ferierti alle mani( se usi barre lunghe abbinato ad un sostegno )ti puoi ferire alle costolese nel caso non puoi usare una morsa vanno bene anche le staffe avvite sul ripiano
3) per rifinire la scanalatura era meglio un disco con spessore 3 mm o in alternativa un disco abrasivo lamellare perchè quello da taglio che ha uno spessore da 1 mm se si rompe ti può finire in faccia e se ti và bene ti spacchi il naso (peggio i denti) sempre se ha la protezione superiore
4) hai sbagliato ad usare il calibro. Era più comodo se misuravi il bordo del pezzo fino all'inizio foro di tutti i due i lati (era inutile misurare il diametro foro perche tanto quella misura ti interessa poco o niente)
5) per segnare le righe sulle piaste o pezzi usa una punta di metallo duto come un vecchio maschio appuntito sulla mola
6) quando usi la tela cerca di usarla per tutta la larghezza per 2 motivi principali. il primo perche la sfutti al 100% il secondo se ti si rompe non ti ferisci
7) per saldare usa guanti in crosta(e una pelle dura)che li puoi anche utilizzare anche per levigare con la levigatrice a nasto perche quelli neri che usi sono sono usati per il montaggio
8) strano che su una fresa a cnc venga usata della semplice acqua e non del refrigerante
9) il maschio era meglio se era per fori ciechi (il tuo era per fori passanti)
si hai ragione, noi alle volte ci lasciamo andare un po :)
iam foram sri lanka 100 pasan tanku
Nothing says "I AM A TWAT!" more than cutting one handed with no eye protection while acting like a TOTAL TWAT for the camera than what we see at 1:41
Which by pure coincidence is where i switched off!
that music makes my head hurt.....
The video is great but then you had to go and spoil it with krap music
I wrote and performed all the music for the show and the general consensus is that is good. Sorry you didn’t like it
The comments were going good till the music bitch showed up. There is one in every thread.
Diy Motorhous let me guess , you want poofter music ?
You're short haired home boy is zero fcuks given! 1:35 Don't give a fcuk about mah eyes 3:04 Don't give a fcuk about mah arms.
+Bruno Bronosky that's right! Polsky Rage = zero fucks!!! 🤣🤣🤣
7:20
No sé por qué; pero intuyo que a esos tres gringos les encanta la marihuana!
Good video but we could have used real naration and not the music
wouldn't this be....an ITALIAN wheel ? huh ? huh ? ...i'll let myself out now
hahahaha, no ma stay and have a cold one with us :D
Custom Cez Fai Da Te how'd you know i needed one. Lol
все искры от болгарки в лицо . я увидел это и дальше смотреть не стал . еще и без перчаток .
You guys don’t believe much in PPE’s do you?
Зря сапромат прогуливался
no gloves ever!
Only one guy cares about his eyes
Yes I went there
+Bertsbug hahahha, you are right 😊🤣🤣
nice build,but geez i cringed when you hand held the piece in the drill press. cant tell you enough to clamp your work down instead of doing that. idk how many times ive watched guys do that then the piece busts their fingers or rips flesh off. shop safety is real fellas.
Very dangerous workers....
What is with stupid music
+Gonzalo Rios glad you like it!
only thing good here is the poster.lol.
Thanks for the demo... I'm gonna build one... but please tone down this insane and loud music or take it out entirely. It's such a put off! It ruined your video.
Then turn down your volume???
Gay music