Happy Independence Day! BTW, here are links to some tools that were used in the video (Amazon affiliate links): Heavy Duty Snap Ring Pliers -- amzn.to/3Ld721i Dial Indicator w/ Magnetic Base -- amzn.to/3xHCKAQ Marking Compound -- amzn.to/4cPP4O7 Also, channel memberships are open! Become a member, and you can help shape the future of this channel. Click the Join button below the video, or this link -- ruclips.net/channel/UCOagOQUL9BpkPxFHCQgwGzgjoin
Thanks for the video and detailed instructions! I have all my parts and tools other than new MFactory bearings. ECS/Turner unfortunately shipped the kit with seals and ring gear bolts without the bearings, and there seems to be an inventory issue. I was on the fence on replacing the bearings due to the cost, but now that availability is a bigger challenge then expected; did you test the bearings for proper movement and they seemed okay? Just trying to make the right decision and not grenade my new LSD. Any recommendations and guidance you can provide would be helpful!
Did you get the friction disc LSD or the helical? I'm planning on doing the friction disc one, mainly because I occasionally get the inside wheel off the ground while racing, and the helical really has a issue with that
Happy Independence Day! BTW, here are links to some tools that were used in the video (Amazon affiliate links):
Heavy Duty Snap Ring Pliers -- amzn.to/3Ld721i
Dial Indicator w/ Magnetic Base -- amzn.to/3xHCKAQ
Marking Compound -- amzn.to/4cPP4O7
Also, channel memberships are open! Become a member, and you can help shape the future of this channel. Click the Join button below the video, or this link -- ruclips.net/channel/UCOagOQUL9BpkPxFHCQgwGzgjoin
Nice ending bro❤️
Thanks!
Acceptable gear backlash for the Mfactory unit is (0.003 - 0.009 acceptable), per the install PDF guide from Team MFactory
Thanks for the video and detailed instructions! I have all my parts and tools other than new MFactory bearings. ECS/Turner unfortunately shipped the kit with seals and ring gear bolts without the bearings, and there seems to be an inventory issue. I was on the fence on replacing the bearings due to the cost, but now that availability is a bigger challenge then expected; did you test the bearings for proper movement and they seemed okay? Just trying to make the right decision and not grenade my new LSD. Any recommendations and guidance you can provide would be helpful!
Did you get the friction disc LSD or the helical?
I'm planning on doing the friction disc one, mainly because I occasionally get the inside wheel off the ground while racing, and the helical really has a issue with that
I went helical, because it's basically maintenance free.
It's been a little difficult to find a real world review of the LSD, so I would like to see a follow up on it.
Good idea. I'll keep that in mind.
@umvr me too , it's a great video.
@@umvr ditto.
19:32 ... did you torque the bolts on the LSD??
LOL skip ahead to 27:09