Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/ls/13BO7QKGAZZV2/ref=nav_wishlist_lists_2?_encoding=UTF8&type=wishlist
Hello Mick I'd just like to thank you for your Videos on The ATKO Balmoral series. I was given a 14s last week and have now repaired the pinion and ring gear. I also took the engine out just to check a few things I could not get to while it was in. It's all working great now thanks to you :)
Nice job Mick. Every time you hit that pin i just kept my fingers crossed for you. I remember when you broke a carb doing that, your braver than me. Looked great in the end , top job.
Micks Mowers Merchandise UK Store below micksmowersthemowerman.myspreadshop.co.uk/men?q=D1 Micks Mowers Merchandise USA Store below micks-mowers-usa.myspreadshop.com/all
@@themowerman that is a great idea to do that for sure by the way do you know what the angle is on the bed knife because of it being different than a rotary blade mower or is it the same as the rotary blade mower
Last message but a certain youtuber just uploaded another couple of vids one cutting branches in a random car park fot nobody 😂 and another breaking gardening tool fuel caps 😂 Great video and thank you for the tips sorting out my hayter harrier 41
Is Pip farting up the furniture they do tend to do that 🦮💨 🫨 That carb wasn't giving it up was it you made the right move . Kawasaki well worth the effort 👍
Mick, I notice you refurbish Atco Balmoral Mowers with what pear to be refurbished steel tine bushes behind the front steel roller. Have you refurbed the brush bar? Can you devise where I could obtain the tines or a complete 17 brush bar ?
Can you help? I have a balmoral 17se mower that is difficult to push forward. The roller seems to be getting stuck and catching on something. It's OK pulling it backwards. Thanks, Dave.
Love the Vids Mick im just about to start refurbishing an Atco 17S i found at the dump... I've scoured your videos looking for a damaged spark plug cable but cant seem to see any, any advice on replacing the spark plug boot?
Mick, how many parts do the Atco Balmoral 14sk the Suffolk Punch 14SK have in common. Are the rear rollers the same? Are cables the same wtc? I bought a non running Atco 14 SK with scarifier cassett for £40 and have a Suffolk Punch 14SK i was planning to use as a parts mower.
@@themowerman On low idle speed engine turns off ,also when throttle is open to middle possitiin is working a while than turning off .I cleaned carburettor as You showed on another video but i lost than small spring .
@@themowerman except that small spring which is holding float ,there is missing piece of gasket ...Exactly in place where is screw. It can be a problem as well ?
Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/ls/13BO7QKGAZZV2/ref=nav_wishlist_lists_2?_encoding=UTF8&type=wishlist
Hello Mick I'd just like to thank you for your Videos on The ATKO Balmoral series. I was given a 14s last week and have now repaired the pinion and ring gear. I also took the engine out just to check a few things I could not get to while it was in. It's all working great now thanks to you :)
No worries me old mucker.. happy mowing
Great save mate - that grass box looks perfect in the gloss. Cheers and nice weekend 👍
Another fine job done by the number one mower Man spot on Mick 👍👍👍👍
Ta mate
Nice job Mick. Every time you hit that pin i just kept my fingers crossed for you. I remember when you broke a carb doing that, your braver than me. Looked great in the end , top job.
Nice lady you have there! Coffee was nice of her.
Another save by the Master!
Thanks ken...
Micks Mowers Merchandise UK Store below
micksmowersthemowerman.myspreadshop.co.uk/men?q=D1
Micks Mowers Merchandise USA Store below
micks-mowers-usa.myspreadshop.com/all
Very good job Mick. I hope you, Riley boy and family are doing well 🔧👍
Nice job Mick. I've been using an old screen wash bottle with the side cut out to drain the oil in and then you can empty it out the cap
Good idea
Great video, I love the care you put into doing these and it's just not a quick do-up. 17SK is definitely the mower I want to go for 😍
Glad you got the reel and the bed knife professional sharpend because it can be a little testing of your skills to do that
It's always easier to get Mr Jones to do it
@@themowerman that is a great idea to do that for sure by the way do you know what the angle is on the bed knife because of it being different than a rotary blade mower or is it the same as the rotary blade mower
Last message but a certain youtuber just uploaded another couple of vids one cutting branches in a random car park fot nobody 😂 and another breaking gardening tool fuel caps 😂
Great video and thank you for the tips sorting out my hayter harrier 41
I'm on my way to have a look....
I want to see him doing some tree felling lol
@@themowerman that would be great :) he'd be chased off the site
TOOLS I USE -
Oil Extraction pump amzn.to/2UBApDI
Fan Blade Bulb amzn.to/39BLI4a
Blade removel tool amzn.to/3nxBVQj
Micro Drill Bits amzn.to/36Jpv0R
Carb Cleaning Files amzn.to/3lH8ESx
Hex Shank Extension Drill Bits Bar Set 1/4" 3/8" 1/2" amzn.to/3oFKHx9
Dewalt DCF887M1- Impact Driver, amzn.to/3oEVcjZ
Lawnmower Rotary Blade Balancer amzn.to/3e6UOWN
Rode WIGO Wireless GO Wireless Microphone amzn.to/2JlRlIN
Neewer 176 LED Light amzn.to/2HaubnJ
Universal Style, Mower Deck clamp for blades amzn.to/31PKygE
Briggs & Stratton Diaphragm and Gasket set amzn.to/3kF8Y3H
GT SONIC 3L Ultrasonic Cleaner amzn.to/2TDdVy9
VEVOR 3L Ultrasonic Cleaner amzn.to/2Gb3PBJ
Stainless Steel Strainer for carb jets in a cleaner amzn.to/3e6CxJ2
Is Pip farting up the furniture they do tend to do that 🦮💨 🫨 That carb wasn't giving it up was it you made the right move . Kawasaki well worth the effort 👍
You and your atco. Great job mick hope your all ok
Mint mate and thanks for the mention. Mower Boy x
You welcome cupcake
Nice job on that Atco looks great
Very nice machine.
Nice job Mick
Ta mate
The grass box looks amazing did you do anything to make it so shinney?
Wd40... Simple as that
Thank you for the video
Another top job Mick whats it worth now ? it will last longer than a new one and is better built,,,,
Ohhh they sell at around £600
Mick, I notice you refurbish Atco Balmoral Mowers with what pear to be refurbished steel tine bushes behind the front steel roller. Have you refurbed the brush bar? Can you devise where I could obtain the tines or a complete 17 brush bar ?
I take the brush bar out and take it all apart.. clean it and spray it..
@@themowerman are replacement tines available anywhere?
@@johngrice4043 I don't believe so
Can you help? I have a balmoral 17se mower that is difficult to push forward. The roller seems to be getting stuck and catching on something. It's OK pulling it backwards. Thanks, Dave.
Could be something as simple as a belt adjustment or replacement
Love the Vids Mick im just about to start refurbishing an Atco 17S i found at the dump... I've scoured your videos looking for a damaged spark plug cable but cant seem to see any, any advice on replacing the spark plug boot?
Is it just the boot?
Yes sir!
@@joefulcher9737 just pull it off... A little wd40 inside the new one and just push the new one on...
@@themowerman love it thanks :)
@@joefulcher9737 no worries
Mick, how many parts do the Atco Balmoral 14sk the Suffolk Punch 14SK have in common. Are the rear rollers the same? Are cables the same wtc?
I bought a non running Atco 14 SK with scarifier cassett for £40 and have a Suffolk Punch 14SK i was planning to use as a parts mower.
They are nearly all the same mate ... One in poor condition will be a good parts mower for an Atco
Magic mate. Thanks. What lacquer did you use on the Atco grass box in the video?
@@barriestewart8526 a good gloss petrol resistant one..
OK guys got a cylinder mower that runs great, cuts grass, but when not running it won't push forward or pull in reverse any ideas?
I have lots of videos on this problem..
Is there any way I could get in touch with yourself for some advice pal
Email or Instagram mate
Hey man nice job another thing I want to bring tension to you got a set alarms on you Guy I wouldn’t want to run into you or make you mad L O L
I'm a general giant .....
I lost that spring ,on float and engine not working properly. Is that becouse i did not put that spring back ?
Yes possible.. what is the engine doing .?
@@themowerman On low idle speed engine turns off ,also when throttle is open to middle possitiin is working a while than turning off .I cleaned carburettor as You showed on another video but i lost than small spring .
@@drakodrako1 have you set the tick over and tuned the carb?
@@themowerman i didn't change anything except that screw which is responsible for rpm (this one above carburettor)
@@themowerman except that small spring which is holding float ,there is missing piece of gasket ...Exactly in place where is screw. It can be a problem as well ?
Pip maybe eating her own poop, couple of my dogs used to do that,
She likes the cat variety
Great job fella👍🏻