I got the Flare 2 but thanks to your video I have an idea how it looks under the skin. Very nice presentable teardown. Thank you Jin Thao. Instant subscribed.
You didn't take out the charge port,power button, Bluetooth button and headphone jack. (Those all are in one peice) there are 6screws but it dont pop out easily and I don't want to take it or the wrong way. That's the only part I'm no nor sure how to do it and it's the one part you didn't do. I might make a video on how to or not to disassemble (depends on if I get it out correctly)
Hey so I had a question about my soundcore flare 2. Whenever I turn on the Bass the speaker completely turns off it also rattles like something is maybe loose inside there can you please help me?
I have the same problem. Started after a disassemble to “fix” the battery. The rattle happens as the motherboard bounce around the backplate area. Dunno how to fix it yet.
Yeah, I 2nd that request... I own the Flare+ and am trying to get the exact mAh of it, but so far I haven’t been able to get a listing of it online. Boooo!🤨
My man, that helped me out big time, but I was wondering if you can do a video on how to reattach the USB charging port, because mine came undone to where I can't charge the speaker the charging wire won't stay in and you can here the piece rattling inside
Hey. I need some advice if it's possible?! I dropped the speaker and it doesn't turn on anymore. I put it on charge and it does charge and turn on, but doesn't connect. Any advice for what I could do to try and fix it?
Agreed. The video doesn't show removal of the ribbon cable from the board. This seems like the fiddliest thing to do. Does anyone know? Is it a simple as pull it out or will that break something?
@@Danneskjold_Ragn Did you know where to buy the soundcore flare spare parts....my speaker Bluetooth button and power button damaged the rubber completely cracked....
Do you know the model/name of the Bluetooth board soldiered onto the circuit board upon teardown? I was looking at the 5.0 but it does not have aptX or better and was looking to maybe replace the on-board one with an aftermarket version.
I got the Flare 2 but thanks to your video I have an idea how it looks under the skin. Very nice presentable teardown. Thank you Jin Thao. Instant subscribed.
I just found out about this page and I love it because I was thinking of doing this with my old Anker
I'm going to get this speaker in two weeks and this video was really interesting!
please make a video disassemble Anker Soundcore motion q, I want to open the grille of motion Q , but I can't
Thorough. Thank you for posting. This wasvery helpful.
I'm glad I found this channel.. very interesting.. Great video.. I'm glad I subscribed!
Just got one of these, sounds good for the size it is, Anker always makes good stuff, only got it cause the same brand as my earbuds, which bang
I wanted to know how to change charging port in soundcore flare plus. Can you please guide me regarding that.
Thanks
Have you managed to do this? Same problem here
Asking the same question.
You didn't take out the charge port,power button, Bluetooth button and headphone jack. (Those all are in one peice) there are 6screws but it dont pop out easily and I don't want to take it or the wrong way. That's the only part I'm no nor sure how to do it and it's the one part you didn't do. I might make a video on how to or not to disassemble (depends on if I get it out correctly)
have u managed to do it? if so, how? i'm struggling with this same part
Hey so I had a question about my soundcore flare 2. Whenever I turn on the Bass the speaker completely turns off it also rattles like something is maybe loose inside there can you please help me?
I have the same problem. Started after a disassemble to “fix” the battery. The rattle happens as the motherboard bounce around the backplate area. Dunno how to fix it yet.
@@RemmySpicy do you think putting Gorilla Glue and mounting it back would work? By the way I loved your video
Can you do it for flare plus as well?
Yeah, I 2nd that request... I own the Flare+ and am trying to get the exact mAh of it, but so far I haven’t been able to get a listing of it online. Boooo!🤨
My man, that helped me out big time, but I was wondering if you can do a video on how to reattach the USB charging port, because mine came undone to where I can't charge the speaker the charging wire won't stay in and you can here the piece rattling inside
My micro USB port isn't able to hold the cable too, its out of place, how do you fix that?
what the spec of the mini speaker parts this anker has? Ohm & watt
Where could I get the speaker cable and the battery and other cables at any ideas are appreciated thanks
Hey. I need some advice if it's possible?! I dropped the speaker and it doesn't turn on anymore. I put it on charge and it does charge and turn on, but doesn't connect. Any advice for what I could do to try and fix it?
Its really well made
How do I fix mine? The power button went bad. I don’t know how to fix it. Is there like a way I can get a new one? Or the speaker is gone?
Can u teardown the flare plus
Anyone knows whats is the model of the battery? Main i dead so i'll try to replace it
Hey, how do I open the mash from the flare mini
Please could you do a soundcore Motion Q teardown.
Ok can u teardown anker Soundcore rave Neo
bro pls teardown awei y331
May i know how could i fix my soundcore flare ? because the battery drained .. i didnt charge it before it shut😭😭😭
yEs i tRy but it wAsnt😓😓😓
What's the size of your screw driver
Cool men I'm from Brazil!
How did I miss you disconnecting the ribbon cable?
Agreed. The video doesn't show removal of the ribbon cable from the board. This seems like the fiddliest thing to do. Does anyone know? Is it a simple as pull it out or will that break something?
Thank you
Bluetooth and power button damaged , how to get parts ?
I'd like to know the same. Did you find it?
@@Danneskjold_Ragn i don't know where to buy the parts 🥲.....i am adjusted with maskin tape...
@@Danneskjold_Ragn Did you know where to buy the soundcore flare spare parts....my speaker Bluetooth button and power button damaged the rubber completely cracked....
Please Please please 🙏 do anker soundcore motion Q
Do you know the model/name of the Bluetooth board soldiered onto the circuit board upon teardown? I was looking at the 5.0 but it does not have aptX or better and was looking to maybe replace the on-board one with an aftermarket version.
Doug Carmack it seems to be ats2825
Nice
Not help full because amplifier ic number
Please, get yourself a pop filter for your microphone.
Tnz
Cool men I'm from Brazil!
Thank you
How do I fix mine? The power button went bad. I don’t know how to fix it. Is there like a way I can get a new one? Or the speaker is gone?
Same with me. Did you get a new button?