This guy doesn't need machines; he is one himself! Always working, real passionate, mega-efficient & totally driven! I don't know what it is about his videos but they're just so watchable; it's like he's the only guy in a America still focused on doing good work amongst all the BS! He doesn't really look at the camera much but in this video I tried to look at his face, see if I could see what makes him tick. I couldn't!
The Bobcat dealer actually told me not to bother replacing steel lines with new steel lines. They advised to have full hoses made up as it would be less expensive, easier to change and last just as long.
Yea when you buy one its good to lift the cab and check the condition or make sure it wasn’t used for loading chicken litter, if it builds up and stays wet under there it can eat away at the metal over time. Being that short it may not matter but if hoses would feel spongier than hard lines.
I have a 1994 863 and Also the large buckets. To deal with tipping issue, I added brackets on both sides in back to hold counter weights from old weight system. Helped out a lot with tipping! These machines can handle a lot of weight if properly weighted.
You are right about the grapple buckets. They are the most useful tools and mine is on the skid steer at least 70% of the time. I did weld/bolt a dozer blade across the bottom of the leading edge to keep from bending when I am digging out heavy roots and big rocks. Can’t thank you enough for all these fabulous videos.
Fantastic video Andrew, Well edited with some great points about the bucket you selected and the pros and cons of the design. I have a CAT 226 and 252B skidsteer and was considering the same bucket purchase. I appreciate your expert advice and your professional opinion of the unit operated on both of your Bobcats. 2 thumbs up from here on the quality of your video work, your site work, and your narratives of all the jobs you get involved in. IMHO you are a talented, true professional and are a very good operator of all your various machines. I've enjoyed numerous hours watching your videos over the years and you continue to amaze with some of your methods and always do a top shelf job with the tree work, excavation and finish grading. Be safe out there !!
You put your heart and soul into this challenge. We love challenge. You're a good young man, American. Why? You love to hustle. That is what we are made of.
I Spent a month researching 4n1 buckets to get a medium duty light enough for my compact tractor, I purchased a construction attachments cmp 4n1 bucket 610 lbs 66” wide. It works great. I like your work thank you for sharing.
It's the same with many tools that do multiple jobs they don't do everything well, there is probably a way that you could improve that bucket yourself once you get to know it better, I've seen what you can do in your videos and your a very resourceful guy
You're a very humble and kind man, not give the company any hard time deliver this bucket. If they where descent, they will refund you instantly without any further discussion. Love your vids! :)
Hey check your hydro oil level, most attachments ship with no oil in them, and when you hook it up for the first time it sucks all your oil and runs it low
@@AndrewCamarata correct. I know it's an older video but it saved my ass. I'm now looking at buckets with 2.5" and 3" diamiter cylinders. Thanks Andrew!
That smaller machine needs a 5' bucket. That 6' bucket is entirely too big for the machine.I've always used the clam shell buckets for loading gravel and sand, as you've found out it doesn't work too well for wet dirt. Maybe it's time for a bigger machine for the bucket? LOL
Also Andrew recommended checking your quick change Couplers, they can restrict flow to your Hydraulic Cylinders. Easy try direct strait lines with out quick change system.
I have owned several bobcats over the years. The buckets generally are the same width as the outside width of the wheels. Anything larger in bucket size creates balance issues, making the machine tippy when bucket is loaded. Also the hydraulic pumps are sized to the machine and certain implements will not operate properly unless pump is compatible. The first bucket was for light materials, i.e. mulch, maybe snow and thats it. It will work on the 743 for those materials and not cause balance problems. The 4/1 is what it is. The pump on the 743 probably did not have high enough psi. I think if you check the pump ratings on your two bobcats this will be why it works on one and not the other.
Andrew, to help manage the extra hose length: Shoup Farm equipment ( google their website) sells a spring steel hose support/ standoff real cheap. It will hold hoses routed up off the top of the bucket and allow the hose to slide through and return. Keeps it from getting pinched when you dump and curl the bucket. Welds to upper edge. I have one on my CTL attachments. Saves hoses and lost work time. Can send you a photo if you wish.
Thank you for an excellent review on the four and one bucket. I wasn't planning on getting one but if I ever think about it I'll remember you and how you saved me some aggravation and money. I really enjoy your videos. You don't hide very much like a lot of other video editing. We can all see the difficulty and how it really isn't as easy as it looks in some of those other videos. Thank you!
The bridge project is my favorite of them all. The complete bridge video is really great folks. I like all the water related projects like the bridge, culverts, ponds and drainage etc.
I work for Bobcat but I don't work where they build the skid steers.I used to build allot of the attachments but they move them around to different states.I am a welder and I build the MX buckets{back hoe} and allot of the different breaker backs components.I also build the dirt and GP buckets.The sides are different but looks like that's a grain bucket.You need a C/I bucket.Its shorter in depth{blade to back}And it's built tough and made for digging in dirt.C/I stands for construction industrial encase you didn't know.
i'm glad you chimed in. do you know if people add counterweights to the small skid steers? it appears they're not designed for it but... i was wondering if the rear chassis would have room to weld on a mounting bracket to support a counterweight frame. with 200kg hanging off the back, andrew would get the stability he needs.
@@bashisobsolete.pythonismyn6321 I don't think it's possible to add weights in the rear.There is a door on the rear for back of engine access.That is an old style of Bobcat.Probably when it was Melroe Bobcat.Then they were Ingersoll Rand.Now they are Doosan as of 2008-9,can't remember which year.
Great video Andrew, Well edited with some great points about the bucket you selected and the pros and cons of the design. keep up the great videos, take care.
I have the same size four in one bucket as you have here in the uk, and have no problems opening it when full. I can even load big muckaway trucks with ease. Admittedly its not fitted on a Bobcat but on a Thomas loader. Its been an Extremely useful bit of kit and have even demolished large buildings by munching them down with the bucket. I bought this bucket second hand from Versatile Equipment and suspect that part of the problem you have seems to be the way the bucket is balanced. But i know how frustrating these sort of problems can be so good luck with finding a happy solution.
Excellent and informative video Andrew! Definitely food for thought. A bucket like that would be better on the front loader of a backhoe because it would be visible to doze with by the operator and would increase the function of an already limited machine. I've seen them on old case backhoes and the clam shell has a spike tooth on each outside side edge, front and back, that helps grab logs etc. Thank you again for the work that went in to making your video.
Have even used my four in one bucket to demolish quite big buildings, gripped the roof and pulled it straight off. Have got video doing it. While i still have the original bucket for my THOMAS Skidsteer i tend to use the four in one bucket for most jobs. Only problem i seem to have is that my bucket only has a straight cutting edge and not teeth, which would sometimes be nice. I bought this bucket as nearly new and it has performed wonderfully.👍🏻👍🏻👍🏻
Root Grapple is a good bucket for moving brush and no dirt.Where I work we make these and the Grapple Bucket to move brush and dirt as well.I really do enjoy watching your videos so don't take any of my comments negatively.I don't like seeing after market attachments of Bobcat skid steers.
Sorry to necro this comment, but watching this later the right thing to do would be to invert the cylinder setup so that the opening action is stronger, powered by the full cylinder bore, and the closing action (which could bend the bucket) has lower force, being reduced by the diameter of the rod.
I bought the same bucket. I wasn't impressed. I ran it on a few jobs and then sold it. Spot on about using it as a dozer blade. I like to see my work. Keep the videos coming!!!
I dont have a Bobcat... I wont ever have a Bobcat but I just watched your whole video! Not sure why, but I really enjoy what you do and you do a great job of sharing the info with us... for that I thank you for taking the time to do your videos!
Love the video- Especially the part with the Hoses- My family owns a hydraulic and industrial hose company out of Medford Massachusetts- So all that hose stuff interest me - And if that shop couldn’t have done the bent tube (we have a day or 2 turn around time on bent tube) you could’ve had them make that section of tube out of hose (run the hose around the tubing and around the bends to get a measurement) and add a little extra length to make up for the bends that way you’d have one continuous hose- I’m guess that’s -12 or -10 JIC thread. It wouldn’t be optimal but it definitely would’ve worked and eliminated having to cut and weld that tube. We do hoses sometimes that way especially if the guy doesn’t want to wait for the bent tube and thinks using hose would work. Great video as usual!
Thanks, good advice. I have replaced pre-bent hoses in the past with rubber. In this case I didn't feel it would have worked because of tight clearances with moving parts. That's why it got fixed the way it did. Its still working well.
Best thing for grading with a loader, is a regular bucket with an extra cutting edge welded under the heel, sticking out one or two inch. Not far enough to hinder the bucket curl when loading from a stockpile but enough to skim dirt both ways.
Your one day appraisal is correct I would say as my experience with one of these was about the same. I operated a case with the 4 in 1 and a gannon box scrapper on the rear. I pretty much did all the grading with the gannon and only used the bucket for loading large rocks into a pile. I'm a natural for grading as my bosses all said and the 4in1 just dosen't cut it!
Hello I have a mini skid steer and it came with a 4 in 1 bucket. I used it for a short time till I bought a drop off bucket which I use all the time now. The great part of that bucket is it will dump the dirt on the other side of the truck, which makes it so easy and quick to load the truck. I have four buckets all together and use that one the most.
Very clever young bloke . Lots of knowledge . I hate hydraulics too . The amount of hard lines Iv replaced with flex pressure hose . Just like you cut the ends off mig weld them to the new hose fitting . End of problem
You are going to hate that bucket until you put it on a different machine. Also, not a fan of welded on cutting edges. You may want to check your auxiliary hydro pressure by snapping a gauge on your quick connectors.
You used to be a heavy equipment Mechanic Jimmy, what would you say to maybe flipping the bucket open cylinders 180 degrees so instead of opening with the rod end, you're opening with the barrel end so you get the full grunt?
The only adverse effects that I could see would be the barrel moving up and down along with the hoses and fittings, as opposed to being stationary, and the clamping force when used as a grapple would be reduced.
For the way Andrew seems to want to use the contraption, I suspect the trade-off between actually being able to open it mid-air and grapple clamping force (which it looks about useless at anyhow) would probably be worth it. At least that's what I'd be doing if it were my bucket.
no kubota has heavy duty hydrulic system no electric controls wich my buddy has 2 svl 75-2's wich lifts heavier materials plus kubota skid steer arms are more longer and solid strong stable skidsteers out plus dealers of kubota takes $2500 off
When grading with a 4 in 1 tilt open bucket forward drop the front edge of the bucket down to kind of pre grade the material. A little playing around and it will become second nature. Also using a 4 in 1 on a pile of dirt sometimes is easier to approach pile bucket open and fill via pulling back from the top, a lot easier on the machine as you are not asking the machine to move the unmovable.
I have an original 60" Bobcat brand 4in1 on my 743. Opens and closes with anything in the bucket. Bites a 2x4 in half with jaw. A touch heavy to load wet material at full height but 1000% better than the thing you bought. Looks like teeth were an afterthought on yours, they should always be at full width of bucket angled a few degrees outwards. I honestly think you will learn to hate that thing in no-time. Hopefully the cutting edges are all easily replaceable like they are on the Bobcat brand, once you wear the heel down from dozing the bucket will leak material. Sometimes "cheap" stuff on ebay is exactly that....... Great video and good luck :)
To fix the bucket opening problem, cut the yokes off the bucket along the welds and weld them on slightly tipped backwards. It won't open as far but it would make it work for what you want. It will only cost you time and welding materials
Yes a smaller bucket or more horsepower. I have a 1989 743 I love it 31 years and running strong, I use it under houses took off cage to make low profile..
More leverage is more leverage. Weak opening doesn't mean strong clamping. It's the same cylinders on the same bucket in the same orientation. More opening strength means more clamping strength.
mwilliamshs when you push a car out of the ditch , do you push on the side or the back ? I. I the top of the Eyes is max push . As it rolls over , the push diminishes , because it shortens the leverage !
So the difference you're referring to, the highest concentration of force within the pin's circumference, is less than 3/4" from its polar opposite. You really think 3/4" of bias toward pinch vs open is significant?
Ive been watchimg your video again and thinking this bucket must not have big enough cylinders on it. Because I've had a 743, 863, T300, T190, T770 and a T870 all with 4 in 1 buckets with no issues with opening. The buckets were bought for the machine at bobcat though. My Cat 299 has a 4 in 1 now with no issues as well. I have to have one for grading up around garages etc. paving. Loading is so much easier with one as well. I can pile my tri axles to the brim.
The arm beyond the hinge on the bucket that connects to the top of the hydraulic cylinder needs to be longer. It's not using the advantages of a lever.
Great show. We have 2 medium and 1 large skid-steers (wheel loaders) made by New Holland. They'll lift the back of a Ford F150 off the ground. They will actually lift more then they can move. Very strong hydraulics. If we ever got another machine, I would love to try a JCB.! Trax are nice (floatation) but tires seem quicker and way cheaper and less parts to wear out. I like your channel.!
For the hearing impaired would be nice to have transcript in description. Love your videos. I purchased a Demo Dozer for my skid loader, a friend's recommendation.
I own a Napa store and we make hoses and those bobcat style with the metal tubing are a pain in the ass....but you sure have eliminated that pain. Now I know what to tell my customers if the have a welder 👍🏻
ditto, just watch the fail channels that have episodes including chain breaks: Human injuries; broken glass; free of charge body modification (auto)...
@@retiredinbali9565 thank you.... growing up in Alaska, sometimes one gets stuck during break up in the spring.... older sourdoughs taught us young pups that means to avoid the shock to either vehicle.
I am a huge fan of your channel sir...I watch every video you post and learn so much from them. I am far from an expert on anything compared you, but I am have the same exact 4 in 1 from Titan on my 763 and it opens and closes with extreme force. I can actually crush metal with it! I would call Titan directly and see what they say. I have called them before with questions/issues with other products I purchased from them and they have either helped troubleshoot the issue or replaced the item
Brother you really need counter weights on all your machines they make a world of a difference , never had a problem loading the hell out of my half yard bucket on the John deer skid steer , very stable with counter weights on the back
Wow! Been following for a few months. Kudos!! You've hit the sweet spot, But for us non-wrenchers can you explain a little more about things like how hydraulics work before you fix the hydraulics? Love that you're staying with your down home roots. Best advice I ever got in my life is "You're never as good as or as bad as you think you are." Love it. Can't wait for your next installment.
I found with a 4in1 bucket for grading to make work easier I would open up the bucket and roll it forward, so that the back side of the front part of the bucket with the teeth was in contact with what ever I am grading off. As aposed to opening up the bucket and using the front bottom side of the back part of the bucket as like you were using. Not sure if this makes 100% sense to everyone or not but this is how I use a 4in1 bucket for grading off
I'd weld several (3 or 4) close overlapping long teeth which are slightly above and angled upwards on the inside join between the bucket and the blade to be able to grapple things better when the bucket is full open. Make sure to weld them in place above the blade cut line so that your blading runs are still smooth. It might make for picking up stumps and brush much easier.
Operator problems, Spend allot more time with the bucket and you will get better, Grapple is totally different in both operational design, it would be like you comparing the Grapple for picking up dirt to the dirt Bucket, Here in Australia No machines are bought with GP buckets, With 4 In 1's we use Spreader bars and this leaves your machines for Dead, you will bend the floor of 4 in 1's in picking up large Rocks, Good Quality Buckets here won't bend but yours doesn't have good enough Cylinders to open or Grab but I would also guess that the hinge points won't work well if the rams were up sized. Your operational skill is not far off from getting much better with it, I can tell you that if you do persevere then you would never go back, But I think in the States from what I have seen is that no one Knows how to use them Correctly so everyone gives up and I would say most are just missing the operational methods by just a little bit. Best of Luck and enjoy you video's
Attitude Adjuster, it's interesting, isn't it? Americans don't seem to use 4 in 1s, and I've very rarely seen a spreader bar being used on any of their machines. Here in Oz, every operator has a 4 in 1 and one correctly sized for the machine, and they mostly do very good work with them. The 4 in 1 which Andrew bought certainly looks too big for that machine.
Right tool for the right job. One thought I had was a quick removable rod mounted to the cage roof with a camera on the end out so you can see the blade. Small tablet with Bluetooth to pick up the camera feed. You could see the action on the blade.
When you are trying to grade with the bulldozer, I was taught to open the bucket most of the way, set the back edge down on the ground and the "front" edge of the clam on the ground level with it, then do your pushing. Much like when you do a back drag to get a scoop but just with both edges on the ground and going forward instead. The way that clamshell is designed, if you back drag over a stump to hard it will bow the middle of the bucket. Those pistons did look a bit to small diameter. If you are yanking small trees out of the ground with it, grab them somewhat centered on where quick attach bracket connects to the bucket, close the clam enough to grip the tree but not cut it off, then drive a bit forward while rolling the bucket back and up. Also for the bulldozer blade, you just have to get the hang of where the blade is by looking at where the back of the bucket is touching the ground. On the Takeuchi I used, you could tell by looking at the outsides of the quick attach at the ground. I am an expert with the machine by no means, but I hope these words help. you may have bought a bucket that is just a bit to big even for your tracked machine. perhaps you don't have enough hydraulic pressure for what is needed for that bucket? letsdig18 has some videos of grading like I mentioned too, if you want to look them up on here.
I had a 738 like that all they are good for is cleaning out chicken houses ,mulch or a backhoe attachment . The wheel base is too close together and it stayed on the front wheels or the back wheels all the time . Glad I got rid of it . . The 864 you got is a great machine its strong not to have a turbo on it .
You just got to get use to it. I don’t have problems like you. If you’re moving a lot of rubbish or brush you need a different buckets but with dirt or gravel the 4 in 1 is the one you really want.
That bucket is too heavy for the 743B. The 864 should open it with no issue, I think the bucket pistons are too weak, as you mentioned in the video they’re undersized. I have an 843 and use the 4 in 1 and even with wet sticky clay it opens right up. Just be cautious of your tracks, the bucket is too narrow and you could damage the sides of the tracks. Best of luck to you, keep the vids coming they’re great.
You gave me a bit of a scare when you started to dump your truck on a slant at the bridge, see about the 26:00 minute mark. I'm thinking that you'll 'get the hang of it' with more practice. Different tools for different job, I guess Andrew!
The 4 in 1 bucket is a good tool on the job site try opening the clam only about 4 to 5 in when using the Dozer blade drag the back of the clam will only allow your Dozer blade to cut so much at a time it won't go gouge in and it works or like a scrapers the dirt will roll forward and fill the bottom sorta like a scraper pan
I had a 4in1 bucket for my mini skid steer. I was so happy when I got that bucket, used it a few times and never used it again. It just didn’t do what I thought it would do. So after that I bought a hydraulic drop off bucket. With that bucket I could dump the load on the other side of the truck and be able to fill the hole truck from one side to the other.
Here in the uk I have a four in one bucket on my THOMAS Skidsteer and find it VERY useful👍🏻 no problems opening it at all. Find that i can load large muckaway trucks with it even when full right up, even reaching right up to get over the sides. Not sure what make it is but think your smaller Bobcat machine is the prob not the bucket👍🏻👍🏻🥴
Can you bump up the hydraulic pressure on that smaller machine without breaking anything? Since the machine is old, do you think the pumps are worn out? That new bucket looks like it works well for grading. Good honest review on this bucket.
On the 863 I was using and on the 443 I welded Chain hooks on the Arm towers. I then could hang the solid tires we have for the 863 for counter weight. I could use 2 on the 443 to counter balance. The relief valves for the Aux hydraulics can be made to go higher in pressure.
You've got it right; when your equipment is down, you make no money so when it is down, take care of everything you can. Keep a notebook: 1) must be done, 2) should be done, 3) when you have some money to play with. And keep a maintenance log on all the equipment. This let's you look forward and back. The buckets you bought: could it be that you haven't greased everything or you need a hydraulic pump that will operate at higher pressure. Good lesson for me. My son has been encouraged by some of his neighbors to start a small "dirt" business. With the loads he hauls, he cannot haul the day before a national holiday or the day after. So he thinks he will get a CAT skid-steer, since he used to rebuild and flip them. But I was hesitant until I saw you with that clam shell. A well used dual axle dump truck a mid sized excavator, a dual axle trailer and a skid steer. Hauling the equipment on a trailer designed for 55 tons with a four axle truck is a bit of overkill. So your video, as usual, was very helpful.
Leverage trumps all. Just one inch would have made all the difference in the world here. One inch larger diameter piston, or if the bolt hole on the armature that controlled the bucket were placed 1 inch further out the bobcat would have more than enough power to power it. But that bucket was obviously designed for the larger models. If the manufacturer had done their homework they could have listed what PSI range the bucket works best with. Maybe they did, idk I wasn't there. Maybe Andrews old bobcat has a worn hydraulic pump, maybe his pressure regulator is set too low or is faulty. These machines should be able to lift enough to make them tip over and he isn't even coming close to doing that in this video.
We have a big machine now but we looked at a bunch of different grapples before buying, its a toss up between heavy enough to last and so heavy it cuts lifting capacity in half. We ordered a little wider to help keep brush off the cab when pushing up
So you still have the old house in addition to the castle? I thought you had moved, but you show both properties here. Completely off-topic, but just curious.
bobcat 743 is a good machine to push snow around and some light stuff we had a 753 around the shop but for earth moving and other bigger jobs you need to invest into bit bigger unit . we sold ours and purchase S770 high flow night and day can lift 2500LBS+ with no problem.
Ha! ha! love it man, warts and all. Hey, I've NEVER gotten stuck on a job site...... (At least not on video, because I'm perfect..... ;-) Seriously though, I feel your pain with the loader, my little kubota is limited like that with even a one ton. (EDIT: Oh, and when it wouldn't open in the air, well done not dropping F-bombs like I would have......)
Hey Andrew absolutely love your videos. I have started my own excavating business partial credit to you and a few other youtubers for giving me the motivation to just go for it. I too just redid all my drive motor lines on my 1994 743b. I went with compression fittings and all went well. Never thought of welding them but dont see why it would be an issue.
ANDREW your definitely talented young man, and amazing WATCHING your SKILLS and how well you able to improvise and make SURE that it'll work, thanks for sharing your thoughts and talents and SKILLS
I owned a 634 and an 853 - we had practically every attachment you could get,inc backhoes for both machines, and we used the Bobcats daily for everything imaginable. Loved them. Did NOT love the 4-way bucket for loading trucks, even on the 853 (which also had the high output hydraulics). Problem- yeah you gain a little height, but you lose capacity BC of the weight, and worse , you lose the length so you have to be tight against the truck, and then you’re dumping right next to the inside of the rail, so after a few scoops it’s the same old problem. As a dozer or grapple it also sucked. Bottom line nobody liked the 4-way and the only thing we used it for was spreading gravel. Exact same experience you had. Ours was Melroe branded and was plenty rugged.
Thanks for the demo. You summed it up perfect with "it can do a lot of things, but none very good" regardless of the machine size, it is what it is.
This guy doesn't need machines; he is one himself! Always working, real passionate, mega-efficient & totally driven! I don't know what it is about his videos but they're just so watchable; it's like he's the only guy in a America still focused on doing good work amongst all the BS! He doesn't really look at the camera much but in this video I tried to look at his face, see if I could see what makes him tick. I couldn't!
The Bobcat dealer actually told me not to bother replacing steel lines with new steel lines. They advised to have full hoses made up as it would be less expensive, easier to change and last just as long.
Yea when you buy one its good to lift the cab and check the condition or make sure it wasn’t used for loading chicken litter, if it builds up and stays wet under there it can eat away at the metal over time. Being that short it may not matter but if hoses would feel spongier than hard lines.
I have a 1994 863 and Also the large buckets. To deal with tipping issue, I added brackets on both sides in back to hold counter weights from old weight system. Helped out a lot with tipping! These machines can handle a lot of weight if properly weighted.
I have flared steel tube by heating with a rosebud and used a flare tool for copper water pipe. It worked and has been on machine for five years.
You are right about the grapple buckets. They are the most useful tools and mine is on the skid steer at least 70% of the time. I did weld/bolt a dozer blade across the bottom of the leading edge to keep from bending when I am digging out heavy roots and big rocks. Can’t thank you enough for all these fabulous videos.
Fantastic video Andrew,
Well edited with some great points about the bucket you selected and the pros and cons of the design.
I have a CAT 226 and 252B skidsteer and was considering the same bucket purchase. I appreciate your expert advice and your professional opinion of the unit operated on both of your Bobcats.
2 thumbs up from here on the quality of your video work, your site work, and your narratives of all the jobs you get involved in.
IMHO you are a talented, true professional and are a very good operator of all your various machines.
I've enjoyed numerous hours watching your videos over the years and you continue to amaze with some of your methods and always do a top shelf job with the tree work, excavation and finish grading. Be safe out there !!
L
For someone like me that has never driven a bobcat, the different POV angles you do are gold! Amazing job you have. 👍
LOL, looks like a 5 in one would be better. The extra function being a bigger bobcat :)
someone said it thank you!
16:30 awesome display of how heavy this stuff is and how quickly gravity can get out of control. Really great video as usual 😎 👍
You put your heart and soul into this challenge.
We love challenge.
You're a good young man, American. Why?
You love to hustle.
That is what we are made of.
I Spent a month researching 4n1 buckets to get a medium duty light enough for my compact tractor, I purchased a construction attachments cmp 4n1 bucket 610 lbs 66” wide. It works great. I like your work thank you for sharing.
It's the same with many tools that do multiple jobs they don't do everything well, there is probably a way that you could improve that bucket yourself once you get to know it better, I've seen what you can do in your videos and your a very resourceful guy
You're a very humble and kind man, not give the company any hard time deliver this bucket. If they where descent, they will refund you instantly without any further discussion. Love your vids! :)
Hey check your hydro oil level, most attachments ship with no oil in them, and when you hook it up for the first time it sucks all your oil and runs it low
Definitely sounds like it's low on hydro oil - those pumps don't otherwise squeal like that. Ask me how I know, lol.
I was on the fence buying the 72" titan for my 743b. This helped me decide. Thank you!
You probably didn’t after watching this.
@@AndrewCamarata correct. I know it's an older video but it saved my ass. I'm now looking at buckets with 2.5" and 3" diamiter cylinders. Thanks Andrew!
The 4 in 1 thing is worthless, get a normal bucket, a demo grapple bucket, and a root grapple bucket.
That smaller machine needs a 5' bucket. That 6' bucket is entirely too big for the machine.I've always used the clam shell buckets for loading gravel and sand, as you've found out it doesn't work too well for wet dirt. Maybe it's time for a bigger machine for the bucket? LOL
Check your Hydraulic pressures.
Could also have bad cylinders, that could be option. Call manufacturers. About your issues.
Also Andrew recommended checking your quick change Couplers, they can restrict flow to your Hydraulic Cylinders. Easy try direct strait lines with out quick change system.
I have owned several bobcats over the years. The buckets generally are the same width as the outside width of the wheels. Anything larger in bucket size creates balance issues, making the machine tippy when bucket is loaded. Also the hydraulic pumps are sized to the machine and certain implements will not operate properly unless pump is compatible. The first bucket was for light materials, i.e. mulch, maybe snow and thats it. It will work on the 743 for those materials and not cause balance problems. The 4/1 is what it is. The pump on the 743 probably did not have high enough psi. I think if you check the pump ratings on your two bobcats this will be why it works on one and not the other.
Andrew, to help manage the extra hose length: Shoup Farm equipment ( google their website) sells a spring steel hose support/ standoff real cheap. It will hold hoses routed up off the top of the bucket and allow the hose to slide through and return. Keeps it from getting pinched when you dump and curl the bucket. Welds to upper edge. I have one on my CTL attachments. Saves hoses and lost work time. Can send you a photo if you wish.
Hose Holder
PART #FH25
Price: $17.95
Thank you for an excellent review on the four and one bucket. I wasn't planning on getting one but if I ever think about it I'll remember you and how you saved me some aggravation and money.
I really enjoy your videos. You don't hide very much like a lot of other video editing. We can all see the difficulty and how it really isn't as easy as it looks in some of those other videos. Thank you!
Just a layman, but learning alot from your videos! Thank you for taking your time to share your wisdom.
The bridge project is my favorite of them all. The complete bridge video is really great folks.
I like all the water related projects like the bridge, culverts, ponds and drainage etc.
I work for Bobcat but I don't work where they build the skid steers.I used to build allot of the attachments but they move them around to different states.I am a welder and I build the MX buckets{back hoe} and allot of the different breaker backs components.I also build the dirt and GP buckets.The sides are different but looks like that's a grain bucket.You need a C/I bucket.Its shorter in depth{blade to back}And it's built tough and made for digging in dirt.C/I stands for construction industrial encase you didn't know.
i'm glad you chimed in. do you know if people add counterweights to the small skid steers? it appears they're not designed for it but... i was wondering if the rear chassis would have room to weld on a mounting bracket to support a counterweight frame. with 200kg hanging off the back, andrew would get the stability he needs.
@@bashisobsolete.pythonismyn6321 I don't think it's possible to add weights in the rear.There is a door on the rear for back of engine access.That is an old style of Bobcat.Probably when it was Melroe Bobcat.Then they were Ingersoll Rand.Now they are Doosan as of 2008-9,can't remember which year.
@@bashisobsolete.pythonismyn6321 SAw a BObcat type rig recently that had a weight apparatus attached to its sides near the rear.
You are showing us the limits of the Bobcat so no one else has to go through this. You are a Saint!
Don't get me wrong, Bobcats are awesome machines.
Great video Andrew, Well edited with some great points about the bucket you selected and the pros and cons of the design. keep up the great videos, take care.
I have the same size four in one bucket as you have here in the uk, and have no problems opening it when full. I can even load big muckaway trucks with ease. Admittedly its not fitted on a Bobcat but on a Thomas loader. Its been an Extremely useful bit of kit and have even demolished large buildings by munching them down with the bucket. I bought this bucket second hand from Versatile Equipment and suspect that part of the problem you have seems to be the way the bucket is balanced. But i know how frustrating these sort of problems can be so good luck with finding a happy solution.
Excellent and informative video Andrew! Definitely food for thought. A bucket like that would be better on the front loader of a backhoe because it would be visible to doze with by the operator and would increase the function of an already limited machine. I've seen them on old case backhoes and the clam shell has a spike tooth on each outside side edge, front and back, that helps grab logs etc. Thank you again for the work that went in to making your video.
Have even used my four in one bucket to demolish quite big buildings, gripped the roof and pulled it straight off. Have got video doing it. While i still have the original bucket for my THOMAS Skidsteer i tend to use the four in one bucket for most jobs. Only problem i seem to have is that my bucket only has a straight cutting edge and not teeth, which would sometimes be nice. I bought this bucket as nearly new and it has performed wonderfully.👍🏻👍🏻👍🏻
26:01...My heart stopped! Scarry! Love all the info for DIY! Keep them comming. Tks.
Root Grapple is a good bucket for moving brush and no dirt.Where I work we make these and the Grapple Bucket to move brush and dirt as well.I really do enjoy watching your videos so don't take any of my comments negatively.I don't like seeing after market attachments of Bobcat skid steers.
You should have a mechanic adjust your pressure relief valve. There should be no problem with your machine opening that clam, loaded or not.
Sorry to necro this comment, but watching this later the right thing to do would be to invert the cylinder setup so that the opening action is stronger, powered by the full cylinder bore, and the closing action (which could bend the bucket) has lower force, being reduced by the diameter of the rod.
You’re right ....the rod side has a smaller diameter surface , so less force . Invert the rams :)
@@kevinvermeer9011 The only problem with that approach is that grappling stuff is now even more limited...less squeeze!
Agreed
abmorty p
I bought the same bucket. I wasn't impressed. I ran it on a few jobs and then sold it. Spot on about using it as a dozer blade. I like to see my work. Keep the videos coming!!!
Yeah, I sold that too. Wasn't impressed at all.
As soon as i saw he ordered a 72 for that little machine i was like oh shit this isnt going to go well lol
Small tractor syndrome (Napoleon complex, if you will). Owner trying to make his machine bigger than it is - usually makes the work go slower.
I dont have a Bobcat... I wont ever have a Bobcat but I just watched your whole video! Not sure why, but I really enjoy what you do and you do a great job of sharing the info with us... for that I thank you for taking the time to do your videos!
Love the video- Especially the part with the Hoses- My family owns a hydraulic and industrial hose company out of Medford Massachusetts- So all that hose stuff interest me - And if that shop couldn’t have done the bent tube (we have a day or 2 turn around time on bent tube) you could’ve had them make that section of tube out of hose (run the hose around the tubing and around the bends to get a measurement) and add a little extra length to make up for the bends that way you’d have one continuous hose- I’m guess that’s -12 or -10 JIC thread. It wouldn’t be optimal but it definitely would’ve worked and eliminated having to cut and weld that tube. We do hoses sometimes that way especially if the guy doesn’t want to wait for the bent tube and thinks using hose would work. Great video as usual!
Thanks, good advice. I have replaced pre-bent hoses in the past with rubber. In this case I didn't feel it would have worked because of tight clearances with moving parts. That's why it got fixed the way it did. Its still working well.
Best thing for grading with a loader, is a regular bucket with an extra cutting edge welded under the heel, sticking out one or two inch. Not far enough to hinder the bucket curl when loading from a stockpile but enough to skim dirt both ways.
Huge fan of your channel! I feel like I get so much accomplished watching your content.
Krfffdsc
Ccxbeh
Your one day appraisal is correct I would say as my experience with one of these was about the same. I operated a case with the 4 in 1 and a gannon box scrapper on the rear. I pretty much did all the grading with the gannon and only used the bucket for loading large rocks into a pile. I'm a natural for grading as my bosses all said and the 4in1 just dosen't cut it!
I'll bet that moment at 26:01 made it interesting in the cab of the truck...
I suppose you could call brown stained seats "interesting".
Hello I have a mini skid steer and it came with a 4 in 1 bucket. I used it for a short time till I bought a drop off bucket which I use all the time now. The great part of that bucket is it will dump the dirt on the other side of the truck, which makes it so easy and quick to load the truck. I have four buckets all together and use that one the most.
I don’t know why I love your videos. Thanks.
William Hewitt Me too. He is a kind of Mc Giver . Do you remember?
Same here. He kind of sounds like my little (McGiver) brother or something.
He never swears. Works quietly. I’m wanting to add my own videos but I’d be censored 🤬 gosh darn sum b etc etc. lol
@@johnkruton9708 You can swear as much as you want on youtube
Very clever young bloke . Lots of knowledge . I hate hydraulics too . The amount of hard lines Iv replaced with flex pressure hose . Just like you cut the ends off mig weld them to the new hose fitting . End of problem
You are going to hate that bucket until you put it on a different machine. Also, not a fan of welded on cutting edges. You may want to check your auxiliary hydro pressure by snapping a gauge on your quick connectors.
You used to be a heavy equipment Mechanic Jimmy, what would you say to maybe flipping the bucket open cylinders 180 degrees so instead of opening with the rod end, you're opening with the barrel end so you get the full grunt?
Sandy, if the space allows, I absolutely would. That's a great idea.
Sandy, if Andrew wants me to, I can do the math on it and tell him how much force would be generated with them mounted 180.
The only adverse effects that I could see would be the barrel moving up and down along with the hoses and fittings, as opposed to being stationary, and the clamping force when used as a grapple would be reduced.
For the way Andrew seems to want to use the contraption, I suspect the trade-off between actually being able to open it mid-air and grapple clamping force (which it looks about useless at anyhow) would probably be worth it. At least that's what I'd be doing if it were my bucket.
In 1985 I had a new 743 with the 4-in1. Sweet setup. Not much shovel work when done cleaning up the that.
A bigger Bobcat perhaps
the big svl 90-2 is a huge 90.2 hp skidsteer
Where I work we've got a SVL75 its big enough
And no electric hyraulic controls.
no kubota has heavy duty hydrulic system no electric controls wich my buddy has 2 svl 75-2's wich lifts heavier materials plus kubota skid steer arms are more longer and solid strong stable skidsteers out plus dealers of kubota takes $2500 off
Several months later after Bobcat trouble he says hes going to sell both. Considering Takeguchi (?), well recommended.
When grading with a 4 in 1 tilt open bucket forward drop the front edge of the bucket down to kind of pre grade the material. A little playing around and it will become second nature. Also using a 4 in 1 on a pile of dirt sometimes is easier to approach pile bucket open and fill via pulling back from the top, a lot easier on the machine as you are not asking the machine to move the unmovable.
Very well edited video
I have an original 60" Bobcat brand 4in1 on my 743.
Opens and closes with anything in the bucket.
Bites a 2x4 in half with jaw.
A touch heavy to load wet material at full height but 1000% better than the thing you bought.
Looks like teeth were an afterthought on yours, they should always be at full width of bucket angled a few degrees outwards.
I honestly think you will learn to hate that thing in no-time.
Hopefully the cutting edges are all easily replaceable like they are on the Bobcat brand, once you wear the heel down from dozing the bucket will leak material.
Sometimes "cheap" stuff on ebay is exactly that.......
Great video and good luck :)
To fix the bucket opening problem, cut the yokes off the bucket along the welds and weld them on slightly tipped backwards. It won't open as far but it would make it work for what you want. It will only cost you time and welding materials
I thought of that too. It would change the leverage point giving the cylinder more mechanical advantage
I would move the cyliners back but I would make a leverage arm. That would increase the ram power cosniderably.
Yes a smaller bucket or more horsepower. I have a 1989 743 I love it 31 years and running strong, I use it under houses took off cage to make low profile..
It's the geometry , the way the cylinders are mounted ! They are mounted to squeeze , not to open up loaded !
Huck Miller yes. Move the pins backward about 3” and possibly get bigger cylinders.
More leverage is more leverage. Weak opening doesn't mean strong clamping. It's the same cylinders on the same bucket in the same orientation. More opening strength means more clamping strength.
mwilliamshs when you push a car out of the ditch , do you push on the side or the back ? I. I the top of the Eyes is max push . As it rolls over , the push diminishes , because it shortens the leverage !
So the difference you're referring to, the highest concentration of force within the pin's circumference, is less than 3/4" from its polar opposite. You really think 3/4" of bias toward pinch vs open is significant?
mwilliamshs no that is not what I'm saying .
Ive been watchimg your video again and thinking this bucket must not have big enough cylinders on it. Because I've had a 743, 863, T300, T190, T770 and a T870 all with 4 in 1 buckets with no issues with opening. The buckets were bought for the machine at bobcat though. My Cat 299 has a 4 in 1 now with no issues as well. I have to have one for grading up around garages etc. paving. Loading is so much easier with one as well. I can pile my tri axles to the brim.
The arm beyond the hinge on the bucket that connects to the top of the hydraulic cylinder needs to be longer. It's not using the advantages of a lever.
Great show.
We have 2 medium and 1 large skid-steers (wheel loaders) made by New Holland. They'll lift the back of a Ford F150 off the ground. They will actually lift more then they can move. Very strong hydraulics. If we ever got another machine, I would love to try a JCB.! Trax are nice (floatation) but tires seem quicker and way cheaper and less parts to wear out.
I like your channel.!
For the hearing impaired would be nice to have transcript in description. Love your videos. I purchased a Demo Dozer for my skid loader, a friend's recommendation.
There is cc available on most RUclips vids now.
The algorithm recommended this one to my - LOL. You've come a long way Andrew.
And watch those hoses. Run them up through the ring on the side of the arm. Sometimes you have to twist them around to get the loop up in the air.
I own a Napa store and we make hoses and those bobcat style with the metal tubing are a pain in the ass....but you sure have eliminated that pain. Now I know what to tell my customers if the have a welder 👍🏻
highly recommend getting a heavy duty strap instead of a chain for pulling.
Too much of a shock load with a chain.
ditto, just watch the fail channels that have episodes including chain breaks: Human injuries; broken glass; free of charge body modification (auto)...
or place an old tire in between -------O------- that will take the shock/stress out of the pull................
Plus you usually end up with all of your limbs if it happens to snap and hit you
@@leewaytoo Great idea.
@@retiredinbali9565 thank you.... growing up in Alaska, sometimes one gets stuck during break up in the spring.... older sourdoughs taught us young pups that means to avoid the shock to either vehicle.
I am a huge fan of your channel sir...I watch every video you post and learn so much from them. I am far from an expert on anything compared you, but I am have the same exact 4 in 1 from Titan on my 763 and it opens and closes with extreme force. I can actually crush metal with it! I would call Titan directly and see what they say. I have called them before with questions/issues with other products I purchased from them and they have either helped troubleshoot the issue or replaced the item
another great video, thanks for sharing
Brother you really need counter weights on all your machines they make a world of a difference , never had a problem loading the hell out of my half yard bucket on the John deer skid steer , very stable with counter weights on the back
Kind of like a mail order bride, she might look pretty good in a picture but you don't know what you have till after the marriage.
Charles Shanafelt. Especially when she wont spread open under load...
Charles Shanafelt It’s not the same to see her in the street than living with her
Huh?
Charles Shanafelt g
Charles Shanafelt
Wow! Been following for a few months. Kudos!! You've hit the sweet spot, But for us non-wrenchers can you explain a little more about things like how hydraulics work before you fix the hydraulics? Love that you're staying with your down home roots. Best advice I ever got in my life is "You're never as good as or as bad as you think you are." Love it. Can't wait for your next installment.
Congratulations with your new 4 in 1 bucket, thank you for sharing your amazing video
Carsten
I have the same exact hydraulic leak on my 742, gonna try welding a new fitting on the metal line too. Great Idea!
I have a 4in1 bucket on my cat 420dit. The thing is great for claming up the last load of dirt .
Stops you from chasing it around.
I found with a 4in1 bucket for grading to make work easier I would open up the bucket and roll it forward, so that the back side of the front part of the bucket with the teeth was in contact with what ever I am grading off. As aposed to opening up the bucket and using the front bottom side of the back part of the bucket as like you were using.
Not sure if this makes 100% sense to everyone or not but this is how I use a 4in1 bucket for grading off
Use it to make you happy but for the most part you have better control grading with the dozer blade.
Good demo
I'd weld several (3 or 4) close overlapping long teeth which are slightly above and angled upwards on the inside join between the bucket and the blade to be able to grapple things better when the bucket is full open. Make sure to weld them in place above the blade cut line so that your blading runs are still smooth. It might make for picking up stumps and brush much easier.
Operator problems, Spend allot more time with the bucket and you will get better, Grapple is totally different in both operational design, it would be like you comparing the Grapple for picking up dirt to the dirt Bucket, Here in Australia No machines are bought with GP buckets, With 4 In 1's we use Spreader bars and this leaves your machines for Dead, you will bend the floor of 4 in 1's in picking up large Rocks, Good Quality Buckets here won't bend but yours doesn't have good enough Cylinders to open or Grab but I would also guess that the hinge points won't work well if the rams were up sized. Your operational skill is not far off from getting much better with it, I can tell you that if you do persevere then you would never go back, But I think in the States from what I have seen is that no one Knows how to use them Correctly so everyone gives up and I would say most are just missing the operational methods by just a little bit. Best of Luck and enjoy you video's
Attitude Adjuster, it's interesting, isn't it? Americans don't seem to use 4 in 1s, and I've very rarely seen a spreader bar being used on any of their machines. Here in Oz, every operator has a 4 in 1 and one correctly sized for the machine, and they mostly do very good work with them. The 4 in 1 which Andrew bought certainly looks too big for that machine.
Right tool for the right job. One thought I had was a quick removable rod mounted to the cage roof with a camera on the end out so you can see the blade. Small tablet with Bluetooth to pick up the camera feed. You could see the action on the blade.
When you are trying to grade with the bulldozer, I was taught to open the bucket most of the way, set the back edge down on the ground and the "front" edge of the clam on the ground level with it, then do your pushing. Much like when you do a back drag to get a scoop but just with both edges on the ground and going forward instead. The way that clamshell is designed, if you back drag over a stump to hard it will bow the middle of the bucket. Those pistons did look a bit to small diameter. If you are yanking small trees out of the ground with it, grab them somewhat centered on where quick attach bracket connects to the bucket, close the clam enough to grip the tree but not cut it off, then drive a bit forward while rolling the bucket back and up. Also for the bulldozer blade, you just have to get the hang of where the blade is by looking at where the back of the bucket is touching the ground. On the Takeuchi I used, you could tell by looking at the outsides of the quick attach at the ground. I am an expert with the machine by no means, but I hope these words help. you may have bought a bucket that is just a bit to big even for your tracked machine. perhaps you don't have enough hydraulic pressure for what is needed for that bucket? letsdig18 has some videos of grading like I mentioned too, if you want to look them up on here.
I had a 738 like that all they are good for is cleaning out chicken houses ,mulch or a backhoe attachment . The wheel base is too close together and it stayed on the front wheels or the back wheels all the time . Glad I got rid of it . . The 864 you got is a great machine its strong not to have a turbo on it .
He wasnt stuck, just couldnt move
You just got to get use to it. I don’t have problems like you. If you’re moving a lot of rubbish or brush you need a different buckets but with dirt or gravel the 4 in 1 is the one you really want.
That bucket is too heavy for the 743B. The 864 should open it with no issue, I think the bucket pistons are too weak, as you mentioned in the video they’re undersized. I have an 843 and use the 4 in 1 and even with wet sticky clay it opens right up. Just be cautious of your tracks, the bucket is too narrow and you could damage the sides of the tracks. Best of luck to you, keep the vids coming they’re great.
p191919191991919191199119919119199191919191919919191191991191919
1191911919199191919191919191919191919191911q0
Concrete and Construction 1
In the future you need to change out hydraulic pumps to higher out put pumps to operate those types of implements when pumps need have issues.
You gave me a bit of a scare when you started to dump your truck on a slant at the bridge, see about the 26:00 minute mark.
I'm thinking that you'll 'get the hang of it' with more practice. Different tools for different job, I guess Andrew!
Great bucket for building and grading roads, clearing also.
I was thinking the dirt looked like it was moist and sticky. then you did say that.
The 4 in 1 bucket is a good tool on the job site try opening the clam only about 4 to 5 in when using the Dozer blade drag the back of the clam will only allow your Dozer blade to cut so much at a time it won't go gouge in and it works or like a scrapers the dirt will roll forward and fill the bottom sorta like a scraper pan
Hello from Victoria Australia, I seen it, hard to believe, good one.
I had a 4in1 bucket for my mini skid steer. I was so happy when I got that bucket, used it a few times and never used it again. It just didn’t do what I thought it would do. So after that I bought a hydraulic drop off bucket. With that bucket I could dump the load on the other side of the truck and be able to fill the hole truck from one side to the other.
i think with you're fabrication skills you should make a cam bucket you're welding is good
Here in the uk I have a four in one bucket on my THOMAS Skidsteer and find it VERY useful👍🏻 no problems opening it at all. Find that i can load large muckaway trucks with it even when full right up, even reaching right up to get over the sides. Not sure what make it is but think your smaller Bobcat machine is the prob not the bucket👍🏻👍🏻🥴
Can you bump up the hydraulic pressure on that smaller machine without breaking anything? Since the machine is old, do you think the pumps are worn out? That new bucket looks like it works well for grading. Good honest review on this bucket.
On the 863 I was using and on the 443 I welded Chain hooks on the Arm towers. I then could hang the solid tires we have for the 863 for counter weight. I could use 2 on the 443 to counter balance. The relief valves for the Aux hydraulics can be made to go higher in pressure.
Another good video buddy haven't you made enough from RUclips to go buy a new 4 wheel drive dump truck lol
You've got it right; when your equipment is down, you make no money so when it is down, take care of everything you can. Keep a notebook: 1) must be done, 2) should be done, 3) when you have some money to play with. And keep a maintenance log on all the equipment. This let's you look forward and back.
The buckets you bought: could it be that you haven't greased everything or you need a hydraulic pump that will operate at higher pressure. Good lesson for me. My son has been encouraged by some of his neighbors to start a small "dirt" business. With the loads he hauls, he cannot haul the day before a national holiday or the day after. So he thinks he will get a CAT skid-steer, since he used to rebuild and flip them. But I was hesitant until I saw you with that clam shell. A well used dual axle dump truck a mid sized excavator, a dual axle trailer and a skid steer. Hauling the equipment on a trailer designed for 55 tons with a four axle truck is a bit of overkill. So your video, as usual, was very helpful.
I'm 99% sure its your skid steer not the bucket....
that bucket would work on a ssv or svl 75-2 and svl90-2 skidsteer loader the ssv and svl 's has 100% more lifting compastity and made sterdy solid
Pretty sure most of yall commenting didn't watch the entire video
No it's the bucket it should of opened with the small machine with a full load bit the piston are to small and tjere not placed right
Leverage trumps all. Just one inch would have made all the difference in the world here. One inch larger diameter piston, or if the bolt hole on the armature that controlled the bucket were placed 1 inch further out the bobcat would have more than enough power to power it.
But that bucket was obviously designed for the larger models. If the manufacturer had done their homework they could have listed what PSI range the bucket works best with. Maybe they did, idk I wasn't there. Maybe Andrews old bobcat has a worn hydraulic pump, maybe his pressure regulator is set too low or is faulty.
These machines should be able to lift enough to make them tip over and he isn't even coming close to doing that in this video.
Maybe Andrew missed to ask or maybe the salesman missed to inform him about what kind of machines this bucket is designed for.
We have a big machine now but we looked at a bunch of different grapples before buying, its a toss up between heavy enough to last and so heavy it cuts lifting capacity in half. We ordered a little wider to help keep brush off the cab when pushing up
So you still have the old house in addition to the castle? I thought you had moved, but you show both properties here. Completely off-topic, but just curious.
bobcat 743 is a good machine to push snow around and some light stuff we had a 753 around the shop but for earth moving and other bigger jobs you need to invest into bit bigger unit . we sold ours and purchase S770 high flow night and day can lift 2500LBS+ with no problem.
Ha! ha! love it man, warts and all. Hey, I've NEVER gotten stuck on a job site...... (At least not on video, because I'm perfect..... ;-)
Seriously though, I feel your pain with the loader, my little kubota is limited like that with even a one ton. (EDIT: Oh, and when it wouldn't open in the air, well done not dropping F-bombs like I would have......)
JimsEquipmentShed.
Ml0
Hey Andrew absolutely love your videos. I have started my own excavating business partial credit to you and a few other youtubers for giving me the motivation to just go for it. I too just redid all my drive motor lines on my 1994 743b. I went with compression fittings and all went well. Never thought of welding them but dont see why it would be an issue.
Yeah, good to hear. That thing isn't leaking now.
4:50 - When the guy realizes it's Andrew Camarata picking up his part.
ANDREW your definitely talented young man, and amazing WATCHING your SKILLS and how well you able to improvise and make SURE that it'll work, thanks for sharing your thoughts and talents and SKILLS
dump a pile next to the truck
to drive up on
for higher loading.
I remember guys doing that! It works! (Been decades since I worked construction).
I owned a 634 and an 853 - we had practically every attachment you could get,inc backhoes for both machines, and we used the Bobcats daily for everything imaginable. Loved them. Did NOT love the 4-way bucket for loading trucks, even on the 853 (which also had the high output hydraulics). Problem- yeah you gain a little height, but you lose capacity BC of the weight, and worse , you lose the length so you have to be tight against the truck, and then you’re dumping right next to the inside of the rail, so after a few scoops it’s the same old problem. As a dozer or grapple it also sucked. Bottom line nobody liked the 4-way and the only thing we used it for was spreading gravel. Exact same experience you had. Ours was Melroe branded and was plenty rugged.
Yeah, I tried to like it. I ended up selling it though.