Mplus Amazon roadside impact wrench tool review. Product link: amzn.to/2S5Wnvh As an Amazon Associate I earn from qualifying purchases. #impactwrench #tools
I have a similar impact as well that I got from amazon and I keep it the car because I don’t want to leave my m12 stubby in the car to get stolen or have to worry about the chance that one day the battery may blow up in the heat. I’m very impressed what these corded 12 volt impact can do. I’ll never have to worry about battery when I’m on a road trip. These will do great for emergency when needed and you don’t even build up a sweat.
I got one similar at walmart 10 years ago and it claims 250ft lb. It is surprisingly powerful! A bit slower but it gets the hard part done. In about 2 smacks it has 85 ft lb lugs loose! Also on the one I have it seems more powerful with the engine running and 14+ volts.
Wow that thing works pretty darn well. I like the action of the hammer mechanism, it's like the motor winds up and then the hammer delivers a sharp impact. I like what you said "mplus don't care about your stake". Lol it zipped that axle off pretty easy! Great video man 👍. Would like to see the max torque capability with a torque wrench setting up each fastener that's tested (kinda like how koon trucking does it on his channel). That would help eliminate some of the people thinking the fasteners were pre adjusted so they easily come off.
i love how it run fast first then hammering the nut.it create strong momentum. it difference then dewalt or others that impacting all the time that quickly wear the hammer.
Looks like a very confused hand mixer! I like it for emergency use. Looking back I would have loved this when I was younger. As good as cordless, goes anywhere my jeep could go.
I just sent this exact impact wrench back. It took the lugs off on my first tire with ease. On the second tire it broke and made an ungodly racket after that.
Probably parts were made too hard. I always release the switch with every impact and wait for it to stop spinning (I think that's what manual tells to do), should reduce the wear.
Torque test channel did review this on over if his videos, that's pretty ingenious and quite impressive, of course, there's a risk of will die on you at the most inopportune moment so having a manual backup is advisable. I've of his died (to be fair, it was the 12v plug that died on him, the tool itself worked fine)
I like the extended anvil I don't get why they aren't more common in higher end impacts. Makes lugs easier when you have deep offset rims. Although on this tool I assume it's there just because it's oriented like a cake mixer 😂
@@kickboxs77 the one I had showed a really loose fit of the sockets to the drive anvil of the wrench; is that how it was intended to be? A sloppy fit like that would increase the impact force by allowing greater wind up and slapping force, but couldn't be good for longevity.
It’s because people want them to be as small as possible to fit in tight spaces. If you want it longer you can use an extension or deep socket. If you want it shorter you can’t just shorten the anvil.
How much current does it draw when operating? Doesn't seem like it'd be too much, so a small portable SLA battery jump pack could be used for a convenient power source.
It’s pretty good. No need for a high torque expensive impact wrench. Maybe the cordless tool makers could try the motor in that on some of their tools.
So it's you who stole my wheels and left the car standing on bricks!!! Joking aside it did the business on that axle nut!!! Not bad for a plasticy looking thing!! 👍😎❤️
Looks really good but I wouldn’t use it on locking wheel nuts especially Peugeot locking wheel nuts it will destroy them there not the strongest at the best of times
Awesome kit for the car, i definately wouldnt leave my ridgid 5x impact and battery just sitting in the trunk. Good for average folks who dont own power tools.. The bpm maybe less but more concussive force per blow.
That little tool there at first I said cheap looking them don’t work once you put it to a test I was like damm a must have on all cars for a flat will be on the road quick.
Hope you can help. I press the button and hold the socket.Motor inside turning but socket doesn't turn. Can stop it with my hand easy. No power. Am I doing this wrong
I read a lot of reviews that The build quality is terrible on these....I like the concept and design...But after a few uses they'll literally blow apart....same as the electric jack....A lot of these companies are guilty from deleting a lot of problematic comments......
@SinsBird And hook it up to 20v and keep the trigger held down just to see how far it will go....which is apparently at least 500 ft-lbs before the motor goes.
@@SinsBird Brother, I just worried for your safety and other People watching! You can also mess up your bearing coming loose like mine did $105 latter for a new bearing hub! Most of the axle nut says one time use on them. It's an Awesome Video! Best Regards!
Longevity is key, I wonder how long this thing would last in automotive use, probably a week. But yea if you just need something to get the job done once in a while not the worst idea.
Defenitiv not for daily use but seems great for the once a year rusted bolt or for your grandparents to change a flat tire. I probabĺy buy one to get the nut of the belt clutch from my ATV off
Hi can I get a tow truck I'm in middle of the highway in my wheel came off o dont know 🤷♂️🤔why RUclipsr be like I forgot to tight my neighbor wheel nuts🤦🏻♂️🤦🏻♂️🤦🏻♂️ 😅😅😅😂😅😂😂😂😂😅
Like and subscribe and click bell to get notifications👍👍
Kawasaki 12v Impact wrench couldn't remove axle nut ruclips.net/video/8PlwExnTopg/видео.html
Kawasaki 12v has to be the worst, has a mind of it's own works when it wants to, threw it in the trash.
That blender has some power 😂😂🔩🔧👍
I thought it's a cake mixer
Looks ugly
Lol 🤣 cake mix
Dude that’s one hell of a cake mixer 🤣
Вот,а я о чем-у кондитеров такой же,только белый или розовый и с другой насадкой
thats a more powerful one than i have coz it does 1 blow and takes off
I have a similar impact as well that I got from amazon and I keep it the car because I don’t want to leave my m12 stubby in the car to get stolen or have to worry about the chance that one day the battery may blow up in the heat. I’m very impressed what these corded 12 volt impact can do. I’ll never have to worry about battery when I’m on a road trip. These will do great for emergency when needed and you don’t even build up a sweat.
Wow, that’s so nice…the impacts are fast but they are heavy and effective. I’m impressed.
I got one similar at walmart 10 years ago and it claims 250ft lb. It is surprisingly powerful! A bit slower but it gets the hard part done. In about 2 smacks it has 85 ft lb lugs loose! Also on the one I have it seems more powerful with the engine running and 14+ volts.
I'm impressed didn't think it would be that good.👍
Wow that thing works pretty darn well. I like the action of the hammer mechanism, it's like the motor winds up and then the hammer delivers a sharp impact. I like what you said "mplus don't care about your stake". Lol it zipped that axle off pretty easy! Great video man 👍. Would like to see the max torque capability with a torque wrench setting up each fastener that's tested (kinda like how koon trucking does it on his channel). That would help eliminate some of the people thinking the fasteners were pre adjusted so they easily come off.
True test would be a Honda crank bolt, but that's a tight spot.
i love how it run fast first then hammering the nut.it create strong momentum. it difference then dewalt or others that impacting all the time that quickly wear the hammer.
Good demo better and quicker than using wrench in bad weather when changing a flat tyre gets the job done 👍
Let loose in the public car park with a impact wrench.🤣👍
I love when people buy tools and just randomly start popping bolts off their cars.
lol its actually very satisfying especially when the bolts are old and rusty
When I got my first torque wrench I just had to loosen all the bolts I can find and just torque them on whatever number came to mind
@@powershot9933 well hell yeh, you have to test that bad boy out right ?
Looks like a very confused hand mixer! I like it for emergency use. Looking back I would have loved this when I was younger. As good as cordless, goes anywhere my jeep could go.
8:30 "...Damn!" 😶😮
That's what I said too man! Those boys are supposed to be held on super tight! Very impressed! 😃🌎
Impressive stuff 👏
so impresive!
I'm impressed with the power!
its inertia, not power.
Works well, I would buy one for the car.
Surprising item
Well price to power ratio probably beats anything on the market lmao nice video little thing goter done.
wtf? it works! works very good! :O
I just sent this exact impact wrench back. It took the lugs off on my first tire with ease. On the second tire it broke and made an ungodly racket after that.
Probably parts were made too hard. I always release the switch with every impact and wait for it to stop spinning (I think that's what manual tells to do), should reduce the wear.
Impressive for something that look like a kitchen appliance
thats insane men je je, good tool
I watched the milwaukee one as well u said u didn't have the stuff to do it so u just sent it and it worked weirdest thing every man
I seen the Honda crank pulley video first, but wow this is very impressive.
Torque test channel did review this on over if his videos, that's pretty ingenious and quite impressive, of course, there's a risk of will die on you at the most inopportune moment so having a manual backup is advisable. I've of his died (to be fair, it was the 12v plug that died on him, the tool itself worked fine)
Great tool it seems.
I like the extended anvil I don't get why they aren't more common in higher end impacts. Makes lugs easier when you have deep offset rims. Although on this tool I assume it's there just because it's oriented like a cake mixer 😂
Torque is lost with extended anvil.
@@mu9900 You are incorrect-flexion, pretty basic stuff.
It’s so they can use the reversible sockets that come in the kit
@@kickboxs77 the one I had showed a really loose fit of the sockets to the drive anvil of the wrench; is that how it was intended to be?
A sloppy fit like that would increase the impact force by allowing greater wind up and slapping force, but couldn't be good for longevity.
It’s because people want them to be as small as possible to fit in tight spaces. If you want it longer you can use an extension or deep socket. If you want it shorter you can’t just shorten the anvil.
How much current does it draw when operating? Doesn't seem like it'd be too much, so a small portable SLA battery jump pack could be used for a convenient power source.
You can use anything see ruclips.net/video/N8Z_KcQdIuM/видео.html
try it on a scissor jack. wonder how it would work.
Oh....impresionante!!!!
It’s pretty good. No need for a high torque expensive impact wrench. Maybe the cordless tool makers could try the motor in that on some of their tools.
So it's you who stole my wheels and left the car standing on bricks!!! Joking aside it did the business on that axle nut!!! Not bad for a plasticy looking thing!! 👍😎❤️
I know who you are now! You’re other channel is Drive Manual, you teach us how to drive manual in the snow
Ya, the wrapped up shoe on some of his videos gives it away 😂🤣😂
The damn things like 60bpm, but it just does it! No questions asked. I could have used the hell out of this 2005-2015!
Looks really good but I wouldn’t use it on locking wheel nuts especially Peugeot locking wheel nuts it will destroy them there not the strongest at the best of times
I have Milwaukee 2767 & IR W7152 & I ain't never unstaked a axle nut & I've never come across one I couldn't take off with my two impacts
Yeah but jorge mcfly said it has more torque than does😂😂😂😂
Awesome kit for the car, i definately wouldnt leave my ridgid 5x impact and battery just sitting in the trunk. Good for average folks who dont own power tools..
The bpm maybe less but more concussive force per blow.
That little tool there at first I said cheap looking them don’t work once you put it to a test I was like damm a must have on all cars for a flat will be on the road quick.
Hej. Still on duty? Or already on trash dump?
Hope you can help. I press the button and hold the socket.Motor inside turning but socket doesn't turn.
Can stop it with my hand easy. No power. Am I doing this wrong
Hi if u hold in air not holding socket does it wind up then hit ?
@@singlecams
It's not air it's electric powered by the vevor power box.
@@keifer242 can u post video 🤔
I want to buy
Sold !!!😳
Awesome lol
Weird. Link goes to the Impact, but the reviews are for the hydrolic.
Good video. Never need to worry about the battery charge on this unit!
Right goes anywhere the Jeep goes!
I read a lot of reviews that The build quality is terrible on these....I like the concept and design...But after a few uses they'll literally blow apart....same as the electric jack....A lot of these companies are guilty from deleting a lot of problematic comments......
"the milwake user say" lololololol
So the mplus it has more torque than milwaukee?
Yes, no doubt.
Wow, not bad!
i am impressed enough to call these ELECTRIC IMPACT WRENCHES
Sounds like it’s using a flywheel. Similar tech as the yellow and teal electric nail guns.
U can see inside on the next video
How many times before that hammer destroys the motor?
I don't think you understand how it works. The only time the motor is loaded is when it's spinning up.
@SinsBird And hook it up to 20v and keep the trigger held down just to see how far it will go....which is apparently at least 500 ft-lbs before the motor goes.
You sound Ike George mcfly
😂 ,,, back to the pass
Axle nuts are a one time use!
Why so?
@@SinsBird Brother, I just worried for your safety and other People watching! You can also mess up your bearing coming loose like mine did $105 latter for a new bearing hub! Most of the axle nut says one time use on them. It's an Awesome Video! Best Regards!
I ordered this jack on 4/22/2021 and haven't heard anything yet.Can someone email me for further help ?
Oh sorry I'm not sure maybe u can cancel order shouldnt take so long 😮
Where did you buy it?
Longevity is key, I wonder how long this thing would last in automotive use, probably a week. But yea if you just need something to get the job done once in a while not the worst idea.
U can see inside it already blew (but I did put 20v to it😊😆 ) good thing is u can just fix it with a paperclip and duct tape probably lol.
Defenitiv not for daily use but seems great for the once a year rusted bolt or for your grandparents to change a flat tire.
I probabĺy buy one to get the nut of the belt clutch from my ATV off
Can't find it on Amazon.
Where to buy & cost?
amzn.to/3qaM1bR
Aliexpress, it's around $50
@@SinsBird Have you put this to the test on Honda's Crankshaft Bolt?
@@angelisone No, but it should be able to do it I think.
Mplus no longer available wonder why?
You can find it on aliexpress, type 480n 12v.
@@SinsBird ah, thank you!
There is cordless impacts that make much easier the job
someone who just needs to take a couple of lug nuts off when they have a puncture etc, is not going to bother investing in a cordless tool for it.
I am surprised at the torque value of that "cake mixer". I don't like the look of it at all, but Hey it works.
看起来就像里面有一把锤子...
That's a long torque wrench be like 24 inches
He got a tool so he wants to unbolt as many bolts as he can.
Mplus BEATS the little milwaukee then... hahha
Damm this guy is going around and losing up bolts , lol,
Looks like a whisker lol
Hi can I get a tow truck I'm in middle of the highway in my wheel came off o dont know 🤷♂️🤔why
RUclipsr be like I forgot to tight my neighbor wheel nuts🤦🏻♂️🤦🏻♂️🤦🏻♂️
😅😅😅😂😅😂😂😂😂😅
That motor inthe impact is weak good for Subarus
Lol I cant tell if this is like a joke and he righted every thing down to like 25 foot pounds
This impact is rated at 480NM = 350ft-lbs of torque
@@singlecams lol that's pretty crazy my ryobi only dose 300 fp
From 12v, that's incredible.
You should see his 12v battery pack conversation of that tool. He really turns it into a Beast. 🌎
😂😂😂😂😂😂😂😅
Sure glad you told me to unlatch the latches. Stupid, just stupid. How in the hell would you open the case without unlatching the latches?
Why are you so hostile
That is a Goofy sounding and ugly tool, however it seems to get the job done.
Игрушка для 🤣🤣🤣🤣
Head over to that crank bolt a Pitman bolt
🛑🛑🛑🛑🛑🛑it is fake dont buy that. Take a closer look ❌❌❌❌
Don't compared to Milwaukee that thing is junk
Somebodys mad there Milwaukee got showed up by a cake mixer
It's only junk if it doesn't do the job
And a fraction of the cost.
Not supposed to be used like a Milwaukee with a heavy duty cycle. It only aught to be brought out if the Milwaukee and cheater bar can't do the job.