Leica Disto S910: 3D Measurements
HTML-код
- Опубликовано: 25 авг 2024
- In this video we're showing how to use the angle measurement tool and how to put a building directly in a 3D drawing with a Leica Disto S910!
Check out this Leica Disto S910 in our webshop: www.hst.be/afs...
Our webshop: www.hst.be/web...
Our Facebookpage: / hstbvba
Our Twitter: / hstbvba
---------------------------------------------------------------------------------------------
In deze video tonen we hoe jullie hoe de hoekmetingsfunctie en 3D functie werken met de Leica Disto S910! Twee zeer handige toepassingen van deze afstandsmeter!
Bekijk deze Leica Disto S910 in onze webshop: www.hst.be/afs...
Onze webshop: www.hst.be/web...
Onze Facebookpage: / hstbvba
Onze Twitter: / hstbvba
Nice Video.Leica Disto S910 is really unique.The most efficient measuring without any risk!
thank you for this video
this seems to just measure between two points. I could not find any accuracy statements to horizontal bearings, so I don't think it can locate points in the XYZ axis'...just simply the distance between two points. The device has a tilt sensor, but not an bearing sensor. I could be wrong, because if so, this tool could be very helpful. Please let me know
Una presa in giro.... per i topografi.
How do I get it to "talk" to my bluetooth 2.0 data collectors?
good!
Soy Ecuatoriano quiero saber lo siguiente: Si con Leica Disto S910 se puede partir con coordenadas dentro de galeris subterraneas?
Que tal amigo, disculpa adquiriste este equipo?
how to congregate different set of points into single file in AutoCAD for the same building, since u cant map more than 20 points in one set
Hi Tapan,
You have to worke wit 2 reference points.
In your first job, there has to be 2 points which you can also measure from your second position.
In your second job, you measure those 2 reference points again.
Now you have 2 different drawings, but those 2 reference points are the same.
THey are common in the 2 drawings.
You can now copy all your points from the second job, and paste them on the first job, by using those 2 reference points.
You can do this easily in a CAD program like Autocad, BricsCad, Vectorworks, etc..
I hope I have helped you out with this issue. Good luck.
Rob, HST
thank U. I discovered the same in Leica s910 manual for Relocation
+HST bvba apnar nambar pizz amar akta app banea den
+HST bvba আপনের নাম্বারর দিন
Don’t expect the Bluetooth to work. It does not. It has never worked for me. Think twice before buying this. Leica is no help either.