of all videos I watched on this topic, this was the most comprehensive. My setup worked like a charm thanks to your guidance. Well done and keep them coming!
good tutorial! the bit about the Proxmox OpenVPN documentation helped me with my unprivileged container. One thing to note is that since WireGuard uses UDP, the default port is typically acceptable since it will not respond to unauthenticated requests.
I made a test of wireguard in a kubernetes cluster but was not super happy with that, so I tried in an lxc container and was struggling with the turnkey template when I watched your video you saved my day :) I put the turnkey to the garbage and start from a fresh vanilla os with the script of Nyrt, it works well. Many thanks for your content, I enjoyed it :)
Thanks so much for this mate. I have been re-organising my homelab and wanted to get Wireguard up a level into an isolated Proxmox LXC and out of a docker container in a Linux VM. I was stuck until i found this video. Sorted me out a treat. An easy to follow, well structured video. Cheers
I've been trying many options, on my router, openvpn on my server, etc., etc., for a longer time that I'm willing to admit to. Finally bumped into your video (I guess the tech gods were in my favor) and got it done so easily! Thank you! Hope you do some more videos to follow you on
You talking softly (didn't see the "whispering" note) was quite nice cos most homelabbing (creators) guys shout - guess from all the noise in server rooms :) - thx .. very nice video.. plus I've learned something today...
Big thanks!! Actually used your video a few months to configure successfully but something changed on my end so I had to do it again but I didnt remember which video I used. I tried all of the ones from the popular YT but for some reason still couldn't get it working. I finally found yours again and 10 minutes later, I'm back in business! Subbed!
Why did you select DHCP when setting up the container? And why did this work for you instantly? I'm pretty sure I need to set up port forwarding on my router, which I would expect is easier with a static IP.
@@JspectraX I'm guessing you didn't port forward. You have to port forward the specified port for Wireguard. This will allow incoming connection requests from the internet to go straight to WireGuard (so sorry for the extremely late reply, hopefully this can still help someone).
Hi, normally don't comment but wireguard has been the bane of my homelab journey. Always had issues with not being able to access my local apps. I had it working in a VM but I'm trying to use LXCs for everything. This video solved all my problems. Very clear. You mentioned asking for feedback. I'd say your layout worked great and adding chapters is a HUGE plus for me. I think I'd just say improve your lighting and maybe try to project your voice a bit more. I've heard people do this alot cause they're using their indoor voice like being in discord with friends. For clarification you speak very clearly but I feel improving in this area will give your videos more personality. That combined with your concise explanations and straight to the point explaining is what I look for in these sorts of videos. Thanks alot!
Thank you for the kind words!!!! I'm glad I was able to help. Also, I greatly appreciate the feedback. Its interesting, my voice changes the moment there's a camera in front of me. I think its something I still have to get used to if I want to continue making these types of videos (which I do).
This worked great for me on Ubuntu 23.04 lxc container image, thanks. Initially i couldn't get it working because it turned out i was port forwarding to the proxmox host, not the vpn server, as i did not realise the container appeared as a separate client within my routers client list.
Really nice video. I followed everything just link you did. I didnt change the port to avoid any port forwarding. But after creating tunnel in my phone, I am not able to get internet. I tried with default DNS server and the google DNS server on different phones. But same result. About my setup, I have connected one LAN cable from my ISP modem to my mini pc where proxmox and wireguard are running. My phone is still on the ISP modem wifi. The second LAN port on my minipc is not connected to anything. Can you please help?
You have to port forward. You have to port forward the specified port for Wireguard. This will allow incoming connection requests from the internet to go straight to WireGuard. You cannot avoid port forwarding. Hope that helps, let me know if you have any other questions!
@@homelabd oh... Unfortunately my ISP router (Vodafone Germany) doesn't support it. Will try to get a new router and get this one to bridge mode. Thank you for your quick reply :)
@@akhileshsooraj No problem! Yep, I always recommend owning your own router & modem. Most ISP provided equipment have an additional monthly cost to them and are missing key features.
Excellent video. I'm a very old neophyte. Now that wireguard is installed in proxmox and on my phone. What do i do next? I did port forward my port inputted during the configuration to the jellyfin port in truenas Now how do i access the port when i'm away? I think you could add an example of this to your current video for completion sake. Thank you for the excellent presentation
Hey William! On the wireguard app within your phone, you can create your connection via QR code. You can then scan the QR code that is shown within your wireguard installation on proxmox. Then on the mobile app, all you have to do is toggle on the tunnel and you should be connected to your VPN. I showcase this towards the end of the video. Also, thank you for watching!
@@homelabd Many Thanks for your time and prompt reply. Didi all of that.. when i open WG on my phone i toggled the icon to the right. OK. Now i'm away what IP address i insert in my phone's google? I did the port forwarding on my router Again thank you for your help
@@williambravin1254 Sorry, I'm not sure if I understand you correctly. You don't have to insert any IP address into your phone's web browser. Once you are connected to the VPN, you are done. No further steps needed. You can, however, test whether or not you are successfully connected to the VPN. By typing in the IP address of your proxmox server on your phone's preferred browser, you see if you can access your homelab hosted within your network, while you are OUTSIDE the network. For instance, while I am abroad I can simply activate my wireguard VPN on my phone, and access my proxmox virtual environment. I would not be able to do this without direct access to my home network. This is just an example as there are many use-cases. Hopefully that clarifies things.
So I’ve virtualized Opnsense as my firewall on Proxmox and intend to install Wireguard in the same manner as you did. How do I get the OpnSense and Wireguard to communicate though? Through Port Forwarding?
I have been banging my head regarding wire guard. Everything appears to go through except I cant connect to the internet. On the android, it shows Transmitting but not receiving. I dont know whats preventing the hand shake. And yes I have done the port forward on router.
HELP. thank you so much, i ran into an issue during the installation procedure, so I created the container and followed the steps to where you paste Wirguard Get link And I get this message The system does not have the TUN device available. TUN needs to be enabled before running this installer.
I just uploaded a new video! Learn how to build your own website for dirt cheap 😎ruclips.net/video/yIoVjuCiFfs/видео.html
your audio is really really really bad
of all videos I watched on this topic, this was the most comprehensive. My setup worked like a charm thanks to your guidance. Well done and keep them coming!
good tutorial! the bit about the Proxmox OpenVPN documentation helped me with my unprivileged container. One thing to note is that since WireGuard uses UDP, the default port is typically acceptable since it will not respond to unauthenticated requests.
I made a test of wireguard in a kubernetes cluster but was not super happy with that, so I tried in an lxc container and was struggling with the turnkey template when I watched your video you saved my day :) I put the turnkey to the garbage and start from a fresh vanilla os with the script of Nyrt, it works well. Many thanks for your content, I enjoyed it :)
Thanks so much for this mate. I have been re-organising my homelab and wanted to get Wireguard up a level into an isolated Proxmox LXC and out of a docker container in a Linux VM. I was stuck until i found this video. Sorted me out a treat. An easy to follow, well structured video. Cheers
i cant belive ive spent over 5 hours researching how to set up any vpn on my home server, and i just did it in 10 minutes because of you.
Thanks for this. Solved all my wireguard problems in 10 minutes.
this is literally what i needed in one video. thanks bro
Glad I could help!
I've been trying many options, on my router, openvpn on my server, etc., etc., for a longer time that I'm willing to admit to. Finally bumped into your video (I guess the tech gods were in my favor) and got it done so easily! Thank you! Hope you do some more videos to follow you on
Dude, great tutorial thank you
You talking softly (didn't see the "whispering" note) was quite nice cos most homelabbing (creators) guys shout - guess from all the noise in server rooms :) - thx .. very nice video.. plus I've learned something today...
Thanks for putting this guide together, it was super easy to follow. Works perfectly on Ubuntu 23.10!
Big thanks!! Actually used your video a few months to configure successfully but something changed on my end so I had to do it again but I didnt remember which video I used. I tried all of the ones from the popular YT but for some reason still couldn't get it working. I finally found yours again and 10 minutes later, I'm back in business! Subbed!
I just have to thank you, I was looking for a video like this, to be able to do this on my network. I really appreciate it.
Why did you select DHCP when setting up the container?
And why did this work for you instantly? I'm pretty sure I need to set up port forwarding on my router, which I would expect is easier with a static IP.
I did everything but whenever I try to connect to the VPN, it wouldn't let me. On my iPhone it says its connected but won't load anything.
@@JspectraX I'm guessing you didn't port forward. You have to port forward the specified port for Wireguard. This will allow incoming connection requests from the internet to go straight to WireGuard (so sorry for the extremely late reply, hopefully this can still help someone).
wonderful video! also a cs student and am learning quite a bit!
Hi, normally don't comment but wireguard has been the bane of my homelab journey. Always had issues with not being able to access my local apps. I had it working in a VM but I'm trying to use LXCs for everything.
This video solved all my problems. Very clear.
You mentioned asking for feedback. I'd say your layout worked great and adding chapters is a HUGE plus for me. I think I'd just say improve your lighting and maybe try to project your voice a bit more. I've heard people do this alot cause they're using their indoor voice like being in discord with friends. For clarification you speak very clearly but I feel improving in this area will give your videos more personality. That combined with your concise explanations and straight to the point explaining is what I look for in these sorts of videos.
Thanks alot!
Thank you for the kind words!!!! I'm glad I was able to help. Also, I greatly appreciate the feedback. Its interesting, my voice changes the moment there's a camera in front of me. I think its something I still have to get used to if I want to continue making these types of videos (which I do).
Awesome mate! I’ve been trying to setup a home vpn during 1 week😅 and I did it with your video! Thanks a lot!
man this is awesome. thank you so much for all of your help!
Thanks for this video , nice and clean !!
👏🏻👏🏻 thank you. Amazing video !!
This worked great for me on Ubuntu 23.04 lxc container image, thanks. Initially i couldn't get it working because it turned out i was port forwarding to the proxmox host, not the vpn server, as i did not realise the container appeared as a separate client within my routers client list.
Worked Fine Here. Thanks
Great job. keep making these kinds of videos
Great, worked a treat
Please subscribe im almost at 100 subs. I’ve got some videos planned! 😄
Why did you use DHCP? Wouldn't it be better to set a static address if you're port forwarding?
No specific reason for selecting DHCP. I agree, a static address would make more sense.
great effort, thanks for it!
Really nice video. I followed everything just link you did. I didnt change the port to avoid any port forwarding. But after creating tunnel in my phone, I am not able to get internet.
I tried with default DNS server and the google DNS server on different phones. But same result.
About my setup, I have connected one LAN cable from my ISP modem to my mini pc where proxmox and wireguard are running. My phone is still on the ISP modem wifi. The second LAN port on my minipc is not connected to anything.
Can you please help?
You have to port forward. You have to port forward the specified port for Wireguard. This will allow incoming connection requests from the internet to go straight to WireGuard. You cannot avoid port forwarding. Hope that helps, let me know if you have any other questions!
@@homelabd oh... Unfortunately my ISP router (Vodafone Germany) doesn't support it. Will try to get a new router and get this one to bridge mode. Thank you for your quick reply :)
@@akhileshsooraj No problem! Yep, I always recommend owning your own router & modem. Most ISP provided equipment have an additional monthly cost to them and are missing key features.
Excellent video. I'm a very old neophyte. Now that wireguard is installed in proxmox and on my phone. What do i do next?
I did port forward my port inputted during the configuration to the jellyfin port in truenas
Now how do i access the port when i'm away?
I think you could add an example of this to your current video for completion sake.
Thank you for the excellent presentation
Hey William! On the wireguard app within your phone, you can create your connection via QR code. You can then scan the QR code that is shown within your wireguard installation on proxmox. Then on the mobile app, all you have to do is toggle on the tunnel and you should be connected to your VPN. I showcase this towards the end of the video. Also, thank you for watching!
@@homelabd Many Thanks for your time and prompt reply. Didi all of that.. when i open WG on my phone i toggled the icon to the right. OK. Now i'm away what IP address i insert in my phone's google?
I did the port forwarding on my router
Again thank you for your help
@@williambravin1254 Sorry, I'm not sure if I understand you correctly. You don't have to insert any IP address into your phone's web browser. Once you are connected to the VPN, you are done. No further steps needed.
You can, however, test whether or not you are successfully connected to the VPN. By typing in the IP address of your proxmox server on your phone's preferred browser, you see if you can access your homelab hosted within your network, while you are OUTSIDE the network.
For instance, while I am abroad I can simply activate my wireguard VPN on my phone, and access my proxmox virtual environment. I would not be able to do this without direct access to my home network.
This is just an example as there are many use-cases.
Hopefully that clarifies things.
Thanks ❤
So I’ve virtualized Opnsense as my firewall on Proxmox and intend to install Wireguard in the same manner as you did. How do I get the OpnSense and Wireguard to communicate though? Through Port Forwarding?
I have been banging my head regarding wire guard. Everything appears to go through except I cant connect to the internet. On the android, it shows Transmitting but not receiving. I dont know whats preventing the hand shake. And yes I have done the port forward on router.
If I do not have a static IP address from my ISP, how do I setup wireguard in proxmox then?
HELP.
thank you so much, i ran into an issue during the installation procedure,
so
I created the container and followed the steps to where you paste Wirguard Get link
And I get this message
The system does not have the TUN device available.
TUN needs to be enabled before running this installer.
are there any ports to avoiding forwarding when choosing one for the vpn?
How can i turn off the vpn? Is shutdowning the container enough? If the container is down no one can acess the vpn right?
@@Tijolo yep if you shutdown the container that has WireGuard running, then the VPN will not function.
how to update wireguard to newer versions?