Very nice animation, thank you. Showing the work piece in the upper left hand corner was a very good idea. Now if you had animated the work piece bending in synch with the mechanism, that would have been a masterstroke
Thank you sir for sharing this video. I have a question please. If I want to form a steel flat bar with 6 mm thickness. It will be difficult to find a spring which strong enough to bend the 1st stage. Is there any solution except this type of spring. Thanks in advance
Mr thang I have been following this since long time by inspiring this I tried making an ring die not like this but something different but didn't got success can you please help me your guidance would be really helpful.
very nice ,can i have drawing sir i want make ring of 24mm dia with of 16.5mm and thk is 0.6mm of aluminium. one more ? is it possible to remove the pcs from die automatic. waiting for your repy sir. thank you.
STEP files of this video: www.mediafire.com/download/ryy1a5iyl4grje3/BendDie2STEP.zip Product automatical removing is possible by a stationary wedge located at the back side of the die. It pushes the back face of the product when the punch moves up.
Sorry, I haven't made such design. The bent product can be pushed out from the back of the die. The sliding pushing rod is placed on the green part and is pushed by a stationary wedge when the punch moves up.
Sir i want make capsule shape handle of 4mm g.i. wire. For 15 Kg metal container which is used in edible oil and ghee It is possible in single punch/operation
@@thang010146 Yes, no problem, I already have an idea that I would like to show you. I have one more question. I was inspired by your design, but I'm facing a problem. Your design is a short, thick bending mandrel. However, I would like to use a bending mandrel that has a bending length of 250 mm and a diameter of 25 millimetres. If I do it the way you did, it will bend to the length. Do you have any ideas on how to solve this? Maybe one side as in your construction and the other side is removable or hinged (to open like a hinged lid) so that you can pull the sheet metal off the mandrel? Is there an email address or something where you can be contacted? I would be very grateful
Sizi sürekli takip ediyorum çok güzel makineler tasarlıyorsunuz. Çok güzel bilgiler paylaşıyorsunuz bunu hangi çizim programında çizdiğinizi paylaşırmısınız ölçüleri nedir birde?
Very nice animation, thank you. Showing the work piece in the upper left hand corner was a very good idea. Now if you had animated the work piece bending in synch with the mechanism, that would have been a masterstroke
Wowww it's amazing 👍....First time i saw something like this brilliant👍👍👍
siz çok iyi birisiniz çok teşekkür ederim hep başaralı olun.
Aprendo mucho de tus diseños!!! Gracias por compartir.!
Thank you for your comment. It encourages me a lot.
неплохой штамп !
THANKS FOR SHARİNG, YOU ARE VERY SUCCESSFUL....
nice
great 👍
Thank you sir for sharing this video.
I have a question please.
If I want to form a steel flat bar with 6 mm thickness. It will be difficult to find a spring which strong enough to bend the 1st stage.
Is there any solution except this type of spring.
Thanks in advance
Try to use stronger springs or more springs.
I have no better concept.
Mr thang I have been following this since long time by inspiring this I tried making an ring die not like this but something different but didn't got success can you please help me your guidance would be really helpful.
Please let me know your problem in details. I will try my best to help you. My email:
thang010146@gmail.com
very nice ,can i have drawing sir i want make ring of 24mm dia with of 16.5mm and thk is 0.6mm of aluminium.
one more ? is it possible to remove the pcs from die automatic.
waiting for your repy sir.
thank you.
STEP files of this video:
www.mediafire.com/download/ryy1a5iyl4grje3/BendDie2STEP.zip
Product automatical removing is possible by a stationary wedge located at the back side of the die. It pushes the back face of the product when the punch moves up.
@@thang010146 I need to get this stationary wedge which pushes the product when the punch moves up.
How can I get it ?
Sorry, I haven't made such design.
The bent product can be pushed out from the back of the die.
The sliding pushing rod is placed on the green part and is pushed by a stationary wedge when the punch moves up.
Hello sir, very gud design
One query, what is the role of spring in punch mounted in upper shoe
The red spring pushes the green punch to press the workpiece on bottom surface of the die, when the blue outer punch continues to move down.
can this be made on ms physics a Google sketch up application
Rất hữu ích ạ
Sir i want make capsule shape handle of 4mm g.i. wire. For 15 Kg metal container which is used in edible oil and ghee
It is possible in single punch/operation
I think it's possible.
D you think is it possible to create a construktion, that can make an overlapping edge ?
Sorry, I don't have a solution for that.
@@thang010146 Yes, no problem, I already have an idea that I would like to show you. I have one more question. I was inspired by your design, but I'm facing a problem. Your design is a short, thick bending mandrel. However, I would like to use a bending mandrel that has a bending length of 250 mm and a diameter of 25 millimetres. If I do it the way you did, it will bend to the length. Do you have any ideas on how to solve this? Maybe one side as in your construction and the other side is removable or hinged (to open like a hinged lid) so that you can pull the sheet metal off the mandrel? Is there an email address or something where you can be contacted? I would be very grateful
My email: thang010146@gmail.com
@@thang010146 I send you an E-Mail:)
Sizi sürekli takip ediyorum çok güzel makineler tasarlıyorsunuz. Çok güzel bilgiler paylaşıyorsunuz bunu hangi çizim programında çizdiğinizi paylaşırmısınız ölçüleri nedir birde?
CAD files (in STEP or Inventor formats) of my videos are available on request
Bu videonun cad ve step dosyalarına nasıl ulaşabilirim?
Link to download STEP files is shown in the video description.
Let me know if you need the Inventor files.
ben step dosyayı açamıyorum auto-cad veya solidworks şeklinde varmı acaba ?
Çizimleri E-mail olarak atarbilirseniz e-mail adresim ahmetyandim@gmail.com
Do you have a variation that produces a small overlap of the edges?
Sorry, I don't have.
Sir 3mm pata h bush banana h round ek bar me plz idia
Sorry, I don't understand your request.