The Simple and Easy to Use Plethora X5! Overview, Board Setup, and Hot Knobs.
HTML-код
- Опубликовано: 18 сен 2024
- #plethoraX5 #multieffects #tutorial
Word! Today we go over the TC Electronic Plethora X5. We'll cover 3 specific items - 1) A brief overview of the pedal. 2) How to setup a new board within the unit. 3) How to set up the hot knobs for the pedal. There is a ton more here that I will go over eventually. I hope you learn a thing or two from this video.
Leave me a Like and Comment if you enjoyed it or have any questions. Feel free to me email me at priorwitness@hotmail.com
Very detailed walk through and made easy to understand. The owner's manual is sorely lacking in detail.
This is the reason i brought my TC Electronic Plethora X5 , the simplicity and flexibility . Love this pedal, sincerely i can't understand why other brands don't take this pedal as an example, instead of making so complicated menus to navigate through , that once one gets familiar with already have become an old pedal
you hit nail right on the head! I switched from the MX5 to the Plethora for these reasons.
@@priorwitness Did you find the same thing I have in that the effects are more "real" and not as forced? I have an X3 I bought last weekend, but I'm already thinking about dumping the MX5 for the X5.
@user-fg1gb4hb9l some of them yes. I love it still. but sometimes there are effects that you just know you have a sound in mind that only that pedal can do. I'm a chorus snob, for example, lol and I had to buy an EHX Small Clone to get the exact chorus sounds I had wanted. The X5 is bigger but the effects loop is SO useful for incorporating drive pedals exactly where you want in the signal chain, and honestly the value is awesome for what you get in the X5. I have several boards for bass and guitar setups. The compressor and noise gate are great. I don't feel I need separate pedals for those. The Sub N Up has so many uses and sounds great. Tremolo does exactly what it says. I really enjoy the Helix Phaser. it sounds like a Phase 90 with more juice. but yes, at the end of the day the X5 and X3 just have built in pedals that don't have that nasty digital feel. I have a NUX MG30 that sounds good as well, but the Plethora's effects blow that thing out of the water easy. So the MG30 is only used for amp modeling. My plethora does the effects great.
@@priorwitness Appreciate your viewpoints. Basically confirmed what I already knew by my ear. I used to use a TC G-Major, and the Plethora is a really good replacement.
Excellent demo. Thank you
Just picking one of these up and moving away from the HX Effects. I plan to use this only in the loop. I wish that the three hot knobs could be assigned for each individual effect (like the three knobs on the HX). Your video is the first I've seen to show how the knobs actually work. I'm hoping I made the right move!
I'm glad I could help! I used to own an HX Effects. I moved on from it for a number of reasons. It's a fantastic unit but I had to learn in time it just wasn't for me. The Plethora is simple yet complex enough to be flexible. The real fun is when you start downloading and messing with toneprints. A lot of cool sounds can be had there after you get bored with the stock stuff that is in the Plethora
@@priorwitness I just realized what I'm wanting with the knobs is what going into edit does. Easy enough! LOL
Great presentation!!
Great walkthrough!
Cool video!
Hi mate great video! Can we assign each switch to recall a specific board? i.e switch 1 loads board 1. Switch 2 loads board 2 and so on..
Hey Thanks! that would be great wouldn't it! Sadly no. You can do that with an external MIDI controller though.
@@priorwitness Arr really..! that might work.. Would there be any latency tho do you think? The change from board to board I mean..
How do I utilize the mash function?
Thanks for this awesome video. I have a question for you, can I use my Tonex pedal with Plethora ? I wonder if the 4 cable method works with tonex - plethora?
Yes as a matter of fact you can. Guitar and whatever pedals you want going in front of plethora go in the input, then I would recommend throwing the Tonex in the effects loop of the plethora. Run the output of the plethora to the effect return of your amp. Now it depends how you want to use this. If you just want your tonex and plethora taking over your amp then you're done. But if you want more flexibility, then you'll want the send of the plethora going to the input of your amp. Then from the fx send from the amp to the input of the tonex, then from the output of the tonex to the fx return of the plethora. Then you'll have to make sure that one of your blocks turns the fx loop on and off
@@priorwitness
Thank you very much for your detailed answer.
Can the mash be used on every effect or just certain ones. Could you possibly make a video for the Mash?
that's a good idea actually. short answer is I THINK every effect on there has a MASH option. I know for a fact every delay can be switched from Tap Tempo to MASH to nothing if you want.
I haven't seen a video about it yet so I just thought it would be great if someone did.
Can midi turn on and off individual pedals in a certain board? Or would i only be able to switch boards during a set?
@@adamalper804 yes it is possible to control individual pedals via MIDI as well as switch boards
@@priorwitness Awesome, thank you! Must've been old videos that I saw or review that I read...I had the impression that midi could only change boards, not pedals on/off or their settings.
Is the phase new? I’m eyeing one of these units but the product description doesn’t mention a phaser
yes! The Helix, which is what the phaser is called, was added in a later firmware update. It sounds great!
Is there a momentary silence when switching effects on and off? I have read this in several reviews.
Nope. I've not had that issue. Switching between boards, yes. But how I play is I have a board setup for certain situations and I switch in and out of effects. It's like having five individual pedals in front of you. For me it works great
Thanks for the quick replies. One more QQ: Is it possible to setup the X5 with all five pedals active but still have it set so you can run three in your amp loop and two before the amp? In others words, do you have to use one of the five effect slots only for the FX loop?
@@priorwitness
@19581998 no problem! You just caught me at a good time 😀. Yes it is possible to do that. In fact I used to do that with my amp. I would run a couple effects like a univibe and a compressor in the front of the amp and then on the back end, or in the fx loop of the amp I would have three effects running: a noise gate, a chorus and a delay for example.
@@priorwitness wish I could figure out how
How do I run this through my Voco Loco, that I need to plug my Woodwind mic w/phantom power? Thanks
So you could do this a couple different ways. You could run your voco Loco into the FX Loop of the X5 so that some effects go before the Loco and some come after it. So you would run the send of the X5 to the input of the Loco, and the return of the X5 to the output. The Loco has an FX loop as well. So you could have the X5 in the FX Loop as another option. Run the input of the X5 to the Send of the Loco and then the output of the X5 to the Return of the loco.
So does the signal path go R-L or L-R?
It works either way actually. If you go into Global Settings you can set to go either way you want.
@@priorwitness thanks! So does inserting the effects loop just reverse then?
@jared7611 of course! and yes
Is there a user manual for the X5?
I'm sorry earlier I accidentally gave you the link to the MX5. Dopey me! Here's the X5 - mediadl.musictribe.com/media/PLM/data/docs/P0D9M/QSG_TE_P0D9M_PLETHORA-X5_WW.pdf
Wish TC would go back to regular foot switches instead of the mash. Too flimsy.
I've not had that issue. The switches react great. Compared to something like the Headrush MX5 which is what I used to have or even the GT1000CORE which I had for a week, these switches are the best for me
more expensive then boss gt1
I can no longer create my boards
i noticed your channel name and i want to say sorry that people have wronged you. i also have been treated unfairly been condemned for having doubts but, please seperate the actions of imperfect people from what the bible says. please continue to serve god even if you need to stay away from meetings. please don't give up we only have a little time left. right now is the ezekiel 38-39 beginnings of the last war. there will be 7 years that israel will be tooken over and a final test "the mark of the beast". you are so close friend and i just want to say i empathize with you. hold on we are close.