IONIQ 5 - Best Accessories - Upgrades & Modifications
HTML-код
- Опубликовано: 27 окт 2022
- Below is a list of all products shown in this video.
Folding storage box... www.amazon.com/dp/B09W1G2FM4?...
Air Spencer (000400 CS-X3 Squash... www.amazon.com/dp/B00150T13G?...
Sunglass Holder... www.amazon.com/dp/B0BD4Y88QW?...
Belkin MagSafe Car Vent Mount,... www.amazon.com/dp/B08LQVD6ZR?...
USB 3.0 Adapter 90 Degree Male to... www.amazon.com/dp/B0793NQRYZ?...
Sinjimoru Magnetic Cable Clips,... www.amazon.com/dp/B01DPGW22Y?...
Car Neck Pillows Both Side Pu... www.amazon.com/dp/B08Y97FMBT?...
Type-C Male to USB3.0 Male... www.amazon.com/dp/B08P57T56M?...
Car Seat Hooks, Cars BackSeat... www.amazon.com/dp/B0981QLT6N?...
EcoNour Car Trash Can with Lid (2... www.amazon.com/dp/B098Q4589Q?...
YETI Daytrip Lunch Box, Charcoal www.amazon.com/dp/B0842BT8GN?...
Garmin Mini 2 Dashcam
a.co/d/iMWBKZ4
Covercraft
www.covercraft.com/us/en/prod...
WooEV
linerx.com/collections/ioniq-5
Craftcloud 3d Printing - From Thingiverse
www.thingiverse.com/thing:544...
EV Vida - Console Cover
ev-vida.store/products/ioniq5... - Авто/Мото
Lots of cool ideas! Thanks, mate.
i love the looks of this car
Wow!!!! Amazing accessories!!! Thank you
Keep it up, people are interested in your content :)
Nice review, thanks 😊
Thanks for the heads up on Aaad. Should do a video on that alone.
Integrating wireless charging into that phone mount would be great. I’ll have to look into your dashcam though, I have a BlackVue setup hardwired to a spare fuse slot, an obd adapter would’ve been nice too but I use mine to power a wifi hotspot for remote viewing and my daughter’s tablet.
I've been looking for a good sunglasses holder solution for my Ioniq 6 Limited. Thanks for the tip! I just ordered the and the cupholder rash cans.
Nice watch 😊
Amazing ideas. Plus it’s cool a creator with less than 100 subs can get 16k views on a vid!
Hi, amazing efficient and helpful video.
The Yeti drink cup , do you have a link?
becaue it look like perfect fit to the cup holder
Hi Cody, thanks for your video! How did you fix the sunglass holder from Amazon? If you have steering wheel on left side there is no handle over the door and no chance to fix the holder by screws. Or did you fix it on the rceiling cladding only?
Hey! Awesome video!! I just want to ask you that how did you installed Garmin Mini 2 Dashcam in the rear side? I saw so many videos to install it in the front side but couldn't find any videos for rear side!
You are right about that! Routing the rear cord to the OBD is much more complex, so to be honest, I just paid Best Buy to do it for less than $200. They did a great job and made sure to route it behind airbags which is important. So unfortunately I can't shed any light on this other than saying that having Best Buy was the way to go for me.
Do you have a link for the magnet and the foam cushions?
Hi Cody....can't hear where you got center cap insert for wheels? Didn't see a link. Thanks
Hi Cody, I'm looking to delete the emblem as well but can't see anything online. I know you said your paint shop did it, would you know how and which paint shop? Thank you
how did the badge mount holes disappear? body filler?
What is the name of the sunglass holder and wireless connector for apple play?
Can you provide the link for AAWireless - Wireless Car Adapter for apple iphone?
Cool storage boxes - Is that net holding it the one that came with the car? Or did you have to get a different size net?
Yeah, it's the one that came with the car.
can you show your cable settings with mini 2😊
I bought the sunglasses older for the space where the grab handle is missing (driver's door). So how do you mount it if there is no grab handle screw brackets in place? A screw into the roof moulding doesn't seem likely to be strong enough.
Same here. Did you find a solution?
I like how it has the Michelin tires…
Great ideas! Do you have a link to the wireless CarPlay/AA adapter?
AAWireless - Wireless Car Adapter for Android Auto™ a.co/d/fZn8ZMQ
Do they have one for iPhones?
Not the best picture of Kyle Connor! Great video. Thanks.
Hi, after hood badge removed, is there indentation? Thanks!
There isn't the body shop I took it to did a great job of filling in the indented area and repainting it
What magnet did you buy to glue to the back of the belkin mount?
I went with this one...
CMS Magnetics Disc Magnet... www.amazon.com/dp/B008CQ992E?ref=ppx_pop_mob_ap_share
what's the car streaming app?
The soda-cooler, would you happen to have a link to it ? :)
YETI Daytrip Lunch Box, Charcoal a.co/d/7LuuSH8
@@codyrodenhuis4265 5:02 into the youtube video, not the cooler box - but the cooler cup :) Does it fit a bottle of soda ?
@@TheJokercrs Yes it's capable of holding up to six cans of soda so a soda bottles shouldn't be a problem
Your glove box is different to the UK glovebox, ours slide out instead of the conventional drop down lid
Yea, I'm jealous! You got the better glovebox... Ours in the US is basic
@@codyrodenhuis4265 why would they do that, great review by the way
@@Paul001 thanks! Yea, no idea why these cars vary so much by region. Enjoy your bigger glovebox while I make due with my little lunch box-size glovebox LOL!
@@codyrodenhuis4265 there seem to be many downgrades for the US version for whatever reason. Like not getting the digital side mirrors. Or that you can’t use the back or 360 cameras in general while driving. In the Europe model you just activate the back camera if the rear window is not enough for driving.
Anyway but thanks for the vid a lot of nice ideas and gadgets !
How did you manage to debadge and hide the oval recess where the badge was?
I went to a body shop that was able to fill in the indented area with body filler, sand it down, and color match the Cyber Grey.
If you don’t mind me asking about how much did that run you?
@@jdombonetto Yea, it was just around $900 for both front/rear
Cody, may I ask for the shop that did that neat job? TIA
@@friosjr BumperDoc... There are a few in San Diego area but I went to the one in Santee
Haven't been able to find a a d
Can't you please send the link?
It's AAAD.. I believe you can find it on the XDA website
Can you tell me where to get the 3D printed morse code badge for liners?
If you go to the Yeggi site where they list 3d printing files and search for "Ioniq 5 Morse" it should be there. Then just download the file and upload it to a 3d printing service like CloudCraft.
@@codyrodenhuis4265 Oh no! It seems that file is no longer available from the site! Any way you can email me the files?
@@nathanvalencia576 unfortunately I deleted my file from my phone after ordering. I tried to see if I could retrieve it from CloudCraft past order but couldn't either. Dang! That's weird!
@@codyrodenhuis4265 Thanks for checking! Guess I'll hope for that file to be released again.
Hey man this video is amazing, our company would like to talk about send you out some free product to have for your vehicle!
I'm down! Let me know!
Do you have a link to the covers for the wheels?
www.ebay.com/itm/293143862286?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=egiIUv6sSZO&sssrc=2349624&ssuid=HYV3GUBqQkq&var=&widget_ver=artemis&media=EMAIL
Which measurement of center hub cap did you get? Thanks
@@Nickkenf1 I got the 76mm size
Thank you
Is that the best size to get or would you have gone bigger or smaller a size?
a few days there was an audio upgrade now my car is wireless for music
What update? Didn't get that!
video looped back around to the start at 9:58
Hi, what's the car's color name?
Hi, it's Cyber Grey
@@codyrodenhuis4265 Looks great!
:)
Made in Indonesia
LG-Hyundai Indonesia Manufacturing The Largest in Asia Pacific
Not to forget Hyundai is the owner of Boston Dynamics Robots
Hyundai is The Best !
That's cool :-)
Hi,I am a manufacturer of electric tailgates for cars, can we cooperate?
Hi, thanks for reaching out. What did you have in mind?
本文是關於IONIQ 5汽車的配件和改裝的視頻介紹。作者首先介紹了去掉車標的好處,因為他喜歡更乾淨的外觀。接下來,作者介紹了他最喜歡的配件,如手套箱中的Yeti保溫袋,Belkin車載手機支架,以及適合在IONIQ 5汽車中安裝的3D打印眼鏡盒,無線適配器等。此外,作者還推薦了一款便攜式的Garmin Mini 2行車記錄儀,以及適合IONIQ 5汽車的地墊和空氣清新劑。最後,作者還分享了他自己的電源線管理解決方案。
Most important IONIQ 5 Accessory -- a spare battery at $60K...
How did you remove the emblems without that indent in it? I’m trying to do this but I’m wondering what they did to make that look flat and smooth
Costly operation at a paint shop sadly.