As a scrapper, I recently watched one of your videos and found it to be very informative and full of useful information, but as soon as I heard you pray, I SLAMMED the Subscribe button! GOD Bless you, my brother... HIS Forever, Mark
Yes very informative. I on the other hand slammed the pause button as soon as i heard the misinformation of being thankful prayer. For me seeing is believing, i see no truth to that belief.
I did know the newer microwave ovens didn't use beryllium anymore but the best idea I saw here was to tape around what just might be poisonous. Great video!
Considering the toxicity of beryllium oxide, and even the remote possibility that a particular magnetron may or my not have it, I would humbly recommend NOT 'tickling the dragon's tail' for this extra small amount of copper. That being said, please heed the warning the author of the video gives, and know the risks, thanks.
I was listening when my husband was watching your channel and I just wanted to say how much I appreciated your prayer and giving the true plan of salvation! This really encouraged me today. May God bless you!
Scrapitall: thanks for sharing this!!! I have a growing pile (maybe a hundred of these). I always ground them apart. I'll definitely give it a try. I can do the prep work in my currently unheated shop...then take them inside the house where it's warm to do the prying. Sweet! Also, thanks for sharing your faith in God. It's what believers are supposed to do.
I'm a new scraper and have watched so many videos ! You completely shocked me! You are the first person in scraper videos who closed out with prayer! It is so refreshing that you're not afraid to pray openly and mention Jesus! I love it! Keep on doing your thang!
I used to work at a new and used appliance shop and we actually had a tachometer ... I believe I'm calling that right to check to see the microwaves coming out of a microwave see if there's any leakage of microwaves round the door ect..orMore than there should be ... or out of a spot it shouldn't be.. make sure it ain't putting out too high of microwaves before we could sell the used appliance .. Same with the old TVs back in the day of tube TVs.. Wow I never thought I'd Say something like that I must be getting old.. For all you people that never heard of them.. And tarin apart electronics I suggest. Getting a Tachometer
I used a jewellers saw to cut that chunk of copper off the end which also cuts lose that internal wire. Because the jewellers saw blade is so fine, hardly any metal is lost and you can avoid the ceramic end easily.
Yeah man thank you for posting vids and addressing the pink stuff it can be a terrible and letting people know the dangers of tearing things up can hurt you permanently and glad the prayers helped keep looking up brother
He calls it a 'puppy" and then he brutally clamps it into a vise and then viciously drives a screwdriver into it with a hammer. Tore off its legs with pliers, and ripped out its heart and threw it in a pile. Microwaves everywhere are terrified. Do not show this video to your appliances or puppies.
Thank you for bringing up at least the importance of the safety parts of it because that's something I didn't know until I seen a video not too long ago I didn't even think that you were going to get into it but you did that was awesome because I've met many of people who have torn s*** apart and didn't know
The other thing to watch out for: the center of the magnetron (that goes down the center of the copper from one end to the other) is made of THORIATED tungsten. Thorium is RADIOACTIVE.
I’ve heard that but apparently it’s such small amounts it’s not dangerous. The scrap yards scan every load for radioactive material and they have no problem with magnetrons. Thank you for the concern and for watching.
Bananas and brazil nuts are also radioactive, and we eat those. Thorium has a half life of 14 billion years, meaning that in the lifetime of the universe, there's only a 50 chance any given atom will decay. That makes it barely radioactive at all. Thoriated tungsten is used in TIG welding electrodes, and is a natural element found in rocks. Of all the things to be worried about, a tiny amount of barely radioactive thorium is among the least of them.
The whole thing and the microwave becomes radioactive… Thorium is deadly in any amount, breathing it in is the most dangerous but it can be absorbed into the skin too… Gloves and masks… and less than 15 minutes per day and you should be fine.
If those were as hazardous as some say, I should have been dead 23 times over. If they truly are, then I must have some angels working double overtime ,,,or, I'm just too stubborn to lay down and give up.
Thank you Scrap at all. I have made a couple videos on this and I love your. Way of doing it. I’ll be doing that from now on. I just gave about 30 of them things to Scorpion Metals.
Why are there so many haters here? Maybe the man is retired and needs just a little more money to get by on every month. Maybe he doesn’t need the money at all, but is doing it just because he enjoys keeping busy. Beats sitting in a rocking chair and rocking your golden years away. Maybe he puts that little bit of money up for his grandkids. Maybe he’s just doing his little part in trying to reuse/recycle what he can. Man if y’all can’t do anything but bad-mouth and complain from your anonymous position behind a keyboard, maybe just don’t comment at all. This man isn’t hurting you. At least he’s trying. Where’s all Y’ALL’S videos?
Thank you, I appreciate that. I find it so interesting how some people feel the need to be rude to a complete stranger. I understand many won’t like or understand what I do and that’s ok, but just move along to another video. Again, thank you!
@@scrapitall200 I see a lot of this all over RUclips. Anonymous keyboard warriors who don’t have anything good to add to the discussion. I don’t do videos but I admire those who do. I can’t imagine all the work that goes in to actually making the video alongside whatever it is you’re videoing. Keep up the good work. Some of us are out here trying to learn something from the ones who are actually doing something.
@@charlessansom4849 thank you, it’s nice to read comments like yours. I try not to let the negative comments get to me, but I do wish those people would just move on without saying anything, too much negativity already in the world, no sense in adding to it. Have a wonderful day and thank you for your support.
I honestly don’t know! I do know that my scrap yard has no issues with microwaves being brought in while or individually scrapped out, they’ve never mentioned any dangers that they’re concerned with. Thank you for watching.
I sure hope they aren’t, as breathing in thorium vapors would produce injuries immediately and radiation poisoning too. There’s no reason for thorium to be in welding rods… it would also expose their customers to radiation… Just no…
@@pazsion here is just 1 sentence from the Google results I get. What are the advantages of a thoriated tungsten? 2% Thoriated is superior to pure tungsten electrodes since they have a higher electron output, better arc-starting and arc stability on plasma welding applications, can in some cases run faster, and have higher current-carrying capacities.
Thank you very much for that. I've been using an angle grinder, not anymore. I'm going to be doing it that way from now on. That's a lot better. A lot safer, less dust and I definitely will use some tape to cover those ends up. Thank you very much. 👍👍🙂🇨🇦
I just cut three of them up the way you showed it. It's a bit of work, but it's a lot better than getting all that copper dust. I'll tell you that much. Thank you again. 👍👍🙂🇨🇦
@@ipaddlemyowncanoe.7441 awesome! I find once I can get a thicker screw driver in between, it provides much better leverage. Some come real easy, others seem to be a bit tougher. Thank you for letting me know how it worked for you.
I don’t know why you’re not collecting the tungsten filament inside the magnetron. It’s a nice little coil in there and will add up pretty quickly if you scrap many of these.
I discovered each end is copper, covered with steel. Instead of jamming the screwdriver in to pop the end off, you can use your wire cutters to peal off the molded sheet steel ends, taking with them the un wanted ceramic ends. I can see the copper end @ 5:30 and 6:40 you left behind. Your magnet is being attracted to the steel wrapping on the backside of the copper. I'm sure all units aren't built the same, but this is what I experienced with second unit I did. Haven't done any since.
@@gdsstudio974 you might double check cause if it’s what I think you’re talking about, that’s copper coated steel under that thin layer of steel. They look like copper but in my experience the magnet always sticks.
@@scrapitall200 I stand corrected. I went into my copper stash and found the two ends, and discovered they are not copper. I don't know how that got by me. Thanks for your feedback.
I know that when I used to work in a government facility that had asbestos in the ceilings, when opening a ceiling tile where asbestos dust could have settled we had to spray around the edge of the tile with a mist of water (from an ordinary spray bottle). I can't remember for sure, but we might have added just a little dish soap too...either way would work. The idea was to dampen any dust to prevent it from going airborne. That might help here, where there is a chance you could crack the ceramic and release micro particles.
Thank you! When I first started scrapping I didn’t have any power tools and so I want to show others who might not have them ways to scrap without power tools. Thank you for watching.
@@jakub3851 just clip what you can with side cutters. It’s about 1 cent in copper so leaving it behind is an option and not losing much value. Hope that’s helpful
I cut off that copper tip and that releases the little connecting piece of copper that attaches from the tip to the barrel. Great video brother. Glad the family emergency was dealt with and everything is going to be ok
I’ve tried that before and it still wouldn’t come out. I’ll have to give it a try again, thanks. Thank you so much, I appreciate that. Thank you for watching brother.
@@scrapitall200 Huh? Ah - I don't think those should go into shred... [exactly what do you mean by 'regular shred'?] I believe it needs to go to hazardous waste drop-off...
@@pazsion Huh?? That didn't make sense... You can't anodize copper. And I don't think ANYTHING on a magnetron is painted. I believe that is copper PLATED steel... "All copper should be beryllium"? (I don't know what you mean by that.)
Great idea with the tape. In a few weeks I am going to try my hand at scraping a microwave for the first time. Is there any other pieces to be careful of
Thank you! The capacitor is the other thing to avoid. They are designed to bleed off any stored up electricity after being unplugged, but if the little piece (you’ll see it attached to the capacitor and grounded to the metal frame) fails it’ll still be fully charged and that will give you one heck of a shock. So just don’t touch both terminals at the same time. I do have a microwave video if you need. Microwaves are fun, easy and you’ll have no problems at all.
I used to work for the military in the black box repair electronics section, and I can tell you that government magnetron do use beryllium for their insulators in their magnetrons. However, the cost to produce commercial magnetrons would be too expensive to use beryllium for cheap microwave ovens. So I highly doubt you would find beryllium in those... The government actually collected all the old magnetrons for such beryllium collection. Just a little info. I highly doubt any landfill would allow microwave oven disposal if they did contain beryllium... JMHO!
I don't know about where you live, but here in Australia, there's the possibility that someone might put a microwave appliance in the regular waste bin. I'm told there's a radioactive component in some magnetrons that means it has to be handled specially. These microwaves really should be sent to a proper collection facility in any case, as they're not good for belt systems that are designed to separate different types of waste. Some scrapyards will take them, it seems to depend on whether they're okay with handling radioactive materials commonly used in microwave appliances.
It's the thoriated tungsten filament. It's very small, and the radio activity is very small as well. You get more radiation by taking a 20 minute flight. Radioactive is a big scare monger word that gets tossed around everytime someone discovers that a consumer product contains a very small amount of Radioactive material. The lack of context & ignorance of raradioactivity leads the misinformed into a panic.
Well done! It’s always better when we don’t have to bring out the wheel of carnage. I’ve been previously chucking these but will definitely give this a go 👍🏻
Ive always just spray the thing down with wd40 and smash it with a hammer in a bag.. let the bag sit for a bit if your worried or use channel locks in a bucket of water..
That’s a great question. Honestly it depends on the scrap yard. I’ve heard of scrappers getting #1 copper for them, but I get #2 at my yard. Thank you for watching.
@@scrapitall200 I generally make a small cut just enough to go through the thin outer layer with hammer and chisel. Then get a grip with some cutters and then pry it downward towards the border seal. Once that thin layer is removed around the seal there's nothing holding those plates. So just give them a good pop and they come right out.
The copper piece itself is the beryllium as it’s a form of copper alloy. Those end pieces are ceramic… like a spark plug. Can’t think of any reason they would coat it in a layer of metal oxides it’s just paint. ?
Scrap yards will pay you as copper 1 but beryllium is much more valuable alloy… need to verify it and sell it as beryllium. But it’s less of a hassle to get the scrap price I guess.
You can use a pipe cutter. The one with 2 rollers on one side and a cutting disk on the other. Its screw clamps down and you just spin it. It slowly slices the copper and you tighten it more to go deeper.
Great way to deal with these. I have been saving them up for processing later the last 3 years, not sure how many I have now. My idea was angle grinder all the way around on both sides. Your method will save a lot on cutting discs. I'm gonna dig out the crate of magnetron cores I have stored somewhere. I wasn't subscribed... 😱 how did this happen? Fixed that now 👍
I used to use the cut off discs but it’s messy with the copper dust and it does get expensive. Thank you so much for watching and subscribing, I really appreciate that. Happy scrapping buddy.
I think they’re probably safe, but I don’t know that for sure. Plus, it’s not a lot of copper in all honesty. Thank you and thank you for watching buddy.
Money is money and it all adds up. Most hobbies cost money, this hobby actually makes money. Plus, you can’t put a price on having fun. Thank you for watching.
That ceramic should be treated the same way you treat any firearm by assuming they are ALWAYS loaded. Assume that stuff is always beryllium oxide. Shit is crazy toxic. I know us scrappers think "safety third", but this stuff is one of those rare times we maybe think "safety second"😂. Treat it like asbestos.
Nice, and I agree with you that you might as well be safe. Especially with older microwaves. From my research, all beryllium oxide is the pink colour, but all pink isn't beryllium oxide. I actually tried this before but without cutting the initial slit. I squeezed it really tight in the vice and noticed it bulging so I hit the ends with a wood chisel. This looks easier than that, but I think if I have the grinder out, I'll probably just keep cutting it. 😂 I'm lazy.
All berillium is not Pink. I have RF transistors that are advertised as having berillium that are all White. The 2N5591 for example. The Cap is aluminium oxide but the base between the semiconductor and heat stud is Berillium oxide.
@@borisj4054 Oh, that's good to know. I only looked up microwave magnetrons, but that could mean that there might be some of them that are white as well.
@@scrapitall200 our microwave/oven combination just broke down this week, looking forward to salvaging it. Will watch some video's to see I don't get a shock ;)
Yeah that makes sense. Sure isn’t as easy scrapping metal as it once was though. I’m getting into welding myself and melting down the scrap metal to use for various tools and things. More money in it my friend. Not too expensive to get into if you DIY most of what you need. Harbor Freight has great prices on welders. Maybe that’s a better way to go for you IDK… thanks for sharing this I didn’t know there’s was that much copper in microwaves TBH.
There’s even more if the transformer is copper and not aluminum. I want to get into melting copper and sand casting some art, there’s definitely more money in it that way. Thank you for your suggestions and for watching
No! It doesn't matter how wet you get it. It is a glass/ceramic. As soon as you start grinding it (or fracture it), you will raise a trace of dust. (You'd have to cut it virtually underwater...) I would not do THAT either, how would you dispose of the water? Eventually you will have surfaces, cutting disks/tools, or containers dry out, freeing the residue! (And I don't think we want that in the wastewater stream either.) Beryllium is EXTREMELY toxic, AFAIK.
@@troubleshooter1975 it is which is another reason I don’t believe it’s used in microwaves. Also scrap yards wouldn’t want them since they shred stuff like microwaves and that would be a huge health risk to the workers.
@@scrapitall200 Not porous at all. It is airtight. It is the high vacuum seal while insulating high voltage. It is a ceramic, glass like. Like porcelain.
Watch this video to see how well a machete works at cutting copper motors in half 👇
ruclips.net/video/CpaLHh12ApU/видео.htmlsi=ubXjDVyuU23ofaht
😅
hatchet turned out better
@@shaystern2453 I take it you saw that video? I agree, the hatchet is sweet.
As a scrapper, I recently watched one of your videos and found it to be very informative and full of useful information, but as soon as I heard you pray, I SLAMMED the Subscribe button!
GOD Bless you, my brother...
HIS Forever,
Mark
Amen brother!
Thank you so much. God bless you and thank you for watching and subscribing.
Yes very informative. I on the other hand slammed the pause button as soon as i heard the misinformation of being thankful prayer. For me seeing is believing, i see no truth to that belief.
@@carmichaelmoritz8662 good for you, negative Nancy.
@@carmichaelmoritz8662 Be thankful for those eyes that allow you to see at all, brother...
@@fleshbag7754 🤣😂🤣
I did know the newer microwave ovens didn't use beryllium anymore but the best idea I saw here was to tape around what just might be poisonous. Great video!
Definitely better to play it safe even if the chances of it being beryllium are low. Thank you very much and thank you for watching.
Die Arbeit lohnt sich doch nicht. Mindestens 20 Minuten Arbeit für ca. 50 Cent. Ein BWL Kurs wäre da angebracht.
@@heinzgeorgspengler-ob8ux
Lazy man with no imagination.
The best idea, is not to risk your health or waste your time for 45 cents worth of copper!
Considering the toxicity of beryllium oxide, and even the remote possibility that a particular magnetron may or my not have it, I would humbly recommend NOT 'tickling the dragon's tail' for this extra small amount of copper. That being said, please heed the warning the author of the video gives, and know the risks, thanks.
I've only thought about trying to get that copper. I wasn't sure 'bout how to go about it. Your way looks safe enough to try. Thank you and God bless.
Thank you brother! I hope it will work for you.
God bless!
@scrapitall200 You're welcome brother!
Brilliant! Again, no waste! Keep them coming!
Thank you! I really enjoy making videos.
Thank you for watching, I appreciate it.
Wow my friend. Thank you for sharing your new hack. Very helpful
You are very welcome!
Thank you for watching and leaving a comment, I appreciate it.
Thanks at the end...Best Part Honestly.
It’s my pleasure!
Thank you so much for watching.
I was listening when my husband was watching your channel and I just wanted to say how much I appreciated your prayer and giving the true plan of salvation! This really encouraged me today. May God bless you!
That is so awesome, thank you for sharing that with me. God bless you and have a wonderful day!
That is amazing. I never knew that. Good info. Amen and God Bless!
Thank you, I’m glad you enjoyed it.
God bless you too and thank you for watching.
Scrapitall: thanks for sharing this!!! I have a growing pile (maybe a hundred of these). I always ground them apart. I'll definitely give it a try. I can do the prep work in my currently unheated shop...then take them inside the house where it's warm to do the prying. Sweet! Also, thanks for sharing your faith in God. It's what believers are supposed to do.
You’re welcome!
I hope you’ll find it to be a good method, I like it.
Absolutely! I try to always give God the glory He deserves. 😃
I'm a new scraper and have watched so many videos ! You completely shocked me! You are the first person in scraper videos who closed out with prayer! It is so refreshing that you're not afraid to pray openly and mention Jesus! I love it! Keep on doing your thang!
So happy you enjoyed the prayer. Praise Jesus for His goodness!
Thank you for watching.
Thanks for showing how it is done. Learn something new I been throwing them away but not now
@@52Mirza you’re welcome!
Yeah they are a few ounces of copper typically.
Very innovative. Thanks for sharing. I will try ot out.
Thank you and you’re welcome!
Thank you for watching.
I used to work at a new and used appliance shop and we actually had a tachometer ...
I believe I'm calling that right to check to see the microwaves coming out of a microwave see if there's any leakage of microwaves round the door ect..orMore than there should be ...
or out of a spot it shouldn't be..
make sure it ain't putting out too high of microwaves before we could sell the used appliance ..
Same with the old TVs back in the day of tube TVs..
Wow I never thought I'd
Say something like that I must be getting old..
For all you people that never heard of them..
And tarin apart electronics I suggest.
Getting a
Tachometer
Thank you!
I used a jewellers saw to cut that chunk of copper off the end which also cuts lose that internal wire. Because the jewellers saw blade is so fine, hardly any metal is lost and you can avoid the ceramic end easily.
@@lucdaigle2394 I like that idea, I’ll have to get one and try, thank you.
Another home run video from Scrapitall! Simple, yet in-depth. I like it! I'm glad your family is doing better. Thanks be to God!
Thank you so much my friend!
God bless you!
Yeah man thank you for posting vids and addressing the pink stuff it can be a terrible and letting people know the dangers of tearing things up can hurt you permanently and glad the prayers helped keep looking up brother
You’re welcome!
Thank you for watching brother.
Thanks for sharing your method, gonna try it. I use small bolt cutters to remove that crimped end off.
You’re welcome! I’ll have to give that a try, thank you.
Thank you for watching.
I had 6 microwaves that I scrapped all at once yesterday.one of them was a Montgomery Ward name.resulting in 2 copper transformers 💪💪💪
That is really awesome, great score!
He calls it a 'puppy" and then he brutally clamps it into a vise and then viciously drives a screwdriver into it with a hammer. Tore off its legs with pliers, and ripped out its heart and threw it in a pile. Microwaves everywhere are terrified. Do not show this video to your appliances or puppies.
Show them this if you want to scare them straight 😂
10/10 for your creative comment.
Thank you for watching.
Well, that's what you do with puppies...
@@Road_Rash 😂😂😂
Good thing I identify as a refrigerator. 😂
@@SwampDonkey64 😂😂😂
Thank you for bringing up at least the importance of the safety parts of it because that's something I didn't know until I seen a video not too long ago I didn't even think that you were going to get into it but you did that was awesome because I've met many of people who have torn s*** apart and didn't know
You’re welcome!
I like this idea a lot, thank you!
You’re welcome and thank you for watching.
Me too! Really interested in that myself. Good luck to you!
Thank you and you too buddy.
Brilliant! awesome method 😎
Thank you so much!
The other thing to watch out for: the center of the magnetron (that goes down the center of the copper from one end to the other) is made of THORIATED tungsten. Thorium is RADIOACTIVE.
I’ve heard that but apparently it’s such small amounts it’s not dangerous. The scrap yards scan every load for radioactive material and they have no problem with magnetrons.
Thank you for the concern and for watching.
Bananas and brazil nuts are also radioactive, and we eat those. Thorium has a half life of 14 billion years, meaning that in the lifetime of the universe, there's only a 50 chance any given atom will decay. That makes it barely radioactive at all. Thoriated tungsten is used in TIG welding electrodes, and is a natural element found in rocks. Of all the things to be worried about, a tiny amount of barely radioactive thorium is among the least of them.
The whole thing and the microwave becomes radioactive…
Thorium is deadly in any amount, breathing it in is the most dangerous but it can be absorbed into the skin too…
Gloves and masks… and less than 15 minutes per day and you should be fine.
If those were as hazardous as some say, I should have been dead 23 times over.
If they truly are, then I must have some angels working double overtime ,,,or, I'm just too stubborn to lay down and give up.
@@invisibilianone6288 😂 I hear you on that buddy!
Thank you Scrap at all. I have made a couple videos on this and I love your. Way of doing it. I’ll be doing that from now on. I just gave about 30 of them things to Scorpion Metals.
You’re very welcome! Thank you for watching, I appreciate it.
Why are there so many haters here? Maybe the man is retired and needs just a little more money to get by on every month. Maybe he doesn’t need the money at all, but is doing it just because he enjoys keeping busy. Beats sitting in a rocking chair and rocking your golden years away. Maybe he puts that little bit of money up for his grandkids. Maybe he’s just doing his little part in trying to reuse/recycle what he can. Man if y’all can’t do anything but bad-mouth and complain from your anonymous position behind a keyboard, maybe just don’t comment at all. This man isn’t hurting you. At least he’s trying. Where’s all Y’ALL’S videos?
Thank you, I appreciate that.
I find it so interesting how some people feel the need to be rude to a complete stranger.
I understand many won’t like or understand what I do and that’s ok, but just move along to another video.
Again, thank you!
@@scrapitall200 I see a lot of this all over RUclips. Anonymous keyboard warriors who don’t have anything good to add to the discussion. I don’t do videos but I admire those who do. I can’t imagine all the work that goes in to actually making the video alongside whatever it is you’re videoing. Keep up the good work. Some of us are out here trying to learn something from the ones who are actually doing something.
@@charlessansom4849 thank you, it’s nice to read comments like yours.
I try not to let the negative comments get to me, but I do wish those people would just move on without saying anything, too much negativity already in the world, no sense in adding to it.
Have a wonderful day and thank you for your support.
Works great
Awesome!
Thank you sir I myself go after those as well they're great for copper thanks for sharing this six stars
You’re welcome!
Thank you so much for watching, I really appreciate it!
what do you do with the taped parts? submit as steel and/or submit telling what the part is?
It goes as steel shred to the scrap yard.
Great video, voice and editing perfectly done.
I don't pray much, yet i really appreciate
Wow, thank you so much for your kind comment, I really appreciate it.
That's a nifty trick. I always learn better ways to scrap after watching your videos.
I’m happy you liked it.
Thanks so much for watching buddy.
Thoriated tungsten is used daily by tig welders. Not sure it's the issue that some commenters are making it out to be
I honestly don’t know!
I do know that my scrap yard has no issues with microwaves being brought in while or individually scrapped out, they’ve never mentioned any dangers that they’re concerned with.
Thank you for watching.
I sure hope they aren’t, as breathing in thorium vapors would produce injuries immediately and radiation poisoning too.
There’s no reason for thorium to be in welding rods… it would also expose their customers to radiation…
Just no…
@@pazsion look up "thoriated tungsten tig" and you will see.
@@pazsion here is just 1 sentence from the Google results I get.
What are the advantages of a thoriated tungsten?
2% Thoriated is superior to pure tungsten electrodes since they have a higher electron output, better arc-starting and arc stability on plasma welding applications, can in some cases run faster, and have higher current-carrying capacities.
Great video happy holidays and a new year
Thank you!
Merry Christmas and Happy New Year
Great video brother
Thank you brother
Thank you very much for that. I've been using an angle grinder, not anymore. I'm going to be doing it that way from now on. That's a lot better. A lot safer, less dust and I definitely will use some tape to cover those ends up. Thank you very much. 👍👍🙂🇨🇦
@@ipaddlemyowncanoe.7441 you’re welcome!
I don’t like all that copper dust either.
Thank you for watching 😁
I just cut three of them up the way you showed it. It's a bit of work, but it's a lot better than getting all that copper dust. I'll tell you that much. Thank you again. 👍👍🙂🇨🇦
@@ipaddlemyowncanoe.7441 awesome!
I find once I can get a thicker screw driver in between, it provides much better leverage.
Some come real easy, others seem to be a bit tougher.
Thank you for letting me know how it worked for you.
I don’t know why you’re not collecting the tungsten filament inside the magnetron. It’s a nice little coil in there and will add up pretty quickly if you scrap many of these.
I’ll look into that, thanks.
Thank you for watching.
The thorium is a pretty good catch too, very valuable.
Another radioactive element I think is in there too!
I have a milk crate full. Going to try that. Thanks for sharing
You’re welcome brother! God bless you and your day! Thank you for watching.
Good idea and video!
Thank you very much! And as always, I appreciate you taking the time and watching.
I discovered each end is copper, covered with steel. Instead of jamming the screwdriver in to pop the end off, you can use your wire cutters to peal off the molded sheet steel ends, taking with them the un wanted ceramic ends. I can see the copper end @ 5:30 and 6:40 you left behind. Your magnet is being attracted to the steel wrapping on the backside of the copper. I'm sure all units aren't built the same, but this is what I experienced with second unit I did. Haven't done any since.
@@gdsstudio974 you might double check cause if it’s what I think you’re talking about, that’s copper coated steel under that thin layer of steel. They look like copper but in my experience the magnet always sticks.
@@scrapitall200 I stand corrected. I went into my copper stash and found the two ends, and discovered they are not copper. I don't know how that got by me. Thanks for your feedback.
@@gdsstudio974 they really do look like copper. You’re not alone on that buddy.
Thanks for sharing from the Steel city! Keep on Scrapinn
You’re welcome! Thank you so much for watching!
I know that when I used to work in a government facility that had asbestos in the ceilings, when opening a ceiling tile where asbestos dust could have settled we had to spray around the edge of the tile with a mist of water (from an ordinary spray bottle). I can't remember for sure, but we might have added just a little dish soap too...either way would work. The idea was to dampen any dust to prevent it from going airborne. That might help here, where there is a chance you could crack the ceramic and release micro particles.
That’s a great idea, thank you!
Always good to see a non-electric tool method for dealing with these.
Thank you!
When I first started scrapping I didn’t have any power tools and so I want to show others who might not have them ways to scrap without power tools. Thank you for watching.
3:05 How exactly do you remove that just breaking it with a hammer?
@@jakub3851 you talking about the copper piece that runs through the middle thats attached to one end?
@@scrapitall200 yes
@@jakub3851 just clip what you can with side cutters.
It’s about 1 cent in copper so leaving it behind is an option and not losing much value.
Hope that’s helpful
I cut off that copper tip and that releases the little connecting piece of copper that attaches from the tip to the barrel. Great video brother. Glad the family emergency was dealt with and everything is going to be ok
I’ve tried that before and it still wouldn’t come out. I’ll have to give it a try again, thanks.
Thank you so much, I appreciate that.
Thank you for watching brother.
fajny sposób muszę spróbować👍
pozdrawiam
It works really well!
Thank you for watching buddy.
Awesomeness
Thank you my friend!
What a glorious life you live .
I’m very blessed! Thank you for watching.
Do you throw the ends with the pink caps into regular shred? Thanks for the video!
Yes they get tossed in with all of my shred. You’re welcome and thank you for watching buddy.
@@scrapitall200 Huh?
Ah - I don't think those should go into shred...
[exactly what do you mean by 'regular shred'?]
I believe it needs to go to hazardous waste drop-off...
@@troubleshooter1975 no because it’s not beryllium and scrap yards don’t have a problem with them.
It’s just painted steel with a copper anodized layer.
All copper should be beryllium.
@@pazsion Huh??
That didn't make sense...
You can't anodize copper. And I don't think ANYTHING on a magnetron is painted.
I believe that is copper PLATED steel...
"All copper should be beryllium"?
(I don't know what you mean by that.)
Great idea with the tape.
In a few weeks I am going to try my hand at scraping a microwave for the first time. Is there any other pieces to be careful of
Thank you! The capacitor is the other thing to avoid. They are designed to bleed off any stored up electricity after being unplugged, but if the little piece (you’ll see it attached to the capacitor and grounded to the metal frame) fails it’ll still be fully charged and that will give you one heck of a shock.
So just don’t touch both terminals at the same time.
I do have a microwave video if you need.
Microwaves are fun, easy and you’ll have no problems at all.
@@scrapitall200 Thanks my friend, I do appreciate it. I will check out your microwave video sometime this week
@@GDSavingThePast you’re welcome, anytime bud!
I used to work for the military in the black box repair electronics section, and I can tell you that government magnetron do use beryllium for their insulators in their magnetrons. However, the cost to produce commercial magnetrons would be too expensive to use beryllium for cheap microwave ovens. So I highly doubt you would find beryllium in those... The government actually collected all the old magnetrons for such beryllium collection. Just a little info. I highly doubt any landfill would allow microwave oven disposal if they did contain beryllium... JMHO!
That is great information, thank you so very much!
I don't know about where you live, but here in Australia, there's the possibility that someone might put a microwave appliance in the regular waste bin. I'm told there's a radioactive component in some magnetrons that means it has to be handled specially. These microwaves really should be sent to a proper collection facility in any case, as they're not good for belt systems that are designed to separate different types of waste. Some scrapyards will take them, it seems to depend on whether they're okay with handling radioactive materials commonly used in microwave appliances.
It's the thoriated tungsten filament. It's very small, and the radio activity is very small as well. You get more radiation by taking a 20 minute flight. Radioactive is a big scare monger word that gets tossed around everytime someone discovers that a consumer product contains a very small amount of Radioactive material. The lack of context & ignorance of raradioactivity leads the misinformed into a panic.
Well done! It’s always better when we don’t have to bring out the wheel of carnage. I’ve been previously chucking these but will definitely give this a go 👍🏻
Thank you.
“Wheel of carnage” 😂 I like that.
Thank you for watching
You have a Blessed week James . Thank you so very much for your blessings and prayers each video you are a blessing to RUclips .
Thank you so much!
God bless you and have a wonderful week filled with the joy and peace of God.
Thank you for watching.
Watched again
You rock buddy!
Agree its just a lot of information coming at you thisis one of fthose videos you really need to watch again to fully grasp the information.
Nice video friend.
Thank you! Just subbed to you btw.
Nice! Keep up the great work brother. Healthier the better !
Thank you so much brother.
I winder if a large pipe cutter could be adapted?
That’s a good idea, would be curious to see if it worked.
Thank you for watching.
thanks
COOP
...
You’re welcome and thank you for watching.
Ive always just spray the thing down with wd40 and smash it with a hammer in a bag.. let the bag sit for a bit if your worried or use channel locks in a bucket of water..
Interesting method, thanks for sharing.
Well, that is awesome. I hate grinders so thank you sir
Thank you, I appreciate you watching!
I’m not a big fan of them either.
@@scrapitall200you are welcome
You should have extracted the silver rings as well I don't know the exact alloy name of those that look to be silver...
I’m pretty sure they are not silver but I’m not sure 100%
Gee thx mate, that good idea, cheers Graham
Thank you, Graham!
I have another one coming our for you soon. I have been meaning to make it for about a year now.
Oh? I’m very curious to see what you got. Thank you for watching buddy.
I use meat cleaver for magnetrons. Helps to go down sides & keep rotating.
@@DavidGS66 nice, once I get one I’ll give it a try, thanks!
Nice job
Thank you for watching.
Is the copper you get from the magnetron number 1 or number 2?
That’s a great question. Honestly it depends on the scrap yard. I’ve heard of scrappers getting #1 copper for them, but I get #2 at my yard.
Thank you for watching.
Amen! Thank you, Jesus!
Amen!! 🙏
God bless you.
I have been doing them for years I use knife with a hammer right on the grooves it cuts right off
Interesting. I use a machete to cut stators in half, I’ll have to give that a try on these. Thsnks for the idea!
How do you dispose of the ends
They can be tossed in with steel shreds, which is another reason I don’t believe they’re beryllium. Thank you for watching.
Sorry for my ignorance but what is a magnetron and where do you find it??
They are from microwaves. It’s essentially what cooks the food.
It's a type of vacuum tube that works in the microwave frequency range.
I usually peel back the thin outer layer then pop the ends off with a hammer.
You cut it lengthwise before you peel it? Thank you for watching.
@@scrapitall200 I generally make a small cut just enough to go through the thin outer layer with hammer and chisel. Then get a grip with some cutters and then pry it downward towards the border seal. Once that thin layer is removed around the seal there's nothing holding those plates. So just give them a good pop and they come right out.
@@ironangel667 sounds like a great way to do them, thank you for sharing.
Is that a 4" vise made by Columbia in the late 1950's?
I’m not sure of the brand but I do believe it was made somewhere around the 1950’s.
Thanks for the hack, my friend! Had a bunch of magnetrons tonight, …ScrapNJunk told me to watch your video!
Greetings from Arizona, my friend!
Steve.
@@Salvaging-in-Az thank you so much, Steve!
I’ll have to thank him for that. He’s a great guy.
The copper piece itself is the beryllium as it’s a form of copper alloy.
Those end pieces are ceramic… like a spark plug. Can’t think of any reason they would coat it in a layer of metal oxides it’s just paint. ?
Scrap yards will pay you as copper 1 but beryllium is much more valuable alloy… need to verify it and sell it as beryllium. But it’s less of a hassle to get the scrap price I guess.
I’ll look into all that, thank you!
Can those magnetrons be used for anything useful?
Not that I’m aware of.
Thank you for watching.
Anti drone death ray?
@@matthewday7565 😂😂😂
You can use a pipe cutter. The one with 2 rollers on one side and a cutting disk on the other. Its screw clamps down and you just spin it. It slowly slices the copper and you tighten it more to go deeper.
Interesting idea, thank you, I’ll hate to give that a try. Thank you for watching.
do we really need to hear how a tube cutter works?
@@shaystern2453 Apparently, because he is doing 10 times the work.
Amen brother! 🙏
Thank you for watching!
God bless you too.
I just subbed to your channel
@@scrapitall200 thanks!
@@silver_salvage_savage you’re welcome!
nice one
Thank you!
Great video
Thank you bro and thank you for watching.
What do you do with the parts that may be beryllium?
I toss them into my shred pile. Thank you for watching.
Great way to deal with these. I have been saving them up for processing later the last 3 years, not sure how many I have now.
My idea was angle grinder all the way around on both sides. Your method will save a lot on cutting discs. I'm gonna dig out the crate of magnetron cores I have stored somewhere.
I wasn't subscribed... 😱 how did this happen? Fixed that now 👍
I used to use the cut off discs but it’s messy with the copper dust and it does get expensive.
Thank you so much for watching and subscribing, I really appreciate that.
Happy scrapping buddy.
Great prayer...
Thank you so much! God bless!
not going to mess with them things im too young to die and be my luck i end up hitting it or scratching it lol great video buddy!!
I think they’re probably safe, but I don’t know that for sure. Plus, it’s not a lot of copper in all honesty. Thank you and thank you for watching buddy.
your very welcome my friend keep making them awesome videos@@scrapitall200
@@ScrapMan69 I will and you keep doing the same too!
Awesome trick I always enjoy seeing all these awesome scrapping hacks! Thank you ScrapItAll CheeRs #scraphounds
Thank you so much brother I really appreciate it.
@@scrapitall200 now I have to Thank You again for all that you bring to the scrap community 🙏🏻♻️🐺🤙🏻
@@BushDogScrapper you are too kind brother! God bless you and have a fantastic day!
Is Berrilium marketable?
I have no idea to be honest.
@@scrapitall200Thanks !
if you find out holler.
I will do for sure!
AMEN BROTHER
God bless you brother!
Thank you for watching
45 cents! I'm starting my new scraping career today!
Money is money and it all adds up.
Most hobbies cost money, this hobby actually makes money. Plus, you can’t put a price on having fun. Thank you for watching.
Another thing when dismantling a microwave, there is a high voltage capacitor which can hold a lethal charge for quite some time
Absolutely! I haven’t made a video yet scrapping a microwave, but I’ll be sure to mention that, thank you.
Thank you for watching.
Amen!
God bless you!
Thank you for watching.
Kind of like getting the copper center from computer heat sinks I guess👍
In a way I suppose! Thank you for watching.
That ceramic should be treated the same way you treat any firearm by assuming they are ALWAYS loaded.
Assume that stuff is always beryllium oxide. Shit is crazy toxic.
I know us scrappers think "safety third", but this stuff is one of those rare times we maybe think "safety second"😂. Treat it like asbestos.
I agree, it’s better to assume it is beryllium even though it’s most likely not.
Thank you for watching.
Nice, and I agree with you that you might as well be safe. Especially with older microwaves. From my research, all beryllium oxide is the pink colour, but all pink isn't beryllium oxide.
I actually tried this before but without cutting the initial slit. I squeezed it really tight in the vice and noticed it bulging so I hit the ends with a wood chisel. This looks easier than that, but I think if I have the grinder out, I'll probably just keep cutting it. 😂 I'm lazy.
I tried squeezing them like that once, but nothing good happened 😂
Thank you for watching buddy.
All berillium is not Pink. I have RF transistors that are advertised as having berillium that are all White. The 2N5591 for example. The Cap is aluminium oxide but the base between the semiconductor and heat stud is Berillium oxide.
@@borisj4054 Oh, that's good to know. I only looked up microwave magnetrons, but that could mean that there might be some of them that are white as well.
Absolutely no reason to use cutting tools grinders or anything that creates dust… everything here is radioactive and toxic to ingest.
@@borisj4054 TRUE, for 50 cents and all the labor, I will pass on the berillium, go read what it does to you, and you do not have to breath it in.
Amen.
God bless you!
Thank you so much for watching.
What a big chunck of copper! wow. I hope to find that someday in a microwave :o
They’ll be inside all microwaves 😁
@@scrapitall200 our microwave/oven combination just broke down this week, looking forward to salvaging it. Will watch some video's to see I don't get a shock ;)
@@Stinow just be careful with the capacitor. I do have a microwave video if you need to watch.
Amen!!!
God bless you!
Thank you for watching.
Yeah that makes sense. Sure isn’t as easy scrapping metal as it once was though. I’m getting into welding myself and melting down the scrap metal to use for various tools and things. More money in it my friend. Not too expensive to get into if you DIY most of what you need. Harbor Freight has great prices on welders. Maybe that’s a better way to go for you IDK… thanks for sharing this I didn’t know there’s was that much copper in microwaves TBH.
There’s even more if the transformer is copper and not aluminum.
I want to get into melting copper and sand casting some art, there’s definitely more money in it that way. Thank you for your suggestions and for watching
I found this repugnant! Copper is a cheap metal & you don't destroy a magnetron and the power supply, just to melt it down!
@@ToreMix7400 it sells for an average price of $3 per pound and the microwave it came from was broken. Recycling is a GREAT thing!
@@ToreMix7400 what else can you use a magnetron for? Curious…
Great video, my wife asked "Why can't you just soke the red stuff to reduce the chance of dust". Tape works too, God bless you
Thank you!
That’s a great question. I’m not sure if it’s porous or not, but I love her thinking.
You both are still in my prayers, God bless you too.
No!
It doesn't matter how wet you get it. It is a glass/ceramic.
As soon as you start grinding it (or fracture it), you will raise a trace of dust.
(You'd have to cut it virtually underwater...) I would not do THAT either, how would you dispose of the water?
Eventually you will have surfaces, cutting disks/tools, or containers dry out, freeing the residue!
(And I don't think we want that in the wastewater stream either.)
Beryllium is EXTREMELY toxic, AFAIK.
@@troubleshooter1975 it is which is another reason I don’t believe it’s used in microwaves. Also scrap yards wouldn’t want them since they shred stuff like microwaves and that would be a huge health risk to the workers.
@@scrapitall200 Not porous at all. It is airtight. It is the high vacuum seal while insulating high voltage. It is a ceramic, glass like. Like porcelain.
@@troubleshooter1975 thank you!
Why not use a butane torch to melt the solder?
It’s worth giving it a try, thank you!
45c. ?
Yes. It’s not much but it all adds up and as a hobby scrapper, it’s definitely worth it.
Tossed plenty of those. 🐎✌️
Thank you for watching.