1. Please buy a new drop saw or repair the guard, it can go right a hundred times but it only needs to go wrong once... 2. Pit vipers are not the same as safety glasses, you only get one set of eyes Rick 3. A common hack for pvc rails is to get two different sized pipes, one with the OD (outer diameter) that is the same as the ID of the other and hammer one into the other, getting a double wall pipe that is much stronger
As a blader we always use pvc p rails. Just a little tip use a piece of square fence post or something like that and put it in the middle of the pvc for durability lol
Haha yep Rick said it at the beginning of the video. My friends and I did exactly that. We built a rail to grind on out of pvc pipe. First rail I learned to boardslide was this rail.
Lol me being broke growing up I did the same thing. Worked really well actually. Very slick great for board slides. You can cut them in have in half and use them on the edge of boxes heat them up and mold them flat if you prefer!
First rail I ever built was a 4x4 piece of wood with a pvc gutter turned upside down over the top and 2x4s for stability and height. The gutter was shaped like a curb so it worked for learning slappys too. Plus since it was made to be outside for years it wasnt as brittle as alot of pvc and had some super slick coating. If you've never skated anything pvc then maybe youve never skated at all.
Guys buy a piece of pvc the same diameter as the rail. Make a 1.5 wide rip long way on the pvc the cut an additional 1/4” on each side of the rip to fit around the legs and just snap it right on the rail
If done properly PVC slides amazingly and can easily be used on a rail or grind-ledge as done it myself decades ago with scraps had laying around. Basically what those rails are anyway that people suddenly started using again on their decks we had back in the 80's & 90's.
Back when I was in high school I made a PVC rail for my friends & I , we used it for skateboards & bikes & at the time most of us who rode bikes had metal pegs & you want to talk about buttery & 16 foot long rail out of PVC way scarier than metal with wax .
back in like 2004 i made a pvc rail with 2x4s and 1 10ft section of 4" pvc, drilled holes in the top of the pvc to screw into the wood under it, it worked great for years and was super cheap. i built it high enough to keep noobs off it, because all they would do is ride into our other rail and knock it over instead of ollieing and landing on top of it.
Just Ordered a creature complete im going to start skating Last Time i did i was 13 now im 17 very hyped thanks Braille for making cool and interesting content
Rollerbladers always make these. Wood and a single pipe of PVC. There are no trucks though so it doesnt break easy and it slides like butter zero friction.
Guys PVC has been done so many times even Dan Corrigan has a video of doing one with free stuff... Try! A knurled rebar flat rail! Imagine the sensation of all the groves while grinding
6:219:16 and 8:10 is my proof that this rail should be called the tilted hahah I mean the rail is tilted plus both glo and Nigel’s hats got tilted by it haha
Same! Then when my friends and I got better we upgraded. We made a taller wooden frame, then screwed a railing from an old bedframe to the top. It worked well for us.
Cellular core is (foam core) it's weaker than Solid core poly vinyle chloride (cheaper duh but if you care to have stronger pipe.. Just a tip for the future guy's , much love.
Is there anyway I, who lives in Texas, could work for you guys? Im very skilled in music production, knowledgeable in video production & editing, a forklift license, a CDL, I'm already currently employed with a government job, & I believe in this brand, the positivity it can generate, & would like to be a part of it as a part time gig. Anything I can do to help?
WE ALL STILL LOVE & MISS YOU @UZIWALKER ❤️ 💕
I love the positivity that Rick brings to almost every video
1. Please buy a new drop saw or repair the guard, it can go right a hundred times but it only needs to go wrong once...
2. Pit vipers are not the same as safety glasses, you only get one set of eyes Rick
3. A common hack for pvc rails is to get two different sized pipes, one with the OD (outer diameter) that is the same as the ID of the other and hammer one into the other, getting a double wall pipe that is much stronger
Thank you for commenting this, I just seen a coworker cut his hand off at work and watching him do that always scares me.
Love the positivity Ricky!
As a blader we always use pvc p rails. Just a little tip use a piece of square fence post or something like that and put it in the middle of the pvc for durability lol
Braille needs more skaters from Australia
Yes
Awesome
Haha yep Rick said it at the beginning of the video. My friends and I did exactly that. We built a rail to grind on out of pvc pipe. First rail I learned to boardslide was this rail.
Love you too Glo!
I requested this ages ago!! ✌🏼✌🏼
Hope you like it!
Lol me being broke growing up I did the same thing. Worked really well actually. Very slick great for board slides. You can cut them in have in half and use them on the edge of boxes heat them up and mold them flat if you prefer!
Right on
You Guys are awesome! Been Watching From the beginning! Yall keep killing it!@@brailleskateboarding
I figured you guys would be able to slide on this rail, but I didn't think it'd be possible to grind! Too cool lol. Fun video!
This is how we do it on the ski/snowboard side of things for backyard summer setups! 😁🤘
you guys should do nose blunt dubble heelflip out on the pvc
First rail I ever built was a 4x4 piece of wood with a pvc gutter turned upside down over the top and 2x4s for stability and height. The gutter was shaped like a curb so it worked for learning slappys too. Plus since it was made to be outside for years it wasnt as brittle as alot of pvc and had some super slick coating. If you've never skated anything pvc then maybe youve never skated at all.
Guys buy a piece of pvc the same diameter as the rail. Make a 1.5 wide rip long way on the pvc the cut an additional 1/4” on each side of the rip to fit around the legs and just snap it right on the rail
We all love Rickie and it’s a build video gonna be awesome 🎉
Back yeah Ricky lets go
If done properly PVC slides amazingly and can easily be used on a rail or grind-ledge as done it myself decades ago with scraps had laying around. Basically what those rails are anyway that people suddenly started using again on their decks we had back in the 80's & 90's.
Ricky: you can call me shehulk
Me: nah man Ricky's heman
You're assuming his gender and forcing your gender norms. That attitude is absolutely not welcomed in the gayborhood. 😂
Back when I was in high school I made a PVC rail for my friends & I , we used it for skateboards & bikes & at the time most of us who rode bikes had metal pegs & you want to talk about buttery & 16 foot long rail out of PVC way scarier than metal with wax .
5:36 Nigel…. It’s wax. It goes on and comes off very easily. This shouldn’t be blowing your mind.
My life will never be complete until I see Derek do a kick flip.
Same
Glo had 5 seconds of shine in the beginning and said nothing but love 10/10 favorite skater❤️
We love glo
Glo boarder 🗣️💯💯
Much love
Glo is love
this is crazy and cool video Braille
Gabe vs Rodney Mullen 😊
Im here for it
@@brailleskateboarding he’d spank you with your construction gloves 🧤
Ricky is back!
Ricklas Glaser likes pvc
We did a similar build but expanding foamed the inside of pipe to strengthen it a bit
smart
LOVE the HAT Glo
back in like 2004 i made a pvc rail with 2x4s and 1 10ft section of 4" pvc, drilled holes in the top of the pvc to screw into the wood under it, it worked great for years and was super cheap. i built it high enough to keep noobs off it, because all they would do is ride into our other rail and knock it over instead of ollieing and landing on top of it.
Glo is such a G
When I try to kickflip my front foot will land on the side but my back foot is on the board can you help me?
I recommend against pvc. It’s very slick. If you are new to slides practice on anything else first.
I cannot wait to use pvc to frame a tarpshack in my backyard to store my cars in now thag I know it’s half decently strong
Used pvc for coping on mini ramp. Always worked perfect just doesn't have the cool metal grind sound
Derek Kickflip 💯
Also Gabe drop in 💯
As someone with the same hair as Rick can we get the hairstyle tutorial on this hair due in start of the next vid haha 🙏🏽🙏🏽
always amazing
Used to watch this 4years before, goof old times🥰
Yes Derrick lets see the kickflip
WE LOVE YOU TOO GLO
Big Ice is cheeked up, no cap. He built like a Pixar Mom
If you fill the PVC with expanding gap filler foam, it gets stronger if you’re looking for more longevity in the build.
should just go all out and get or build a snowboard slide box. maybe try to get a C Box or something lol... can buy sheets of the plastic probably.
Nice shades Rick I had a pair they got stolen
plz have omni directional wheels and board slide but dont turn at the end
Just Ordered a creature complete im going to start skating Last Time i did i was 13 now im 17 very hyped thanks Braille for making cool and interesting content
That is awesome!
I'm pretty sure all the houses Gabe builds burst into flames in the first week at this point.
Next DIY challenge would be to build quarterpipe from scratch.
Derrick should tell Gabe he will kickflip when Gabe drops in on vert
Rollerbladers always make these. Wood and a single pipe of PVC. There are no trucks though so it doesnt break easy and it slides like butter zero friction.
Guys PVC has been done so many times even Dan Corrigan has a video of doing one with free stuff... Try! A knurled rebar flat rail! Imagine the sensation of all the groves while grinding
gab and vert, WHEN?
6:21 9:16 and 8:10 is my proof that this rail should be called the tilted hahah I mean the rail is tilted plus both glo and Nigel’s hats got tilted by it haha
You should try this again with a bigger pipe say 6" round should do it and you could just use the pipe by itself.
That australian killed that Pipe set up
yo im just starting out but ima try this
I did this in the 90s. Yet i didn't have an actual rail underneath. I used wood.
Same! Then when my friends and I got better we upgraded. We made a taller wooden frame, then screwed a railing from an old bedframe to the top. It worked well for us.
# Gabe Cruise drops in on the vert ramp 2024.
Cellular core is (foam core) it's weaker than Solid core poly vinyle chloride (cheaper duh but if you care to have stronger pipe.. Just a tip for the future guy's , much love.
Brail is slowly becoming just Gabe building stuff
# Gabe drop in
N yes # Derick kickflip
PVC pipes are underrated.. they work great if it’s all u have lol .. I made 2 already
🔥
Whats going to come first? Derek's kickflip or Gabes drop in😂
The Rick and Glo in this vid compared to when they started, love to see it.
Haha
Build a rail, first step;
Take your premade rail, and add more rail to it.
Is there anyway I, who lives in Texas, could work for you guys? Im very skilled in music production, knowledgeable in video production & editing, a forklift license, a CDL, I'm already currently employed with a government job, & I believe in this brand, the positivity it can generate, & would like to be a part of it as a part time gig. Anything I can do to help?
Wow I built a few of those Poly Vinyl Chloride rails in the early and mid 90's
Bro broke out PVCs government name lol
I'm 50 yrs old. most people don't know what that stands for.
why rick tried to play nigels pro board??
Drop in Gabe.!
also any akaters got some cool parks in england
How does glo need wax on everything hit this, and everyone else. Reds wax on this?????
Hahaha
I watched this video 2 times i liked that music
the question is not "if" Derek will kickflip, but "when". just like "when" Gabe will drop in.
My cousin built one using the Grey cpvc pipe it's stronger than regular white pvc lasted us years if anyone plans building one use the gray
Using a real rail as a base makes the whole thing feel pointless haha. At least it's fun!
ricky they need to add a shower at the braille house
Video idea: testing temu skateboard products/boards
We did that check the video
Video idea: grip tape rail, first to break the board doing a normal board slide wins
If you didn't throw a big PVC pipe down in the grass running off the concrete and do a bunch of 50/50 and 50s as a kid you didn't have a childhood 😆
Derek and Gabe sit the exact same way when recording
spooky
Skate every thing
no pvc pov?
Glo stopped hitting the gym?
Derek vs Gabe Derek has to kick flip and Gabe has to drop in on vert 😅
I want to see Derrik kickflip
FIRSSSST TRYYYYYYY
Under 5 min means braille must like my comment
Liked
I used to skate at a construction site and they would have pvc pipes laying around and I'd boardslide them
Sick
I know I made a comment about this. But I think mine was just to use big pvc as a cover
Richard PVC Piper
If the PVC pipe cracks or breaks, you're not using pipe with thick enough walls.
True
Hey, braill, can i please get a new deck? Mine broke, and i odnt have that much money
Braille save this guy from buying a $15 Walmart board
Try working. You get money for it. Then you can spend it on skateboards. Or I guess just shamelessly beg for stuff. If that works, let me know.
I used to cut grass as a kid to get money for boards and shoes. If you're dedicated, then make it happen.
Try mowing lawns and do odd jobs around your neighborhood. Don't be like Duane Peters😮
Yeah that works but still ask for stuff eventually you'll get it lol I got a free car once just for asking
Get Austinskate10 a board like if agree
Looks like you added pvc on top of an existing rail
Community alert. Original Blind Video Days VHS just went to auction on eBay.
Wow sick
yo whaaaa
A 20 foot feeble on some PVC would be sweet