DIY 3D printed pinball - Flipper close up and instructions
HTML-код
- Опубликовано: 16 янв 2025
- I made a video about the Flipper assembly, this is more technical the my prvious ones.
The STL's for the Flipper assembly is available at Cults 3D:
cults3d.com/de...
cults3d.com/en...
Check out my other DIY Pinball videos: / @fabe1690
I will SO use your videos as a guide... Thanks a lot Wilfried!
THX!
Love the precision and the use of templates here. Some day I envision a kit with all the hardware then we can just print all the rest ourselves!
Thanks!! You already can start to print major Parts of a Pinball -> cults3d.com/en/users/wilfriedfabian/3d-models Regards!
Super, dass du so ein detailliertes Video zu dem Aufbau gemacht hast. Sehr inspirierend :)
(Ich sollte mich wirklich endlich einmal überwinden meine Fortschritte ebenfalls hier zu teilen.)
Hi Hendrik, ja mach mal auch ein Video - ich bin sehr neugierig!
This is awesome and already purchased. With slightly smaller scaling, an Arduino, sound module and a few relay boards, a hobbyist could convert one of the Star Wars toy type pinball into decent machine that kids would be glued to.
Thx, good luck for your project!
Fabe gracias ya los baje ... genial .... lo que si no biene el plano que colocas sobre la madera .... lo podrias facilitar a la escala que tu lo hiciste .... gracias
Great job 😊
Thank You!
Cool to see a custom pcb for pwm and overheat control! Why did you opt for two non pinball brand solenoids to fire each flipper? Was that to generate enough force from 12v coils? Why not go 24v coils or 48v pinball coils? Im currently trying to make these decisions myself for my own build using arduino.
Hi, i used this Solenoids because they are quite affordeable, and smaller than original Pinball Solenoids. I use 12V Solenoids with 30V to get enough power out of them (must portected from getting too hot!!!), using a 24V Solneoid on 30V will cause lower Powerm because 24V Coils have a higher resistance than 12V Coils, Regards, Fabian
@@fabe1690 Looks greatm but why use two solenoids and not one? Is there not enough fling from just one solenoid? Great work by the way!! ;O)
Muito bom, eu aqui novamente querendo saber mais informações, você usou dois solenóides para ter mais força, ou e para fazer o reverso do flipper, e esta placa que vc usa qual seria e para que serve, de novo parabéns pelo trabalho eu vou me inspirando para fazer a minha maquina, obrigado.
Thanks! All STLs and also an example of the electronic circuits are available here, there is also a detailed 25-page manual in English. It's best to order it - at the end of the day it saves you a lot of money and tedious testing. Greetings from Vienna, Fabian
cults3d.com/en/3d-model/game/pinball-flipper-wilfriedfabian
Obrigado! Todos os STLs e também um exemplo do circuito eletrônico estão disponíveis aqui, há também um manual detalhado de 25 páginas em inglês. É melhor encomendá-lo - no final do dia, você economiza muito dinheiro e testes tediosos. Saudações de Viena, Fabian
cults3d.com/en/3d-model/game/pinball-flipper-wilfriedfabian
Perfect! Nice done. Did you make the Flipper circuit by your selv?
Thanks! Yes, i designed the circuit and the PCB for it myelf.
awesome !!!
THX!
Opa tudo bem, só eu de novo gostaria de saber sobre os arquivos do spinner, e também drop target pinball, se esta junto com os arquivos do flippers STL´s ou vc vai disponibilizar em outro arquivo STL´s para eles obrigado.
Olá, publicarei várias assembleias sobre Cultos de tempos em tempos. Atualmente estou trabalhando na descrição do Drop Target. Eu faço spinners etc. depois. Mas ainda vou precisar de 2-3 semanas para a meta de queda, o que consome muito tempo. Saudações Fabian
Hello, I will publish various assemblies on Cults from time to time. I'm currently working on the Drop Target description. I make spinners etc. afterwards. But I will still need 2-3 weeks for the drop target, that is very time-consuming. Greetings Fabian
Obrigado, no nomento eu não estou mexendo no meu projeto, que seria a replica da Vortex da Taito que e copia da (BLACKOUT) eu estou usando motor de trava de porta de carro mais quero fazer igual este seu ai achei melhor ,vou comprar os arquivos STL seu ,vou aguardar os outros para voltar a trabalhar no pinball. Valeu Obrigado.
Hello >>Fabe
Hello Julio, drop me an Email. Lets see how to fix that. My MailAdress you can find it here -> www.youtube.com/@fabe1690/about (works obly from PC and not Mobile Devices).
Regrads, Fabian
Could you let me know the characters of solenoid have you used?
Hello Victor, i used KK-1039B Solenoids rated 12V. Greetings, Fabian
how much is the weight of the ball?@@fabe1690
Hello, sorry i missed your comment. The Stell Ball has a diameter of 21.5mm, the weight is about 22g.
Plan on paper scale 1.1 tendras para compartirlo
Hola Rafael, haz clic en el enlace.
ruclips.net/channel/UCslqPIETxmdDFjaZh2wiBRAabout
Luego haga clic en "Mostrar correo electrónico", luego verá mi dirección de correo electrónico, envíeme un breve correo electrónico y le enviaré las pegatinas y una foto del plan.
saludos fabián
Awesome!
How did you manage to not crush the return springs without using coil stops?
Thank you!
@@jnkmal9519 Hello, i do not understand your question 😞 - i'm not a native english speaker.