If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
I don’t understand why you just don’t wait for the replacement door and then put the sticker on to keep it consistent but regardless it’s looking really good love the channel by the way
Here in the US I received the same Pack 91 right front door that you did. However I was not notified by Eaglemoss about the corrected version of this door. I contacted Eaglemoss here and they don't have a clue as to what I was talking about. The only response I got from them was they planned to send me an exact replacement for the door I already have. Go figure. I still plan to hold off building Stage 25 and see if the corrected door is sent around Pack 107.
The wing mirror for that side should be mounted on the wing just ahead of the windscreen, so there was a mirror on that side but it wasn't on the door.
about the quarter panels ,i hope the skirts are removable (i build the neglected dirty version of the 2nd movie,and there's no skirts on the quarter panels)
2 days till I am caught up with you on pack 3, you said you messed up the main engine build? At least the part you plug the engine into with the male headphone jack like adapter is in good condition so you can continue your build according to the instructions
Only just started building, as I ran out of room after 1.5 years worth of storing it all. Loving it so far but finding that since I started using abit of 3-1 oil they seem to cross thread easier than without it??
seems to me all they need to do is make a plug that is the same shape as the bottom of the mirror mount, but flush on the top. one screw to remove the mount and pop the plug in.
I'm surprised they're sending a brand new door to fix that mistake. Surely it would have been easier to just make a white plug to fit in place of the mirror or something. That seems odd, especially given how they never bothered to fix the flux capacitor in the DeLorean
That's honestly what I was thinking they should've done instead of redoing the entire part. Smaller, easier, and more than likely cheaper than just redoing the entire thing. Sure there'll be grooves from where you can see the hole, but you can overlook it easier.
Hi Wayne I'm actually 3 months behind the stage your on now so do you think that by the time I get to this stage the door I receive will be the correct one ? Just a thought and thanks mate 👍
Great video, Wayne!! Any idea when you’ll get Pack 8 (I call it Magazine 8), for you guys? In my second Top-Up Offer I am two stages into Pack 9 (Magazine 9), in which includes the PCB for the upper saucer section LEDs. Hoping this month I’ll get the final two stages of Pack 9 (Magazine 9) and all of Pack 10 (Magazine 10).
That's insane. They should know the door doesn't have the wing mirror, because the mirror mount should already be installed on the right fender by this stage. Someone in the factory just got fired for this screw up.
I don't think any of your fans would have blamed you if you skipped this part of the build till the right door came, a simple video explaining the issue would have been fine for me.
Was going to ask if you'd got that email too. How come you're not showing what's coming in the next issue anymore? Eaglemoss asked you not to spoil the surprise anymore? Lol
Good health to you my englishe friends! Let me pass you up, all of you fellow! Rest easy, do not stress, not even the slightest! Sorry my englishe is very carzy, i am estonia my feelings are, as usual, what is the ghost bust? what is this little car? i have a very large confuse, what is all this ghost business? my uncle Lembit in Tallinn had ghost in his workshop, it give him a very large anger so he call priest why this gentle man construct very small car?
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
I don’t understand why you just don’t wait for the replacement door and then put the sticker on to keep it consistent but regardless it’s looking really good love the channel by the way
Here in the US I received the same Pack 91 right front door that you did. However I was not notified by Eaglemoss about the corrected version of this door. I contacted Eaglemoss here and they don't have a clue as to what I was talking about. The only response I got from them was they planned to send me an exact replacement for the door I already have. Go figure. I still plan to hold off building Stage 25 and see if the corrected door is sent around Pack 107.
I like having the mirror. I'll just think of it as an after market install.
Oh my Gawd That siren every step is driving me nuts lol
I love these videos of the Ghostbusters
Hi world of wayne the decal looks good on the ecto1 it stands out
i love the build up of the ecto-1 bc its my favorite movie car aside from K.I.T.T. and the general lee
The wing mirror for that side should be mounted on the wing just ahead of the windscreen, so there was a mirror on that side but it wasn't on the door.
Got your channel as recommendation by the almighty algorythm and decided to stay 😎
Gotta love that algorithm
It's the best start to take a look at how it's done lol . Or the ecto 2? Lol
Take the mirror off fill in the slot on the door with bondo or putty or j b weld?
about the quarter panels ,i hope the skirts are removable (i build the neglected dirty version of the 2nd movie,and there's no skirts on the quarter panels)
Hi wayne I'm going to wait for 107 before I build the right door then it would save me having to take it apart and redo it
I enjoy a lot all your videos Wayne but everytime I regret not having the posibility to build it also in The Netherlands. Take care
i actually like the look of the mirror and the decal size on the door
2 days till I am caught up with you on pack 3, you said you messed up the main engine build? At least the part you plug the engine into with the male headphone jack like adapter is in good condition so you can continue your build according to the instructions
Looks great Wayne, too bad that you're going to have to take it all apart again.
Putty for metal, Dremel, paintbrush and the mirror hole on the door is no more :-D
Awesome
Only just started building, as I ran out of room after 1.5 years worth of storing it all. Loving it so far but finding that since I started using abit of 3-1 oil they seem to cross thread easier than without it??
Never had a cross thread problem to be honest.
the wing mirror i would just not add the wing mirror and keep the original door on so the new one would be a spare one if the other one broke
I got my issue, not happy eaglemoss decided to not include hinges to the door or screws either.
What happened to them applying the sticker to the door before sending out like they stated after the debacle last time?
I forgot about that
I would advise builders to complete this issue when the replacement door arrives with Issue 29. Installing and removing parts is never a good idea.
seems to me all they need to do is make a plug that is the same shape as the bottom of the mirror mount, but flush on the top. one screw to remove the mount and pop the plug in.
Too true
Hmmmm....sounds to me like those of us with a Wing Mirror Passenger Door might have a rare option.
I'm surprised they're sending a brand new door to fix that mistake. Surely it would have been easier to just make a white plug to fit in place of the mirror or something. That seems odd, especially given how they never bothered to fix the flux capacitor in the DeLorean
Definitely.
That's honestly what I was thinking they should've done instead of redoing the entire part. Smaller, easier, and more than likely cheaper than just redoing the entire thing.
Sure there'll be grooves from where you can see the hole, but you can overlook it easier.
Hi Wayne I'm actually 3 months behind the stage your on now so do you think that by the time I get to this stage the door I receive will be the correct one ? Just a thought and thanks mate 👍
Woot getting closer to complete the Ecto1
Its a wing mirror support without the mirror itself?
Yep
Is the only difference between the mike lane and the eaglemoss sticker is size? Which one is more movie accurate? Thanks!
There are lots of debates on it. Check out the Ghostbusters Facebook group.
Great video, Wayne!! Any idea when you’ll get Pack 8 (I call it Magazine 8), for you guys? In my second Top-Up Offer I am two stages into Pack 9 (Magazine 9), in which includes the PCB for the upper saucer section LEDs. Hoping this month I’ll get the final two stages of Pack 9 (Magazine 9) and all of Pack 10 (Magazine 10).
Its on the channel tomorrow morning
when did they update this? I have not received anything from EM on the door issue.
I had an email about 3 weeks ago
I just received my next set of issues and I have the same problem should I just leave it or get in touch with fanhome🤔🤔
I think it gets fixed automatically later on
@WorldofWayneUK have requested a replacement
That's insane. They should know the door doesn't have the wing mirror, because the mirror mount should already be installed on the right fender by this stage. Someone in the factory just got fired for this screw up.
I don't think any of your fans would have blamed you if you skipped this part of the build till the right door came, a simple video explaining the issue would have been fine for me.
Are we getting the wing mirror for driverd side wayne
I hope so lol
Was going to ask if you'd got that email too. How come you're not showing what's coming in the next issue anymore? Eaglemoss asked you not to spoil the surprise anymore? Lol
Lol. I clean forgot
I would have just said screw you eaglemoss and slapped some putty with white gloss paint Lol - From Smores
👻👻👻
fill the hole with epoxy and touch up.
Good health to you my englishe friends! Let me pass you up, all of you fellow! Rest easy, do not stress, not even the slightest!
Sorry my englishe is very carzy, i am estonia
my feelings are, as usual, what is the ghost bust? what is this little car? i have a very large confuse, what is all this ghost business? my uncle Lembit in Tallinn had ghost in his workshop, it give him a very large anger so he call priest
why this gentle man construct very small car?
🍻🍻🍺👍🙏🙏💞💞🐕🐕🇦🇺🇦🇺
Lol