Highly Scientific Reception Test! (NOT :P) The radio: www.horusrc.com/en/new-new-frsky-tandem-x20-hd-transmitter.html The quad I flew: droneshop.nl/foxeer-foxwhoop-25-pnp-teal The Hawkeye 10" monitor: nl.banggood.com/Hawkeye-Little-Pilot-Captain-10-inch-IPS-1280x720-1000lux-5_8G-48CH-Diversity-DVR-FPV-Monitor-3S-6S-for-RC-FPV-Racing-p-1838478.html?p=TO251813974002015038
Following this with interest. A simple folded black card shroud around three sides of the FrSky screen would remove the glare at the angle the tx is held at, and would then be comparable with your other monitor. It's a pity they didn't include something similar. Other providers in the past have had a foldout approach. Keep up the good work.
Yes.. to be clear: the glare didn't bother Me.. it mostly bothered my camera... I'm also glad Frsky didn't do what Flysky did with the PL18: a cheap ass plastick ugly sunshield :) Something might come in handy indeed though :)
Thanks as always brother :) Yeahhhh I did ofcourse consider getting that monitor but it's much smaller then the monitor I already have.. IF it would have has an internal battery I'd order it :) Cheers and have a good week!
I think that the concept is really interesting as it allows the pilot to just focus on the transmitter (and the airplane, obviously), instead of messing around with a lot of additional equipment and cabling. However, the OSD is really simplistic, and I would love to have some more information (e.g. on the altitude, etc.). I wonder how such a setup compares to a solution with the SIYI MK15 FPV (which I am currently working on), as the SIYI set is coming at 700-800€ (depending if you want HDMI), while only the X20HD transmitter is around 700€. Especially for drones (and VTOL hybrid UAVs), the non-centring thrust gimbal is somewhat tricky...
With the ideal firmware in the radio, the display will simply show the OSD that is setup in the drone.. So ultimately you would then have 100% control over what is and isn't shown :) Having said that: I don't know if the radio's processor would be able to handle that :$ For now I think Frsky has chosen a (indeed) very simple setup with the intend to show the FPV video and not much more...
Great review of the Tandem HD 20S. Love the concept where I may wish to fly without extra gear (goggles to pack) - i.e. all in one solution. Hopefully, RadioMaster can come up with something like this since the firmware would likely be opensource.
Thank you very much! :D I have no idea if RM has plans towards something like this.. You would Need to have the screen above the sticks.. other ways around would not really work well.. But to be honest: I do have the latest (and most $$) TX16S but the build quality is nowhere near this Frsky radio
Hey, Thank you for the video. I'm getting mine next Monday or may be even sooner. Will open it and see if it has any upgrade port for vtx and also an sd card slot for upating itself to me the module inside this is same as the new skyvision monitor that they launched
I'm still planning to do "that" video but haven't gotten around to it.. I also wonder if I can show what near that HDMI out as I don't know how to take the screen apart :P Ohw well! We will see what we see.. You have that new monitor? (I don't )
No dvr did I understand correctly? It looks like hawk eye set up with X20 S is what I’d prefer now ,I’m so confused I need to watch your videos again 😂❤
Haha you ARE correct.. the radio doesn't record DVR's.. And yep I got me this X20HD because I like gatgets & wanted to test the setup.. But in reality I use the X20S most of the time :$
Sir what can you tell me about such a 3 in 1 transmitter? If the control range is more than 60 kilo meters, which supports Pixhawk, I can connect my smartphone to that transmitter and see all the data or camera live on my screen.😶
What 3 in 1 transmitter? This is a Tandem radio.. (tandem as in Two) and it is certainly not a multi-protocol setup. I don't really know the maximum range, but it's not 60KM.
I can’t figure out how to get my radio to show the fpv screen. Could you maybe link a video of how to set it up to be able to receive video. I couldn’t find one.
I haven't seen video's eighter.. I think the first step would be to make sure you are on the latest firmware for the radio AND the video-subsystem.. beyond that I just randomly try things until I get a picture :P
Howdy :) wel basically all their modern 2.4Ghz and 900Mhz can be used with the Tandem radio's. From looking at their site that would be the R9 MX receiver for long-range. I should add that I don't use it myself (I use Crossfire & ELRS most times)
@@eddyultra1 this video will give you some insight into what ELRS modules will work: ruclips.net/video/bO5PWkJr0nU/видео.html Any Crossfire module with the micro-JR interface will fit / work
Very different systems. The Skyroid is more aimed at autonomous systems / pixhawk use. Yes the X20 ofcourse has telemetry and can be used with Pixhawk (most any radio system can)
Highly Scientific Reception Test! (NOT :P)
The radio: www.horusrc.com/en/new-new-frsky-tandem-x20-hd-transmitter.html
The quad I flew: droneshop.nl/foxeer-foxwhoop-25-pnp-teal
The Hawkeye 10" monitor: nl.banggood.com/Hawkeye-Little-Pilot-Captain-10-inch-IPS-1280x720-1000lux-5_8G-48CH-Diversity-DVR-FPV-Monitor-3S-6S-for-RC-FPV-Racing-p-1838478.html?p=TO251813974002015038
Following this with interest. A simple folded black card shroud around three sides of the FrSky screen would remove the glare at the angle the tx is held at, and would then be comparable with your other monitor. It's a pity they didn't include something similar. Other providers in the past have had a foldout approach.
Keep up the good work.
Yes.. to be clear: the glare didn't bother Me.. it mostly bothered my camera...
I'm also glad Frsky didn't do what Flysky did with the PL18: a cheap ass plastick ugly sunshield :)
Something might come in handy indeed though :)
Awesome flying and review, dude! 😃
Now they also have a monitor with the HDZero receiver!
Anyway, stay safe there with your family! 🖖😊
Thanks as always brother :)
Yeahhhh I did ofcourse consider getting that monitor but it's much smaller then the monitor I already have.. IF it would have has an internal battery I'd order it :)
Cheers and have a good week!
Nice quadcopter and nice test!
Thanks mate :) You can have the quad when I'm done with the tests :)
I think that the concept is really interesting as it allows the pilot to just focus on the transmitter (and the airplane, obviously), instead of messing around with a lot of additional equipment and cabling. However, the OSD is really simplistic, and I would love to have some more information (e.g. on the altitude, etc.).
I wonder how such a setup compares to a solution with the SIYI MK15 FPV (which I am currently working on), as the SIYI set is coming at 700-800€ (depending if you want HDMI), while only the X20HD transmitter is around 700€.
Especially for drones (and VTOL hybrid UAVs), the non-centring thrust gimbal is somewhat tricky...
With the ideal firmware in the radio, the display will simply show the OSD that is setup in the drone.. So ultimately you would then have 100% control over what is and isn't shown :)
Having said that: I don't know if the radio's processor would be able to handle that :$ For now I think Frsky has chosen a (indeed) very simple setup with the intend to show the FPV video and not much more...
interesting! did notice quite a substantial difference in reception. mostly then you flew the quad lower down
thanks for the insight bro!
Yes in hindsight I also noticed there was a bigger difference at points.. And indeed when I flew the quad low
Great review thanks
Thanks sir :) Highly appreciated
Great review of the Tandem HD 20S. Love the concept where I may wish to fly without extra gear (goggles to pack) - i.e. all in one solution. Hopefully, RadioMaster can come up with something like this since the firmware would likely be opensource.
Thank you very much! :D
I have no idea if RM has plans towards something like this.. You would Need to have the screen above the sticks.. other ways around would not really work well..
But to be honest: I do have the latest (and most $$) TX16S but the build quality is nowhere near this Frsky radio
Hey, Thank you for the video. I'm getting mine next Monday or may be even sooner. Will open it and see if it has any upgrade port for vtx and also an sd card slot for upating itself to me the module inside this is same as the new skyvision monitor that they launched
I'm still planning to do "that" video but haven't gotten around to it.. I also wonder if I can show what near that HDMI out as I don't know how to take the screen apart :P
Ohw well! We will see what we see..
You have that new monitor? (I don't )
No dvr did I understand correctly? It looks like hawk eye set up with X20 S is what I’d prefer now ,I’m so confused I need to watch your videos again 😂❤
Haha you ARE correct.. the radio doesn't record DVR's.. And yep I got me this X20HD because I like gatgets & wanted to test the setup..
But in reality I use the X20S most of the time :$
Hi, I have x20 HD with HDZero v2. I can't get any Video the only thing I see is the Frequency 5058,50fs. What I'm doing wrong?
Pfew! I can't try that on my end.. I would ask in the X20 topic on RCGroupd about this (or ask Frsky on facebook)
Sir what can you tell me about such a 3 in 1 transmitter?
If the control range is more than 60 kilo meters, which supports Pixhawk, I can connect my smartphone to that transmitter and see all the data or camera live on my screen.😶
What 3 in 1 transmitter? This is a Tandem radio.. (tandem as in Two) and it is certainly not a multi-protocol setup.
I don't really know the maximum range, but it's not 60KM.
I can’t figure out how to get my radio to show the fpv screen. Could you maybe link a video of how to set it up to be able to receive video. I couldn’t find one.
I haven't seen video's eighter.. I think the first step would be to make sure you are on the latest firmware for the radio AND the video-subsystem..
beyond that I just randomly try things until I get a picture :P
@@DutchRC thank you
hi. can you say what receivers are compatible for 5 inch drone with FrskyTandem radio for racing-long range ?
Howdy :) wel basically all their modern 2.4Ghz and 900Mhz can be used with the Tandem radio's. From looking at their site that would be the R9 MX receiver for long-range.
I should add that I don't use it myself (I use Crossfire & ELRS most times)
@@DutchRC in this case what module will fit for crossfire and or ELRS? for Tandem radio?
@@eddyultra1 this video will give you some insight into what ELRS modules will work: ruclips.net/video/bO5PWkJr0nU/видео.html
Any Crossfire module with the micro-JR interface will fit / work
What is range ?
Which one is best
Skyroid m12l vs frsky tandem x20 pro 😢😢😢😢
X20 pro have data telemetry?
It work with pixhwk 😭
Very different systems. The Skyroid is more aimed at autonomous systems / pixhawk use.
Yes the X20 ofcourse has telemetry and can be used with Pixhawk (most any radio system can)
I think unless you're a racer then dji is the way to go.
Oh, and what if you are a freestyler? For me DJI is on the rock-bottem of my wishlist as freestyle fpv-pilot. Basically, I am not interested in DJI.
The DJI setup is great :) but I would at least want to use HDzero as a replacement for analogue setups.. And as mention: for FPF airplanes
Someone needs to design a 3D print set of Box Goggles these can slide into with adjustable accordian style sliding view distance.
that someone could be YOU :)
Praat gewoon Nederlands AUB is veel leuker dan leer ik er ook wat van
ja leuk.. NOG minder views.. dan kan ik net zo geen de video helemaal niet opnemen..