FULL CAMPER CONVERSION: How to install 230V and Hook up with a VICTRON inverter / charger.

Поделиться
HTML-код
  • Опубликовано: 29 ноя 2024

Комментарии • 6

  • @h200389beerjackd
    @h200389beerjackd Год назад +1

    You can tell how much time you've spent on this by how neat it is 👍

    • @richard_builds_it
      @richard_builds_it  Год назад

      Thanks - yeah i reckon it took me about 40 hours in total for the entire system - breaking the solar panel was the worst

  • @Marchoso.Benito
    @Marchoso.Benito 11 месяцев назад

    Hello, thanks again for this super tutorial, but you say that you will put a wiring diagram in the description, and I can't find it.
    Can you send it to me or upload it?
    Thank you.

    • @richard_builds_it
      @richard_builds_it  11 месяцев назад

      there’s two one for the whole system and one for the RCD and MCBs I’ll upload soemthing shortly and let you know where it is.

  • @UKsystems
    @UKsystems Год назад

    Just be careful with the MCB ratings for the sockets as some inverters can get damaged if ratings are wrong (it looks like you are ok) just to note USB sockets use power so they can run the battery down if parked in a garage / shade for a long time.

    • @richard_builds_it
      @richard_builds_it  Год назад +1

      hey thanks for the heads up - I used a website who have done all the calculations and then they send me the RCBs and MCBs for the set up so should be okay! I’m glad I didn’t have to do all the calcs myself! do you mean my double USB socket will pull power when parked? how long we talking? I mean the system will be on when I’m out walking but when parked on the driveway all MCBs and RCBs are turned off so they shouldn’t draw anything. I also installed a solar breaker so no power is going round the circuit when parked and not being used.