Hey everyone, hope this helps someone in learning one of the most under appreciated tools in your carpenters pouch. Make sure you share..It helps spread the word!! Thanks. Also, the martinez titanium square was the first he ever made, and I had to cover a spot for mark...wasn't trying to avoid showing off his tool. I love it
Been wondering for months why you had that tape on the square. Mystery solved! Great video, honestly never really understood how the hip-val/common scales worked on the square. First video I have seen that explains it in plain english so us poor HVAC techs can figure it out!
the fact that you own your own business your videos are produced at an above average level and you articulated the points well all contribute to the confidence that the information you provide is right so not matter how insignificant the subject matter might seem viewers will appreciate hearing it from a credible source ... thanks for doing what you do brother
Great video and spot on about contributing knowledge for future carpenters. This is your legacy along with your buildings. Your pride shows greatly in both.
I am 50 years old, and just started building and woodworking this year. I grew up in a single-parent home and was never taught any of this stuff. I took Woodshop in Highschool but that was 36 years ago. SO this doesn't just help your younger viewers, this helps old men like me. Thank you so much.
props to ya. im 16 years old and ive used tools like these for most of my life, but only for basic use. ive been doing my research to fully utilize the tools i use in my life. good luck!
@@TheMr.George what you said made literally no sense, zero context to what you were saying and now you can’t say anything else to correct that cus you already fucked up
You've made one comment on this channel and it was to call a guy a beta. You didn't make anything look stupid except yourself. Why are you here just to call a guy a beta?
This is a good book. Does provide a step by step introduction to how to build things ruclips.net/user/postUgkxhgbP-6hUnXu_QRaoHgLztgsI0YF3HqR0 , also does offer some steps. Includes pictures to give you ideas for layouts and such. If you are looking for a guide, this is not exactly what you want. But if you are trying to familiarize yourself with the way that pole barn building and other out buildings, are made, then this will work just as you need it to. A few things in this book are a barn (of course), detached garage, storage building, and coops.
This video was . I am was very helpful! I am a woman in my late 50's who has no woodworking skills and did not need those skills until now, bought a 26' foot trailer, gutted it completely, replaced one side of the trailers sub floor, put in new kitchen cabinets and now working on trim work. Thank you for your video couldn't do all this without help from people like you posting these amazing videos.
Great job Kyle! I’m a 71yo former Air Force carpenter and I didn’t know some of those. I especially like the saw guide reversal from the way I’ve been doing it for 50 years!
I’m so thankful for you takin the time to get back to the basics - it’s not just the kids, it’s also the 45yr old single mum who flips furniture and wants to start woodworking as well - never too old to learn . 👍
i have found that the square is more prone to wandering away from the wood when used that way, also you must keep a tighter grip on the square and work piece to keep it from moving.
Thank you for this. Been building for a long time but never knew all these tricks. Self taught for years, but people like you on RUclips has increased my knowledge more in the past two years than I could have ever imagined.
I’m a DIY person and have never had that simple explanation of a speedi square like that before. I watched it twice now and appreciate that knowledge Kyle. Thank you.
Keep teaching, your never to old to learn and anybody who thinks they know it all already are the very ones who need to be taught. I've been working construction 42 years and I'm still learning every day, especially with the new products and tools available. Enjoy your videos, keep up the good work.
5 лет назад+1
If i claim to be a wise man , it surely means that i dont know. -Kansas
I'm with Jon Wright, I never thought to turn the square so that there is more surface material to line up the circular saw with the square. What a great idea! Thanks. Great video. You are right, I am glad these videos will be around for those that are interested in using tools and using them correctly. I wish something like RUclips was around when I was a kid.
I’m a carpenter for 19 years , no judgement here , I’m always interested in learning new things, I mean I know pretty much what you done here but I also know what you’re doing , inspiring the new generation , great videos these tools day no matter what it is you’re doing 🤙🤙
Thank you for showing the kids how to use a speed square properly , ... I'm 67 yrs old , and use mine for 90's and 45 , and to guide my saw , ... now i see I wasn't even using it properly to guide my saw , + I learned a lot of useful information . Most people . automatically assume they know how to use it , and most tutorials , do too .. thanks.
Thank you for this comprehensive explanation of how to use a rafter square i am 67 years old and going to work on a garden project involving wood, saws etc and needed to know the useages of this kit..thank you from Ashby de la zouch England
You also helped this 37 year old mother of three who recently fell in love with woodwork and knows absolutely NOTHING about it. I appreciate this video, learned a whole lot and I am excited to start my first project!
Vanessa Benitez Do it! Get it Done. I built my own garage work bench (8x4) from simple internet plan under $60 using 3/4” plywood, 2 x 8’s, circular saw, tape measure, nails, pegboard, and plenty of elbow grease. 👊🏻 Bit of sanding and 2 coats of poly varnish. 5 years later it still looks good and most importantly, USED! 👍😁 Still get complimentary remarks on it, with the occasional “...YOU built that?!...” I hit Medicare age end of this year. Proud am I?! You betcha!!! 😌😀
I just recently started woodworking and my sweet brother in law bought this speed square for me. He gave me a run down on what it can do but said to watch videos. Your video was the best! Thank You
Thanks Kyle, I appreciate your time and effort to helping us learn how to make more use out of a basic tool. I'm 64 and a new DIYer woodworker. You showed me a few that I didn't know about. Thanks again for sharing your thoughts and videos, Rodney
I don't care how old you are you can still learn little tricks about every tool I learn more from what you said than I have on some other people talking about it just brings more information to me I'm 54 and I can use all the help I can get so keep up the great work you made me think it's nothing but at some of us think it's a lot you take care if everybody cheers with a beer
After years in many different trades, I knew these. But I just wanted to say, I thought #2 was just common sense. Now that I think of it, I have seen a lot of RUclipsrs bottom plant a speed square for a saw guide. Thanks for sharing the pull-don't-push in your list. Hopefully more people will learn this much easier method for a short saw guide.
I'm an 81-year-old, super-independent woman who has been taking are of her house for some 30 years now, and you've just saved me umpteen hours of frustration. Thank you so, so much!
I'm too hip to be square. Obligatory Huey Lewis and the News reference over, this was incredibly useful. I'm new to these types of tools and appreciate it. Thanks. 🙏🏻
Love your videos. I have one safety tip take your battery out or unplug saw whenever do anything with the blade. I try really hard to improve the safety or apprentices by changing my ways and that one was pointed out to me by one of them.
I appreciate the video. I just got my general and there were 2 tricks I've never used! Using as a cutting guide, ive worked on 2 framing crews, 1 in Alaska and 1 in Oregon and neither knew about that trick. Also sent this to my old boss who's been a general for 30 years and never knew how to use one. It blew his mind. Keep up the awesome videos! 😎
Great Vid & thanks. Been using a square for decades....but, if you search for a RUclips vid for how to use a square. Not that many new vids, that are fun, knowledgeable, & make it easy to understand for some ppl.....trust me, I’ve suggested some vids to ppl. Always love going back to basics! Will always have new generations; & some ppl enjoy learning from certain types of ppl....& you my friend, I can listen to you all day👍🏻 You make learning fun😁(think would make an awesome teacher, especially at University Level). Can always learn something new everyday....just gotta be open to it😉 Cheers✌🏼
A VERY good video for a rookie like me. I had only used the 90 or 45 degree function (your tip #1). You clearly taught me how to get MUCH more use out of my rafter square. Thanks!
I'd like to thank you for making this video. I'm 41 and it has been a few years since I last worked construction and this helped me remember a few of the things that I had forgotten since HS. Again THANKS!!!!
Great tips. Any measurement under 7 I'm using my square... A lot faster than tape. One thing this young veteran carpenter will add is how to quickly mark the pitch of a layon or porch roof. Example, 6/12 laying on a 10/12. Pivot square to 6, hold there and mark 10, then scribe from pivot point through mark. Saves lots of headache!
Keep up the awesome work. You are right about young people needing to learn how to do things the right .I'm 60 years old and been pounding nails for 40 .we need good carpenters to take over.keed up the learning videos and thank you for that.
Regarding your comments about who watches your channel; I am only a hobbyist and DIY doesn't extend much above simple home renovation, but religiously watch your channel. I like the way you produce content and have picked up a few tips that I can apply to much smaller projects. A post frame, hmmm, not something that I'd ever be in a position to build. Keep the good stuff coming 👍
Well done young man. 72 years of age, have never played with tools at any time of my life. I'm just about to make up for a small amount of that lost time. I'm inspired. Tomorrow, I'm off to the tool shop to purchase a speed square and a carpenters' pencil. There's a very good chance I'll purchase a circular saw too . . .😃
Your top 10 uses were great, very glad you decided to share. I have watched other content on using squares and yours was different. First you demonstrate what we need to know quickly and to the point. No excess dialog, unlike my comment:)! And even better the information provided on how to use a tool is qualified further by your on the job experience. I never thought of flipping the square base to the far side of the board when making a cut with the saw, but your insight on why you do it that way just makes so much sense. That's one tip, that this old brain won't forget! Regarding video material that may seem mundane to some, I would love to see practical measuring and marking tricks. For example, and I may be reading too much into what I saw, when you demonstrated how to make a 90 degree/perpendicular cut, you put a straight mark on the board as the desired measurement, but then added a check mark. The speed at which you did it told me this is just part of how you do things and I wondered why you added the second, clarifying mark. And how did that change where you placed the square if at all. I am not in the trades, just a DIY, but always looking to improve my measuring, marking and accurately cutting material, as I have yet to master. I measure, I mark, I confirm measure, but then find I have to sneak up once or twice on the cut because some how I am off. I have also heard in videos leave the line, take the line, split the line, but why did that person make that call after making the mark? I don't know if it is because I am a lefty, or just my aging eyes, but I find marking to be my biggest challenge on any project.
Having the speed square facing you while make a cut makes so much sense. And my mind is blown why I never thought about using it to cut circles. Thank you so much!!!
Im a long time carpenter have known how to use a speed square For a long time but these kind of videos are great refresher or a great beginners tool For learning
I actually got my start in woodworking through cabinet and furniture making. I went 12 years in the craft not knowing how certain features of the speed square could improve some of my tasks just because no one ever showed me. Finally I employed a rough carpenter and taught him fine finish work and then I got to learn from my employee how it could benefit me. There's a lot of basic Carpenters tools that hobbyists and even pros in other sub categories of carpentry don't understand. I think it's cause people rush to use the big table saw and chop saw and don't slow down to learn the small stuff. Even like what a Carpenters pencil is good for. Again, I didn't learn this till like 12 years into the trade.
Killer tips! The "double check your square is square one" is really on point. I don't do framing, but have used a square like this since I started building things. The square I had been using was not square and led to some major headaches come glue up.
Hi Kyle, I am 69 years old and have started doing my own maintenance work and the tips I get from watching your presentations is priceless . What a great help. Thank you so much.
This is a great video. There are a ton of people who only use a square for use number one and never know how to use any of the other marks or holes on the square.
Shame on you Kyle for not taking the battery out of the saw before messing with the blade. Just kidding. Safety third! You rock brother. Thanks for taking us through the fundamentals.
63 YO in the UK and I had never even seen one of these until recently, I find myself building a large dog kennel and was looking at this "new fangled" square and thought this might be too clever for me. However; I watched this, went away and made a perfect 15 degree pitched roof, so thank you for going back to basics and making it so easy to follow.
You are also helping ladies who want to learn! I didn't know what scribing was or how to use a square until you just showed me! Thank you so much! I'm 52 and my dream She Shed (WORKSHOP) is being built. I want to learn how to use power tools and the like :-) I have always been envious of those who could build, so darn it, I'm going to learn!!!! :-D
I'll give this video two thumbs up!! People are so eager to learn the tricks to the trade that they actually forget to learn the trade. Great video for basic carpentry skills with a square that everybody should know.
Your video's definitely don't just hit people in your trade but also those outside of it. I'm an accountant, I'll probably never do the things you do, but i can't stop watching your videos. After a long day with my head buried in spreadsheets, I find it relaxing to watch you do what you do, and do it accurately. This video was a good one, and may actually help me somewhere down the line.
I’m 37 years old and just started working with wood, making simple stuff like shelves and tables. This was tremendously helpful to me and I greatly appreciate the tips you provided in this video. This’ll help me out a ton as I work to improve my woodworking skills.
Very useful. This type of square just wasn't around decades ago. I took woodwork at school, and have been DIYing all my life, but only heard the term "speed square" for the first time yesterday. So the video is useful to older folks too.
Thanks for the info. I’m almost 50y/o and I learned a lot. I’m a “late learner”, I spent 20 years in the infantry and didn’t have much need for a square. You answered pretty much all of the questions about the meaning of the numbers on the inside of the square and the different ways to use it. I don’t plan on ever having to frame a house or build a roof but if I ever have to help someone at least I have a basic understanding of how to use the square. Thanks again.
I’m always amazed how well you output info verbally without unnecessary Chat in your videos. 👑 of instagram videos. Str8 to the point and serious about success. Glad I finally subscribed to your RUclips page. Keep up the good work. ICU
I’m 35 years old and I have no clue how to do any of this stuff. My dad would always try to teach me but I wasn’t interested. Please don’t stop making these videos.
I've been a Auto Body guy for years so working with wood is all new to me. In my quest to build my own work bench out of wood I bought my first rafter square last night & I had no idea what all them notches were for. This is a great video I learned a lot thanks for sharing this with the world 🤙
Thank you for tip number 2. Never thought of using the square backwards when cutting. You just made me More effective. You are awesome Kyle. /Björn ,sweden
I just started working with wood, you just saved me from a whole lot of headaches. Up to this point it's all been trial and error at this point. Thanks for posting.
Man, Great Video! I'm NOT a builder, but a jack of all. I use the Square all the time, and nobody explained in detail how to really use it...UNTIL NOW!!!! Awesome, Thanks Bro!
Thank you. I am a weekend builder. I didn't know that there were so many uses for a speed square. Please keep putting out more educational videos for us that don't know the basics in construction.
Love the educational videos! Even a twenty year union carpenter can still be taught a new tip or trick along the way! I know you’re a busy man but I’m still waiting for your review on the sala harness I recommend you to pick up...
Hey everyone, hope this helps someone in learning one of the most under appreciated tools in your carpenters pouch. Make sure you share..It helps spread the word!! Thanks. Also, the martinez titanium square was the first he ever made, and I had to cover a spot for mark...wasn't trying to avoid showing off his tool. I love it
Been wondering for months why you had that tape on the square. Mystery solved!
Great video, honestly never really understood how the hip-val/common scales worked on the square. First video I have seen that explains it in plain english so us poor HVAC techs can figure it out!
the fact that you own your own business your videos are produced at an above average level and you articulated the points well all contribute to the confidence that the information you provide is right so not matter how insignificant the subject matter might seem viewers will appreciate hearing it from a credible source ... thanks for doing what you do brother
Which one of your square do you like most or do you recommand for someone who need to get a new one?
Great video and spot on about contributing knowledge for future carpenters. This is your legacy along with your buildings. Your pride shows greatly in both.
@@TheMixmastamike1000 ^^^ THIS ^^^ Well said bud.
I am 50 years old, and just started building and woodworking this year. I grew up in a single-parent home and was never taught any of this stuff. I took Woodshop in Highschool but that was 36 years ago. SO this doesn't just help your younger viewers, this helps old men like me. Thank you so much.
props to ya. im 16 years old and ive used tools like these for most of my life, but only for basic use. ive been doing my research to fully utilize the tools i use in my life. good luck!
Beta 🥱🥱🥱
@@mountaindewisdisgusting3779 why you here then? 🍤
@@TheMr.George what you said made literally no sense, zero context to what you were saying and now you can’t say anything else to correct that cus you already fucked up
You've made one comment on this channel and it was to call a guy a beta. You didn't make anything look stupid except yourself. Why are you here just to call a guy a beta?
Hey man. Im 40. Been a carpenter for 20 years. Ain’t nobody teach me nothing. Thank u. That video is saved.
69 yr old man here. Cut lotta boards. I DID learn something from you today. Thanks so much for making a video about the basics.
you still working?
@@CabezaDePistacho - No. Retired guy. Living the dream.
Been around for 64 years, and you taught me a thing or two. You are never too old to learn. You just have to be humble and admit it. Thank you.
Amen,we'll said.
This is a good book. Does provide a step by step introduction to how to build things ruclips.net/user/postUgkxhgbP-6hUnXu_QRaoHgLztgsI0YF3HqR0 , also does offer some steps. Includes pictures to give you ideas for layouts and such. If you are looking for a guide, this is not exactly what you want. But if you are trying to familiarize yourself with the way that pole barn building and other out buildings, are made, then this will work just as you need it to. A few things in this book are a barn (of course), detached garage, storage building, and coops.
This video was . I am was very helpful! I am a woman in my late 50's who has no woodworking skills and did not need those skills until now, bought a 26' foot trailer, gutted it completely, replaced one side of the trailers sub floor, put in new kitchen cabinets and now working on trim work. Thank you for your video couldn't do all this without help from people like you posting these amazing videos.
Great job Kyle! I’m a 71yo former Air Force carpenter and I didn’t know some of those. I especially like the saw guide reversal from the way I’ve been doing it for 50 years!
thanks for the feedback and your service!!
There is always someone who doesn't know or can learn something new. Thanks for the video.
I’m so thankful for you takin the time to get back to the basics - it’s not just the kids, it’s also the 45yr old single mum who flips furniture and wants to start woodworking as well - never too old to learn . 👍
I like your reasoning for having the speed square face towards you when cutting a board. I will start doing that.
i have found that the square is more prone to wandering away from the wood when used that way, also you must keep a tighter grip on the square and work piece to keep it from moving.
Framing square is a different thing and not discussed in this video.
I cut this way because the saw motor catches on my empire lip so i decided to just flip it and hold tighter
@@benningtoncamper2852 nah, I clamp mine
alejandro espino same especially if you have the saw depth all the way down
Thank you for this. Been building for a long time but never knew all these tricks. Self taught for years, but people like you on RUclips has increased my knowledge more in the past two years than I could have ever imagined.
thanks adam that is great to hear
I’m a DIY person and have never had that simple explanation of a speedi square like that before. I watched it twice now and appreciate that knowledge Kyle. Thank you.
that's awesome to hear Steve thanks
Keep teaching, your never to old to learn and anybody who thinks they know it all already are the very ones who need to be taught. I've been working construction 42 years and I'm still learning every day, especially with the new products and tools available. Enjoy your videos, keep up the good work.
If i claim to be a wise man , it surely means that i dont know. -Kansas
@ Sawdust in the Wind!
Yes sir! The man knows his tunes
As a novice ...... I always appreciate the review of the basics of any tool, especially something as important as a square ....
I'm with Jon Wright, I never thought to turn the square so that there is more surface material to line up the circular saw with the square. What a great idea! Thanks. Great video. You are right, I am glad these videos will be around for those that are interested in using tools and using them correctly. I wish something like RUclips was around when I was a kid.
I’m a carpenter for 19 years , no judgement here , I’m always interested in learning new things, I mean I know pretty much what you done here but I also know what you’re doing , inspiring the new generation , great videos these tools day no matter what it is you’re doing 🤙🤙
Thanks buddy appreciate the continued support
RR Buildings also these toolsday episodes, the start of it reminds me of like a tv show haha , I reckon that’s where you’ll end up, hosting a tv show
@@wilkinsoncarpentry6278 RUclips pays better bro it's a new age haha
26,000 people so far are happy you made this video, no need to justify it to us. we're here for a reason. thanks for making the video.
Always share what you know. You might even teach a 53 year old like myself some new tricks. Good on you for making this video for the little guy.
Thanks glad it helped
New wood worker here. I bought one on sale, and now I know how to use it. Thanks.
Thank you for showing the kids how to use a speed square properly , ... I'm 67 yrs old , and use mine for 90's and 45 , and to guide my saw , ... now i see I wasn't even using it properly to guide my saw , + I learned a lot of useful information . Most people . automatically assume they know how to use it , and most tutorials , do too .. thanks.
Absolute GOLD … newbie to speed squares and blown away with the quick and easy functionality it offers … Thanks a million 🙏
Thanks from this 60-year-old dyslexic landscape contractor it has been wanting to learn the full potential of this great little tool. God’s best
Thank you for this comprehensive explanation of how to use a rafter square i am 67 years old and going to work on a garden project involving wood, saws etc and needed to know the useages of this kit..thank you from Ashby de la zouch England
You also helped this 37 year old mother of three who recently fell in love with woodwork and knows absolutely NOTHING about it. I appreciate this video, learned a whole lot and I am excited to start my first project!
Awesome good luck!!
Vanessa Benitez Do it! Get it Done. I built my own garage work bench (8x4) from simple internet plan under $60 using 3/4” plywood, 2 x 8’s, circular saw, tape measure, nails, pegboard, and plenty of elbow grease. 👊🏻 Bit of sanding and 2 coats of poly varnish. 5 years later it still looks good and most importantly, USED! 👍😁 Still get complimentary remarks on it, with the occasional “...YOU built that?!...” I hit Medicare age end of this year. Proud am I?! You betcha!!! 😌😀
At 36 this video taught me a lot! I just started trying my hand at woodworking and sign making and this was a huge help….definitely appreciated it!🤘🏼
Great video Kyle... You can also, scrape frost off vehicle windows, use as a spacer for decking, and open beer bottles..
decking spacer is good
I just recently started woodworking and my sweet brother in law bought this speed square for me. He gave me a run down on what it can do but said to watch videos. Your video was the best! Thank You
The right thing to talk about at the right time.You would be amazed how interesting the fundamentals are.Good job.
Only in few minutes I realized the necessity of this tool. Bravo❤❤🇬🇷
Thanks Kyle, I appreciate your time and effort to helping us learn how to make more use out of a basic tool. I'm 64 and a new DIYer woodworker. You showed me a few that I didn't know about. Thanks again for sharing your thoughts and videos, Rodney
definetely the most versatile tool i always bring with me. Carpenter square is my favorite tool
60 yrs old, just started using one of these a few years ago and knew none of this! always learning, thank you so much!
You tube and guys like him Rock!!
People of all ages take up new hobbies and trades. I’m 55 yrs old, that video on squares was exactly what I needed.
I don't care how old you are you can still learn little tricks about every tool I learn more from what you said than I have on some other people talking about it just brings more information to me I'm 54 and I can use all the help I can get so keep up the great work you made me think it's nothing but at some of us think it's a lot you take care if everybody cheers with a beer
Can you please give me the make of the speed square with the level
Thank you
I'm here getting that knowledge over 3 years after you posted this video. Thanks for sharing.
After years in many different trades, I knew these. But I just wanted to say, I thought #2 was just common sense. Now that I think of it, I have seen a lot of RUclipsrs bottom plant a speed square for a saw guide. Thanks for sharing the pull-don't-push in your list. Hopefully more people will learn this much easier method for a short saw guide.
I cannot figure out which is more fascinating...the invention or you, sir.
Thank you kindly for sharing your knowledge!
I'm 21 and know nothing when it comes to woodworking so this was pretty informative thanks
Everything is informative when you know nothing
I'm an 81-year-old, super-independent woman who has been taking are of her house for some 30 years now, and you've just saved me umpteen hours of frustration. Thank you so, so much!
I'm too hip to be square. Obligatory Huey Lewis and the News reference over, this was incredibly useful. I'm new to these types of tools and appreciate it. Thanks. 🙏🏻
Hey man I’m 48 and just learning how to work with wood, I just learned a ton from this video! Thank you!
Love your videos. I have one safety tip take your battery out or unplug saw whenever do anything with the blade. I try really hard to improve the safety or apprentices by changing my ways and that one was pointed out to me by one of them.
54 yo woman and I’ve just gained a whole lot of handy tips - thank you
I appreciate the video. I just got my general and there were 2 tricks I've never used! Using as a cutting guide, ive worked on 2 framing crews, 1 in Alaska and 1 in Oregon and neither knew about that trick. Also sent this to my old boss who's been a general for 30 years and never knew how to use one. It blew his mind. Keep up the awesome videos! 😎
Man, Ian has to be one cool kid. He'll be a fine leader one day; definitely ahead of the curve.
Great Vid & thanks. Been using a square for decades....but, if you search for a RUclips vid for how to use a square. Not that many new vids, that are fun, knowledgeable, & make it easy to understand for some ppl.....trust me, I’ve suggested some vids to ppl. Always love going back to basics! Will always have new generations; & some ppl enjoy learning from certain types of ppl....& you my friend, I can listen to you all day👍🏻 You make learning fun😁(think would make an awesome teacher, especially at University Level).
Can always learn something new everyday....just gotta be open to it😉
Cheers✌🏼
Thanks brother appreciate that
Who knew a simple speed square could be so versatile? I've had one since 1978 and never knew it could do so much. Great video!
Glad it helped Howard
A VERY good video for a rookie like me. I had only used the 90 or 45 degree function (your tip #1). You clearly taught me how to get MUCH more use out of my rafter square. Thanks!
Awesome glad to hear that
I'd like to thank you for making this video. I'm 41 and it has been a few years since I last worked construction and this helped me remember a few of the things that I had forgotten since HS. Again THANKS!!!!
Great tips. Any measurement under 7 I'm using my square... A lot faster than tape. One thing this young veteran carpenter will add is how to quickly mark the pitch of a layon or porch roof. Example, 6/12 laying on a 10/12. Pivot square to 6, hold there and mark 10, then scribe from pivot point through mark. Saves lots of headache!
Interesting I like
It
i always do that, i am a framer by the way 🤙
Keep up the awesome work. You are right about young people needing to learn how to do things the right .I'm 60 years old and been pounding nails for 40 .we need good carpenters to take over.keed up the learning videos and thank you for that.
Regarding your comments about who watches your channel; I am only a hobbyist and DIY doesn't extend much above simple home renovation, but religiously watch your channel. I like the way you produce content and have picked up a few tips that I can apply to much smaller projects. A post frame, hmmm, not something that I'd ever be in a position to build. Keep the good stuff coming 👍
Well done young man. 72 years of age, have never played with tools at any time of my life. I'm just about to make up for a small amount of that lost time.
I'm inspired. Tomorrow, I'm off to the tool shop to purchase a speed square and a carpenters' pencil. There's a very good chance I'll purchase a circular saw too . . .😃
Your top 10 uses were great, very glad you decided to share. I have watched other content on using squares and yours was different. First you demonstrate what we need to know quickly and to the point. No excess dialog, unlike my comment:)! And even better the information provided on how to use a tool is qualified further by your on the job experience. I never thought of flipping the square base to the far side of the board when making a cut with the saw, but your insight on why you do it that way just makes so much sense. That's one tip, that this old brain won't forget!
Regarding video material that may seem mundane to some, I would love to see practical measuring and marking tricks. For example, and I may be reading too much into what I saw, when you demonstrated how to make a 90 degree/perpendicular cut, you put a straight mark on the board as the desired measurement, but then added a check mark. The speed at which you did it told me this is just part of how you do things and I wondered why you added the second, clarifying mark. And how did that change where you placed the square if at all. I am not in the trades, just a DIY, but always looking to improve my measuring, marking and accurately cutting material, as I have yet to master. I measure, I mark, I confirm measure, but then find I have to sneak up once or twice on the cut because some how I am off. I have also heard in videos leave the line, take the line, split the line, but why did that person make that call after making the mark? I don't know if it is because I am a lefty, or just my aging eyes, but I find marking to be my biggest challenge on any project.
Interesting... things I take for granted at this point but maybe I Great video to help someone
x2
Having the speed square facing you while make a cut makes so much sense. And my mind is blown why I never thought about using it to cut circles. Thank you so much!!!
Thank you for the great video.
Thank you for using different squares. Nice to see different choices and features.
that was my point...I will use the martinez everyday, but at $250 most won;t
Im a long time carpenter have known how to use a speed square For a long time but these kind of videos are great refresher or a great beginners tool For learning
I actually got my start in woodworking through cabinet and furniture making. I went 12 years in the craft not knowing how certain features of the speed square could improve some of my tasks just because no one ever showed me. Finally I employed a rough carpenter and taught him fine finish work and then I got to learn from my employee how it could benefit me.
There's a lot of basic Carpenters tools that hobbyists and even pros in other sub categories of carpentry don't understand. I think it's cause people rush to use the big table saw and chop saw and don't slow down to learn the small stuff. Even like what a Carpenters pencil is good for. Again, I didn't learn this till like 12 years into the trade.
You covered many excellent points.
I'm 21, already been a carpenter for 7 years but I learned a lot from this video!! Wow
Killer tips! The "double check your square is square one" is really on point. I don't do framing, but have used a square like this since I started building things. The square I had been using was not square and led to some major headaches come glue up.
I bought a drywall T-square once that was about 1/2 degree out. What a pain. I finally wrapped it around a telepost.
@@gordonwaldner9792 tapping w/hammer on drywall squares to square them is normal
Thanks. I just retired and now have more time to do woodwork. This was great as youtube is my training manual. Cheers
Hi Kyle, I am 69 years old and have started doing my own maintenance work and the tips I get from watching your presentations is priceless . What a great help. Thank you so much.
This is a great video. There are a ton of people who only use a square for use number one and never know how to use any of the other marks or holes on the square.
Shame on you Kyle for not taking the battery out of the saw before messing with the blade. Just kidding. Safety third! You rock brother. Thanks for taking us through the fundamentals.
63 YO in the UK and I had never even seen one of these until recently, I find myself building a large dog kennel and was looking at this "new fangled" square and thought this might be too clever for me.
However; I watched this, went away and made a perfect 15 degree pitched roof, so thank you for going back to basics and making it so easy to follow.
Good stuff I'm a framer 2 for 6 years one thing I like my speed square is sit cuts. You use it when one roof sits on another roof
You are also helping ladies who want to learn! I didn't know what scribing was or how to use a square until you just showed me! Thank you so much! I'm 52 and my dream She Shed (WORKSHOP) is being built. I want to learn how to use power tools and the like :-) I have always been envious of those who could build, so darn it, I'm going to learn!!!! :-D
I wish I could take a basic carpentry class, such a beautiful skill to have.
I'll give this video two thumbs up!! People are so eager to learn the tricks to the trade that they actually forget to learn the trade. Great video for basic carpentry skills with a square that everybody should know.
Brilliant tips. Loved number 9 and 10.
Super simple. Thanks for sharing.
Your video's definitely don't just hit people in your trade but also those outside of it. I'm an accountant, I'll probably never do the things you do, but i can't stop watching your videos. After a long day with my head buried in spreadsheets, I find it relaxing to watch you do what you do, and do it accurately. This video was a good one, and may actually help me somewhere down the line.
Thanks man.
YOU LEARN SOMETHING NEW EVERY DAY. THANK YOU
As a Tenure Welder Fabricator perspective... now I know the optimal uses of Rafter -aka- speed square! Thanks so much.
I don’t ever comment on videos but this one is brilliant and very informative
I’m 37 years old and just started working with wood, making simple stuff like shelves and tables. This was tremendously helpful to me and I greatly appreciate the tips you provided in this video. This’ll help me out a ton as I work to improve my woodworking skills.
Your instruction videos are excellent. I loved the one about your bathroom remodel.
Very useful. This type of square just wasn't around decades ago. I took woodwork at school, and have been DIYing all my life, but only heard the term "speed square" for the first time yesterday. So the video is useful to older folks too.
It was invented in 1925. You must be venerable if it wasnt available when you went to school
PS do you have a tip to convince my wife and daughter that it is a square not a triangle?! Lol
haha let me know when you figure it out
Ha however calling it by its real name is gonna mess up my kid in preschool because she only knows it as a square.
Square refers to its purpose, not is shape. Just like an engineers square is called a square not an "L"
@@adamliske yea.... umm ya missed the joke
Oh I'm using that one
Thanks for the info. I’m almost 50y/o and I learned a lot. I’m a “late learner”, I spent 20 years in the infantry and didn’t have much need for a square. You answered pretty much all of the questions about the meaning of the numbers on the inside of the square and the different ways to use it. I don’t plan on ever having to frame a house or build a roof but if I ever have to help someone at least I have a basic understanding of how to use the square. Thanks again.
Thanks for your service Scott!!
RR Buildings thank you for your support. 🙂🙂🙂
I’m always amazed how well you output info verbally without unnecessary Chat in your videos. 👑 of instagram videos. Str8 to the point and serious about success. Glad I finally subscribed to your RUclips page. Keep up the good work. ICU
I’m 35 years old and I have no clue how to do any of this stuff. My dad would always try to teach me but I wasn’t interested. Please don’t stop making these videos.
I've been a Auto Body guy for years so working with wood is all new to me. In my quest to build my own work bench out of wood I bought my first rafter square last night & I had no idea what all them notches were for. This is a great video I learned a lot thanks for sharing this with the world 🤙
Thank you for this. 30 years old and just starting with woodworking and this is very helpful.
I didn't know half of that, thank you for teaching us!
Went from being a pipe welder to a carpenter and so this was super helpful. Thanks man.
Great video Kyle! Your tips are incredibly interesting even when keeping it simple
You've helped me a great deal to understand how to use a speed square properly, thank you.
My friend this is very important to know when in construction great job thumbs up my friend
You explained and demonstrated the tips an an easy to understand format. Great Job!!!! I wished a lot more people were able to emulate your style.
Thank you for tip number 2. Never thought of using the square backwards when cutting. You just made me More effective. You are awesome Kyle. /Björn ,sweden
Perhaps you were using the square backwards, he showed you forward way.
Thanks for making this video, I’m a beginner and I learn a lot
Been doing this for almost 12 years, i love your #2 idea. Awesome how you can always learn something no matter what
Man! this is amazing!
I've always wanted to know the details about "speed-squares".
I'm glad I found your video.
Cheers!
I just started working with wood, you just saved me from a whole lot of headaches. Up to this point it's all been trial and error at this point. Thanks for posting.
Hell man, I learned a few things. And I’m an old fart! Never too old school to learn!!! 👍👍👍😎🇨🇱 Thanks
Rico bueno... quietae viejo
thank u learned som thing today (DAVID)
Every time I think I know it all I find out I don't.
Every time I think I seen it all I find out I haven't
Man, Great Video! I'm NOT a builder, but a jack of all. I use the Square all the time, and nobody explained in detail how to really use it...UNTIL NOW!!!! Awesome, Thanks Bro!
TIL that I only use my speed square for marking 90s. Thanks for the additional tips!
Thank you. I am a weekend builder. I didn't know that there were so many uses for a speed square. Please keep putting out more educational videos for us that don't know the basics in construction.
Love the educational videos! Even a twenty year union carpenter can still be taught a new tip or trick along the way! I know you’re a busy man but I’m still waiting for your review on the sala harness I recommend you to pick up...
yes sir brother
I've had my square for 5 plus years. Boy did I need this video.