Analog Input scaling in Delta PLC

Scaling analog input signals in a Delta PLC involves mapping the raw analog input values from sensors or other devices into meaningful engineering units. This process is essential for interpreting the data correctly within your control system. Here are the general steps to scale analog input signals in a Delta PLC
00:00 intro
01:10 Analog Input in Delta PLC
04:37 Floating Point value
07:06 Analog Scaling
Define scaling constants or variables to map the raw analog input values to engineering units. You typically need to use linear scaling, represented by the equation.
PID WITH ANALOG I/O
• Analog Input scaling i...
#ScaledValue = (RawValue - RawMin) * (EngMax - EngMin) / (RawMax - RawMin) + EngMin
Where:
#ScaledValue is the scaled/converted value in engineering units.
#RawValue is the raw analog input value.
#RawMin and #RawMax are the minimum and maximum values of the raw input signal.
#EngMin and #EngMax are the minimum and maximum values in engineering units.
Analog Input scaling in Delta PLC, Delta PLC Analog Input,Analog Saclling,DVP 12 SE,#delta plc,#analog Input Scaling,PLC Input scaling,plc input,Analog Input,#delta plc analog input, #delta plc analog INPUT scaling, #analog_input_scaling, #analog_input_scaling_0_10volt
Disclaimer:
All the software interfaces shown in the video are for educational purposes only, & this are downloaded by the ENTERNET search. The look can vary/differ based on change in version but the process/ procedure/ steps more or less remain the same.
#INDUSTRIAL_AUTOMATION
#ElectroSoftAutomata
#automation_and_bms
Note:
In case of any doubt, kindly drop a comment so that I can reach you to solve your issues.
Also, comment your interested topics which you feel I should make video on.

[@Pramod__bhardwaj__8287]

Good👍👍

[@ydmaker5405]

PLEASE MAKE VIDEO ON 4-20MA ANALOG SCALING