Salam, Est ce qu’il serait possible d’avoir les Pin out de ton branchement de ton UCH T4. Afin de pouvoir fabriquer la même chose. Je te remercie par avance.
Hi Brother, My vehicle is Megane 4 1.5 dci 2016 Model Sedan. "Check Auto High Beam" signal appeared on my vehicle. With the ELM 327 Wi-fi device, I read and deleted the DTC fault codes with the car scanner application while the vehicle's engine was running, but these 3 DTC fault codes were not deleted; Dashboard/Instrument Cluster (11 bit) U0182(87) Data bus lamps control module, front - no communication, BCM (11 bit) B15D8(87) and B1568(04) and "Check Auto High Beam" signal still appear on the screen. Do I need to clear the DTC signals with the ignition on and the engine off? What do you think is the fault) Is the UCH faulty? Does the UCH need to be reprogrammed? When it gets dark, the automatic dipped beams are activated, but the light sensor seems to be intact, but the automatic high-to-dipped beam function no longer works. This signal appeared when the vehicle's 12 V battery was close to exhaustion, I measured the battery and read 12.20 Volts with the engine off. I bought a new battery and changed it. But the signal was not deleted. 3 years ago, the car's radio sound was close to dead, and the windows could not be opened and closed, then when the battery was changed, these problems were normal, but now they still continue. The high beams work, the low beams work, they are solid, but there is no transition from high to low to high. It is outputting a fault signal. I'll be glad, if you help me. Take care
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
👍👍👍👍
ممكن شيما ديال هاديك الماكيت ليمصايب
Salam,
Est ce qu’il serait possible d’avoir les Pin out de ton branchement de ton UCH T4.
Afin de pouvoir fabriquer la même chose.
Je te remercie par avance.
Hola . Te consulto con que programador puedo clonar la uch
Gracias
بارك الله فيك خويا أكرم
إلى كان ممكن شيما ديال هاديك الماكيت ليمصايب 🤝🤝🇲🇦🇲🇦🇲🇦🇲🇦
Hi Brother, My vehicle is Megane 4 1.5 dci 2016 Model Sedan. "Check Auto High Beam" signal appeared on my vehicle. With the ELM 327 Wi-fi device, I read and deleted the DTC fault codes with the car scanner application while the vehicle's engine was running, but these 3 DTC fault codes were not deleted; Dashboard/Instrument Cluster (11 bit) U0182(87) Data bus lamps control module, front - no communication, BCM (11 bit) B15D8(87) and B1568(04) and "Check Auto High Beam" signal still appear on the screen. Do I need to clear the DTC signals with the ignition on and the engine off? What do you think is the fault) Is the UCH faulty? Does the UCH need to be reprogrammed? When it gets dark, the automatic dipped beams are activated, but the light sensor seems to be intact, but the automatic high-to-dipped beam function no longer works. This signal appeared when the vehicle's 12 V battery was close to exhaustion, I measured the battery and read 12.20 Volts with the engine off. I bought a new battery and changed it. But the signal was not deleted. 3 years ago, the car's radio sound was close to dead, and the windows could not be opened and closed, then when the battery was changed, these problems were normal, but now they still continue. The high beams work, the low beams work, they are solid, but there is no transition from high to low to high. It is outputting a fault signal. I'll be glad, if you help me. Take care
Bonjour,
Svp, est-ce que vous pouvez montrer le schéma électrique du branchement de la BCM (T4) avec la bague anti démarrage.
Merci beaucoup
Contact me on 0662 888 587
@@AkramTechTV Akram shèma svp
Laguna 2 uch eşleşmiyor. Renolink kullanıyorum. Nasıl çözerim?
بارك الله فيك...ممكن schéma de branchement svp
Salam khoya tbarkallah 3lik ila momkin shima
Pinout Allah ihfdak
como puedo conseguir ese equipo????
الله هم بريك لكن ممكن شيما
Ciao hai lo schema di collegamento dei vari connettori?
Hola bro me puedes regalar el diagrama de la antena gracias
Slm khoya momkin shima lah ykabar bik
je besoin shéma alimenation bench sltp