Hola India, Wao Felicitaciones X Tu Contenido. Finalmente Alguien Hace Un Vídeo Sobre Este Desconocido Tema De Como Hacerlo. Eres La Única Que Lo Ha Hecho, Porque Hasta Pregunté Algunos Gurus De Como Conectarlos y Me Dijieron Que Eso No Se Podía Hacer. Bravo Por Tu Contenido De Inmenso Valor. Tu Sabes Lo Que Haces y Escuchas Las Necesidades De Tu Audiencia. Blessings.
Thank you for that informative video. I would like to add one problem-topic. I didn't get the system running, because I couldn't set the DJI mic to stereo. Then I had an idea and that really caused the problem. I had mounted the lightning adapter to use the mic with my iPhone. But as long as the lightning connector is mounted, it's not possible to set the reciver to stereo. So unplugging the lightning connector was the solution :-)
I used the splitter to connect my DJI mics. Thanks! How can I connect my Zoom H6 audio recorder to my Rodecaster Pro 2? I want to add it to a track so I can add more mics/guests on my podcast.
I haven’t tried this setup, so I have limited knowledge but babe you tried using the the rode connect app? That should recognize the mics and let you control the gain and other features. Let know if that works.
Monitoring this with a headphone is almost impossible while the mic is clipped into your shirt. Full of echo/phasing , I believe this is a general issue when the transmitter is not far away. You don’t need to monitor yourself on the run usually, but with this hack, you really need to.
Do you mean the camera that I use as my main camera? Or the one you see in this video? I use a teleprompter for my main camera. And a Sirui tripod to hold it up. And I actually have my key light mounted on the ceiling with one of these amzn.to/3IkTVKG
This is an extremely useful and informative video, thank you so much!
I'm glad you tested this, I had this idea after I recently received my RCP2 and figured this would work. Its nice to see someone has already done it!
Hola India, Wao Felicitaciones X Tu Contenido. Finalmente Alguien Hace Un Vídeo Sobre Este Desconocido Tema De Como Hacerlo.
Eres La Única Que Lo Ha Hecho, Porque Hasta Pregunté Algunos Gurus De Como Conectarlos y Me Dijieron Que Eso No Se Podía Hacer.
Bravo Por Tu Contenido De Inmenso Valor.
Tu Sabes Lo Que Haces y Escuchas Las Necesidades De Tu Audiencia.
Blessings.
❤️🙏🏽🙏🏽 muchísimas gracias!!
Beautiful quality of your videos. Congrats
Thank you for that informative video. I would like to add one problem-topic. I didn't get the system running, because I couldn't set the DJI mic to stereo. Then I had an idea and that really caused the problem. I had mounted the lightning adapter to use the mic with my iPhone. But as long as the lightning connector is mounted, it's not possible to set the reciver to stereo.
So unplugging the lightning connector was the solution :-)
Thank you a lot, for this video! Now a know, what I need to buy :)
(Stereo Cable 3.5mm TRS to Dual 6.35mm 1/4 TS Mono Y Splitter)
Thank you so so much for this.
Anytime! Thank YOU so much for watching!
Thanks so much for this! Dope tutorial! 😊✨🍃
Great video! Appreciate the help!!
Great video!
Great job
Hey, awesome video!
I wanted to know if you think it would be possible to connect the Dji Mic 2 to the Rode X Stream X
Thanks so much! :) so clear
I used the splitter to connect my DJI mics. Thanks! How can I connect my Zoom H6 audio recorder to my Rodecaster Pro 2? I want to add it to a track so I can add more mics/guests on my podcast.
Hi there great video! Great to meet a creator at the same size as my channel! Can this be done with the first rodecaster pro?
What is the best way to run 4 Rode wireless II without rode mixer. I have them through loopback now via the uSB.
I haven’t tried this setup, so I have limited knowledge but babe you tried using the the rode connect app? That should recognize the mics and let you control the gain and other features. Let know if that works.
Which lav mic are you using and also i would like to know how you connected the dji receiver to the rodecaster. Thank you.
Thanks for this video. I need help. I’m getting a little bit of a echo. I’m not sure how to stop it. Please help.
I have a 1/4 inch adapter for my headphones. Would it work with the mic?
Monitoring this with a headphone is almost impossible while the mic is clipped into your shirt. Full of echo/phasing , I believe this is a general issue when the transmitter is not far away. You don’t need to monitor yourself on the run usually, but with this hack, you really need to.
btw, which gain level do you usually set in the Dji receiver + transmitter when connecting the ti RCP2 ? .. I use 7 for both TX and RX.
Please can you tell me what type of stand that is that holds your light and camera?
Do you mean the camera that I use as my main camera? Or the one you see in this video?
I use a teleprompter for my main camera. And a Sirui tripod to hold it up. And I actually have my key light mounted on the ceiling with one of these
amzn.to/3IkTVKG
Does anyone know if it works with rode caster duo we want to connect 2 podcast mic and 1 wireless
Can you try connecting DJI Wireless Mic 2 to rodacaster pro 2?
I’ll give it a try today and report back!
Is the audio in real time or a delay with these wireless mics?
I have a delay set in Ecamm Live to 4frames because the camera is going through a camlink and thats what usually works best with Sony cameras.
no way ...
This is an obvious simple solution. This video is greeat for people who can't figure out things on there own.