What a great trick with heat gun and faded black plastics! I'm after a little surgery, can't go to my garage and work on my Yamaha FZ6 (some little after/pre season typical jobs) so i found your channel and it helps me get through the boring recovery time :D All the best and greetings from Poland!
Hey there Garreth, some positive feedback in hope you can do better: can you please install bearings that mount on the outside ring, without tapping on the inside ring, at 04:22 i see how you're damaging the bearing this way. Also a chain needs to be oiled from the inside out, not the otherway around. Slight detail but important. Good luck
Great work Garreth! Looks so much better & looks tough, sounds insane & you’ll have the SA cops after you😂😂😉😎🤟 Seriously, great work bro, you give so much passion to these bikes every time. Bringing them back to life & putting on your signature! Keep it up?💯
You went this far but the throttle tube looked broken at the end! Again love the detail and shots...Do you give a price break down and how much you got the crashed bike for?
Couldnt find a new throttle tube. Hard to find parts for this bike. But the throttle tube it has still works and this build is being dragged too long needs to be finished. Unfortunately I do not break down how much everything costs.
nice wheels... i have a little question plz...i changed the flywheel of my fz8 (2011) the magnets shattred inside...i put a new one and after some rides, it did shattred again....can the bearing be the problem?
How about Garreth, greetings from Mexico, I am a big fan of your work, I really like the restoration you do to the motorcycles, I would like to know where you buy the spare parts for the zx6r, I have one like it and it needs a lot of maintenance.
Your videos and builds are great. Entertaining and educational.
Glad you enjoy them
What a great trick with heat gun and faded black plastics!
I'm after a little surgery, can't go to my garage and work on my Yamaha FZ6 (some little after/pre
season typical jobs) so i found your channel and it helps me get through the boring recovery time :D
All the best and greetings from Poland!
Glad you enjoy it.!! Hope you can learn more tricks 😉
Those fairings are badass looking! Good choice!
Glad you like them!
7:10 nice diy👍❤️
Hey there Garreth, some positive feedback in hope you can do better: can you please install bearings that mount on the outside ring, without tapping on the inside ring, at 04:22 i see how you're damaging the bearing this way.
Also a chain needs to be oiled from the inside out, not the otherway around. Slight detail but important. Good luck
I can’t wait 😊 to see this beast coming up so well and quickly.Collins always glued to watching ur channel man 👨...Excellent job
Appreciate it!!
JUST IN TIME BRO!!
No problem
very good from Egypt 🇪🇬
scrap the bridgestone logo and change to michellin...hahaha....looking good bro the bike!
That heat gun hack is really cool tho
Yeah it really does alot.
Put a healtech quickshifter
Its easy to install and great to adjust on smatphone
Sweet build . Love the wheels . Check the front brakediscs . I think you mounted the left wrong . Correct me if i am wrong . Keep up the good work
Not mounted wrong bought them that way. Guess they are made that way 🤔
Thank you brother ❤️❤️
Dude i am so pumped to see this bike revived. Almost. Lol but its well on its way😂✌
New Video next Thursday 👌👌
Coming along great - can't wait to see it finished - thank you for sharing!
No problem new video on thursday
Awesome build man.
Thanks dude
beautiful and excellent work brother, I love the way you give life to motorcycles🥰
Glad you enjoy the videos
It looks awesome, can't wait for look it finished
Thanks bro 👌👌 new video next week
Projeto excelente!!! Parabéns pela técnica e qualidade do serviço.
Obrigado por compartilhar esses projetos, melhor que ver um filme 😂. ✊🏍️💨
Love the bike, and also the hair 😎
Glad you like it!
Great work Garreth! Looks so much better & looks tough, sounds insane & you’ll have the SA cops after you😂😂😉😎🤟 Seriously, great work bro, you give so much passion to these bikes every time. Bringing them back to life & putting on your signature! Keep it up?💯
Thanks man!! Cops dont even try 🤣🤣😂😂 but alot of builds to come
Keep up the good work buddy cheers!
Thanks, will do!
Maaaan the fairings looking insane 👌👌👌👌🎶
Cant wait for thr next vid! Support from the Philippines 🇵🇭
THUMBS UP GREAT VIDEOS AS ALWAYS 🤗🤗
Thanks bro
I wish I could learn skills you got..how you learn all this please make a dedicated video
Dude!! Great timing with this vid
I came across your videos again and was wondering what had happened
👌👌 Glad you are back and enjoying the content.
I'm already looking forward to your next build ;)
Good job bro
Nice work... Good to see your progress
More to come!
Bro, you're doing a great job as always. The fairings looks so good
Can you say where did you buy the brake discs?
Off Facebook market place 😅
Good job! But...right front brake disk it's OK? Seems two left disks
Made like that not sure why.
Anyway Garreth! Congrats, very very nice work. Someday we will see you.
You went this far but the throttle tube looked broken at the end! Again love the detail and shots...Do you give a price break down and how much you got the crashed bike for?
Couldnt find a new throttle tube. Hard to find parts for this bike. But the throttle tube it has still works and this build is being dragged too long needs to be finished. Unfortunately I do not break down how much everything costs.
GOOD👍🏼完成が楽しみです😆
Great job so far i love the exhaust
You've gota clean the front headers up mate
Even if I did it wouldnt stay that way for long.
Stellar work man👌
I like your videos and you show pictures of completing the bike?
On instagram yes
You are the best,,,,,✌️✌️✌️
Thanks bro
Galing mo brad.
Wooww incredible 👍👍👍
Thanks for watching
Great work, gonna b fire!!!!!!! Whr did u get the fairings
Love the vids man, very inspiring
Glad you like them!
Instead using a heatgun you can use a gas-burner
Keep up the great content
Sweet!! What clip on’s are you running?
Think they are vortex
GOOD
brake disks direction
Love your work dont cut no corners... just have to ask were did you get the SC project Tail piece?
I find second hand exhausts on facebook market place. New ones are too expensive. Hopefully as the channel grows il be able to afford new ones.
thanks for the videos. one quick question, how did you know how much torque you need for different parts?
Got the manual for all the torque specs
@@GarrethCollins thanks!
nice wheels...
i have a little question plz...i changed the flywheel of my fz8 (2011) the magnets shattred inside...i put a new one and after some rides, it did shattred again....can the bearing be the problem?
Check the bearing or look for vibrations. Something doesnt sounds right. Fly wheel could be rubbing against the magnets. Causing friction
How about Garreth, greetings from Mexico, I am a big fan of your work, I really like the restoration you do to the motorcycles, I would like to know where you buy the spare parts for the zx6r, I have one like it and it needs a lot of maintenance.
Mainly Facebook market place.
Hey mane is it possible to get me one of those same fairing set ?
Top D+
Hey Garreth, ever thought of turning this into a business by buying fixing and selling bikes
Too be honest i dont like dealing with customers too much of a headache 😅
Where do you buy your fairings?
Make more video 📹 rebuild bike
will that exhaust not burn the pillions leg? sounds great
Who says i ride with a pillion 🤣
@@GarrethCollins I used to LoL and went all the way from Cape Town to Namibia with that flat back seat.
@@KnightsMultiMediaCapeTown 🙄 wow that would be one hell of a ass ache 😂🤣
Waiting for this upload ❤️
Nice vid! Will you paint the brake calipers?
Nah. Keep them as they are.
Yo
♡
💯👍
Brah please come show Italians🇮🇹 how to customize bikes🤣
🤣🤣🤣😂😂
❤️❤️❤️❤️
小城镇 碣石出品 哈哈哈
29th
There is always next time
👍👍👌✌️
😟☹️