coming from someone who bought a vehicle specifically to wrap, I was only looking for black,silver or grey (white shows too much). Ended up with silver and it’s never bothered me 2 wraps in :)
That color is fire 🔥 and your one of my favorite RUclipsrs that does what u do to peoples cars and I still watch your vidoes and been watching when u had less then 50k subs
Yes, Knowing Low vs High Surface Energy is very important for proper adhesion. Wrapping is both an art & science. Also w/ color changes (without removing all accessories which increases price dramatically) attention to the contrast of the applied color against the base color is crucial for good coverage results.
Watching the man work on sped up view sooo makes it seem simple but he is a freaking guru . Years he has been at it makes him legend and quality speaks of skill. Mad props.
Just incredible....and I love the red door jams.... it's probably tomato tomatoe on that but for me, outstanding!...You are a genius and yes. it's way more aggressive....good job!...."it turned out to be sooo much better"...
Man that's beautiful. Been trying to decide on paint scheme for my 5 th gen Camaro and now I've found it. The ho is black so jams and under hood would flow .
Paradox what’s up bro! I enjoy your videos. I have noticed when u wrap over primed areas u don’t sand them. So when u wrap it looks very dirty and u can see it thru the wrap. A quick hand sand with 320 and some IPA should do the trick. Most the cars u do are very custom so this tip should do them best. Try it out and u will see. Keep these coming because I learn from u too.
yes that is correct but, the deal is that people need to sand their stuff before coming to me. I dont do any bodywork at all so if you bring it rough im wrapping over it.
@@ParadoxTheWrapper not a good business attitude. The finished product is a reflection of your work. If the car is not ready, say no. People looking at the work after don't care if the owner prepped the car, they just see bad work.
One thing people miss on these cars and circles in general; you can take those lights out and lay a piece over the hole and cut a circle in the middle and it will stretch right in without issue. I’ve done it tons of times. Soooo much easier!
I don’t think people realize how difficult this is to do by yourself. Wrap shops have 2 or 3 experienced people doing one car. He lays it all out on his own. Props bro
Yeah bro I work at a wrap shop and wrap whole cars by myself everyday. This is nothing special. He cuts corners. Spray paints the edges of body panels to he doesn’t have to fully tuck all the way. Doesn’t take emblems off nor does he take trim off. I’d be highly impressed if just one of these wraps he does last longer than a week without any lifting.
Paradox stop tell on camera what you couldn’t do because that customer is grinning ear to ear. He’s hella satisfied. Your talent and results go hard. Don’t sell yourself short. You’ve made a name in the wrap game. Word of mouth has spread. You don’t me to tell you; You got this brotha👌
Dude does mediocre work with Chinese material that scratches and fades easy because it’s so thin and nonetheless over price it. He doesn’t even wash the cars before he wrap, much less the work he do is a 6/10 at best. Got a couple complains about dude on Reddit wouldn’t let him wrap my push scooter 😂😂
How were you able to make those cuts on the tail lights and the fender /hood vents without having something to tuck it. Isn't that going to peel up quickly?
Will that color wrap fade over time in the sunlight? I’ve heard that fluorescents will fade in the sun. Not sure if that’s true or if that color is a fluorescent?
thanks for the quality videos Paradox, the more i watch the more i feel confident i can do this myself, i do have a question, maybe you can point me to one of your videos, i have older civic with some peeling clear coat..im guessing i need to sand away the peeling clear coat and then wrap the car or is it ok to wrap over heavily messed up clear coat
Don't wrap over messed up clear coat. It'll come off on the wrap and you'll lose that piece not to mention you'll see and the messed up clear coat under the wrap. Sand it smooooth
Are you telling me the owner of the Vette had his primed panels smoothed and ready for paint but he rather spend money on a wrap that'll only last 2 years? Bruh lmao.
His name is "ParadoX 'the' WrappeR" and he wraps like no other. Bring it to him smooth and don't make it need sander. The clues in the name "ParadoX 'the' WrappeR"....not "sander," but wrapper.
2:35 if I left the door gap like that I would have gotten yelled at back in my bodywork days. I see some creative stuff on RUclips but seriously the finish work is, well it’s RUclips. The car looks wicked tho and with a few more hours of work before the finish it could have been SEMA.
The red door jams kill the entire wrap. If there was anything he needed to spraypaint black, it was those areas.
Main reason I have never wrapped a car. As soon as you open a door the entire aesthetic of the car is ruined.
@@seancobb7653 Only one that would probably be acceptable to wrap would be black since the insides on stand out as much
coming from someone who bought a vehicle specifically to wrap, I was only looking for black,silver or grey (white shows too much). Ended up with silver and it’s never bothered me 2 wraps in :)
Its not an issue to wrap it black or spray or black after
Good work. That color is crazy!!!
That color is fire 🔥 and your one of my favorite RUclipsrs that does what u do to peoples cars and I still watch your vidoes and been watching when u had less then 50k subs
Yes, Knowing Low vs High Surface Energy is very important for proper adhesion. Wrapping is both an art & science.
Also w/ color changes (without removing all accessories which increases price dramatically) attention to the contrast of the applied color against the base color is crucial for good coverage results.
My favorite part of every video?.....the stance he does for laying on the front bumper. excellent form! :D
Looks great always killing it with the wraps 🔥🔥🔥😎
Watching the man work on sped up view sooo makes it seem simple but he is a freaking guru . Years he has been at it makes him legend and quality speaks of skill. Mad props.
Thanks for the support fam!
You can always tell when someone has been doing it forever.
That 08 body style still looks better than a C8
That is awesome! Quite a transformation on that car.
Sick color, mad skills... great car. Thanks for the content, cheers
Just incredible....and I love the red door jams.... it's probably tomato tomatoe on that but for me, outstanding!...You are a genius and yes. it's way more aggressive....good job!...."it turned out to be sooo much better"...
Those fenders could easily have been done in one piece tho
Tight AF...thing looks amazing and just enough black to set it off! 👌 🍻
Man that's beautiful. Been trying to decide on paint scheme for my 5 th gen Camaro and now I've found it. The ho is black so jams and under hood would flow .
Paradox what’s up bro! I enjoy your videos. I have noticed when u wrap over primed areas u don’t sand them. So when u wrap it looks very dirty and u can see it thru the wrap. A quick hand sand with 320 and some IPA should do the trick. Most the cars u do are very custom so this tip should do them best. Try it out and u will see. Keep these coming because I learn from u too.
yes that is correct but, the deal is that people need to sand their stuff before coming to me. I dont do any bodywork at all so if you bring it rough im wrapping over it.
@@ParadoxTheWrapper you tell em bud
No freebies here
@@ParadoxTheWrapper I agree 👍 time is money
@@ParadoxTheWrapper not a good business attitude. The finished product is a reflection of your work. If the car is not ready, say no. People looking at the work after don't care if the owner prepped the car, they just see bad work.
what a beautiful color but your work is also wonderful many greetings from Germany ❤
Nice color! I would have liked to have seen those mirrors done.
Paradox , Thank GOD your back.
we missed you 😃
Nice work ....connecting from the Caribbean (Trinidad and Tobago)
Amazing job 💯🔥🔥🔥🔥
forming around the side mirrors looks a little tricky but you made it look easy...
One thing people miss on these cars and circles in general; you can take those lights out and lay a piece over the hole and cut a circle in the middle and it will stretch right in without issue. I’ve done it tons of times. Soooo much easier!
Fn sweet color choice!
I don’t think people realize how difficult this is to do by yourself. Wrap shops have 2 or 3 experienced people doing one car. He lays it all out on his own. Props bro
Not true it’s typical to have one guy to a car
Yeah bro I work at a wrap shop and wrap whole cars by myself everyday. This is nothing special. He cuts corners. Spray paints the edges of body panels to he doesn’t have to fully tuck all the way. Doesn’t take emblems off nor does he take trim off. I’d be highly impressed if just one of these wraps he does last longer than a week without any lifting.
@@prestonbrowning6722 also hate the unpainted and no primer body kit, you can literally see the imperfections through the wrap
@Jakob this is what I spoke about in my comment I feel like this guy just tries to get away with doing the least amount of work possible
He has a helper, you can see him in the vid
Paradox stop tell on camera what you couldn’t do because that customer is grinning ear to ear. He’s hella satisfied. Your talent and results go hard. Don’t sell yourself short. You’ve made a name in the wrap game. Word of mouth has spread. You don’t me to tell you; You got this brotha👌
Awesome job!
Now he is a resourceful car enthusiast. What’s so cool about this customer is he’s mild mannered wit a banging Vette👀👌
C'était génial. Bravo pour l'affichage. J'apprends beaucoup de choses avec vous. C'est ce que je fais et moi non plus👍✨🔥❤❤💪
Fresno, Ca 🔥 hopefully I see it around😎
Absolutely stunning! Watching your videos really have helped me out! Been here since 50k subs and still on it 🫡
Thats that 40 ft wrap job looks good at 40 ft
Min 24:49 look at that tuck job between the fender and the door lmaooo
Not to talk shit, but that was exactly where my eyes went too, I would ask him to re wrap that shit
Absolutely, half assed job
Dude does mediocre work with Chinese material that scratches and fades easy because it’s so thin and nonetheless over price it. He doesn’t even wash the cars before he wrap, much less the work he do is a 6/10 at best. Got a couple complains about dude on Reddit wouldn’t let him wrap my push scooter 😂😂
@@inVAINwetrusthow do you know he does not wash the cars?
Fr. All his cuts are always jagged and shit. Half ass jobs he does smh
That is awesome young fellow already
Should’ve painted vents on the hood too.
22:04 need to wrap the jam
How were you able to make those cuts on the tail lights and the fender /hood vents without having something to tuck it. Isn't that going to peel up quickly?
Any spray paint will work.?my truck is primer some spots my wrap didn't stick want to try a different method
I just bought a daily beater and wanted to wrap it what budget friendly vinyl would you recommend me especially for a beginners
Wasn’t sure about that color but with the black trim 👍
Will that color wrap fade over time in the sunlight? I’ve heard that fluorescents will fade in the sun. Not sure if that’s true or if that color is a fluorescent?
Where can I buy a small piece of wrap? I want to attempt to wrap my fender before I spend money on a whole roll of wrap.
I use to work at macco ✌️
FIRE 🔥
The shout out for Fresno though 🔥🔥🔥
thanks for the quality videos Paradox, the more i watch the more i feel confident i can do this myself, i do have a question, maybe you can point me to one of your videos, i have older civic with some peeling clear coat..im guessing i need to sand away the peeling clear coat and then wrap the car or is it ok to wrap over heavily messed up clear coat
Don't wrap over messed up clear coat. It'll come off on the wrap and you'll lose that piece not to mention you'll see and the messed up clear coat under the wrap. Sand it smooooth
How come the inside door doesn’t get wrapped? Specially when mixing colors that don’t match well I see that a lot
Good job broo 👍👍🔥🔥
The OG!
Very nice !!!
What does it cost to wrap a c6 corvette. May want to change the color on mine.
quality said good buy in this video(((((
LOL
Looks awesome!! How much for something like that?
This is so dope I was happy for the owner of the C6 🔥🔥🔥🔥 the color looks crazyyy👊👊👊👊
The "Corvette" imprint on rear bumper? What happened? Look at the bumper (bottom right) before the wrap and then after.
Clean
When are going to show us how Luna is doing. She’s a beautiful Mastiff. I remember when u flew to Texas to get her. So gives us n update when u can.👍
Vette on te's look pretty good
I have a c4🤗 thinking 🤔 about wrapping, what 💵 amount 🧐 I looking at👀
"yeh pretty muhch"
In general aftermarket panels look and fit like shit
Car looks awesome! I think it would look even nicer if he did the back bumper black as well
A paradox where do you get your music for your videos?
came out fire but TEs don't compliment corvettes need something more aggressive
HARD! That Vette is KOLD!
If u do it bro we no it worx 👌🏼☝🏼🔥
How does a job like this cost? Say you wanted to do this in a vw classic bug?
How long do wraps last? Do they have an issue with getting dried out and cracking from sun?
I've seen some guy who wraps cars professionally say that he wouldn't be surprised if this wrap lasted a month so I'm guessing its not do very well
What’s that doing when wrapping
Crazy glue ✌️
Completely off topic....anyone know what spoiler is on the s13? Think i need that on mine 👀
i found it on FB marketplace lol. that wing is hella sick
In real time, how long did that take?
I remember Maddy Evo color. Whatever happened to her? She stop making vids. I wish her well👍
Riced vette kinda clean tho
How much is for that wrap?lmk
How much did you charge for this wrap ?
Sac town boy!!!
NEEDED TO DO DOOR JAMS..RED LOOKS LIKE POOP!😮
Looks good but if the surface wasn't perfect, you should have told the owner to sand it so you won't see the bumps.
Truck bed black ✌️
I woulda paint matched the kit on the car. Woulda been so much cleaner
Bro. How much is that wrapped ?
Are you telling me the owner of the Vette had his primed panels smoothed and ready for paint but he rather spend money on a wrap that'll only last 2 years? Bruh lmao.
“Tuna no crust”
It's the Gir edition. From invader Zim!
Mop it ! ✌️
Can you go through a car wash in the wrap..?
No you have to hand wash it
Can a car be wrapped with printer paint?
Do you need a helper in your shop I'm willing to learn 😊
It's cali you know that man can't really mod that car.
He needed to work on the panel gaps before he had to wrap it
I don’t know if automotive porn is a thing but if it is this is XXX! Incredible!
Whats the music playing @8:12
Viking's Land - Valknut's Song (Valknut's Extended Mix)
Awesome color, but aren't lemons yellow and limes green? 😂 🍋🍈
I feel like a bowl of pea soup now
Better than pee soup
Sweet bandade🤪
i think you should at least week, to let this spray degas
Where are you from fella? :D
Leaded gas okay ✌️
His name is "ParadoX 'the' WrappeR" and he wraps like no other. Bring it to him smooth and don't make it need sander. The clues in the name "ParadoX 'the' WrappeR"....not "sander," but wrapper.
2:35 if I left the door gap like that I would have gotten yelled at back in my bodywork days. I see some creative stuff on RUclips but seriously the finish work is, well it’s RUclips.
The car looks wicked tho and with a few more hours of work before the finish it could have been SEMA.
That customer lookin at all the ig comments 👁️👁️
Only the weak care about what strangers on the internet think about them
Lol he prolly feels ashamed too 😂🤮