I bought a used router plunge base and very easily adapted it to my drill, it took me about 10 minutes, and a total expense of 17 euros (Epoxy clay included). To be able to make what you do here you have to start by having a tools' arsenal, not to mention a LOT of free time!
I agree, adaptation of existing things is the simplest and cheapest. However, I need longer guides, I will easily put on a 15 cm drill bit, in addition to such work as the one shown at the end of the film, the router plunge base works too hard for me. I could also buy such a guide in the store, but what would I record a movie about? ;)
Jedziesz do Castoramy i kupujesz taką za niecałą stówkę. Jak Ci się nie chce jechać to siedzisz w warsztacie i myślisz co tu zrobić żeby się nie narobić, a zrobić. Po czym zbierasz odpady warsztatowe i robisz coś co mogłeś kupić w Castoramie i po chwili lub kilku godzinach masz już gotowe i cieszysz się tym, jak małe dziecko. I jaki z tego morał ?? ano taki, że przyjemność pracy przyrządem własnoręcznie wykonanym jest wielka, a dziś coraz mniej ludzi którzy potrafią lub chcą zrobić samemu. Gratulacje i pozdrowionka
Do Castoramy mam 70 km ;) no i jak bym kupił, to o czym bym film zrobił? I tu masz rację, cieszę się jak małe dziecko i do tego sprężyny pierwszy raz miałem okazję robić. Krzywe... ale są :D Dzięki i również pozdrawiam!
jest możliwość kupna od pana takiego statywu ? zależy mi również na blokadzie wysokości jako frezarkę trzpieniową górnowrzecionową bym chciał go wykorzystać
Making a drill press but you need a drill press to make the drill press.... I dont have a drill press thats why Im watching a video to make a drill press but didnt realize I would need a drill press to make this drill press...
Nice jig! Some interesting tricks, like how he threads those springs. And plugging the bushings with a clamp. But freehand routing a circle inside such a tiny workpiece was giving me anxiety just watching! The builder is obviously quite skilled, DIY’ers who are not so experienced with a router would be much better off with a template and pattern bit! All in all very nice build but an extraordinary amount of work…
Nice build good job Where can I order the material for this project plexiglas and rods ?? Size of rods and dimensions of plexiglass. And material for springsThanks!!!
Thanks George! The springs are made of 1 mm spring steel wire but are a little too soft, would be better with 1.2 - 1.5 mm wire. You should also remember about heat treatment of formed springs.
Dzień dobry! Sprężyny robiłem z drutu sprężynowego 1mm, ale lepiej zrobić z grubszego ok 1,5mm. Najmniejsza wiertarka z filmu ma ok 1kg wagi i sprężyny "na luzie" ugięte są przy niej już do połowy. Istotna jest też obróbka cieplna po ukształtowaniu sprężyny.
Springs require heat treatment after forming, I did it with a torch, by eye. Springs are doing well but I'm not sure if I did it correctly, it was the first time I did it.
Great tool! Thanks for the video! Pretty clear, good looking and I laught a lot when you miss and sudenly appear "SUBSCRIBE" hahaha. In fact, I'm subscribe. This is the first of your videos that I look and I will watching more. Saludos from Argentina.
But at the very end of the video I was drilling with a router ;D For me, the main application for this attachment is drilling, it can be used as a substitute plunge base for router but you have to take into account that it is not too stiff (only small bits) and you will need to add a depth lock.
very neat build. I like the perspex base plate so you can see through to the work. One question. How did you make the compression springs, what steel wire did you use to form the springs (this was very clerver).
Thanks barry8082! I made the spring steel wire 0.5mm in diameter, but they are too soft, it is better to use a thicker wire. After forming, they still need to be heat treated, I did it with the torch and the springs work correctly, but I do not know if I did everything good. There is a lot of information on the subject on the web.
Or you did not watch the movie to the end and did not read the description, or you did not understand. Anyway, thanks for not considering writing a comment a waste of time :)
Nice... Don't Take serious Don't mind just joke Bro.. Dear this process is very hard Like you wont eat a Ice-cream only 1 cup so... Don't make At Home otherwise wife face is 🤬🤬🤬🤬🤬.
такой Фрезер стоит евро 30 ть А на барахолке или подержанных ещё дешевле, Судя по инструменту который у тебя в гараже находится тебе это хрень явно не нужно окушка от макиты и так далее 100% у тебя где-то оригинальный Фрезер на полочке завалялся Ты просто забыл мужик а так идейка неплохая Или ты просто хотел показать что это возможно и своими руками
![DIY Drill Guide - Making Portable Drill Guide Jig [Free Plans]](http://i.ytimg.com/vi/9gQrBysTD00/mqdefault.jpg)
This is the best technical solution that RUclips has ever seen 😎😉
Nice guide on making a guide. I love that you wound and heat treated your own spring.
great respect to people who know how to work with their hands
4:45 ... oh nice one!! very clever
Espetacular esse trabalho, gostaria de saber como vc consegue esses gabaritos ?
I bought a used router plunge base and very easily adapted it to my drill, it took me about 10 minutes, and a total expense of 17 euros (Epoxy clay included). To be able to make what you do here you have to start by having a tools' arsenal, not to mention a LOT of free time!
I agree, adaptation of existing things is the simplest and cheapest. However, I need longer guides, I will easily put on a 15 cm drill bit, in addition to such work as the one shown at the end of the film, the router plunge base works too hard for me.
I could also buy such a guide in the store, but what would I record a movie about? ;)
@@CatLighting no
Очень понравилась разметка центра под сверление при помощи линейки обычного угольника, я сделал для этого приспособление, а можно было и не делать.
Pure Genius. Excellent.👍
کارت دقیق ، عالی و هنرمندانه است . آفرین ...
Хорошо получилось! Если добавить отверстий в акриле, можно прикрепить его к панели и получить стационарный станочек.
Отличная идея!
зачем? струбцинами к столу прижать, и все дела! лучше, чем каждый раз откручивать
@@БорисЕрёмин-н1м Тоже верно.
absolut genial und so einfach für jeden Bastler her zustellen :-)
Jedziesz do Castoramy i kupujesz taką za niecałą stówkę. Jak Ci się nie chce jechać to siedzisz w warsztacie i myślisz co tu zrobić żeby się nie narobić, a zrobić. Po czym zbierasz odpady warsztatowe i robisz coś co mogłeś kupić w Castoramie i po chwili lub kilku godzinach masz już gotowe i cieszysz się tym, jak małe dziecko. I jaki z tego morał ?? ano taki, że przyjemność pracy przyrządem własnoręcznie wykonanym jest wielka, a dziś coraz mniej ludzi którzy potrafią lub chcą zrobić samemu. Gratulacje i pozdrowionka
Do Castoramy mam 70 km ;) no i jak bym kupił, to o czym bym film zrobił? I tu masz rację, cieszę się jak małe dziecko i do tego sprężyny pierwszy raz miałem okazję robić. Krzywe... ale są :D
Dzięki i również pozdrawiam!
Bonito y bien pero me gustaria que mandaran las medidas y enseñaran que tipo de brocas se para cada trabajo mostrarlas
haha, love the "subscribe" message whenever something goes wrong.
Сколько высокотехнологичной мозго5бки. Я один так думаю?
хаха. Нет,я тоже солидарен :) Сначала создадим трудности,а потом преодолеем.
jest możliwość kupna od pana takiego statywu ? zależy mi również na blokadzie wysokości jako frezarkę trzpieniową górnowrzecionową bym chciał go wykorzystać
Naprawdę dobry pomysł!
good idea ang usefull for drilling.
O vídeo ficou ótimo..👏👏👏..certamente vai inspirar muita gente. E muito informativo também.
I am waiting for Like this template, today i got it from you Thakyou very very much Sir.
Making a drill press but you need a drill press to make the drill press.... I dont have a drill press thats why Im watching a video to make a drill press but didnt realize I would need a drill press to make this drill press...
Молодец наглядно красиво Спасибо
Good job
great job sir !, thanks for sharing this video
Muchas gracias por enseñar estos lindos trabajos que son utiles
Nice jig! Some interesting tricks, like how he threads those springs. And plugging the bushings with a clamp. But freehand routing a circle inside such a tiny workpiece was giving me anxiety just watching! The builder is obviously quite skilled, DIY’ers who are not so experienced with a router would be much better off with a template and pattern bit! All in all very nice build but an extraordinary amount of work…
Gracias maestro.
Saludos desde Quilpue Chile.
Gracias! Saludos desde Polonia!
Ficou top lindo projeto parabéns Ramiro do Brasil.
Excellent!! What a great job, congrats!!!
Thanks for the video & template. Really appreciate your brilliant idea!
That's some very nice and well thought out work! 👍 👍
Thanks Sparky!
Good idea, excellent.
Buen trabajo e idea, saludos desde Punta Umbría-Huelva-España.
Gracias! ¡Saludos desde Polonia!
impressive!
What are the dimensions
of the:
1. Metal rings diameter
2. Pillars length and diameter
3. Base plate with thickness
4. Kind of wire used for spring
Very good job
Good craftsman.
Muito legal e muito prático
Very good job & video. Thank u
very good job
Thank you for not removing the most basic thing from the video - there may be errors.
Just one word.. Great !
Profissional !!!! Parabéns !!!!
I have uploaded the template, maybe it will be useful to someone: catlighting.art/pliki/drill_guide.pdf
Thanks for sharing the template 👍👍👍👍great work
Thanks for sharing the template
Hope it works for my drill. Thank you so much for template.
thanks for sharing the template, this design is simple and easy to do. thanks.
Спасибо за шаблон, это приятный бонус к полезному видео.
I enjoyed it! :)
You need a drill press to built one...
Do you still have the plan
fantastic !!!!!
Beautiful Jjg.... :-)
Bom dia amigo meus parabéns
Witam super film . Czy mógł bym użyć część Pana filmu do mojej kompilacji o wynalazkach Domowej roboty ?
Dzięki! Jeżeli tylko kanał będzie oznaczony na filmie, to bierz ;)
@@CatLighting nie ma problemu dziękuje i pozdrawiam
Wonderful tool . I made a drilling machine out of a typewriter. Check the design.
Здраствуйте я бы хотел такую стойку тоесть чертёж ,как это возможно преобрести у вас
I liked your edition :D BTW watching your video from Czechowice :)
To w takim razie dzięki i siema ;)
Boa noite amigo, é possível postar o download do projeto novamente em pdf pois não estou conseguindo através do link do comentário. Obrigado.
Estranho, a ligação funciona para mim. Carreguei novamente para o servidor, talvez seja melhor. Saudações!
Também não consigo aceder através do link. :(
Great video man, I like your style! Liked and subbed
Thanks!
wonderfull i subscrive imideatly as soon as i see the pdf ... only one i see doing this,,
Hi Could you please tell me the thickness of the wire you made the spring
Check the description :)
thinks a lot
Good job. Carefully, the hair on your head may wind up on the drill..
Thanks for the video. Сразу видно что заграница...с меня лайк
Usually when the hair begins to approach the tools dangerously, they go under the scissors and then I get back to work :) Pozdrowienia z Polski!
Deberías de ir explicando
Такое впечатление, что сверлильный станок, вот - вот рассыплется.
Nice build good job
Where can I order the material for this project plexiglas and rods ?? Size of rods and dimensions of plexiglass. And material for springsThanks!!!
I used to buy in Poland, so links to these shops are unlikely to be useful to anyone. You have to look in the shops in your country. Cheers!
What kind of wire you used to build the springs btw is amazing
Thanks George!
The springs are made of 1 mm spring steel wire but are a little too soft, would be better with 1.2 - 1.5 mm wire.
You should also remember about heat treatment of formed springs.
Amigo una pregunta que tipo de programa utilizas para crear estas plantillas. gracias
Utilizo CorelDraw pero también puedes hacerlo en Adobe Illustrator o en el programa gratuito Inkscape. Saludos!
Good man!
Great tool.......are those wrist watches back? Had one 30 years ago........
Thanks!
These watches are still being produced, at this time the phone book with ten records is the best ;)
so it's only good for perpedicular 90° holes
Exactly, I only need a stable 90 ° so I didn't complicate it.
Ribja corba
@@jovicabojkovski1577 ale... że o co chodzi?
Nice project, but you work very unsafely. 😮
Однозначно лайк
Dzień dobry, proszę powiedz mi, z jakiego drutu wykonana jest ta spirala. Z góry dziękuję.
Dzień dobry! Sprężyny robiłem z drutu sprężynowego 1mm, ale lepiej zrobić z grubszego ok 1,5mm. Najmniejsza wiertarka z filmu ma ok 1kg wagi i sprężyny "na luzie" ugięte są przy niej już do połowy. Istotna jest też obróbka cieplna po ukształtowaniu sprężyny.
@@CatLighting Dziękuję za odpowiedź
Why did you heat springs?
Springs require heat treatment after forming, I did it with a torch, by eye. Springs are doing well but I'm not sure if I did it correctly, it was the first time I did it.
@@CatLighting thanks
Good, but I decided to buy it instead
Awesome!!!. I will make a miniature one for my D.I.Y , thanks, SUB!!
УАХАХАХА ФИГА СЕ СВЕТОВОЕ СОПРОВОЖДЕНИЕ,ТЕ РЕКЛАМУ СНИМАТЬ НАДО
Great tool! Thanks for the video! Pretty clear, good looking and I laught a lot when you miss and sudenly appear "SUBSCRIBE" hahaha. In fact, I'm subscribe. This is the first of your videos that I look and I will watching more. Saludos from Argentina.
Thanks for awesome comment Federico! Saludos from Poland.
Waooow...
Thanks for the video, but your design is very complicated, and I certainly could not make it with the simple hand tools that I own.
Do you have a link for the springs?
No, I was buying spring wire only... in Poland :)
That's a lot.of work, but good job
А НЕ ПРОЩЕ В ФАНЕРКЕ РОВНОЕ ОТВЕРСТИЕ ПРОСВЕРЛИТЬ КОРОНКОЙ?
Да, но я был не такого размера.
The final video didn't show you used it as a router. Instead you just show how its used as drill press.
But at the very end of the video I was drilling with a router ;D
For me, the main application for this attachment is drilling, it can be used as a substitute plunge base for router but you have to take into account that it is not too stiff (only small bits) and you will need to add a depth lock.
나무에, 아크릴판에, 쇠봉에, 볼트 너트, 순간접착제, 양면테이프등 원가만 해도 얼마냐? 그냥 하나 사고 말겠다.
very neat build. I like the perspex base plate so you can see through to the work. One question. How did you make the compression springs, what steel wire did you use to form the springs (this was very clerver).
Thanks barry8082! I made the spring steel wire 0.5mm in diameter, but they are too soft, it is better to use a thicker wire. After forming, they still need to be heat treated, I did it with the torch and the springs work correctly, but I do not know if I did everything good. There is a lot of information on the subject on the web.
@@CatLighting Thanks for your reply. If i ever aquire enough skill, i will use your technique but use 1.00mm wire. best wishes for the new year.
Good solution! If you want more subs, feel free to embed your video on our homemade tools forum; looks like you're one of us :-)
Thanks! I will definitely check :)
Ola
Creatife COOL
hay
You are creative and I like you so much can I communicate with you
I thought there was a cow at 7:17.
😄
@@CatLighting Hehe! Good video dude - I'm gonna try and make one of these for my Dremel. Thanks!
That great the video is useful. Go and make, that's the best part :) Thanks!
Спасибо!!!
Peccato che non c'è la spiegazione orale.
Non mi va di descrivere questo processo in altre lingue, nemmeno in inglese.
why don't u buy a router then return it.. or.. harbor friehgt sell angle drill jig for under $19 without coupon
Why should i? ;)
You are watching a DIY and asking why not buy?
ممتاز جداا
🤔🤔
Дня четыре, а то и пять строил?
Работа полдня. Установка клея расширяется.
What a waste of time. If I need a drill press to make it then what is the point.
Or you did not watch the movie to the end and did not read the description, or you did not understand. Anyway, thanks for not considering writing a comment a waste of time :)
Nice...
Don't Take serious
Don't mind just joke Bro..
Dear this process is very hard
Like you wont eat a Ice-cream only 1 cup so...
Don't make At Home otherwise wife face is 🤬🤬🤬🤬🤬.
Too much work
BLZ
У тебя что нет нормальных больших ножниц? Режет бумагу маникюрными.
такой Фрезер стоит евро 30 ть А на барахолке или подержанных ещё дешевле, Судя по инструменту который у тебя в гараже находится тебе это хрень явно не нужно окушка от макиты и так далее 100% у тебя где-то оригинальный Фрезер на полочке завалялся Ты просто забыл мужик а так идейка неплохая Или ты просто хотел показать что это возможно и своими руками
Да :D