Heart shaped natural edge walnut bowl Part Three, Turning with voids

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 101

  • @gilgrace1915
    @gilgrace1915 8 лет назад +1

    The entire series was well done. Easy to understand explanations and demonstrations. The finished bowl is spectacular as well.

    • @Lyle
      @Lyle  8 лет назад

      +Gil Grace Thanks Gil, Nice to hear from you again.

  • @bd3952
    @bd3952 5 лет назад

    12:02-12:12 was a perfect demonstration highlight, for me. Thanks.

    • @Lyle
      @Lyle  5 лет назад

      Nice to hear from you, Thanks for writing.

  • @geofkusch3934
    @geofkusch3934 3 года назад

    Just rewatched this series, Lyle, and it is excellent. Very clear and understandable total process. I particularly like the emphasis on design and alignment in preparation and the meticulous finish turning to uniform thickness.

    • @Lyle
      @Lyle  3 года назад

      Thanks for the feedback Geof. Have you seen I am doing Interactive Remote Demonstrations?? Live and interactive. See my web site for details. lylejamieson.com/product-category/live-interactive-remote-demonstrations/

  • @tja490
    @tja490 8 лет назад +1

    This is one of the best videos that I've seen showing the bevel cut. The closeups "looking through the air" really make it clear.
    Thanks for a great lesson!

    • @Lyle
      @Lyle  8 лет назад

      +Tom Albrecht Thanks Tom, Glad you like it.

  • @niklar55
    @niklar55 4 года назад

    I have two pieces of crotch that I've been delaying work on until I feel confident to start.
    This demonstration has filled in a lot of the voids in my knowledge, especially the use of the gouge, with regard to NOT cutting into the thick part of the waste-wood.
    I think I'll practice on an easy piece of wood before I try the crotches tho'!
    Thanks very much.
    Nik

    • @Lyle
      @Lyle  4 года назад

      Thanks for watching Nic. The RUclips videos are only small pieces of the puzzle. A better learning tool would be my Bowl basics DVD. You get the continuity of the whole process. A crotch is no harder than a regular bowl. Go For It!!

  • @chrisreuter1934
    @chrisreuter1934 2 года назад

    Great Series! I've turned heart shaped bowls before, but they never came out as accurate as yours. This series has really helped my work. Thank you.

    • @Lyle
      @Lyle  2 года назад

      Hi Chris, Thanks for the feedback, glad to help. Have you seen I am doing IRDs?? To see schedule and purchase a ticket for LIVE with Lyle, go to my web site. See more detailed information on my website lylejamieson.com or lylejamieson.com/product-category/live-interactive-remote-demonstrations/
      I will be scheduling a new topic next week.

    • @chrisreuter1934
      @chrisreuter1934 2 года назад

      @@Lyle sorry but what is an IRD?

    • @Lyle
      @Lyle  2 года назад

      @@chrisreuter1934 Interactive Remote Demonstration. Live and interactive. Had almost 200 people on my zoom call for the demo last night. Email me and I can add you to my notification list for events I am involved in.

  • @stupid101ification
    @stupid101ification 8 лет назад

    Lyie, you are on the top notch with your teachings and an inspiration to go out to the shop and start "makin shavins"
    Thanks
    Mr Carrol

    • @Lyle
      @Lyle  8 лет назад

      +Carrol Adams Thanks Carrol, Its all about the fun, enjoy your time at the lathe

  • @gilbertbesnard
    @gilbertbesnard 8 лет назад +2

    One of the best woodturning video I have seen, very instructional. Thanks for sharing your knowledge!

    • @Lyle
      @Lyle  8 лет назад

      +Gilbert Besnard Thanks Gil, My pleasure.

  • @naorshachar
    @naorshachar 8 лет назад

    watching you and learning is a pleasure (every time)

    • @Lyle
      @Lyle  8 лет назад

      +‫שחר נאור‬‎ Thank you!!

  • @alansimpson596
    @alansimpson596 8 лет назад

    I've greatly enjoyed this three part series and hopefully learned a lot from it so many thanks.

    • @Lyle
      @Lyle  8 лет назад

      +Alan Simpson Thanks Alan, nice to hear from you.

  • @donaustin3461
    @donaustin3461 6 лет назад

    Thank You, a great series. Your videos have taken the mystic along with the catches away from turning. Oh I'll still get em but hopefully not as much. Thanks

    • @Lyle
      @Lyle  6 лет назад

      Glad to help Don, thanks for the feedback.

  • @mitchellmanning7887
    @mitchellmanning7887 6 лет назад

    Excellent 3 part series,look forward to checking out your other videos,thanks

    • @Lyle
      @Lyle  6 лет назад

      Thanks for the feedback, keep in touch.

  • @martinsdmd
    @martinsdmd 8 лет назад

    Love it. Love the camera work also. A rustic heart is not bad either, lol. Thanks again for the great teaching!!!

    • @Lyle
      @Lyle  8 лет назад

      +Steven Martin Hi Steven, I agree the bark looks good sometimes, and rustic is not a bad thing. Just send a consistent message to the viewer. Thanks for the feedback.

  • @raymondmichielinijr5490
    @raymondmichielinijr5490 Год назад

    Truly expert, excellent tutorial thank you

    • @Lyle
      @Lyle  Год назад

      Hi Raymond, Thanks for watching and for the feedback.
      Have you seen I am doing IRDs?? To see schedule and purchase a ticket for my LIVE and interactive demonstration with Lyle, go to my web site to see more detailed information, lylejamieson.com or lylejamieson.com/product-category/live-interactive-remote-demonstrations/
      I do a different topic every 3-4 weeks. My web site has a sign up for notifications when I schedule the next one on the bottom of most pages.

  • @pottsydeep
    @pottsydeep 8 лет назад

    What a beautiful piece of walnut art!
    I may have to go back to my walnut stash. Mostly, I'm allergic to walnut so I leave it alone, but it is beautiful and finishes so well.
    As always I appreciated your instruction on how to get the most beauty from a turning.

    • @Lyle
      @Lyle  8 лет назад

      +William Potts Nice to hear from you again. I need to be careful with walnut too, I can get a skin reaction.

  • @geofo60
    @geofo60 8 лет назад

    I really enjoyed the series following each stage Lyle. The up close shots showing & explaining use of the bevel were excellent. It was a privilege watching & learning from a Master of his craft. Thank you for sharing & giving your time. As a 'greenhorn' turner I learned a lot.
    Regards ......... Geof (UK)

    • @Lyle
      @Lyle  8 лет назад

      Thanks Geof, Keep learning, its a fun ride.

  • @marknienstadt6963
    @marknienstadt6963 8 лет назад

    Great Demo. I have two rosewood pieces I have been saving for just such a project. Looking forward to making saw dust.

    • @Lyle
      @Lyle  8 лет назад +1

      +Mark Nienstadt Thanks Mark, Make shavings instead of sawdust, its easier.

  • @SeeWhyMan
    @SeeWhyMan 8 лет назад

    Another awesome job! Thank you for the great lessons!

    • @Lyle
      @Lyle  8 лет назад

      +Curtis Wyman Thanks for writing Curtis

  • @anklebiterwoodworks2818
    @anklebiterwoodworks2818 8 лет назад

    Nice figure. Certainly was a lot of effort for that one! Thanks for sharing.

    • @Lyle
      @Lyle  8 лет назад +1

      +AnkleBiter Woodworks Thanks for writing, There really was not much effort doing this bowl, no harder then any other bowl. I use this method for everything. It would take me less than an hour to do start to finish. The hard part was doing the shoot and editing to get you the info that is important to show.

    • @anklebiterwoodworks2818
      @anklebiterwoodworks2818 8 лет назад

      +Lyle Jamieson I can certainly agree with the filming part extending the amount of time for everything. Was surprised myself when I started doing my own. Certainly enjoy those who take the time and effort to share. All of you have been what has kept my going during these 6 months I have been too ill to be in shop.

  • @acolyteturner
    @acolyteturner 8 лет назад

    It's always great to watch your turning methods Lyle, but it would be beneficial to see your finishing too...
    Cheers
    Tom

    • @Lyle
      @Lyle  8 лет назад

      +Tom Stratton Thanks Tom, I will put it on the list for future clips. In my opinion the finishing was done in the video. It is the tool control that starts the ability to put a good finish on it. No torn out grain or tool marks that needs excessive sanding and sanding with sharp sandpaper is all it takes and any finish will look great.

  • @MikeWaldt
    @MikeWaldt 8 лет назад

    A great series Lyle, and an absolutely superb piece at the end. Always such a pleasure to watch and learn from a master of his craft.
    Take care my friend
    Mike

    • @Lyle
      @Lyle  8 лет назад

      +Mike Waldt Thanks for the kind words. I am just trying to keep up with Mike. LOL

  • @paulhaggett8913
    @paulhaggett8913 8 лет назад

    Thanks for taking the trouble to answer Lyle.
    I remember watching you demonstrate the wood cut jig.
    I tend to grind free hand (Stuart Batty 40.40 grind) just for quickness, but I will try the Swept back grind again.
    I am a school teacher in England (woodwork) and often show the older students your videos ( they can't write 'Lyle' in the shavings that fly from the lathe, but have tried!)- so thank you once again, they are excellent.
    Finally, don't reply- but I want you to know your work has enriched our lives over the pond!
    All the best mate
    Paul

    • @Lyle
      @Lyle  8 лет назад

      +Paul Haggett Hi Paul,
      SB grind will do a lot of things well but my grind is much more versatile. Even the 40-40 grind will work and save the tool life using a jig.

  • @sapphodesigns2377
    @sapphodesigns2377 7 лет назад

    Thank you for teaching in such detail.

    • @Lyle
      @Lyle  7 лет назад

      Hi Fifi, thanks for writing, enjoy.

  • @yuvallahav
    @yuvallahav 8 лет назад

    Beautifully done and masterfully explained, thank you for sharing this beautiful bowl!
    Yuval.

    • @Lyle
      @Lyle  8 лет назад

      +Yuval Lahav Woodturning Thanks Yuval, It was a fun project, I am pleased with it too.

  • @gordroberts53
    @gordroberts53 8 лет назад

    Tremendous series Lyle. The focus on planning was especially helpful and will help me move from let's see what happens to a more deliberate exploitation of the wood. Cheers, Gord

    • @Lyle
      @Lyle  8 лет назад

      +Gord Roberts Thanks Gord, nice to hear from you.

  • @CarlJacobson
    @CarlJacobson 8 лет назад +1

    Fantastic piece Lyle, I really enjoyed this series.

    • @Lyle
      @Lyle  8 лет назад +1

      +Carl Jacobson Thanks Carl, Nice to hear from the RUclips master. Your pocket watch was a great project. I am even getting notice from your Q&A channel now, go figure??

  • @Tim_Pollock
    @Tim_Pollock 8 лет назад

    The close up views in your videos are always awesome but especially on this one, with the air gap seeing the close up was very neat to watch.

    • @Lyle
      @Lyle  8 лет назад +1

      Thanks Tim, Yes, I will use this video to help me teach the push cut, it will be a classic I will use for years to come.

  • @TheSafecrkr1
    @TheSafecrkr1 8 лет назад

    Lyie, that was the best explanation of how "ABC" works and that visual explanation with the tool against the wood was perfect. The bowl turned out beautiful.
    I always thought that when part of the bark flies off the bowl is firewood. Thanks again for a fine video. Jim

    • @Lyle
      @Lyle  8 лет назад

      +jim renderer Thanks for the feedback Jim, This was a time when I could have left the bark on. I had a hard time getting it off. But I like the effect when removed.

    • @MakeCrazydays
      @MakeCrazydays 8 лет назад

      +jim renderer - Agreed. Those were some great shots through the wood and close ups from the other angle.

    • @Lyle
      @Lyle  8 лет назад

      +Make Crazydays Thanks Mike

    • @MakeCrazydays
      @MakeCrazydays 8 лет назад

      *cough* Make, and actually Aaron. :-)

    • @Lyle
      @Lyle  8 лет назад +1

      +Make Crazydays OOPS!! I cant read, Sorry Aaron, with a funny handle.

  • @muziqjazz
    @muziqjazz 8 лет назад

    Thanks for sharing M. Lyle. I appreciate all the infos. Marc

    • @Lyle
      @Lyle  8 лет назад

      Thanks for writhing Marc, enjoy.

  • @buzzgreen20
    @buzzgreen20 8 лет назад

    great series, very helpful, thanks!

    • @Lyle
      @Lyle  8 лет назад

      Thanks for the feedback Bill

  • @viktordunai2936
    @viktordunai2936 7 лет назад +1

    Best instructional videos bar none .

    • @Lyle
      @Lyle  7 лет назад

      Thanks Viktor

  • @rexb6478
    @rexb6478 8 лет назад

    Thank you for your you tube videos! I had the opportunity to see you at the Florida symposium and it was excellent. This video series is great! Loved the details, and explanation of each step; I'm trying to do this now with maple and have watched this series over and over to digest it.

    • @Lyle
      @Lyle  8 лет назад

      Thanks for the note Rex, Glad to be of some help. May I suggest you get a copy of my Bowl Basics DVD. 4+ hours of instruction. The RUclips videos only show parts of the picture. My DVD shows the entire process start to finish.

  • @colinchalmers1099
    @colinchalmers1099 8 лет назад

    Nice one Lyle,
    cheers Colin.

    • @Lyle
      @Lyle  8 лет назад

      +Colin Chalmers Thanks Colin

  • @ChurchClown7
    @ChurchClown7 8 лет назад

    Thanks. I learned a lot from this video.

    • @Lyle
      @Lyle  8 лет назад +1

      Great, Thanks for writing

  • @DanielVilarino
    @DanielVilarino 8 лет назад

    Hi Lyle! Very nice instructional video my friend! And a beautiful bowl! I enjoyed the series a lot! Cheers! Daniel

    • @Lyle
      @Lyle  8 лет назад

      +Daniel Vilarino Thanks Dan, nice to hear from you.

  • @kevinellis9150
    @kevinellis9150 8 лет назад

    Nice Job!!

    • @Lyle
      @Lyle  8 лет назад

      +Kevin Ellis Thanks Kevin

  • @jprice608
    @jprice608 7 лет назад

    Very good demo, as I was watching the demo Jean could not see it but she said I know who that is on the computer.
    Thanks Jean and Joe

    • @Lyle
      @Lyle  7 лет назад

      Hi Joe, Thanks for writing. I am trying not to travel so much. Don't know when I will be back in your area. Keep in touch.

    • @jprice608
      @jprice608 7 лет назад

      I just one of your handles and bowl gouge from Thompson and I am enjoying turning with it.

  • @pointer2null
    @pointer2null 7 лет назад

    Brilliant triplet of videos.

    • @Lyle
      @Lyle  7 лет назад

      Hi Point, Brilliant, hummm, dont remember being called that before, thanks, you make my day.

  • @clydeulmer4484
    @clydeulmer4484 8 лет назад

    Great project for illustrating techniques -- and a beautiful outcome. Your explanation of iterative refinement of blank positioning to get the best balance of shape, grain pattern, and maximum use of material is the best I've come across. I fear, though, that starting with 4 x 10 blanks and ending up with 2 x 6 bowls may be in my future :-) Clyde

    • @Lyle
      @Lyle  8 лет назад

      +Clyde Ulmer Hi Clide, I have said many times "This stuff grows on trees". It only hurts a little while when you waste off some wood. Go for the best not the biggest.

  • @markchoitz443
    @markchoitz443 6 лет назад

    brushed up on this technique as I have a couple pieces of crotch mimosa to try out making a heart. Hope you're well Lyle - and hope you can make it to the Oregon Woodturning Symposium again sometime, sure enjoyed your talks and demos at the 2015 show.

    • @Lyle
      @Lyle  6 лет назад

      Thanks for writing, I will be at AAW in Portland this year. come by to say Hi.

  • @joescarborough1
    @joescarborough1 8 лет назад

    Very nice., Lyle . . as expected. You said in an earlier reply you had a hard time getting the bark off. I'm guessing you tooled it off and refined with abrasives and I am also guessing you didn't use a potato peeler. Could you elaborate briefly? Or point me to a video where you explain your approach?
    Thanks for the lessons,
    --Joe

    • @Lyle
      @Lyle  8 лет назад +1

      +Joseph Scarborough Thanks for writing Joe, The edge treatment is important on all vessels not just natural edge bowls. I will do a RUclips segment on it. Usually the bark just pulls off once you get the wall thickness down, sometimes all in one piece. This one was not coming off. I had to take a pair of pliers and break off some big chunks piece by piece. That left some jagged bark left on the rim I had to gently sand off with mostly drum sanders. I was careful not to dig into the wood wall. After all the bark was gone I re-shaped the edge to remove the sharp edges and round over the corners a bit and make it look consistent all the way around the rim.

  • @андрейбуря-ц2ю
    @андрейбуря-ц2ю 5 лет назад

    просто молодца

  • @ricchavens5858
    @ricchavens5858 8 лет назад

    Enjoyed the videos on this heart bowl! What did you use for a finish?

    • @Lyle
      @Lyle  8 лет назад

      +Ricc Havens Hi Ricc, I use Watco Danish oil, wiped off, to protect the wood, and buff it with hard carnauba wax. My work is usually non-functional and just for display. The trick to finishing is preparing the wood with good tool control and sharp sandpaper. After that any finish will work great.

    • @ricchavens5858
      @ricchavens5858 8 лет назад

      +Lyle Jamieson - THANKS!!!

  • @paulhaggett8913
    @paulhaggett8913 8 лет назад

    Love your work Lyle, your demonstrations are inspirational, thank you. (as are MikeW). Just wondered, are you tempted to grind freehand?

    • @Lyle
      @Lyle  8 лет назад

      +Paul Haggett Thanks Paul, When I started there were no jigs so I learned from David Ellsworth how to sharpen by hand. The grind I use is difficult to do by hand. I can still do it, but only when I dont have a jig available when Im traveling. That is pretty rare these days. The jig lets me use a very light touch on the grinder because it is the same angle set up as the previous sharpening. Repeat-ability means I save my tool life and grind off less metal compared to hand sharpening, even if you can get good at it The jig saves both time and money..

  • @военныйнапенсии
    @военныйнапенсии 8 лет назад

    what a tree and what kind of oil do you use? Thank you

    • @Lyle
      @Lyle  8 лет назад

      Thanks for writing, I use Watco danish oil. Any wiping varnish would do the same thing. I wipe it off while it is wet so I do not have to deal with build up or "finishing the finish". The shine comes from buffing with hard carnauba wax.

  • @stnmario
    @stnmario 8 лет назад

    geil

    • @Lyle
      @Lyle  8 лет назад

      +Mario bt1100 Danke, Mario, No, Sorry I do not speak German. I will take "giel" as sexy, cool, or very well done, Thanks

    • @paralogia
      @paralogia 8 лет назад

      Translates as Horny. Go figure.