Another excellent Finnegan production. Great to be out chopping grass when the weather is good. Well done Cathal for making Paul and the team look good, a great achievement 😂 Keep on keeping on
Ah the days of long draws in a 6195R and a tri axle in tow on some of Meath’s quality back roads 🙄 and the odd gobshite of a car driver like a rabbit in headlights!! A change of scenery from the office job and great banter. Cracking video lads. 🚜💨
Great silage video I just want to say about your tedding the grass we were told and have had good results by never lifting the Tedder while turning at the headlands gives less lumps.Every time you lift and drop you create light and heavy spots in the crop. We had been using 6 and 8 rotor krone till last year and now we use a 12 meter Fendt which is just the natural replacement of the lely I took a video of the 2 makes working together the lely style hooked tyne certainly throws it higher in the air
@@finnegansfarm9137I wouldn’t want to name a make you shouldn’t buy even if the same company makes excellent other grass machinery but on past experience krone is the best for reliability. The 8 rotor is very little more expensive than a 6 covering only slightly more width because the 8 has smaller rotors and it’s transport width is less than a 4 or 6 rotor. The 8 rotor is a good match for spreading three 10 foot swards Our Fendt preformed well with the hook tyne which is the same as a Massey or your Lely. The smaller Fendt/Massey tedders are really a Fella rake which I don’t know much about. I am also hearing good things about the Malone tedders. Last year the krone and Fendt in the same field travelling slowly covered an acre a minute
Fantastic video guys!! Bit of everything going on!! AND some juicey gossip on a Fastrac going to Farmer Phil 👏🏻👌🏻 just 1 question : did Paul help with pit….. in my experience of silage and Pits…. it’s rare the harvester man lifts a finger outside his cab 🤔😜😜
Great video from " The F Team 👌 " really miss these draws alongside the Harvester🚜🚜 Don't think Cathal would make a good Teacher ....🤭 poor Fiona was traumatised....or was it Cathal...🤔😂
Great video guys! Just a question on the tedder, is there a reason the guards are on the back as they are normally fitted on the front to stop you hitting a pole?
You haven't lived until you've buckraked silage with a Massey 135. You get off at night with a dead clutch leg 😁😁😁😁👍👍
That’s for sure Gerard no gym required!
@@finnegansfarm9137 been there done that with MF 188 worse again with a huge high clutch pedal, my left knee is bone on bone 40 years later 😑
@@gerryoconnor8751 been there ,done that and with cranky Diff lock ,
1:13 Absolutely stunning screenshot from the drone footage. Excellently produced video overall.
Some nice views alright Dell
Best of luck with the silage you can't beat the home of a harvester 🙏🇮🇪
She’s humming nicely Myles
Another excellent Finnegan production.
Great to be out chopping grass when the weather is good.
Well done Cathal for making Paul and the team look good, a great achievement 😂
Keep on keeping on
These boys always look good Pat 😂😂
Savage video lads - really enjoyed watching it. No matter what’s you go at it’s done right. Roll on workshop Wednesday👍👍
Cheers lad 👍
One of the best videos you have done, a great team effort, love the grass season, the jag was running sweet
Cheers Gearoid she’s flying 👍
Well done guys great video as always love the drone work. And that intro of all machines starting 👌👌. Looking forward to the next one.
Cheers lad keep watching
Great video boys love the crack between all the lads makes the day shorter
Great bunch of lads Seamus 👍🚜
Ah the days of long draws in a 6195R and a tri axle in tow on some of Meath’s quality back roads 🙄 and the odd gobshite of a car driver like a rabbit in headlights!! A change of scenery from the office job and great banter. Cracking video lads. 🚜💨
Cheers David stay with the office job👍🚜
@@finnegansfarm9137 machinery is like a drug! Can never stay away from it! 😉😂
Great video Cathal thank you
Cheers Donal 👍
Great video again lads great team work. Love the green machines
Thanks Declan can’t beat the silage season 👍
Another great video lads, I’m a big fan of all the work you do. 👏🏻
Glad you enjoy the videos Keith 👍
Great bunch of lads 👍🏻
Brilliant video as always keep up the good work 👏 🚜🇮🇪
Keep watching Ant👍
Great video lads I use to push up 3000 acres of silage and 500 of maize by jaysus I dont miss it
That’s a lot of grass and maize, no wonder you don’t miss it 😢
Greetings from Cork. I agree. Probably your best video yet. Dacent, like!
Cheers Micheal from Cork👍
Extra storage for bales and beats dirty tyres or even the sand bags.
Anything but them tyres Robert 🥱
Nice to see a kerry jersey out and about 💪👍🌾🐄
Great video silage is good fun
Cheers Nialll 👍
Top banter👍🤣
Great video, good to see you all get on well, happy crew well done guys.
Cheers Hugh 👍
Say you have some craic with John B. Loved his explanation of the rake, its a rake. Typical John B. 👌
Great silage video I just want to say about your tedding the grass we were told and have had good results by never lifting the Tedder while turning at the headlands gives less lumps.Every time you lift and drop you create light and heavy spots in the crop. We had been using 6 and 8 rotor krone till last year and now we use a 12 meter Fendt which is just the natural replacement of the lely I took a video of the 2 makes working together the lely style hooked tyne certainly throws it higher in the air
We will probably change the lely next year what would you go for ?
@@finnegansfarm9137I wouldn’t want to name a make you shouldn’t buy even if the same company makes excellent other grass machinery but on past experience krone is the best for reliability. The 8 rotor is very little more expensive than a 6 covering only slightly more width because the 8 has smaller rotors and it’s transport width is less than a 4 or 6 rotor. The 8 rotor is a good match for spreading three 10 foot swards Our Fendt preformed well with the hook tyne which is the same as a Massey or your Lely. The smaller Fendt/Massey tedders are really a Fella rake which I don’t know much about. I am also hearing good things about the Malone tedders. Last year the krone and Fendt in the same field travelling slowly covered an acre a minute
@@finnegansfarm9137 if you want to see the fendt Tedder in Irish conditions watch Aiden Wickam silage 2022 on utube
Fantastic video guys!! Bit of everything going on!! AND some juicey gossip on a Fastrac going to Farmer Phil 👏🏻👌🏻 just 1 question : did Paul help with pit….. in my experience of silage and Pits…. it’s rare the harvester man lifts a finger outside his cab 🤔😜😜
I don’t think any Harvester man helps with the pit it’s one of the perks of the job 🤔🤔
We need to see more of Grandad, John B 🤣🤣🤣🤣🤣🤣🤣
We see enough of him Gerry 😂😂
Class video again guy's and ladies🤕 ☘☘😀😀🚜
Cheers Sean 👍
Another great video Keep em coming 👍🏻
Will do Keith 👍
Great Video again lads👍
Thanks paul
Lovely looking grass , should be top quality, 75DMD, hopefully. Lucky got it before weather broke. I'm still waiting to get a couple of fine days 🙃.
Hard to get them few days Gerry
Great video lads 👌
Well Cathal, can I ask drone you use. Iam using the DJI mini poverty model! It gives a good bit of bother connecting with the iPhone.
John B pressure NO 🤣, legend
John doesn’t do pressure Donal you can tell from videos 😂
@@finnegansfarm9137 he's unreal Cathal serious man rowing in the grass
Great video from " The F Team 👌 " really miss these draws alongside the Harvester🚜🚜
Don't think Cathal would make a good Teacher ....🤭 poor Fiona was traumatised....or was it Cathal...🤔😂
I think good pupil but bad teacher Michael alright poor Fiona is actually Phoebe 😂😂
Great video as always. Would you not put Marco on the pit with the loader 🙈🙊🤠
He’d knock the place Brendan 😂😂
Hi Mr finnegan it's lisa
Miss it I do
Good job lads
Thanks Brian 👍
Ye must have a fair owd wages every week 😲 smashed the grass anyways 👌☀️
Good men are worth it Andrew 👍
So we'll ur passing lads out with half loads JCB driver!!!
On the way to next field John 👍
He seems to be driving to far ahead of the 860, makes it very hard to fill the front of the trailer
Great video guys! Just a question on the tedder, is there a reason the guards are on the back as they are normally fitted on the front to stop you hitting a pole?
That’s the way it came Aidan !
Get a rounded mirror for the side of the harvester so the trailer men can see into the trailer
Good idea Ray would be a big help👍
There`s only one way to do it, and that`s " The Finnegan Way"
Good man Tom 👍
One comment starting a tractor and reving it up not good Fast tick over better until oil gets round journals etc
Tractors had already been warmed up it was just for special effect for video Bob but glad you noticed 👍
Is this a son of the fella who owns the farm?
Yep
Reving. When you start tractor not good
Great video lads 👌