Hello, friends! Our channel already has a membership. In this community of RS TEAM FRIENDS, We will pay special attention, and only respond to comments and questions from our channel members!
@@Kjwcube135 you can change all of the bulbs without removing the bumper, the key to success is some practice. But the turn signal bulbs socket can be a little tricky (hard to un/lock).
It is definitely a wrong application !!!! You can replace it with a little dexterity by removing the cover behind the headlight. I always changed it this way.
I broke the bottom retaining clip while changing my bulb on one side, and now the clip swings about. So I put the cover on with the top clip in place and used duck tape to hold the bottom end of the cover in place. Will that be ok?
От скоро съм собственик на Сеат Леон 2007 1p. Имам следния въпрос ако някой знае как да помогне. Въпроса е следния как се прибират страничните огледала , нямам опцията за прибиране от копчето за регулиране на огледалата от купето, пробвах и като заключвам с ключа да задържа за няколко секунди и пак не стана. Пробвах и ръчно да ги прибера, но се притеснявам да не натисна много да не ги счупя. Ако някой знае как да помогне ще съм много благодарен.
Démonter le pare-choc pour changer des ampoules de phares ? ça ne va pas bien dans votre tête ! Ce n'est pas une Peugeot ou autre poubelle française, on parle d'une Seat! Basculez les agrafes du couvercle, débrancher le culot de l'ampoule, pincer l'agrafe de maintien de l'ampoule pour la retirer. Pour remonter la nouvelle ampoule, il faut commencer à bien la loger, mettre l'agrafe en commençant par le bas et ensuite, la clipser" par le haut puis rebrancher l'ampoule. Moins de cinq minutes ! Disassembling the bumper to change headlight bulbs? It's not going well in your head! It's not a Peugeot or any other French garbage can, we're talking about a Seat! Flip the staples from the cover, unplug the bulb base, pinch the bulb holding clip to remove it. To reassemble the new bulb, you have to start to fit it well, put the clip on starting at the bottom and then clip it from the top and then plug the bulb back in. Less than five minutes!
Hello, friends! Our channel already has a membership. In this community of RS TEAM FRIENDS, We will pay special attention, and only respond to comments and questions from our channel members!
all of this, to replace the headlight bulbs, dam so much work
You can replace the main low beam without removing the bumper just open the clips.
@@Kjwcube135 you can change all of the bulbs without removing the bumper, the key to success is some practice. But the turn signal bulbs socket can be a little tricky (hard to un/lock).
It is definitely a wrong application !!!! You can replace it with a little dexterity by removing the cover behind the headlight. I always changed it this way.
Yes, i thought I replaced it last time by using a hand to the rear of the headlight as @ferdikarakule says, without removing everything
Yo cambio las bombillas sin desmontarla defensa, lo veo una tontería hacer eso si dijeras k vas a poner otros faros
Y los dos tornillos detrás de la calandra central? De hecho son los más dificiles.
Thanks too much 👌👌👌
I broke the bottom retaining clip while changing my bulb on one side, and now the clip swings about. So I put the cover on with the top clip in place and used duck tape to hold the bottom end of the cover in place. Will that be ok?
Yeah it'll be fine.
От скоро съм собственик на Сеат Леон 2007 1p. Имам следния въпрос ако някой знае как да помогне. Въпроса е следния как се прибират страничните огледала , нямам опцията за прибиране от копчето за регулиране на огледалата от купето, пробвах и като заключвам с ключа да задържа за няколко секунди и пак не стана. Пробвах и ръчно да ги прибера, но се притеснявам да не натисна много да не ги счупя. Ако някой знае как да помогне ще съм много благодарен.
A resotke okolo nomera v kazdoj starane escho bolti😢
Tout démonter pour changer une ampoule 🤦
Démonter le pare-choc pour changer des ampoules de phares ? ça ne va pas bien dans votre tête ! Ce n'est pas une Peugeot ou autre poubelle française, on parle d'une Seat! Basculez les agrafes du couvercle, débrancher le culot de l'ampoule, pincer l'agrafe de maintien de l'ampoule pour la retirer. Pour remonter la nouvelle ampoule, il faut commencer à bien la loger, mettre l'agrafe en commençant par le bas et ensuite, la clipser" par le haut puis rebrancher l'ampoule. Moins de cinq minutes ! Disassembling the bumper to change headlight bulbs? It's not going well in your head! It's not a Peugeot or any other French garbage can, we're talking about a Seat! Flip the staples from the cover, unplug the bulb base, pinch the bulb holding clip to remove it. To reassemble the new bulb, you have to start to fit it well, put the clip on starting at the bottom and then clip it from the top and then plug the bulb back in. Less than five minutes!
Totalno idiotska konstrukcija
і не кажіть.