Guyker Locking Tuners Install

Поделиться
HTML-код
  • Опубликовано: 19 дек 2024

Комментарии • 9

  • @Guyker
    @Guyker Месяц назад

    Thanks for sharing!

  • @garyjohnson791
    @garyjohnson791 Месяц назад

    I filed down the little spikes on back of the tuning pegs for a flush installation.

    • @maraudermusic2714
      @maraudermusic2714  Месяц назад

      that will help, just realize that spike along with the screw helps the tuner not spin in the hole under string tension. The screw should be enough though you would think. Thanks for your comment and I hope the tuners work out well for you.

  • @w0oke
    @w0oke 18 дней назад

    Hi. Gear Ratio 1:18 or 1:21? On the official Guyker website these tuners have 1:21, but on Aliexpress it is 1:18. This can be checked by counting the number of teeth on the gear. For gear ratio 1:18 there will be 18, and for gear ratio 1:21 there will be 21

    • @maraudermusic2714
      @maraudermusic2714  17 дней назад

      Please reach out to Guyker directly at support@guyker.com and ask for clarification. They have been great and very responsive. Thanks for watching.

  • @evelioramirez6763
    @evelioramirez6763 7 месяцев назад

    did they come with the grease or you have to get any grease to lube the gears?
    also you video is greatly appreciated as i just bought them in chrome and wanted to see how they looked thanks

    • @maraudermusic2714
      @maraudermusic2714  7 месяцев назад +1

      They are sealed and I assume pre-greased. They seem comparable to what is on the LTD guitar I have. Time will tell. They are better tuners than what came on the guitar, have smoother operation, and the locking feature helps remove excess string wraps and makes string change easier. Thanks for stopping by!

  • @ryanmcgregor4918
    @ryanmcgregor4918 10 дней назад

    You're using locking tuners the wrong way. The point is to eliminate the need to wind the string around the post with the addition of the clamp.