I got a Lexmark x950de. It’s based off a similar xerox printer. Same toners same drums everyone is the same except the enclosure and the screen part. It seems that the Lexmark’s are lot faster at booting up from a cold boot. Around 1 minute or less for me. Although they are legit based off these Xerox’s
Interesting observation. Last I knew Lexmark seemed to use a lot of Dell/Samsung base equipment for their small office laser printers. Interesting to know they are using Xerox stuff for the large photocopier stuff.
@@freenameYeah but they seem to be more reliable for some reason except those drums. I had a bad experience with OEM drums that got scratched some how and got discolored causing little dots on the paper. Aliexpress aftermarket Xerox drums seem to do a better job with prints and reliability.
This is about normal... maybe a little slow. However, upgrading software to newest release would be a good idea. I would first clone the settings using Centre ware Internet Services before doing so. Navigate to CWIS typing the printer IP into a networked computers browser to access, then clone.
4 minutes.. Man that's not a machine to turn it on to print 2 pages for school... It's normally used to print all day long and let it in sleep mode rest of the time
I have a 7835 and it does not start. shows the home screen and after about 20 seconds all the screen goes off and continues on the home screen ... could someone help me
Biswanath Mahala Most likely a sensor /actuator is stuck or a scrap of paper that was left after a jam removal is covering a sensor. On screen instructions for jam clearance may guide you to the right area.
Just very, very frustrated with the copier. I would not recommend. This video is here to show other potential buyers just how long it takes to start up.
icannotgetafreename the new c8000 series boots up in half the time. Other than boot up time it's a real cool piece of kit. My recommendation is not to turn it off and just let it sleep.
I got a Lexmark x950de. It’s based off a similar xerox printer. Same toners same drums everyone is the same except the enclosure and the screen part. It seems that the Lexmark’s are lot faster at booting up from a cold boot. Around 1 minute or less for me. Although they are legit based off these Xerox’s
Interesting observation. Last I knew Lexmark seemed to use a lot of Dell/Samsung base equipment for their small office laser printers. Interesting to know they are using Xerox stuff for the large photocopier stuff.
@@freenameYeah but they seem to be more reliable for some reason except those drums. I had a bad experience with OEM drums that got scratched some how and got discolored causing little dots on the paper. Aliexpress aftermarket Xerox drums seem to do a better job with prints and reliability.
This is about normal... maybe a little slow. However, upgrading software to newest release would be a good idea. I would first clone the settings using Centre ware Internet Services before doing so. Navigate to CWIS typing the printer IP into a networked computers browser to access, then clone.
I have you beat. I starting booting a Xerox Color 550 10 minutes before I played your video and it's still booting!
Xerox 5865 not savo job opshin
4 minutes.. Man that's not a machine to turn it on to print 2 pages for school... It's normally used to print all day long and let it in sleep mode rest of the time
Yes.. It's usually on all day long but it goes wrong so often it's beyond inconvenient when it needs power cycling.
My xerox printer is displayin SYSTEM EROR. pls wot kind i do?
New firmware cuts down the time to a much more reasonable 2.5 minutes
my Xerox WorkCentre 7535 error lose machine ID speed I need nvm file 7535
I have a 7835 and it does not start. shows the home screen and after about 20 seconds all the screen goes off and continues on the home screen ... could someone help me
Leucio José Batista
May need a software reload and /or new board/hard drive. You would need to place a service call likely.
Take a sim card from a working maching of d same model. Insert it and then restart it. I hope it solve d problem.
my 7435 cannot boot.. after power up it loading upto 3 of 6... then the machine not responding.. please help
They are awful machines. I think Xerox are the only people who can help you here. Probably needs a new hard disk.
xerox work centre 5775 paper not jam but display shows that paper jam.can any one help me?
Biswanath Mahala
Most likely a sensor /actuator is stuck or a scrap of paper that was left after a jam removal is covering a sensor. On screen instructions for jam clearance may guide you to the right area.
How bored do you have to be to video this?
Just very, very frustrated with the copier. I would not recommend. This video is here to show other potential buyers just how long it takes to start up.
icannotgetafreename the new c8000 series boots up in half the time. Other than boot up time it's a real cool piece of kit. My recommendation is not to turn it off and just let it sleep.