I’ve spent a year dialing in my system. I’ve got the .75 and 4 x 20” doubles. This clip plus the hanger that goes on the stand is a must have. It really makes my system efficient. Take the bolt out, remove the sticks from the stand, hang them from the stand and you’re climbing.
Love it man! That is a hard to beat system for sure. I'm a smaller frame guy and love packing my sticks up the tree with the treestand versa hangers and the stick mule systems. Thanks for sharing!
@@genesis3dprinting just ordered another versa hanger for the right side in case I ever need to hang them off of that side instead. Also ordered a 3-stick Stick mule as well. I don’t always carry all 4. I’ve been using your stuff for a few years now. It’s always been great and makes for an efficient set up.
Have you seen our LXCG stick tamers? They should help you mount you doubles to the platform easily! genesis3dprinting.com/products/lwcg-stick-tamers?_pos=1&_sid=14a2e4a00&_ss=r
I've tried this, but the part isn't strong enough to handle the cam motion from the bolt. I've played around with tappign the one side of the clip and that looks very promising!
Where did you get that versa hanger that's attached to your belt and where did you get the cam locking system that's attaching your sticks together to the stand?
@@genesis3dprinting they’re heavy, cut mine down and made them 2 steps (the locking and the top ). I run and gun with 4 sticks and I’m over it. Pretty sure they are the same as lone wolf dimensions wise, they just stack different. The idea is excellent, just terrible execution. Some “noise free” tight stack solution would be epic.
You can use an 8d nail to fix the sheared off pin on your XOP locking mechanism. I had a few that broke and it works perfect drive out the old broken pin insert the nail cut off and file smooth.
I’ve spent a year dialing in my system. I’ve got the .75 and 4 x 20” doubles. This clip plus the hanger that goes on the stand is a must have. It really makes my system efficient. Take the bolt out, remove the sticks from the stand, hang them from the stand and you’re climbing.
Love it man! That is a hard to beat system for sure. I'm a smaller frame guy and love packing my sticks up the tree with the treestand versa hangers and the stick mule systems. Thanks for sharing!
@@genesis3dprinting just ordered another versa hanger for the right side in case I ever need to hang them off of that side instead. Also ordered a 3-stick Stick mule as well. I don’t always carry all 4. I’ve been using your stuff for a few years now. It’s always been great and makes for an efficient set up.
Product looks great! Nice ingenuity.
Thanks so much man! We appreciate the kind words.
This is a really slick set up. It makes me want to buy a .5.
Ohhh boy! Saddle Hunting RUclips channel is going to get a treestand. Is that allowed haha
Love the constant innovation brotha! Keep it coming!
Thanks man! We will continue to grind out some more designs 🤙
Dude so glad I bought a bunch of stuff from you. Can’t wait till it gets here.
Great idea. Where do i get one make the nut a wing nut
Well you can always replace the exsisting nut with a wing nut. It's a simples 1/4"-20 bolt.
Can you make something to hook up the 17" sticks to the ambush platform??? When I mount them the bottom bolts dig into my lower back. Lol
Have you seen our LXCG stick tamers? They should help you mount you doubles to the platform easily!
genesis3dprinting.com/products/lwcg-stick-tamers?_pos=1&_sid=14a2e4a00&_ss=r
You should make it so the nut stays attached to the clip so it will be impossible to lose
I've tried this, but the part isn't strong enough to handle the cam motion from the bolt. I've played around with tappign the one side of the clip and that looks very promising!
Where did you get that versa hanger that's attached to your belt and where did you get the cam locking system that's attaching your sticks together to the stand?
Right on our webiste! genesis3dprinting.com/collections/climbing-stick-products/products/lwcg-doubles-stick-mule-clip
Thats a great design. I will have to get a couple of those. When do you think the 4 stick model will be available?
Design is done for the 4 sticks. Just starting to print off stock for these.
PLEASE MAKE SOMETHING FOR XOP STICKS. Absolutely hate the locking mech they come with, I have two that are sheared and don’t work worth a shit! Help!!
😂 I need to get some XOPs to get a better idea what those sticks are all about.
@@genesis3dprinting they’re heavy, cut mine down and made them 2 steps (the locking and the top ). I run and gun with 4 sticks and I’m over it. Pretty sure they are the same as lone wolf dimensions wise, they just stack different. The idea is excellent, just terrible execution. Some “noise free” tight stack solution would be epic.
You can use an 8d nail to fix the sheared off pin on your XOP locking mechanism. I had a few that broke and it works perfect drive out the old broken pin insert the nail cut off and file smooth.
@@jlo5793 solid hook up thanks for that!
I would 100% drop that and it would sink to the bottom of 12" of fluffy snow and I'd never find it again.
Make sure you put your website address in your description man, get all the traffic you can.
That’s a good idea man!
What’s the website to get that
Genesis3dprinting.com
Do you ever consider selling the files for those of us who have printers?
As of right now I haven’t because I haven’t thought of a good way to control distribution of the files in a controlled manner