Beautiful shop. Always envious of ppl who find killer deals on machines. I’ve not been lucky in that sense. I really appreciate the fact that you didn’t pull out every drawer and show every tool and misc stuff. That personally drives me nuts. I’m working towards doing my first RUclips myself soon. I only have a hobby shop however it’s metal and wood. Emphasis on metal. I’ve gotten a few pointers from watching this. Great job young man 👍🏼👍🏼
Thanks for the kind words and watching! I have lots planned for this channel and definitely looking to produce higher quality videos than this. I’ve been lucky for sure for good deals! Actually have a new addition already since filming! Good luck with your channel!
Great layout!! Also the deals on marketplace that your able to find are insane!! Everything in my shop is new because of lack of marketplace woodworking tools in my area. $400 for that Oneida is just comical 😂
Thanks! And I have been lucky and patient enough for sure! Back when I needed basically all my tools I pretty much lived on Facebook marketplace refreshing the page all the time. 😂
Great tour. I’m envious of your shop’s neatness and organization. I have to say you have been fortunate with your Marketplace finds. Especially envious of your 12” planer! You must live in a less expensive area of the country. Best of luck making furniture!
Thanks! I’ve worked hard to keep the shop organized. And I most certainly have been lucky! I’m located in Maine and it’s normally very pricy. I’ve been looking to upgrade my dust collector for 3 years and waited out till I found that deal! Patience is key! Thanks for watching and the comment!
Thank you! Definitely thought workflow first and keeping it simple and easy to move around in was pretty important. I Definitely will grow into it with more tools eventually I’m sure, but as of now it works well!
Great workshop, awsome kit and well organised. I note you don't have a spindle moulder, obviously you manage with the router table. I'm looking forward to watching your projects.
Thanks! I did have a spindle moulder for a little bit, but it did just seem too large for what I needed. I get away with routers and the router table. 👍
Great tour! I love the amount of space you have. Also, i dont know if you noticed the darker bands that run across your screen. But if you up your shutter speed to 120 it’ll cancel it out. I’m assuming you have LED lights in your shop, that’s what would cause it.
Thank you! I noticed all that after the fact and unfortunately did not want to re shoot the whole video. 🙄 I appreciate the info! I normally am shooting off a dedicated light so this was my first time shooting off my leds for a longer video.
Next upgrade - more light. My shop has a lot of deficiencies also so this is not meant as a great hit now. But this will bring back the most viewers in the future.
Loved your tour! However, lighting is terrible! That's meant to be a constructive complaint! Keep up the good work. Looking forward to enjoying your other videos.
Yes I’m so bothered by it myself. 😭 I’m thinking of remaking the whole thing because it’s so bad (at the time I didn’t want to re-film anything). It’s in none of my other videos, just botched it for this one. 🤷 Thanks for the constructive criticism and the comment!
Nice shop. Glad you shared your story of progression as it’s tempting for newbies to want the best and all of the best now, I’m looking to build something in the 24 x 24 foot range. You said yours was approximately that size. Were you describing that main work area with or without the side side room where you stored the ash and shorter boards? Also how many 220 and 110 circuits do you have?
Hey! Yes, my main area is 26x26, then the closet butts Into some of it. That is not including the side room. Overall footprint is 32x32 if I remember correctly. I have 12 220volt outlets and 14 110 volt, all scattered around. I had the benefit of planning the space out for my shop, so had the electrical laid out for that. Lots of breakers!! Definitely go overboard if you can. Good luck!
Beautiful shop. Always envious of ppl who find killer deals on machines. I’ve not been lucky in that sense. I really appreciate the fact that you didn’t pull out every drawer and show every tool and misc stuff. That personally drives me nuts. I’m working towards doing my first RUclips myself soon. I only have a hobby shop however it’s metal and wood. Emphasis on metal. I’ve gotten a few pointers from watching this. Great job young man 👍🏼👍🏼
Thanks for the kind words and watching! I have lots planned for this channel and definitely looking to produce higher quality videos than this. I’ve been lucky for sure for good deals! Actually have a new addition already since filming!
Good luck with your channel!
Enjoy the neatness and organization. Also liked hearing about the amount of your tool investments. Nice shop!
Thanks!
Great layout!! Also the deals on marketplace that your able to find are insane!! Everything in my shop is new because of lack of marketplace woodworking tools in my area. $400 for that Oneida is just comical 😂
Thanks! And I have been lucky and patient enough for sure! Back when I needed basically all my tools I pretty much lived on Facebook marketplace refreshing the page all the time. 😂
I love the fact you went with blue walls. I wanted to do a colour but eventually chickened out and just went white with my walls 😂
It’s never too late! Just make sure you have good lighting if you are going to do a darker color.
Great tour. I’m envious of your shop’s neatness and organization. I have to say you have been fortunate with your Marketplace finds. Especially envious of your 12” planer! You must live in a less expensive area of the country. Best of luck making furniture!
Thanks! I’ve worked hard to keep the shop organized.
And I most certainly have been lucky! I’m located in Maine and it’s normally very pricy. I’ve been looking to upgrade my dust collector for 3 years and waited out till I found that deal! Patience is key!
Thanks for watching and the comment!
Great tour. I’m building out my shop now and the simplicity of your shop is inspiring
Thank you! Definitely thought workflow first and keeping it simple and easy to move around in was pretty important. I Definitely will grow into it with more tools eventually I’m sure, but as of now it works well!
Great workshop, awsome kit and well organised. I note you don't have a spindle moulder, obviously you manage with the router table.
I'm looking forward to watching your projects.
Thanks! I did have a spindle moulder for a little bit, but it did just seem too large for what I needed. I get away with routers and the router table. 👍
Great tour! I love the amount of space you have.
Also, i dont know if you noticed the darker bands that run across your screen. But if you up your shutter speed to 120 it’ll cancel it out. I’m assuming you have LED lights in your shop, that’s what would cause it.
Thank you! I noticed all that after the fact and unfortunately did not want to re shoot the whole video. 🙄 I appreciate the info! I normally am shooting off a dedicated light so this was my first time shooting off my leds for a longer video.
@@blacktenonfurnitureI totally get that lol. Most people wouldn’t notice it, but I fought it for a while in my shop. It all looked great though!
Great walk through - love the attitude that you're making the space beautiful as both a sales tool and for a positive working environment. 🍻
Thanks!! Definitely a priority for me. Sometimes it’s the little things (like my paint) that can make such a difference in a shops appearance!
Nice looking shop. I can definitely see some new/old refurbished hand tools coming into the shop in the future.
🫢🤩🤩
Awesome shop man! Thanks for sharing the great video! best of luck with the business and youtube!
Thanks for watching! 🙌
Nice dude! Can’t wait to see some more full length builds!!!
Thanks!! Hopefully will have a full one by the end of July!
Next upgrade - more light. My shop has a lot of deficiencies also so this is not meant as a great hit now. But this will bring back the most viewers in the future.
Shop crocs
Loved your tour! However, lighting is terrible! That's meant to be a constructive complaint! Keep up the good work. Looking forward to enjoying your other videos.
Yes I’m so bothered by it myself. 😭 I’m thinking of remaking the whole thing because it’s so bad (at the time I didn’t want to re-film anything). It’s in none of my other videos, just botched it for this one. 🤷 Thanks for the constructive criticism and the comment!
Nice shop. Glad you shared your story of progression as it’s tempting for newbies to want the best and all of the best now, I’m looking to build something in the 24 x 24 foot range. You said yours was approximately that size. Were you describing that main work area with or without the side side room where you stored the ash and shorter boards? Also how many 220 and 110 circuits do you have?
Hey! Yes, my main area is 26x26, then the closet butts Into some of it. That is not including the side room. Overall footprint is 32x32 if I remember correctly.
I have 12 220volt outlets and 14 110 volt, all scattered around. I had the benefit of planning the space out for my shop, so had the electrical laid out for that. Lots of breakers!! Definitely go overboard if you can. Good luck!
Lusting
The shadow that keeps going over the screen is quite distracting but a good video none the less
Yes! Sorry about that, I have since learned how to avoid that. My future videos will not have this issue! Thanks for watching still!
I have a hillbilly woodshop compared to yours 😅
I’m very grateful to have this shop!