I watched this video to know what to do to make my cardboard sword sturdy and all that but what you did in this video is just pure genius using cardboard on the inside of the blade and using thin card board for the slant of the blade and the gard on the hilt what you did was very smart over all I love it thank you.
Comments like this are the best thing on RUclips. These ones give me strength to make even more videos. I am for now quite busy. So I cannot promise when next video is coming, but I do have some ideas for the future.
Llevo invertifo tiempo una semana tratando de hacer una espada de carton para un evento...y no funciona...ahora ya vi tu video y asi la hare..felicidades y gracias..es genial
Hi, I use two different thickness craft papers and a normal one layer cardboard box cardboard. As what to do with craft paper. Choose as thick you can find and other one can be something like normal paper in thicnes.
Nice video bro, I already downloaded the templates for the Excalibur I'll paint the sword, do you have some tips? Or just don't paint the sword? Cause I was thinking to do some little combats with my young brother hehe The Excalibur it's a beautiful sword
@@Danielmchanderson It's is hot just out of glue gun, but it cools down pretty fast. There are also differences with glue guns. This one does not heat glue that much. My old glue gun was a different beast at heating glue. It was steaming hot.
I watched this video to know what to do to make my cardboard sword sturdy and all that but what you did in this video is just pure genius using cardboard on the inside of the blade and using thin card board for the slant of the blade and the gard on the hilt what you did was very smart over all I love it thank you.
Comments like this are the best thing on RUclips. These ones give me strength to make even more videos. I am for now quite busy. So I cannot promise when next video is coming, but I do have some ideas for the future.
@@MysticBuild umm thank you im not used to um people thanking me or saying anything nice to me so umm thank you
Omg he is so good
This is so cool
top notch S tier build, but why is no one talking about how he literally wipes hot glue off the cardboard with his bare finger... insanity.
Honestly, like the way they made each cut and line so perfectly, and of course the hot glue thing. This person HAS to be a machine 💀
Low temp hot glue! Very convenient for crafters
I swiped the hot glue too… my thumb is red now 😅😅😅
i’m going to gaslight everyone into thinking my sword is a pen
😉
Percy, is that you? 😝
Bro read one page of Percy Jackson
PERCY???
Amazing Temnplate Thank you Very Much
np
being a total fan of merlin i love this sword
Llevo invertifo tiempo una semana tratando de hacer una espada de carton para un evento...y no funciona...ahora ya vi tu video y asi la hare..felicidades y gracias..es genial
Is it sturdy enough for duals
I do my own cosplay props with cardboard this is what I needed
Love your build, it is very high quality
I will make it same like this😁 Thank you brother ❤️
Nice 😊
Question about the hilt: do I hot glue the cardboard strips on both sides?
nope, just for cosplay
I followed u since u had 403 followers😍 now u growed!! But i still love ur work! Keep it going bro
Nice, 403 subs was a long time ago. Thanks for the long time support! 😊
The handle is pure genius but the sword part is too difficult for me
Gap yoq juda zor chiqan😮😮😮😮
i dont really have any cardboard paper, but could i just use box cardboard for the outside of the blade?
You are the great person🎉
Great tutorial, thank you. May I ask how thick is the cardboard?
Hi, I use two different thickness craft papers and a normal one layer cardboard box cardboard. As what to do with craft paper. Choose as thick you can find and other one can be something like normal paper in thicnes.
@@MysticBuild hi can I use a cardboard the thickness used for shipping items thanks
@@johnvonmartin7501 You can use whatever cardboard you want
@@MysticBuildsounds good thanks
@@johnvonmartin7501 np
Waaaa soso beautiful thanks
😊
Will the sword break if I make the sword just a little longer?
Only one way to find out
me voy a aventurar a hacerla, regreso y es cuento😏
How are they so straight and perfect? What knife are u using
Just a normal hobbyknife
Las medidas, por favor
Excellent 👌👍
Thanks!
Thank you to your build its great
Grt bro. I gotcha u frm 702 subs I will be with u.
Thanks for the long time support! Under 1k subs are exceptional!
@@MysticBuild yep wels
Good job, its amazing!!
Thanks!
It looks like adventure time's sword.... I LOVE IT!
Thanks!
@@MysticBuild :)
@@paulsolomon683 😉
Muito bom 😃
Bro u are growing grt. If u remember me I followed u frm 320 subs. Grt
Thanks for the long time support!
@@MysticBuild wels bro
Muito bom
Nice video bro, I already downloaded the templates for the Excalibur
I'll paint the sword, do you have some tips? Or just don't paint the sword?
Cause I was thinking to do some little combats with my young brother hehe
The Excalibur it's a beautiful sword
You can check out my videos where I paint swords and knives, for more tips on painting
@@MysticBuild thanks bro 😁✌🏻
@@MysticBuild maybe you can paint one of your swords like the big Bertha or/and the royal Guardian
I think it's a great idea
@@gustavodaniel2820 maybe
@@gustavodaniel2820 np
Can you tell me the size pls
check templates
will this still work with normal glue?
I think so
Are setting craft paper or carboard in the side after sticking all the strips.
Please reply
craft paper
What’s the fuller made of?
I use old cardboard boxes, hot glue and craft paper
How much inch and size is the sword? Wanted to know for our school project, thanks in advance
You need to check my templates
what type of cardboard do you use and where do you get it?
I use old cardboard boxes and craft paper
@@MysticBuild how do you cut such straight lines?
have u tried using eva foam for this instead?
nope
What Materials did you use
cardboard, craft paper and hot glue
Question, is this durable for kids doing swordfights?
nope, it's good for cosplay
@@MysticBuild ohh ok I see thanks
@@Nost-tea np
what graphing paper do you use? please reply
just a normal paper that is on all store
Bro what arr items to make this
Craft paper, old cardboard boxes and hot glue
I wonder how i could upscale this to make an actual well, LONG sword
I think that is a maximum size for cardboard. I need to think about making one that is stronger and bigger...
I like this very much now I also learned how to make thankyou so much😍.
Love from india.
Thanks!
bro, what is dat chocolate paper that you use, can i use drawing papers for it's substitute if i dont have it?
It's craft paper. You can use what ever paper you have
How long is the sword?
Check out templates.
Link for the templates is on video description
nice
Thanks!
Would you need Craft paper or can you just use regular cardboard the whole time?
I use craft paper, but you can use whatever you have
😳 wow
😃
Its looks like the golden sword from adventer time
Really?
Hey any template pictures for this?
Yes there are templates, for this one
I’m sorry but how are you just wiping hot glue away and pushing thin cardboard on hot glue just how it’s impressive
I'am not sure what do you mean?
@@MysticBuild I mean isn’t it burning hot?
@@Danielmchanderson It's is hot just out of glue gun, but it cools down pretty fast. There are also differences with glue guns. This one does not heat glue that much. My old glue gun was a different beast at heating glue. It was steaming hot.
Frumos
Uhm sir the video is very helpful but can you give me the materials 😁
Y want one
I. Feel like you should have put the conederash that a child that does not have these supplies could not do this project
I don't really understand what do you mean? I have plenty of videos where you can check out more tips
Make sword of geralt of rivia the witcher
maybe
@@MysticBuild thanks bro
Op
😎
Where are u now
Make this easier pks
Pls
Плыли мы по морю ветер мачту рвал капитан
с корабля сбежалЯ стоял на лодкехлвлвлвлвлалалалалашкшшшдал
Please make this sword fore me I will give money please I like your swords and dagger plz make this sword for me plz
Sorry, you have to make it yourself 😉
This seems kinda hard to me bro..😭😨
This one is not the easiest to make. There are some easier cardboard swords in my videos. You may want to check them out.
Not first
What do you mean?
@@MysticBuild That I’m not first
@@simonmell6242 hmm, ok
how long is the sword?
Muito bom