ASKO WMC 55 Pro - P1 Normal Wash + Prewash 90ºC
HTML-код
- Опубликовано: 20 сен 2024
- THIS WASHER HAS BEEN SOLD "9-3-2017"
I've changed the program version, to Mop version, and coded the tempretures for each prog, the Mop version adds a Prewash to P2 aswell so there are two programs with Prewash P1/P2, the P5 Superquick prog is replaced with P5 Normal 40'C, and P8 which wash Spin only, is replaced by Rinse prog with final spin.
So if I get this straight:
You can choose 4 program lists and make your own programs or?
You don't need so much powder. If u want to be economy or save some money so can u take 7-9ml for 1kg. That's normally
have changed too the max spin of spin from 1200 rpm at 1000 rpm?
+Massimo De Bartolomeo No the max spin speed is 1000 RPM, it can not be changed
I have asko. Don't really see much water during main wash whereas miele seems to use a lot more? But from stats miele claims to use less water I think. So weird
Hi, my Asko WMC 55, is a industrial version, which uses much more water for washing and rinsing than the household Asko washers, and has very short wash programmes, and the stats about water usage on the Miele is only for the standard Cottons prog, if you use any other programmes, or use extra options, also depending on load size, water consumption can differ.
how much is this industrial version asko? does it use the same power socket and voltage and water suppler in domestic homes ? which country you from? did you consider the miele conmercial washers ? they look nice and have very short cycles too.
also is this asko machine reliable ? any problem you had yet ? how long you had it for?
my asko is working perfectly to date, had it for 3 yrs now, but read a lot of online reviews , only have 2.5 stars out of 5, so a bit worried that my asko might have some faults any days now , lol
also, u seem to use a lot of washer powder, if it according to the user manual ? for me a full oad only use a small scoop, i use eco store washing power,
The reason for using this much powder is because, its not concentrated, its just regular /standard powder, so you need to use this much.
The difference between the Asko Pro version and Domestic version is that the Pro, has 2 heaters, (2000W+1000W),
it can run on 3phase 400V 10A/ or standard 230V 16A/ 230V 10A. water supply is the same as the domestic version, also the Pro has the Hot water inlet valve, so you can use it with hot water, also possible to convert it from drain pump to have a Drain Valve, and option to connect it to Coin paying system. this Asko, is made in 2007, i bought it used 5 month ago, its been reliable with no problem, but i'm only using it as a 2nd washer, so it nearly dont get used at all, only 1-2 washes per week.
i have a Asko branded Maytag model MAF9601, you can see on my channel, could i do this to that?
+Ilove Servis What do want to change on it?
Here's a link to the Asko WM50 Service Manual, which is what you Maytag MAF9601 is based on, and scroll down to page 7 and 8, there it show how to reprogram the washer, if you have any more questions when fell free to ask :-) www.mediafire.com/download/1hocha1jm71cfq4/wm50_asko_washing_machine.pdf
Electroluxwasher Thanks, i was just wondering whether there was any hidden programs
+Ilove Servis on your model there are no hidden programs, there only the ones listed on the program dial
i wish mine did high level rinses
+Ilove Servis Well it already have it, on yours its the E2 economy button, but to change it from E2 to Highter Waterlevel in the mainwash and rinses, you need to, open the top, were the control board is, then you need to break off the J1 tap on the control board, its all explained in the Service Manual, if you want to do that mod :-)
www.mediafire.com/download/1hocha1jm71cfq4/wm50_asko_washing_machine.pdf
+Electroluxwasher How did i not see that the other day lol, thanks so much, i actually have to break it as its brake a piece of wood in half or what?
+Ilove Servis on the right side on the Board connector E14 there is some pins sticking out, named J1,J2,J3,J4,J5, depending on which options your washer have, some of them might aldready been broken off from the factory, here's a pic of the board which is from my Asko, but the board on yours is the same. on mine J3,J4,J5 was already broken off from new.
if you decide to do it, you have to be careful at not break it past into the board itself, as that could damage it,
s32.postimg.org/m7x7od7ph/IMG_0642.jpg
Electroluxwasher Ah i see now thanks, so once it is done it cant be reverted
+Ilove Servis yes when you break of the tap, you cant revert back again
Rather slow pump for a commercial washer IMO.
Well it does have the option to install a Drain Valve instead, just need to change the settings in the electronic after :-)